八坂テクノス Product Lineup

Guide wire coating: PTFE Sub-Lite-Wall spiral stripe heat shrink provides lubrication to the shaft and is used to visualize the movement of the guide wire. Laparoscopic insulation: FEP heat shrink and PTFE heat shrink protect doctors and patients in electrosurgical procedures by providing insulation.

• others

FEP heat shrink tubing is a highly versatile method for applying a protective coating that closely adheres to a wide variety of components. FEP heat shrink tubing products are supplied in an expanded state but can be firmly molded into complex and irregular shapes through brief heating, resulting in a fully covered, robust cover. It achieves high standards of throughput and can accommodate a wide range of uneven or angled shapes. Shrinking can be performed using various methods, from high-performance heat guns to ovens (though using an oven allows for the most uniform shrinkage). We offer customization to meet your product needs. Coating with Zeus FEP heat shrink tubing protects the covered parts from extreme heat, moisture, corrosion, and impact, extending product life. It is popular in industries such as aerospace, electronics, fiber optics, and automotive. In the medical field, FEP heat shrink tubing is an ideal manufacturing aid for catheter shaft coating reflow processes and can be easily removed afterward.

• Other polymer materials

"LCP Monofilament" can be used as a non-metallic alternative for MRI-compatible catheter braiding. It is ideally suited for catheter blades, enabling the production of catheters without the use of metals such as stainless steel. Additionally, it provides excellent torque response, ease of insertion, and deflection at the distal end of the catheter. 【Features】 ■ MRI compatible ■ Excellent torque transmission and deflection at the distal end ■ Less minimal fraying compared to other aramid fibers ■ Class VI approved ■ Can be wound on Steeger or Wardwell bobbins, DIN 160 spools *For more details, please refer to the PDF document or feel free to contact us.

• others

The "PEEK Insulation Wire" has been specifically developed for use in harsh environments in industries such as oil/gas, automotive, aerospace, and electrical. It has a dielectric strength of over 3,000v/mil and a continuous operating temperature of 260°C (500°F), demonstrating excellent abrasion resistance and the ability to withstand extreme pressures and corrosive liquids found in harsh environments. This product has been proven to enhance motor performance, improve Q factor, capacitance, and partial discharge. 【Features】 ■ Suitable for harsh environments ■ Exhibits excellent abrasion resistance ■ Withstands extreme pressures and corrosive liquids ■ Dielectric strength: over 3,000v/mil ■ Continuous operating temperature: 260°C (500°F) *For more details, please refer to the PDF document or feel free to contact us.

• others

"PEEKshrink" forms a heat-shrink layer on precision components and critical connections. It replaces traditional fluoropolymer protective coatings and features a wide operating temperature range. It is suitable for harsh environments that adversely affect wires and electrical components, such as wear, high pressure, chemicals, water, and dielectric interference, encountered in oil and gas exploration. [Features] - High continuous use temperature (500°F/260°C) - Extends the lifespan of protected items - Guarantees reliable performance - Bonds to metals - Transparent shrink temperature: 572°F to 644°F (300°C to 340°C) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "PEEK Radiopaque Tube" can be visualized using X-ray/fluoroscopy methods. The radiopacity of this product allows for the precise placement of implant devices. Additionally, if a filler is only needed for a portion of the tube rather than the entire length, RO striping can be added along the entire length of the product. 【Features】 ■ Visible with X-ray/fluoroscopy ■ Biocompatible ■ Chemical resistance ■ Wear resistance ■ Electrostatic dissipation *For more details, please refer to the PDF document or feel free to contact us.

• others

The "StreamLiner Series" was developed leveraging 50 years of industry-leading experience in the development and manufacturing of advanced polymer extrusion molding. The "Sub-Lite-Wall Tube" is a family of extruded tube products with an ultra-thin size of less than 0.005" (0.127mm) in thickness. This product line aims to significantly advance catheter design to improve treatment levels and clinical outcomes. [Features] ■ Customizable mechanical properties ■ High lubricity ■ Advanced flexibility ■ Operating temperature range: -328 to 500°F (-200 to 260°C) *For more details, please refer to the PDF document or feel free to contact us.

• others

"Tyre Layer" forms a dissolvable bondable surface that improves adhesion to the coating of the liner and catheter shaft during the reflow process. It enhances the bonding strength between the coating and the liner to address industry needs, reducing the risk of delamination. Additionally, it can reduce manufacturing costs and defects. [Features] - Biocompatible USP Class VI approved - Reduces delamination - Improves bonding strength by up to 2.5 times - Increases production yield - Reduces manufacturing costs/defects *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog introduces the "Polymer Extrusion Products" manufactured by ZEUS Corporation. It features a variety of product lines, including "PTFE Heat Shrink Tubing," "PEEKshrink" for harsh environments, and "Dual-Shrink Tubing." Please make use of this information when selecting products. [Contents] ■ Application Fields ■ Extruded Product Dimension Table ■ Heat Shrinkable Extruded Products ■ Special Products ■ Value-Added Services *For more details, please refer to the PDF document or feel free to contact us.

• others

"FluoroPEELZ" is a tear-resistant heat shrink tube that simplifies catheter manufacturing, saving time and costs. By using this product, the final process becomes quick, easy, and safe. Due to its linear tear resistance, technicians can quickly and uniformly peel it off the shaft after shrinking. With excellent welding capabilities, it is possible to manufacture catheters with a smooth surface free of defects. 【Features】 ■ Operating temperature resistance of 400°F/204°C ■ USP Class VI certified ■ Smooth surface finish for catheters ■ Visual inspection after welding ■ Tear resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

"Aeos ePTFE suture monofilament" has excellent knot strength. It is made by stretching PTFE that has been extruded through a strictly controlled manufacturing process. Through partnerships with suppliers such as RK Manufacturing Corporation, it is also possible to join needles with a maximum diameter ratio of 1:1. 【Features】 ■ High knot strength and microporosity ■ Hydrophobic ■ Class VI approved ■ Custom sizes available ■ Delivery forms can be in rolls or cut to the ordered length *For more details, please refer to the PDF document or feel free to contact us.

• others

"Aeos ePTFE products" are high-performance materials made by rapidly stretching PTFE that has been extruded under controlled manufacturing process conditions. They are composed of solid nodes interconnected by a matrix of fine fibers. They possess various physical properties suitable for use in a wide range of applications, including water repellency, porosity, flexibility, and strength. [Features] ■ Microporous ■ Hydrophobic ■ Low friction coefficient ■ Excellent dielectric strength ■ Biocompatible, Class VI approved, exceptional chemical resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

We offer the low-temperature Dual-Shrink(TM) heat-shrinkable product manufactured by Zeus, which combines an FEP outer layer and an EFEP inner layer. When heated, the FEP outer layer of this product shrinks while the EFEP inner layer flows in, completely covering the target area. At the recommended shrink temperature of 215°C, it forms a high-quality coating that encompasses the excellent heat-shrink properties of both FEP and EFEP. 【Key Features】 ■ Operating Temperature: up to 302°F/150°C ■ Sealed moisture-proof coating ■ Chemical resistance ■ Sterilizable ■ Corrosion protection *For more details, please download the PDF or feel free to contact us.

• Other polymer materials
• tube