アイネックス List of Products and Services

The "HM-25" is a product that comes with a heatsink and thermal conductive double-sided tape for M.2 SSDs. The thickness of the heatsink is 1mm. It is suitable for improving the temperature of M.2 SSDs and addressing speed reduction due to thermal throttling. Additionally, the copper plating on the surface is expected to enhance thermal conductivity. Please feel free to contact us if you have any inquiries. 【Features】 ■ Suitable for improving the temperature of M.2 SSDs and addressing speed reduction due to thermal throttling ■ Set of heatsink and thermal conductive double-sided tape for M.2 SSDs ■ Thickness of the heatsink is 1mm ■ Particularly suitable for compact PCs and NUCs where installation space is very limited ■ The copper plating on the surface is expected to improve thermal conductivity *For more details, please download the PDF or feel free to contact us.

• Server Cooler

The "HM-24" is a set product that includes a heat sink, thermal silicone pad, and silicone rubber ring for M.2 SSDs. No screws are needed for attaching the heat sink, so there’s no worry about losing screws. Additionally, by using a silicone pad instead of double-sided tape, it reduces the risk of damaging the SSD label. 【Features】 ■ Suitable for improving the temperature of M.2 SSDs and preventing speed reduction due to thermal throttling ■ Can also be used with PlayStation 5 (verified in-house) ■ No screws needed for attaching the heat sink ■ Reduces the risk of damaging the SSD label by using a silicone pad instead of double-sided tape ■ Easy to install by simply stacking the heat sink, silicone pad, and SSD, and securing them with the silicone rubber ring *For more details, please download the PDF or feel free to contact us.

• Server Cooler

The "HM-23" is a heat sink suitable for M.2 SSDs/electronic devices, designed for heat management in set-top boxes like the Fire TV Stick and routers. It addresses speed reduction caused by thermal throttling of M.2 SSDs and is sized appropriately for card type 2280. If the surface of the electronic device is smooth, it can be attached using the included thermal conductive double-sided tape. 【Features】 - High fins for efficient heat dissipation - Usable not only for M.2 SSDs but also attached to the cases of electronic devices - Suitable for heat management in set-top boxes like the Fire TV Stick and routers - Can be attached to smooth-surfaced electronic devices with the included thermal conductive double-sided tape - Addresses speed reduction due to thermal throttling of M.2 SSDs - Sized appropriately for card type 2280 *For more details, please download the PDF or feel free to contact us.

• Server Cooler

The "HM-21-SET" is a product that includes a heat sink for M.2 SSDs, thermal silicone pads, and a precision screwdriver set. It is suitable for improving the temperature of M.2 SSDs and preventing speed reduction due to thermal throttling. By using silicone pads instead of double-sided tape, it reduces the risk of damaging the SSD label. Additionally, the screwdriver is of a magnetic type, making it less likely for screws to fall and easier to work with. 【Features】 - Suitable for improving the temperature of M.2 SSDs and preventing speed reduction due to thermal throttling - Complete set necessary for mounting M.2 SSDs and heat sinks - Comes with ultra-low hardness thermal silicone pads that achieve high thermal conductivity and electrical insulation - Fixes the M.2 SSD and heat sink with the included silicone rubber ring - Reduces the risk of damaging the SSD label by using silicone pads instead of double-sided tape - The magnetic type screwdriver makes it less likely for screws to fall and easier to work with *For more details, please download the PDF or feel free to contact us.

• Server Cooler
• driver

We would like to introduce our M.2 SSD heatsink 'HM-21'. It is used by attaching it to the chip of the M.2 SSD. Additionally, it can be used on rectangular heat-generating components other than M.2 expansion cards. The size is W22×D66.5×H5.1mm, made of aluminum, and the color is silver. 【Features】 ■ Used by attaching it to the chip of the M.2 SSD ■ Suitable for preventing thermal runaway ■ Can be used on rectangular heat-generating components other than M.2 expansion cards *For more details, please download the PDF or feel free to contact us.

