東朋テクノロジー Product Lineup

【Features】 ■ A lineup of types that allow for circuit opening and switching operations. ■ Types that accommodate small currents such as instrumentation signals and analog signals, as well as rated voltages up to 1000V. ■ A c-contact type is also available, which is convenient for switching operations during equipment replacement. ■ No need to worry about misoperation when using a stopper (optional). ■ Simultaneous opening and closing of up to two poles is possible with the use of a connecting rod (optional). ■ The terminal section adopts a screw-up type to prevent screw drop-out and shorten wiring work. ■ Compliant with overseas UL standards and more. *For more details, please refer to the PDF technical materials or feel free to contact us.

【Features】 ■ Significantly reduces cable connection labor! ■ All poles can be easily detached with one touch without removing the pre-wired cables. ■ Finger-protect type focused on safety (IP20 safety standard). ■ Certified to UL, CSA, and EN standards, ensuring safe use even in overseas fields. ■ A safety cover that protects the contact area (connector part) can be attached when the terminal block is separated. ■ Screws do not fall out, allowing for smooth wiring. ■ A lineup of products compatible with microcurrent (UCK15S1, UCK15S1/4, UKCP15S1). *For more details, please refer to the PDF technical documentation or feel free to contact us.

We are featuring PI spring terminal blocks and distribution blocks. The PI (push-in) spring terminal blocks allow for easy connections with ferrules using a push-in method. For stranded wires, inserting a flathead screwdriver into the terminal block body opens the internal spring, allowing for direct insertion. The distribution blocks are convenient units for branching and consolidating wiring. They accommodate various applications in terms of branching number, capacity, and usage. Our products are developed in collaboration with TE Connectivity (headquartered in Schaffhausen, Switzerland) through its Japanese subsidiary, Tyco Electronics Japan LLC. We are receiving supplies of TE's ENTRELEC terminal blocks and will begin assembly and sales of DIN rail-mounted PI spring terminal blocks starting in December 2023.

【Features】 ■ Direct mounting and 35mm wide DIN rail mounting are possible ■ Equipped with an earth screw ■ The terminal section can be selected from two types: "self-up type" or "screw-up type" ■ Can be connected to servo amplifiers from various manufacturers * For more details, please refer to the PDF technical documentation or feel free to contact us.

【Features】 ■ RoHS compliant ■ High load switching possible due to fast cutoff ■ Equipped with a locking mechanism to prevent malfunction ■ Finger protect (IP20 safety standard) with screw-up type to protect the charging part ■ Low-profile type with a height of 45mm * For more details, please refer to the PDF technical documentation or feel free to contact us.

【Features】 ■ RoHS compliant ■ Improved connection reliability with gold contacts, suitable for low loads! ■ Available in 2-position and 3-position options ■ Finger protect (IP20 safety standard) with screw-up type to protect the charging section *For more details, please refer to the PDF technical documentation or feel free to contact us.

This document is a guide for the introduction of special terminal blocks. It features products such as the "Connector Terminal Block UCK Series," which significantly reduces wiring and maintenance labor costs, as well as the "Disconnection Terminal Block UK Series" and "Branch Terminal Block UCTB Series," along with product images and features. ◆ Includes numerous listings for overseas UL standards! ◆ ISO9001 and 14001 certified Please use this for selecting products. 【Featured Products (Excerpt)】 ■ Connector Terminal Block TKC Series ■ Connector Block Terminal Block UCK Series ■ Disconnection Terminal Block UK Series ■ Circuit Protection Terminal Block UK-SD and UK-F15 Series ■ Branch Terminal Block UCTB Series *For more details, please refer to the PDF technical documentation or feel free to contact us.

This document is a guide for the introduction of relay terminals. It features the "PXGR series" equipped with G7T relays, which supports a wide range of voltage specifications, along with product images and characteristics of the "PXMY series" and "PX7FR series." By consolidating functions that were previously distributed within control panels into a single unit, it achieves reduced wiring labor and space-saving. (ISO9001 and ISO14001 certified) Please make use of this for product selection. 【Featured Products (Excerpt)】 ■ PXGR series (equipped with G7T relay) ■ PXGRS series (with switch) ■ PXGRF series (with fuse) ■ PXGRM series (with fuse/switch) ■ PXMY series (equipped with power relay) *For more details, please refer to the PDF technical documentation or feel free to contact us.

<Features> - It is a relay terminal that is among the smallest in the world, supporting 32 points. - It is approximately 55% smaller compared to the PXGR32 series. - Equipped with push-in terminal blocks compatible with wires up to 1.5mm². - Includes the Fuji Electric PR105-DE relay. - By replacing the relay, it is possible to mount SSRs or b-contact relays.

<Features> - Can accept DC24V, DC48V, and DC100 inputs with photo-coupler isolation. - Faster and more durable compared to mechanical relays. - Available in 16-point and 32-point types. - Terminal section can be selected as self-up or screw-up type. - Cables for connecting to various PLCs are also available.

<Features> - Adopts a push-in terminal block compatible with wire connections up to 1.25mm² - A terminal block that can convert RJ45/D-Sub 9-pin connectors - Usable for serial communication such as RS-485 - Equipped with two rows of terminal blocks to support jumper wiring

1. Reduce wiring work during remote I/O updates. 2. Reuse existing network cables to reduce construction costs.

1. Providing our products at a competitive price. 2. Adoption of Nitto Denko standard BOX (PA16-43) with IP54 compatibility. 3. Simplification of design work within the customer’s organization by providing DXF files.

【Features】 ■ Compatible with our relay connector terminal blocks (direct connection type, relay-equipped type, e-CON type, etc.) ■ Available in 16-point and 32-point configurations ■ Board coating is also possible!

We introduce products and applications that are useful for physically switching electrical lines, such as changing old and new equipment or switching manufacturing lines.

Round crimp terminals can be inserted and connected, allowing wiring and unwiring operations to be performed with just lever operation. Since screws are not used, torque management and re-tightening work required during control panel production are unnecessary. Furthermore, existing tools for round crimp terminals can be utilized as they are. ◇ No screws are used for connections, eliminating the need for torque management and connection tools. With the lever lifted, insert the round crimp terminal into the insertion port for wiring. Since screws are not used, torque management is unnecessary. Connection can be made with lever operation, enabling wiring and unwiring without tools. ◇ Two wires can be connected to one terminal. Can be used in the same applications as screw terminal blocks. No worries about bridging wires. ◇ No protective cover is needed. Zero loss due to cover detachment during transport or work. ◇ Firmly holds round crimp terminals. The structure employs a fixed rod inserted into the round hole of the crimp terminal, ensuring that wires do not come loose. ◇ Adopts a twin terminal method. The crimp terminal is held by two upper and lower terminals, ensuring stable contact.

A new type of "ZIGZAG terminal block" that allows connections with 2.5㎟ insulated sleeve ferrules on a 4.0mm pitch terminal block is scheduled for release soon. 【Features of the terminal section】 - The structure locks when the wire is inserted all the way to the back of the entry, ensuring a reliable connection. - A button pops up with a click to indicate that wiring is complete. - For ferrule terminals with insulated sleeves, wires up to 2.5sq can be connected. - The button has a wide operating surface, allowing disconnection with either a plus or minus screwdriver (Φ3 or smaller). - The printing area allows for labels or laser printing. - The check terminal is compatible with a Φ1.2 test pin.