Toyo Kensetsu Kohki Co., Ltd. Product Lineup

- Optimal for single and double anchors from D16 to D38. *However, double anchor processing for SD390 D38 is not possible. - Automatically supplies rebar from the material stand to the bending machine and retrieves the processed products. - Long-length processing can also be done by one person. - Angle settings can be adjusted with a dial, allowing for two different angles to be set. - Large radius processing is possible (φ250, φ300, φ400 / φ500, 600).

• Other machine tools

- Automating the material supply work for the automatic cutting machine - Supplying fixed-length materials to the conveyor of the automatic cutting machine one by one - Reducing the operator's manual handling effort - Able to count the number of pieces, allowing for the supply of only the necessary amount to the conveyor

• Other machine tools

- Adoption of band saw cutting to improve the workability of pressure welding and the accuracy of cut surfaces and dimensions of threaded rebar. - Capable of cutting four types of standard-length materials in combination. - Easy dimension setting via data input on a touch panel. - Cutting blade width is 330mm (can cut 9 D25 bars simultaneously). - Conveyor lengths are 12m x 12m and 13m x 13m. - TLINKS model (equipped with IoT devices). - Remote control can be installed as an option.

• Other machine tools

- Adoption of band saw cutting to improve the workability of pressure welding and the accuracy of cut surfaces and dimensions of threaded rebar. - Simultaneous cutting of 9 D51 bars and automatic cutting of large diameter rebar, capable of cutting large quantities of SD490 and above. - Easy dimension setting via data input on a touch panel. - Improved workability with remote control operation. - Cutting blade width is 600mm (capable of simultaneously cutting 18 D25 bars). - Conveyor lengths are 12m x 12m and 13m x 13m. - Options: Bar counter and QR data reading. - TLINKS model (equipped with IoT devices).

• Other machine tools

- Automation of the labor-intensive material feeding to dropping in rebar cutting - Uses a special belt to reduce noise during material transport - Equipped with cutting machine MC-41 - Cutting blade width is 125mm (can cut 10 D10 bars simultaneously) - Conveyor lengths are 6m×7m, 8m×9m, and 10m×10m

• Other machine tools

- Capable of large-scale automatic cutting and large stock. - Cutting dimension settings and drop position settings with a toggle switch. - Capable of two types of combined cutting. - Conveyor lengths are 8m x 9m, 10m x 10m, and 12m x 12m. - Cutting blade width is 225mm (can cut 18 D10s simultaneously).

• Other machine tools

- First-ever belt conveyor cutting method!! Capable of cutting two types of fixed-length materials together - Adoption of belt conveyor method reduces transportation noise - The cutting machine is equipped with MC-41 *Compatible with high-strength rebar (SD490) up to D32 - Cutting length can be set in 1mm increments - Data input via touch panel - Cutting blade width is 125mm (can cut 10 D10 bars simultaneously) - Conveyor lengths are 6m x 7m and 8m x 9m - TLINKS model (equipped with IoT devices) - Optional QR data reading capability available

• Other machine tools

- Capable of large-scale automatic cutting and large stock. - Cutting length can be set in 1mm increments. - Data input is easy with a touch panel for dimension settings. - Easy to set up combinations and drop positions. - Capable of cutting two types of standard materials in combination. - In line specifications, capable of cutting four types of combinations. - Conveyor lengths are 8m x 9m, 10m x 10m, and 12m x 12m. - Efficient transport is possible when combined with TAS-II or TS-V. - Cutting blade width is 300mm (can cut 25 D10s simultaneously). - TLINKS model (equipped with IoT devices). - Options: piece counter and QR data reading.

• Other machine tools

- Industry first! High-strength rebar SD590 D51 compatible model - Capable of automatic transport up to 900mm (TFC-LA1250mm) - Equipped with a residual material discharge device - Adoption of belt conveyor system reduces transport noise - Cutting length can be set in 1mm increments - Data input via touch panel - Cutting blade width is 300mm (can cut 25 D10 bars simultaneously) - Conveyor lengths: 8m x 9m, 10m x 10m, 12m x 12m - TLINKS model (equipped with IoT devices) - Reading of processing dimensions using QR reader - Different processing efficiency for thin materials, can be linked with alignment supply device model: TAS-II

• Other machine tools

- Processing possible from D10 to D25 - Effective for long-length processing - Data input is possible via a touch panel, allowing for bending shape and dimension settings - The touch panel is centrally located on the device for easy input - TLINKS model (equipped with IoT devices)

• Other machine tools

- Processing possible from D10 to D25 - Effective for long-length processing - Data input is done via a touch panel, allowing for bend shape settings - The touch panel is centrally located on the device for easy input - An optional length counter can be installed

• Other machine tools

- Processing is possible for D10 to D16. - Data entry is done via a touch panel, allowing for bending shape settings. - The touch panel is located in the center of the device, making changes to the processing shape efficient. - Changing the rebar diameter is easy to set up.

