東朋テクノロジー Product Lineup

In the agricultural sector, the introduction of automation systems is progressing to improve productivity and reduce labor. PLCs play a central role in these systems and are used to control various equipment. However, due to the aging of existing PLCs and the end of manufacturer support, the need for updates is increasing. Updating PLCs can lead to system downtime, delays in associated work, and increased costs. Our PLC conversion adapter facilitates the renewal of PLCs and supports stable system operation. 【Usage Scenarios】 * Control of irrigation systems * Control of temperature and humidity management systems * Control of sorting and weighing systems 【Benefits of Implementation】 * Shortened construction period during PLC updates * Reduced update costs * Stable system operation

• AC adapter

In the logistics industry's inventory management systems, updating PLCs significantly impacts operational efficiency. Particularly when using outdated PLCs, challenges arise in data acquisition and system integration, making accurate inventory management difficult. PLC conversion adapters facilitate data conversion between different PLC manufacturers, supporting smooth updates of inventory management systems. 【Usage Scenarios】 - Automation systems within warehouses - Inbound and outbound management systems - Inventory data collection systems 【Benefits of Implementation】 - Reduction in labor hours during PLC updates - Increased efficiency in system integration - Achievement of accurate inventory management

• AC adapter

In the energy-saving transformation of factories, updating existing PLCs is an important issue. Aging PLCs can lead to decreased power consumption efficiency and deteriorated control accuracy, ultimately resulting in increased energy costs. Additionally, updating PLCs often requires significant time and expense. Toho Technology's PLC conversion adapter contributes to reducing construction time and costs during PLC updates. 【Usage Scenarios】 - Updating aging PLCs - Replacing PLCs for energy-saving purposes - Implementing a system for visualizing power consumption 【Benefits of Implementation】 - Reduction in labor for PLC update construction - Reduction in update costs - Decrease in power costs due to energy savings

• AC adapter

In the building management industry, there is a demand to efficiently update existing PLC systems for remote monitoring of equipment and to reduce operational costs. In particular, updating aging PLCs tends to lead to prolonged construction periods and high costs. PLC conversion adapters facilitate updates between different PLC manufacturers and significantly reduce labor hours, addressing these challenges. 【Usage Scenarios】 * Updating existing PLC systems * Building remote monitoring systems * Mixed environments with various manufacturers' PLCs 【Benefits of Implementation】 * Shortened construction periods * Reduced update costs * Stable system operation

• AC adapter

In the manufacturing industry, the complexity of wiring tasks associated with PLC updates is a significant challenge. In particular, replacing aging PLCs or upgrading to PLCs from different manufacturers can lead to wiring errors and increased work time, potentially reducing production efficiency. PLC conversion adapters address these issues and simplify wiring tasks. Toho Technology's PLC conversion adapters are compatible with over 15 manufacturers both domestically and internationally, boasting a wealth of update experience. They also support parallel operation updates of new and old equipment, providing products tailored to the specific conditions of the site. 【Usage Scenarios】 - Wiring tasks during PLC updates - Connections between different PLC manufacturers - Expansion or modification of equipment 【Benefits of Implementation】 - Reduction in wiring labor - Decrease in update costs - Shortening of work time - Improvement in productivity

• AC adapter

The "PLC Conversion Adapter PS Series" handled by Toho Technology Co., Ltd. is a product with a wealth of update experience that can support over 15 manufacturers both domestically and internationally. It is compatible with various updates including PLCs, DCS, and dedicated controllers. We provide products tailored to the site, such as parallel operation updates for new and old equipment. 【Features】 ■ Easy updates to different PLC manufacturers ■ Significant reduction in labor hours ■ Supports 16-point and 32-point cards ■ Offers circuit direct connection type and voltage conversion type ■ Compatible with various applications ■ Various conversion cables available (connector connection, terminal block connection, etc.) ■ Custom mounting fabrication is also possible ■ Customization available for unique customer specifications *For more details, please refer to the PDF document or feel free to contact us.

• AC adapter

With compatibility for 16-point and 32-point PLCs, it is convenient for designing equipment layouts in control panels! ◇ A harness set compatible with Mitsubishi Electric's Q/i-Q series sequencers is available (32 points only). It is possible to arrange the relay terminal main unit and harness in one model. ◇ The mounted relays can be freely selected from a contacts, b contacts, SSR, etc. ◇ Terminal screws adopt an M3.5 size suitable for external wiring. ◇ The unit indicates when the relay is ON with an LED mounted on it. ◇ It is optimal as an interface unit for solenoid valve circuits. ◇ Equipped with Fuji Electric's RB series (small relays). Due to gold-plated contacts, it is also ideal for switching micro loads. (Minimum applicable load reference value: DC0.1V 0.1mA) ◇ Compared to our conventional PXGR series products, power consumption is cut by about 40%. ◇ A new input wet circuit type has been added to the lineup (16 points with 1 common).