• Server Cooler

The "CB-7010M2" is an M.2 heatsink with a fan. It comes with an ultra-low hardness thermal silicone pad that achieves high thermal conductivity and electrical insulation. It cools effectively even in areas with poor airflow. Additionally, by using a silicone pad instead of double-sided tape, it reduces the risk of damaging the SSD label. 【Features】 ■ Suitable for improving the temperature of M.2 SSDs and preventing speed reduction due to thermal throttling ■ M.2 heatsink with a fan that cools effectively even in areas with poor airflow ■ Comes with an ultra-low hardness thermal silicone pad that achieves high thermal conductivity and electrical insulation ■ Fixes the M.2 SSD to the heatsink with the included silicone rubber ring ■ Reduces the risk of damaging the SSD label by using a silicone pad instead of double-sided tape *For more details, please download the PDF or feel free to contact us.

• Server Cooler

The "HDM-45B" is a case that converts M.2 SATA SSDs into 2.5-inch SATA SSDs. It has the same size, screw hole positions, and SATA connector positions as a 7mm thick 2.5-inch HDD, allowing for installation in laptops and removable racks. No drivers are required, and it operates with the standard Windows drivers. Please feel free to contact us if you have any inquiries. 【Features】 ■ Case that converts M.2 SATA SSDs into 2.5-inch SATA SSDs ■ Same size, screw hole positions, and SATA connector positions as a 7mm thick 2.5-inch HDD, allowing for installation in laptops and removable racks ■ No drivers required, operates with standard Windows drivers *For more details, please download the PDF or feel free to contact us.

• SSD

We would like to introduce our M.2 SSD mounting millimeter screw 'PB-044BK'. It is suitable for securing M.2 SSDs to circuit boards and similar surfaces. The ultra-low head type is ideal for areas where head thickness may interfere, providing a neat appearance. The size is M2×2mm, with a screw head diameter of 5mm and a thickness of 1mm. The material is iron with trivalent chromium plating, and the color is black. 【Features】 ■ A screw suitable for securing M.2 SSDs to circuit boards ■ Screws into a shoulder-type standoff (spacer) on the circuit board side ■ M2 screw / 2mm length ■ Ultra-low head type is ideal for areas where head thickness may interfere, providing a neat appearance ■ ASRock and ASUS often use M2, while GIGABYTE and MSI often use M3 (according to our research) *For more details, please download the PDF or feel free to contact us.

• Screw

The "PB-044" is a millimeter screw suitable for securing M.2 SSDs to circuit boards and other surfaces. It is fastened to a shoulder-type standoff (spacer) on the circuit board side. The ultra-low head type is ideal for areas where head thickness may interfere, and it also provides a neat appearance. Please feel free to contact us if you need assistance. 【Features】 ■ Screws suitable for securing M.2 SSDs to circuit boards and other surfaces ■ Fastened to a shoulder-type standoff (spacer) on the circuit board side ■ M2 screw / 2mm length ■ Ultra-low head type is ideal for areas where head thickness may interfere, providing a neat appearance *For more details, please download the PDF or feel free to contact us.

• Screw

The "PB-033A" is an ultra-low head mill screw designed to secure 2.5-inch HDDs/SSDs, optical drives, FDDs, and more. By matching it with an internally painted black case, it creates a calm atmosphere. It can also be used as a general-purpose mill screw. Please feel free to contact us if you have any requests. 【Features】 - Screws for securing 2.5-inch HDDs/SSDs, optical drives, FDDs, etc. - Suitable where the thickness of the head interferes, providing a clean appearance - Can also be used as a general-purpose mill screw - Creates a calm atmosphere by matching with an internally painted black case *For more details, please download the PDF or feel free to contact us.

• Screw

The "PB-027RA" is a metric screw with rubber washers designed to secure 2.5-inch HDDs/SSDs, optical drives, FDDs, and more. It prevents rattling sounds and vibrations. The washers are used between the device and the mounting surface. Additionally, it can also be used as a general-purpose metric screw. 【Features】 ■ Screws for securing 2.5-inch HDDs/SSDs, optical drives, FDDs, etc. ■ Equipped with rubber washers for vibration prevention ■ Prevents rattling sounds and vibrations ■ Washers are used between the device and the mounting surface ■ Can also be used as a general-purpose metric screw *For more details, please download the PDF or feel free to contact us.

• Screw

We would like to introduce our washer head mill screw 'PB-027B'. It comes in a pack of 10, with a size of M3×5mm, in silver color, and complies with RoHS directives (10 substances). The washer is integrated with the screw head, making it very convenient as a general-purpose mill screw. Please feel free to contact us if you would like to place an order. 【Features】 ■ Screws for securing 2.5-inch HDD/SSD, optical drives, FDDs, etc. ■ The washer is integrated with the screw head, making it very convenient as a general-purpose mill screw. *For more details, please download the PDF or feel free to contact us.

• Screw

The "PB-024RA" is an inch screw with a rubber washer designed to secure a 3.5-inch HDD in a case. It prevents rattling sounds and vibrations. The washer is used between the HDD and the mounting surface. It can also be used as a general-purpose inch screw. Please feel free to contact us if you have any requests. 【Features】 ■ Screws for securing 3.5-inch HDDs in cases ■ Inch screws for HDDs equipped with rubber washers for vibration prevention ■ Prevents rattling sounds and vibrations ■ The washer is used between the HDD and the mounting surface ■ Can also be used as a general-purpose inch screw *For more details, please download the PDF or feel free to contact us.

• Screw

The "PB-024B" is an inch screw used to secure a 3.5-inch HDD to a case. It comes in a pack of 10, with a size of #6-32×4mm, in silver color, and complies with RoHS directives (10 substances). Additionally, it can also be used as a general-purpose inch screw. Please feel free to contact us if you need any assistance. 【Features】 ■ Screws for securing a 3.5-inch HDD to a case ■ Can also be used as a general-purpose inch screw *For more details, please download the PDF or feel free to contact us.

• Screw

The "CVT-08B" is an easy-to-handle, all-in-one cable 2.5-inch SATA-USB 3.2 Gen 1 conversion adapter that allows for simple connections. It supports UASP (USB Attached SCSI Protocol), enhancing data transfer efficiency and maximizing USB speed. Additionally, it draws power from the USB cable, eliminating the need for an AC adapter. Please feel free to contact us if you have any inquiries. 【Features】 ■ Converts built-in 2.5-inch SATA SSD/HDD to a high-speed external USB 3.2 Gen 1 connection ■ UASP support enhances data transfer efficiency and maximizes USB speed ■ Can also be used as an expansion storage case for PlayStation 5 (verified by our company) ■ Power is supplied via the USB cable, so no AC adapter is needed ■ Easy to handle and connect due to the all-in-one cable design ■ Ideal for data backup ■ No driver required; operates with standard Windows drivers *For more details, please download the PDF or feel free to contact us.

• Converters and Transducers
• cable
• SSD

The "HSP-01A" is a spacer that converts a 7mm thick 2.5-inch SSD/HDD to 9.5mm thick. It is used when replacing a 9.5mm drive with a 7mm drive in laptops and can also be used in trayless removable racks and HDD cases. The material is plastic, and the dimensions are W67.5×D97.5×H2.7mm. Please feel free to contact us if you need assistance. 【Features】 ■ Spacer that converts a 7mm thick 2.5-inch SSD/HDD to 9.5mm thick ■ Used when replacing a 9.5mm drive with a 7mm drive in laptops ■ Can also be used in trayless removable racks and HDD cases ■ Fixed to the top of the device with adhesive tape already attached to the bottom *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-13A" is a 2.5-inch SSD/HDD conversion mount that allows you to install two 2.5-inch SSDs/HDDs with a thickness of 9.5mm or less in a single 3.5-inch bay. Due to its integrated mount design, it can be securely fixed more easily compared to products that require combining multiple parts. By matching it with an internally painted black case, it creates a calm atmosphere. 【Features】 ■ Allows installation of two 2.5-inch SSDs/HDDs with a thickness of 9.5mm or less in a single 3.5-inch bay ■ Integrated mount design allows for easy and secure fixing compared to products that require multiple parts ■ Supports bottom hole fixing ■ Creates a calm atmosphere by matching with an internally painted black case *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-46B" is a 2.5-inch SSD/HDD conversion mount that can convert a single 2.5-inch SATA SSD/HDD into a 3.5-inch SATA device with compatible connector positions. Due to its identical size, screw hole positions, and SATA connector positions to a 3.5-inch HDD, it can also be mounted in removable racks. Additionally, it allows for the replacement of a 3.5-inch HDD with a 2.5-inch SSD, enabling the acceleration of PCs or NAS with 3.5-inch swap bays. 【Features】 ■ The screw holes for securing the 3.5-inch SSD/HDD can be fixed at three points: both ends and the center. ■ Supports the fixation method used in large-capacity 3.5-inch HDDs, which only secures at both ends. ■ Features slits at the front and back to enhance ventilation. ■ The top cover is sliding and can be easily closed. ■ As an integrated mount, it can be securely fixed more easily compared to products that combine multiple parts. ■ The connector on the 3.5-inch device side is compatible with latch connectors. *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-34A" is a 2.5-inch SSD/HDD conversion mount that can be easily and securely fixed compared to products that combine multiple parts, thanks to its integrated design. Both the side and bottom have screw holes for bay fixation that share the same hole spacing/inch hole as a 3.5-inch HDD, achieving high compatibility with dedicated fixtures such as rails and cases that use bottom fixation. Additionally, it creates a calm atmosphere by matching the internal black-painted case. 【Features】 ■ Can install one 2.5-inch SSD/HDD in a single 3.5-inch bay ■ Easy and secure fixation compared to products that combine multiple parts due to its integrated design ■ Screw holes for bay fixation have the same hole spacing/inch hole as a 3.5-inch HDD (on both sides and bottom) ■ Achieves high compatibility with dedicated fixtures such as rails and cases that use bottom fixation ■ Creates a calm atmosphere by matching the internal black-painted case *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-29B" is a conversion mount that allows you to install one 2.5-inch SSD/HDD in a single 3.5-inch bay. As it is an integrated mount, it can be securely fixed more easily compared to products that combine multiple parts. The screw holes for bay fixation have the same hole spacing/inch as a 3.5-inch HDD. (Both side and bottom) This ensures high compatibility with cases that use dedicated fixtures like rails or bottom fixation. 【Specifications】 ■ Size: W101.5×D120×H15mm ■ Material: Metal ■ Color: Black ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-27B" is a conversion mount that allows you to install one 2.5-inch SSD/HDD in a single 3.5-inch bay. Being an integrated mount, it can be securely fixed more easily compared to products that require combining multiple parts. The screw holes for bay fixation have the same spacing as the front two or back two holes of a 3.5-inch HDD. By matching the internal black-painted case, it creates a calm atmosphere. 【Specifications】 ■ For 3.5-inch bays ■ Size: W101.5×D100×H11.55mm ■ Material: Aluminum ■ Color: Black ■ Accessories: 8 fixing screws ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-09B" is a bracket for securing one 3.5-inch HDD in a 5-inch bay. It comes with four inch screws for device fixation, and the material is metal. It is a model change from "HDM-09A" with no differences. It does not support the fixation method used for large-capacity 3.5-inch HDDs that only secures at both ends. Please prepare the bay fixation screws separately. This product uses inch screws. 【Specifications】 ■ Includes four inch screws for device fixation ■ Material: Metal ■ Complies with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-32A" is a conversion mount that allows you to install a 2.5-inch or 3.5-inch SSD/HDD in a single 5-inch bay. It can accommodate two 2.5-inch SSDs/HDDs. The side screw holes for bay fixation have the same hole spacing/millimeter holes as 5-inch devices. Devices are fixed with bottom holes, and the bay is fixed with side holes. It creates a calm atmosphere by matching the internal black-painted case. 【Specifications】 ■ For 5.25-inch bays ■ Size: W146×H28.5×D147mm ■ Material: Metal ■ Color: Black ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-44A" is a mount for securing 3.5-inch or 2.5-inch SSDs/HDDs in a 5-inch bay, designed for 3.5-inch open bay devices. It can accommodate one 3.5-inch or 2.5-inch device in a single 5-inch bay. A 3.5-inch device can be an open bay device or an SSD/HDD. It supports the fixation method used for large-capacity 3.5-inch HDDs, which secures only at both ends. The screw holes for securing 3.5-inch SSDs/HDDs can be fixed at three points: both ends and the center. 【Specifications】 ■ For 5.25-inch bays ■ Size: W147×D164.5×H42mm ■ Material: ABS ■ Color: Black ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-08C-BK" is a mount for converting a 5-inch bay into a 3.5-inch open bay. It is a recessed fixed type. It is used by aligning a 3.5-inch device with the back of the front bezel, allowing the 3.5-inch device to sit deeper due to the thickness of the bezel. It can accommodate FDDs, MO drives, card readers, and more. A recess is provided at the lower right of the opening for easy access to the eject button. 【Specifications】 ■ Metal chassis ■ Plastic bezel ■ Color: Black ■ Accessories: 8 mounting screws ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The "HDM-07C" is a mount for converting a 5-inch bay into a 3.5-inch open bay. It features a flush mounting type, allowing the front of the 3.5-inch device and the front bezel to align, creating a unified and tidy appearance. It can accommodate I/O front panels, card readers, FDDs, and more. 【Specifications】 ■ For 5.25-inch bays ■ Integrated chassis/front bezel ■ Size: W148.3×D139×H42.65mm ■ Material: Plastic ■ Color: Black ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• SSD

The 『EX-008』 is a cable that branches the 2-pin connectors for the power/reset switch and LED on the motherboard. By passing additional switch/LED cables through gaps or holes in the case, you can control the power of the computer and check the LED from your hand. It can be combined with our power switches/LEDs (such as PA-062B, PA-045B, DTE-03, KM-01A, KM-07A, etc.). It is compatible with 2.54mm pitch connectors. 【Specifications】 ■ Motherboard side: 1x2 pin female x1 ■ Cable side: 1x2 pin male x2 ■ Connector pitch: 2.54mm ■ Cable length: 10cm (excluding connectors) ■ 2 pieces included ■ Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• cable

The 『EX-007』 is a cable that extends a 2-pin connector on the motherboard. It allows for easy connection of front panel I/O (such as front panel switches/LEDs/audio/USB 2.0/IEEE 1394) with loose pin connectors to the motherboard. With a length of 30 cm, it is suitable for extensions and internal wiring. The ribbon cable keeps the wires organized and makes handling easy. The connectors and cables are black, making them unobtrusive, which is ideal for illuminated PCs or cases with black interiors. 【Specifications】 ■ Motherboard side: 1x2 pin female ■ Cable side: 1x2 pin male ■ Connector: 2.54mm pitch ■ Cable length: 30 cm ■ 2 pieces included ■ Compliant with RoHS directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• cable

The RS-008 allows you to extend a Type-C connector from the front USB Type-C header (Key-A 20-pin, also known as Type-E) of the motherboard to the rear slot. It supports USB 20Gbps. In an environment compatible with USB 3.2 Gen 2x2, it achieves high-speed data transfer of 20Gbps (theoretical value). You can make effective use of unused onboard USB ports. The pin layout conforms to standard specifications. 【Specifications (partial)】 ■ For rear slot (full height only) ■ Supported standard: USB 3.2 Gen 2x2 (backward compatibility with USB 3.2 Gen 2/USB 3.2 Gen 1/3.0/2.0) ■ Maximum data transfer speed: 20Gbps (theoretical value) ■ USB PD (Power Delivery): Not supported ■ DisplayPort Alt mode: Supported *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "HUB-09" is a hub that splits a USB 3.0 (2x10 pin) header on the motherboard into two. It is convenient for building environments with many internal USB 3.0 devices on motherboards with limited USB 3.0 headers. It is recommended when multiple USB 3.0 headers are needed in large cases or front bay devices. It comes with a double-sided tape pad for attaching to the back of the board. 【Specifications (partial)】 ■ For installation inside PC cases, board type ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ USB self-powered only ■ USB ports: 4 (2x10 pin header for USB 3.0 x2) *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "HUB-07" is a hub that distributes a USB 2x5 pin header on the motherboard into four outputs. It is convenient for building environments with many internal USB 2.0 devices on motherboards that have few USB 2.0 headers. It is recommended for situations where multiple USB 2.0 headers are needed, controlled by LED. The back of the board has pads with double-sided tape attached, allowing it to be installed in any location inside the PC case. The LED on the board lights up while the hub function is in operation. 【Specifications (partial)】 ■ Board type, for installation inside PC cases ■ Supported standards: USB 2.0/1.1 ■ High-Speed (480Mbps) compatible (theoretical value) ■ USB bus power only ■ USB ports: 8 (2x5 pin headers for USB 2.0 x4) ■ LED: Red (while hub function is in operation) *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "HUB-06A" is a hub that splits a USB 2x5 pin header on the motherboard into two. It is convenient for building environments with many internal USB 2.0 devices on motherboards with few USB 2.0 headers. It is recommended when multiple USB 2.0 headers are needed, controlled by LED. The back of the board has pads with double-sided tape attached, allowing it to be installed anywhere inside the PC case. The LED on the board lights up while the hub function is active. 【Specifications (partial)】 ■ Board type, for installation inside PC cases ■ Supported standards: USB 2.0/1.1 ■ High-Speed (480Mbps) compatible (theoretical value) ■ USB bus power only ■ USB ports: 4 (2x5 pin headers for USB 2.0 ×2) *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The 『USB-028』 is a conversion adapter that converts the front USB Type-C header (Key-A 20-pin) of a motherboard into an L-shaped connector. It changes the orientation towards the KEY side (the part with the angled corner) of the motherboard header. The L-shape makes it convenient for wiring in tight spaces. It is suitable for small motherboards or compact cases where there is limited space around the front USB Type-C header. 【Specifications】 ■ Supported Standards: USB3.2 Gen 2/USB3.0/2.0/1.1 ■ SuperSpeed USB 10Gbps compatible (theoretical value) ■ Connector Type ・Motherboard side: Key-A 20-pin male ・Cable side: Key-A 20-pin female L-shaped ■ Size: Approximately W22.5×D15×H10.5mm *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The 『USB-027』 is a conversion adapter that converts the front USB Type-C header (Key-A 20-pin) of a motherboard to an L-shape. It changes the orientation to the opposite side of the KEY (the part with the angled corner) on the motherboard header. The L-shape makes it convenient for wiring in tight spaces. It is suitable for small motherboards or compact cases where there is limited space around the front USB Type-C header. 【Specifications】 ■ Supported Standards: USB3.2 Gen 2/USB3.0/2.0/1.1 ■ SuperSpeed USB 10Gbps compatible (theoretical value) ■ Connector Type ・Motherboard side: Key-A 20-pin male ・Cable side: Key-A 20-pin female L-shape ■ Size: Approximately W22.5×D15×H10.5mm *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The 『USB-026』 is a conversion adapter that changes the front USB Type-C header (Key-A 20-pin) of the motherboard to a USB 3.0 Type-A connector. It allows external USB devices to connect to the front USB Type-C header on the motherboard. It can also change the connection of internal devices from the rear USB to the front USB Type-C header. This adapter can be used to connect USB memory sticks, various dongles, as well as devices powered by USB, such as digital clocks and RGB LED controllers. 【Specifications (partial)】 ■ Supported standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector type ・Motherboard side: Key-A 20-pin male ・Cable side: USB 3.0 Standard-A female ■ Color: Gray *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "USB-024" is a Type-C header conversion adapter that changes the motherboard's USB 3.0 header to a front USB Type-C header (Key-A 20-pin). It is convenient when there is no front USB Type-C header or it is lacking. Additionally, its L-shaped design makes it useful for wiring in tight spaces. It is suitable for small motherboards or cases where there is limited space around the USB 3.0 header. The operation is USB 3.0 (USB 3.2 Gen 1). 【Specifications】 ■ Supported Standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector Type - Motherboard side: 2x10 pin female - Cable side: Key-A 20 pin female L-shaped ■ Size: Approximately W30 × D25 × H11.3mm *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The 『USB-025』 is a Type-C header conversion adapter that changes the motherboard's USB 3.0 header to a front USB Type-C header (Key-A 20-pin). It is convenient when the front USB Type-C header is not equipped or is lacking. The operation will be USB 3.0 (USB 3.2 Gen 1). The Key-A 20-pin header supports one USB Type-C port or one Standard-A port. 【Specifications】 ■ Supported standards: USB 3.2 Gen 1 / USB 3.0 / 2.0 / 1.1 ■ SuperSpeed USB compatible (5Gbps: theoretical value) ■ Connector shape ・Motherboard side: 2x10 pin female ・Cable side: Key-A 20 pin female ■ Size: Approximately W20×D25×H11.0mm *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "USB-013A" is a USB 3.0 extension cable for cases that extends the USB 3.0 cable for motherboards. It is suitable for full tower and server cases. The connection is easy with the set connector. It supports 2 ports. This is a model change of "USB-013". There is no difference. The pin layout complies with Intel's published specifications. However, pin 10 is NC. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Cable side: 2x10 pin male ・Motherboard side: 2x10 pin female ■ Cable length: 30cm *For more details, please download the PDF or feel free to contact us.

• cable

The "USB-010B" is a USB 3.0 adapter for cases that converts a USB 3.0 cable for motherboards to connect to USB 2.0 header pins. It allows the use of USB 3.0 devices on motherboards that do not have a USB 3.0 header. The operation will be at USB 2.0 speeds. One adapter provides two ports. This is a model number change from "USB-010A." There are no differences. The pin arrangement follows standard guidelines. 【Specifications】 ■ Connector Type - Cable Side: 2x10 Pin Male - Motherboard Side: 2x5 Pin Female ■ Compliant with RoHS Directive (10 substances) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "USB-018A" is an L-shaped extension adapter for USB 3.0 connectors on motherboards. Standard USB 3.0 cables for motherboards are thick and have large connectors, making it difficult to connect in tight spaces. By using this product, you can connect the USB 3.0 header to the cable. It is ideal for small motherboards, compact cases, or when there is limited space around the USB 3.0 header. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Motherboard side: 2x10 pin female ・Cable side: 2x10 pin male L-shaped ■ Size: W26.5×D27.4×H11.5mm *For more details, please download the PDF or feel free to contact us.

• Other Connectors

The 『USB-023』 is a USB cable for cases that changes the connection of external USB devices to the USB header connection on the motherboard. It can be used not only for USB flash drives and various dongles but also for connecting devices that operate on USB power, such as digital clocks and RGB LED controllers. It is also possible to change the internal devices with rear USB connections to the USB header connection on the motherboard. The set connector makes it easy to connect. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Motherboard side: 2x5 pin female ×1 ・Cable side: USB 2.0 Standard-A female ×2 ■ Color: Black ■ Cable length: Approximately 10cm (excluding connectors) *For more details, please download the PDF or feel free to contact us.

• Other cable related products

We would like to introduce our case USB cable 'USB-007D'. This USB cable for motherboards can be changed to connect to USB connectors on rear ports/expansion cards. It is a model change of 'USB-007C'. There are no differences. The pin arrangement follows the general guidelines. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector type ・Cable side: 1x4 pin male ・Rear port/expansion card side: USB 2.0 Standard-A type male ■ Color: Black ■ Cable length: 40cm *For more details, please download the PDF or feel free to contact us.

• Other cable related products

The "USB-006D" is an extension cable for wiring a case with a USB connector to a motherboard. It is suitable for full tower and server cases. The set connector makes connection easy. By matching it with an internally painted black case, it creates a calm atmosphere. This is a model change from "USB-006C." There are no differences. The pin arrangement is a standard one that complies with guidelines. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Cable side: 2x5 pin male ・Motherboard side: 2x5 pin female ■ Color: Black ■ Cable length: 50cm *For more details, please download the PDF or feel free to contact us.

• Other cable related products

We would like to introduce our panel mount USB 3.0 cable, 'USB-022A'. This cable extends the USB 3.0 connector on the back/expansion card, allowing you to install the connector in any location such as the front or rear panel. The nut is embedded in the mold and is secured with the included screws. This is a model change of 'USB-022', and there are no differences. 【Specifications (partial)】 ■ Supported standards: USB 3.0/2.0/1.1 ■ SuperSpeed (5Gbps: theoretical value) compatible ■ Connector shape ・Back/expansion card side: USB 3.0 Standard-A male ・Chassis panel side: USB 3.0 Standard-A female ■ Cable length: 80cm *For more details, please download the PDF or feel free to contact us.

• Other cable related products

We would like to introduce the case USB cable 'USB-002E10' that we handle. This cable extends the USB connector on the rear/expansion card, allowing you to install the connector in any desired location, such as the front or rear panel. The nut is attached to the molded recess and secured with a screw. This is a model change of 'USB-002D10'. There are no differences; only the product name has been changed. 【Specifications (partial)】 ■ Supported standards: USB 2.0/1.1 ■ Connector shape ・Panel side: USB 2.0 Standard-A female ・Rear/expansion card side: USB 2.0 Standard-A male ■ Cable length: 80cm ■ Accessories: 20 screws and 20 nuts for fixing *For more details, please download the PDF or feel free to contact us.

• Other cable related products