• Other machine tools

- Ideal for high-strength steel processing, closed-type hoops, railway (Shinkansen) construction, and building construction. - Compatible with high-strength SD785 D10 to D16 (SD490 D10 to D25). - Fixes rebar with a chucking device to improve the quality of processed products. - Data input via a touch panel allows for bending shape, dimensions, and angle settings. - The touch panel is centrally located on the device to reduce the operator's movement burden. - Improved bending accuracy using an inverter, considering material properties. - Built-in piece counter reduces the workload of confirming the number of pieces. - TLINKS model (equipped with IoT devices). - QR data reading capability available as an option.

• Other machine tools

- Model change implemented, increasing simultaneous processing count!! (D10 x 7 pieces, D13 x 5 pieces) - Automatic bending device capable of processing D10 to D16 - Capable of both upward and downward bending, making complex processing easy - Ideal for processing that requires reverse bending of slab rebar, balcony rebar, residential foundation rebar, etc., as well as small dimension bending - Improves product quality by fixing rebar with a chucking device - Recommended for a wide variety of processing - Data input is easy for anyone via a touch panel, allowing for bending shape, dimensions, and angle settings - Built-in piece counter reduces the workload of confirming the number of pieces - TLINKS model (equipped with IoT devices) - QR data reading support available as an option

• Other machine tools

- Can be installed in a space-saving manner Installed at the rear of standard products Different materials can be used with the lower material platform and the upper additional option platform - Can carry up to 3 tons! - Arm operation with a single handle operation

• Other machine tools

Model change for TFC-M-HTV - Speed increased by 33% through structural changes The drive system has been completely revamped from chain to rack and pinion mechanism! Achieving a 33% increase in speed while ensuring high precision. - New feature: Next process reservation system Reserve the next process during machining to eliminate machine downtime! Improved production efficiency through seamless continuous processing. - Enhanced operability with a larger screen Screen size expanded from 5.7 inches to 10.4 inches! Eliminating the hassle of screen switching, improving work efficiency with easy-to-understand operations and high visibility.

• Other machine tools

Model change for TFC-M-H - Expanded compatible diameter from D38 to D41, significantly increasing the processing area. Enhanced conveyor rigidity allows for cutting of D41 and SD490! - Achieving high precision and high efficiency work through laser measurement. Adoption of laser distance measurement resolves issues such as scale wear! Digital display improves operability for dimension settings. - Easy to clean, creating a comfortable working environment. Improved cleanliness and working conditions by streamlining scrap processing and preventing accumulation of iron powder and wire on the material table. Optional installation of a scrap bucket is available. - Conveyor lengths are 8m x 9m, 10m x 10m, and 12m x 12m.

• Other machine tools

- Cutting and bending of bar materials from D10 to D22 (SD295 to SD490) can be performed in a series of processes. - Multiple pieces can be processed, and 3D processing is possible. - Equipped with rib node detection function. - TLINKS model (equipped with IoT devices).

• Other machine tools

Product Features Finally here to meet customer needs. The first NC (Numerical Control) implementation of angle and dimension in the main rebar automatic bending series. *The movement of the stop is manual. This product qualifies for the small and medium-sized enterprise labor-saving investment subsidy. - Added processing for D16, expanding the specification range. - Compatible with materials from D16 to D41 (SD490) for processing. *Standard pivot roller 6D. - Considering the influence of deformed bars, threaded rebar, material, manufacturer, etc., optional correction is possible. - Processes the main rebar into vertical bends, improving space efficiency and safety. - Capable of large radius processing (250, 300, 400, 500, 600). *700 and 800 are optional. - Expansion of options starting August 2025: support for pivot rollers (7D, 8D). - TLINKS model (equipped with IoT devices). - QR data reading support available as an option.

• Other machine tools

Product Features - Processing machines for D10 to D16. - Bend shapes, dimensions, and angle settings can be configured via a touch panel. - The touch panel is centrally located on the device for efficient setup changes. - Built-in piece counter reduces the workload of counting pieces. - Equipped with bend speed variable function. - TLINKS model (equipped with IoT devices). - QR data reading capability available as an option.

• Other machine tools

This device is equipped with a function that can count the number of processed items. It can count using either an addition counter or a subtraction counter. Additionally, for models without a screen, such as the "TBS-13-6," a small screen can be installed for added functionality. 【Features】 ■ Function to count the number of processed items ■ Addition counter = Direct display of the number of items processed ■ Subtraction counter = Set the required number, and it will start counting down, finishing processing at the set number ■ Compatibility with existing machines is also possible *For more details, please refer to the external link page or feel free to contact us.

• others

The "C-43" is a strong and durable rebar cutting machine. It features a compact design due to the adoption of a special reduction mechanism. The required breaker capacity is 30A. 【Features】 ■ Strong and durable ■ Adoption of a special reduction mechanism ■ Compact design *For more details, please refer to the external link page or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "FM-4000UD" is a mesh bending machine suitable for processing welded wire mesh required for residential foundations. Since it can bend both up and down, there is no need to flip the rebar. Data input is done via a touch panel, allowing for angle settings. It supports various lengths, including production of up to 4500mm. 【Features】 ■ Well-suited for processing welded wire mesh required for residential foundations ■ No need to flip the rebar due to the ability to bend both up and down ■ Capable of producing various lengths, including 4500mm ■ Data input via touch panel allows for angle settings *For more details, please refer to the external link page or feel free to contact us.