• Other terminal blocks
• relay

The purpose is determined, but there is no product information, and I don't know where to start looking. In such cases, please refer to the reverse lookup guidance. We have listed the product names of our products that match various purposes. There may be other options available beyond those listed. Even if you can't find a product, please feel free to consult us! We can also customize according to your needs and budget.

• Terminal Blocks

By adopting the remote I/O connector "TKN Series," you can connect to your preferred relay terminal from our company. It is effective when wiring an additional relay externally to the relay output module of other companies' remote I/O, and connecting it to external loads. The "TKN Series" is compatible with "CC-Link," "Profibus," and "TOLINE (Tōhō's transmission system)." This allows for a simple configuration of connections between these networks and field loads, contributing to your company's profit increase.

• Terminal Blocks

<Case Study> Our conversion adapter compatible with Paralan was adopted for the update of Yaskawa PLCs at a certain steelworks. To mitigate risks during the update, it was a mandatory requirement from the user to perform the update using Paralan. <Result> By using the existing PLC-compatible conversion adapter, we were able to reduce the wiring work to about one-third compared to rewiring. Additionally, using the Paralan-compatible adapter made it easy to establish a Paralan environment. Since the new PLC could be installed while the equipment was running and data could be collected from the existing PLC, sufficient time could be allocated for software verification, enabling a PLC update with minimal risk of issues.

• Terminal Blocks

This document is a guide for the introduction of special terminal blocks. It features products such as the "Connector Terminal Block UCK Series," which significantly reduces wiring and maintenance labor costs, as well as the "Disconnection Terminal Block UK Series" and "Branch Terminal Block UCTB Series," along with product images and features. ◆ Includes numerous listings for overseas UL standards! ◆ ISO9001 and 14001 certified Please use this for selecting products. 【Featured Products (Excerpt)】 ■ Connector Terminal Block TKC Series ■ Connector Block Terminal Block UCK Series ■ Disconnection Terminal Block UK Series ■ Circuit Protection Terminal Block UK-SD and UK-F15 Series ■ Branch Terminal Block UCTB Series *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks
• Other terminal blocks
• Connector Terminal Block

This document is a guide for the introduction of relay terminals. It features the "PXGR series" equipped with G7T relays, which supports a wide range of voltage specifications, along with product images and characteristics of the "PXMY series" and "PX7FR series." By consolidating functions that were previously distributed within control panels into a single unit, it achieves reduced wiring labor and space-saving. (ISO9001 and ISO14001 certified) Please make use of this for product selection. 【Featured Products (Excerpt)】 ■ PXGR series (equipped with G7T relay) ■ PXGRS series (with switch) ■ PXGRF series (with fuse) ■ PXGRM series (with fuse/switch) ■ PXMY series (equipped with power relay) *For more details, please refer to the PDF technical documentation or feel free to contact us.

• relay
• relay

【Features】 ◆ A relay connector terminal block that converts a D-sub connector (9-pin type) to a terminal block ◆ Compact size of 64mm x 63mm 【Model Numbers】 ■ PX7D-DSUB9… Screw-up type (anti-fall screw) ■ PX7D-DSUB9D… Screw-up type with circuit board cover ■ PS7D-DSUB9… Self-up type (standard screw) ■ PS7D-DSUB9D… Self-up type with circuit board cover The standard screws for fixing the connector are M2.6 metric screws. If inch screws are required, please indicate "4-40" at the end of the model number. *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks
• Other machine elements

【Features】 ■ RoHS compliant ■ Improved connection reliability with gold contacts, suitable for low loads! ■ Available in 2-position and 3-position options ■ Finger protect (IP20 safety standard) with screw-up type to protect the charging section *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks

【Features】 ■ RoHS compliant ■ High load switching possible due to fast cutoff ■ Equipped with a locking mechanism to prevent malfunction ■ Finger protect (IP20 safety standard) with screw-up type to protect the charging part ■ Low-profile type with a height of 45mm * For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks

【Features】 ■ Significantly reduces cable connection labor! ■ All poles can be easily detached with one touch without removing the pre-wired cables. ■ Finger-protect type focused on safety (IP20 safety standard). ■ Certified to UL, CSA, and EN standards, ensuring safe use even in overseas fields. ■ A safety cover that protects the contact area (connector part) can be attached when the terminal block is separated. ■ Screws do not fall out, allowing for smooth wiring. ■ A lineup of products compatible with microcurrent (UCK15S1, UCK15S1/4, UKCP15S1). *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks

【Features】 ■ Direct mounting and 35mm wide DIN rail mounting are possible ■ Equipped with an earth screw ■ The terminal section can be selected from two types: "self-up type" or "screw-up type" ■ Can be connected to servo amplifiers from various manufacturers * For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks

【Features】 ■ A lineup of types that allow for circuit opening and switching operations. ■ Types that accommodate small currents such as instrumentation signals and analog signals, as well as rated voltages up to 1000V. ■ A c-contact type is also available, which is convenient for switching operations during equipment replacement. ■ No need to worry about misoperation when using a stopper (optional). ■ Simultaneous opening and closing of up to two poles is possible with the use of a connecting rod (optional). ■ The terminal section adopts a screw-up type to prevent screw drop-out and shorten wiring work. ■ Compliant with overseas UL standards and more. *For more details, please refer to the PDF technical materials or feel free to contact us.

• Terminal Blocks

【Features】 ■ Available I/O points: 8, 16, and 32 points ■ "L type" with reversed wiring direction available ■ Output specifications can be changed to b contact output or SSR by replacing the relay ■ Relay replacement can be easily performed with lever operation ■ Devices with sink or source connections can be connected ■ "DRY circuit" and "WET circuit" options available ■ Can be mounted on a 35mm wide DIN rail *For more details, please refer to the PDF technical documentation or feel free to contact us.

• relay
• relay

【Features】 ■ Direct control of output via switch selection ■ Compatible with b contact output and SSR through relay replacement ■ Devices with sink and source connections can be connected ■ Relay replacement can be easily performed with lever operation ■ Can be mounted on a 35mm wide DIN rail ■ Available in "DRY circuit" and "WET circuit" options ■ Three types of terminal sections are available ■ Ideal for equipment trial runs, debugging, and maintenance *For more details, please refer to the PDF technical documentation or feel free to contact us.

• relay
• relay

【Features】 ■ Direct control of output is possible with a switch toggle! ■ Reduces wiring labor and saves space in equipment ■ Combines relay, fuse, and switch into one unit ■ Offers "single-pole fuse" and "double-pole fuse" options ■ Signals are extracted and displayed simultaneously when the fuse blows ■ Allows for specification changes to b-contact output or SSR by replacing the relay ■ Compatible with both sink and source devices ■ Relay replacement can be easily performed with lever operation ■ Three types of terminal sections are available ■ Contact output is a WET circuit, eliminating the need for external relay terminal blocks ■ Ideal for equipment trial runs, debugging, and maintenance *For more details, please refer to the PDF technical documentation or feel free to contact us.

• relay
• relay

**Features** - Relay terminal with fuse that protects the entire system, including external loads - Displays a signal simultaneously when the fuse blows - Contact output is a WET circuit, eliminating the need for external relay terminal blocks - Can be mounted on a 35mm wide DIN rail - Three types of terminal blocks are available - Fuse selection can be made according to purpose - Available I/O points: 16 points and 32 points - ISO9001 and ISO14001 certified *For more details, please refer to the PDF technical documentation or feel free to contact us.*

• relay
• relay

【Features】 ■ Supports a wide range of voltage specifications ■ Available I/O points: 8 points and 16 points ■ Output options include "DRY circuit" and "WET circuit" ■ Relays can be selected from four different manufacturers ■ Significant space-saving achieved by using "L type" (only for 16 points) ■ Three types of terminals available: self-up type, screw-up type, and screw-up type two-piece connector terminal *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Terminal Blocks
• Other terminal blocks
• Crimp Terminal

【Features】 ◇ Compatible with CC-Link and CC-Link IE Field. ◇ Connector type that can be retrofitted to various specifications of interface units. You can choose from a rich lineup of our products, including direct connection type, relay-equipped type, and e-CON type. ◇ I/O points are available in 16 points and 32 points. (IE Field only has 32 points) ◇ Board coating is also possible. * For more details, please refer to the PDF technical documentation or feel free to contact us.