• Other processing machines

The "FMI Series" is a mesh bending machine using the involute method. It is suitable for processing box culverts, U-shaped ditches, retaining walls, and more. Angle settings are done via a touch panel. Additionally, the bending pivot can be set at any position, accommodating mesh products with irregular pitches. 【Features】 ■ Suitable for processing box culverts, U-shaped ditches, retaining walls, etc. ■ Involute method ■ Angle settings via touch panel ■ In arbitrary mode, up to 8 types of angle settings are possible (with automatic feed function) ■ Bending pivot can be set at any position, accommodating mesh products with irregular pitches *For more details, please refer to the external link page or feel free to contact us.

• Other processing machines

The "EBA S Series" is a rebar cutting and bending machine for coil materials handled by Toyo Construction Machinery from Progress Corporation. We have a display machine (EBA S16 3D) at our Tokyo factory. Please feel free to contact us if you would like to visit the display machine. 【Features】 ■ Rebar cutting and bending machine for coil materials ■ Capable of 3D bending *For more details, please refer to the external link page or feel free to contact us.

• Other processing machines

The "TEB-19-NCV" is a rebar automatic bending device suitable for processing a variety of slab reinforcement bars in large quantities. Combining it with a cutting machine improves processing efficiency. The automatic counting of pieces contributes to the reduction of waste. 【Features】 ■ Ideal for processing a variety of slab reinforcement bars in large quantities ■ Improved processing efficiency when combined with a cutting machine ■ Reduction of waste through automatic counting of pieces *For more details, please refer to the external link page or feel free to contact us.

• Other processing machines

The "TCS-550" is a conveyor that transports products processed by automatic rebar bending machines and similar equipment. It ensures stable transportation regardless of the size of the products. By using multiple units, it is possible to transport long items (in parallel installation) or over long distances (in series installation). 【Features】 ■ Transports products processed by automatic rebar bending machines and similar equipment ■ Stable transportation regardless of product size ■ Capable of transporting long items and over long distances with multiple units ■ Conveyor length: 5300mm *For more details, please refer to the external link page or feel free to contact us.

• Conveyor

The "TS-V" is a supply device that reduces the hassle of moving materials with a crane. It automatically supplies cut materials to the rebar automatic bending machine. It supplies from the rebar automatic cutting machine (TFC-M, MA, L, LA, LL, LLA) to the rebar automatic bending machine (TBS series, TBM series). 【Features】 ■ Automatically supplies cut materials to the rebar automatic bending machine ■ Reduces the hassle of moving with a crane ■ Supplies from the rebar automatic cutting machine to the rebar automatic bending machine *For more details, please refer to the external link page or feel free to contact us.

• Other conveying machines

The "TFC-MAV" is a rebar automatic cutting machine compatible with QR codes. It allows for large-scale automatic cutting and extensive stock management. In addition to being able to cut two types of standard-length materials together, it can also cut four types together when configured for line specifications. Furthermore, by combining it with "TAS-II" or "TS-V," efficient transportation becomes possible. 【Features】 ■ Cutting lengths can be set in 1mm increments ■ Data input is easy with a touch panel for dimension settings ■ Simple settings for combinations and drop positions ■ Conveyor lengths: 8m×9m, 10m×10m, 12m×12m ■ Cutting blade width is 225mm (can cut 18 D10 bars simultaneously) ■ An optional bar counter can be installed *For more details, please refer to the external link page or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "TFC-LLAV" is a rebar automatic cutting machine capable of mass automatic cutting and large stock management. Data input can be easily set using a touch panel for dimension settings. It also allows for the cutting of four types of standard materials in combination. Furthermore, by combining it with "TAS-II" or "TS-V," efficient transportation becomes possible. 【Features】 ■ Cutting length can be set in 1mm increments ■ Easy setting for combinations and drop positions ■ Conveyor lengths: 8m×9m, 10m×10m, 12m×12m ■ Cutting blade width is 460mm (capable of cutting 40 D10 bars simultaneously) ■ An optional bar counter can be installed *For more details, please refer to the external link page or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "CS-185HBV" is a cutting machine that automates the labor-intensive process of feeding and dropping rebar during cutting. The cutting length can be set in 1mm increments. Additionally, it uses a special belt that reduces noise during material transport. It is also compatible with QR codes. 【Details】 ■ The cutting machine is equipped with MC-51W *Compatible with high-strength rebar (SD490) up to D38 ■ Data input is via a touch panel ■ The cutting blade width is 190mm (can cut 16 D10 bars simultaneously) ■ Conveyor lengths are available in 8m×9m, 10m×10m, and 12m×12m *For more details, please download the PDF or feel free to contact us.

• Plastic processing machines (cutting and rolling)