• connector
• Other Connectors

【Features】 - Space-saving and reduction of man-hours achieved through unitization - Alarm contacts can be accessed during fuse blowout - Adopts "screw-up type" to prevent terminal part detachment - Can be directly mounted or installed on a 35mm wide DIN rail - Standard type protects the system for each circuit - Offers products in "single cut type" and "double cut type" - Switch type allows for circuit inspection at each point - PSE (Electrical Appliance and Material Safety Law) compliant products available - Ideal for branching and distribution of instrument power and control power *For more details, please refer to the PDF technical documentation or feel free to contact us.

• fuse

**Features** - Detects remaining lifespan - Determines failure locations (bearings, shafts, gears) - Starts diagnosis with short-term data measurement and collection - Prevents sudden downtime risks - Minimizes downtime and reduces maintenance costs - Optimizes inspection and parts replacement timing - Total solution including sensors, gateways, and analysis systems - Contributes to IoT implementation *For more details, please refer to the PDF document or feel free to contact us.*

• Other contract services
• Other services
• Contract manufacturing

【Features】 ■ Real-time bidirectional communication is possible ■ Supports LPWA long-range communication ■ Flexible control of pumps placed at a distance ■ Remote status monitoring possible using only I/O without PLC ■ Frequency 920MHz (Sub-GHz) ■ Supports digital I/O (e.g., control signals, alarm contacts, etc.) ■ Supports analog 4-20mA (e.g., water level, water quantity, pressure, flow rate, temperature, CO2, etc.) ■ Ideal for wireless implementation of field information (FA, PA, public) towards IoT realization ■ No communication running costs as it does not use carriers, etc. *For more details, please refer to the PDF technical materials or feel free to contact us.

• Server monitoring and network management tools

【Features】 ■ One port each for Ethernet and RS485 interfaces ■ Communication of Ethernet and RS485 information over the same power supply (power line) ■ HD-PLC: Technology that transmits high-speed data over existing power lines ■ Avoids interference from other frequencies, allowing for separation and extraction of only PLC signals ■ Multi-hop functionality enables communication over distances of up to 1-2 km ■ Easy connection due to no polarity ■ Can be arranged in a topology-free manner ■ Can connect various sensors using RS485 (e.g., thermometer, flow meter, CO2 sensor, etc.) ■ Optional: Noise filter available (including impedance upper function) ■ Complies with IEC61000-4-4 noise testing suitable for use in FA (factory automation) *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Control Panel
• Other process controls
• Connector Terminal Block

This catalog features the multi-transmission device "TOLINE" that we handle. ■ Long-distance transmission is possible with twisted pair cables for FA applications. ■ "TOLINE-V, VJ" enables long-distance transmission suitable for remote monitoring and control. ■ "TOLINE-M, MJ, AIII" is suitable for trolley, slip ring use, and mobile communication. ■ The high-speed transmission device for cart control, "TOLINE-XM," is included in the lineup. ■ We also introduce the sister model, the SS wireless transmission device "AirCode." Please use this for product selection. *For more details, please refer to the PDF technical materials or feel free to contact us.

• Other network tools

【Features】 ■ Size reduction from the conventional units of the "TOLINE-M Series" ■ Easy synchronization with PLCs and realization of free power supply ■ Sufficient noise resistance, stability, and robustness in mobile communications ■ All wiring uses detachable connectors, making unit replacement easy ■ By using the Ethernet I/F M-ENIF, it connects with Mitsubishi PLC Q Series via MC protocol and with Omron PLC CJ1 and CJ2 Series via FINS communication, achieving space-saving and cost reduction in the control panel ■ Power supply for each unit is standardized to DC24V input, allowing operation from the DC24V power supply within the control panel ■ Power and signal lines can be connected using DIN rail bus connectors, reducing wiring labor *For more details, please refer to the PDF technical documentation or feel free to contact us.

• Other FA equipment
• others

The "TOLINE-XM" is a system primarily designed to send and receive signals between multiple mobile carts and ground control panels via a trolley. The system is composed of a master communication unit, slave communication units, and I/O units (input units and output units). It adopts detachable terminal blocks and I/O connectors. Communication with the mobile carts can be performed through the internal input and output operations of the PLC. 【Features】 ■ Transmission via trolley lines and slipping ■ Communication possible between up to 32 mobile carts on the trolley line and the ground control panel ■ Maximum of 224 points for sending and receiving per unit, enabling large-capacity I/O communication ■ High-speed, highly reliable communication that is 10 times faster compared to our conventional products ■ Compact and lightweight, compatible with DIN rail mounting *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements