ニワカソフト Product Lineup

Thank you for your attention. This is a case study of mud flaps for automobiles made from carbon (CFRP). [Challenges Before Implementation] ■ There were no services available for small lot orders. [Reasons for Choosing Carbon Lab.jp] ■ Can be produced from small lots at low cost. ■ A wide variety of board thicknesses available. [Results and Effects After Implementation] ■ The quality is good, and I would like to reorder. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

【Challenges Before Introduction】 ■ Lead tape was applied to suppress the unique ringing of glass, but there were doubts about its effectiveness. ■ The reproduced sound also had a subtly unstable sound image. 【Reasons for Choosing Carbon Lab.jp】 ■ Costs were kept lower compared to other companies. ■ The ordering process was simple, and rounded finishing could be easily requested. 【Results and Effects After Introduction】 ■ The three-dimensional sound image, which is the essence of record playback, was clearly manifested. ■ The processing quality of the carbon plates themselves is also high. Other cases are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

At Ozawa Precision Industry Co., Ltd., we provide one-stop solutions from machining lead parts to plating treatment. We reduce the hassle of arranging processes and the quality risks associated with them, alleviating the burden of delivery management. Additionally, we also offer sandblasting treatment aimed at improving plating adhesion. *Note: Only hard lead is supported. In the case of pure lead, we may not be able to accommodate depending on the shape. ■ About Zinc Plating Zinc plating is a surface treatment that utilizes electrical power to form a uniform zinc layer. In addition to improving rust resistance, it is widely adopted to prevent direct contact with lead. Chromate treatment can accommodate black trivalent chromate.

• Machining Center
• Other machine tools
• Other metal materials

At Ozawa Precision Industry Co., Ltd., we offer a service that allows you to easily request a quote by simply sending drawing data from our dedicated site for lead processing. By utilizing our regular inventory, we can typically deliver within 3 to 4 weeks after placing an order. If you are in a hurry, you can also choose a short delivery option, allowing for delivery in as little as 1 week. The process from receiving your quote request to delivery is as follows: (1) Quote Request Please fill out the request form on our dedicated site with your dimensioned DXF data and customer information, and send it. ▼ (2) Submission of Quote After reviewing the details, our representative will send you a quote via email within 2 to 4 business days. ▼ (3) Confirmation of Order Once you have reviewed the quote and confirmed your order, it will be officially placed. ▼ (4) Production and Inspection After the order is confirmed, production will begin at our factory. Once completed, we will conduct dimensional and visual inspections to ensure quality. ▼ (5) Packaging and Shipping The products will be protected and secured with wrap or surface protection sheets, packed in cardboard, and shipped.

• Machining Center
• Other machine tools
• Other metal materials

■Machining Center (MC) Equipment: DMG Mori Seiki NVX5100 Processing Type: Cutting Thickness: Hard lead t1 ～ 9mm (0.5mm increments) Pure lead t1 ～ 5mm (1.0mm increments) Supported Sizes: Material Size: 10×10 ～ 1000×500mm Processing Size: 10×10 ～ 900×400mm Dimensional Tolerance: ±0.2 ～ 1.0mm ■Laser Processing Machine Equipment: Yamazaki Mazak Super Turbo X44 Processing Type: Laser Processing Thickness: Hard lead t1 ～ 9mm (0.5mm increments) Pure lead t1 ～ 5mm (1.0mm increments) Supported Sizes: Material Size: 10×10 ～ 1000×500mm Processing Size: 10×10 ～ 900×400mm Dimensional Tolerance: ±0.2 ～ 1.0mm ■Types of Lead Supported Hard Lead (4 types of hard lead plates): High-strength alloy lead plates with 4% antimony added. Suitable for use in environments from room temperature to 120°C, making it ideal for industrial applications requiring durability. Pure Lead (pure lead plates): High-purity lead plates with a purity of over 99%. Excellent flexibility and workability, capable of bending and accommodating complex shapes.

• Machining Center
• Other machine tools
• Other metal materials

Even if it's your first time with lead processing, you can rest assured. We cater to a wide range of needs, from small lots to short delivery times. Six reasons why Ozawa Precision Industry is chosen for lead processing: ■ Diverse processing methods and reliable quality We primarily focus on machining for cutting processes and also accommodate laser processing. We propose the optimal processing method according to product shape and application, responding with a flexible processing system. ■ Support from one piece to mass production We accept a wide range of requests, from prototype pieces to mass production projects. Feel free to consult us even if the quantity or specifications are not yet determined. ■ Consultation available for multiple materials In addition to lead processing, we also handle metal processing such as aluminum and iron, as well as carbon processing through our overseas partner factories, all in a one-stop service. ■ Delivery in as little as one week By utilizing our regular inventory, we can typically deliver within 3 to 4 weeks after ordering. For urgent requests, we also offer short delivery options. ■ High precision even in lead processing Lead is a material that is difficult to manage for precision, but by optimizing processing conditions, we can manufacture with dimensional tolerances of approximately ±0.2 to 1.0 mm. ■ Leave the plating processing to us We can handle everything up to zinc plating treatment. By consolidating processes into a single request, we can manage delivery times and quality control smoothly.

• Machining Center
• Other machine tools
• Other metal materials

【Challenges Before Introduction】 ■ Wanted to reduce the weight of the robot while maintaining strength ■ Did not have the technology for high-precision processing 【Reasons for Choosing Carbon Lab.jp】 ■ Quick estimates and immediate price information ■ High precision and recommended by others 【Results and Effects After Introduction】 ■ Successfully reduced weight while maintaining strength ■ No burrs, and a pleasant tactile feel We also introduce many other cases in our PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

【Challenges Before Implementation】 ■ While strength was necessary, there was a need to keep the overall weight of the robot low. ■ The existing suppliers did not handle carbon materials. 【Reasons for Choosing Carbon Lab.jp】 ■ Simple estimates based on 3D models only. ■ Speed of response. ■ Low cost. 【Results and Effects After Implementation】 ■ Good quality leading to weight reduction. We also introduce many other cases in our PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is a case study of an antenna pole made of carbon (CFRP) for a Mars exploration rover. [Challenges Before Implementation] - The rover needed to have the strength to traverse uneven terrain. - There were weight restrictions, necessitating weight reduction. [Reasons for Choosing Carbon Lab.jp] - The speed of estimates and processing accuracy received good evaluations from acquaintances. [Results and Effects After Implementation] - Weight was reduced, maneuverability improved, and transportation burdens were alleviated. - It was able to be fixed without interfering with the parts that had been prepared in advance. We also introduce many other case studies on our PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of a customized top plate part made of carbon (CFRP) for a controller used in fighting games. 【Challenges Before Implementation】 ■ No processing equipment available at home 【Reasons for Choosing Carbon Lab.jp】 ■ Good cost-performance ratio and guaranteed quality 【Results and Effects After Implementation】 ■ Leads to increased satisfaction with appearance ■ Minimal errors and the product is also aesthetically pleasing Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

We are pleased to announce that we have newly started handling sheet thicknesses of 1mm or less at Carbon Lab.jp. This will enable the production of thin carbon parts that were not previously supported. Until now, we have been able to accommodate sheet thicknesses ranging from 1.0mm to 10.0mm (available in 0.5mm increments). In addition to the above, we will now also support the following sheet thicknesses: - 0.2mm - 0.4mm - 0.5mm - 0.8mm This specification is highly recommended for customers who have been considering carbon parts of 1mm or less, want to manufacture lightweight and thin components, or have previously given up on estimates due to thickness constraints. We encourage you to take this opportunity to consider thin carbon parts that have been difficult to produce until now.

• plastic
• Composite Materials
• Processing Contract

This is a case where carbon pipes (CFRP) were introduced into the shafts of kayak paddles. 【Challenges Before Introduction】 ■ The fiberglass shafts broke. ■ The desired size was not available elsewhere. 【Reasons for Choosing Carbon Lab】 ■ Quick response to estimates and courteous service. ■ Reasonable pricing. ■ Ability to manufacture the desired size. 【Results and Effects After Introduction】 ■ Strength has increased compared to before breaking. Many other cases are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon sheet material (CFRP) for radio-controlled parts. [Challenges Before Introduction] - Aim to reduce weight from existing parts - Concerns about strength and precision with 3D printed parts [Reasons for Choosing Carbon Lab] - Affordable prices and easy ordering - Flexible support [Results and Effects After Introduction] - Good quality and smooth integration Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon plate material (CFRP) into a motorcycle stabilizer. [Challenges Before Introduction] - The existing stabilizer did not fit. - It was made of aluminum, which was costly. [Reasons for Choosing Carbon Lab] - It could be flexibly utilized even by individuals. - The procedure for creating drawings was explained. [Results and Effects After Introduction] - The quality was good, and it could be used without any issues. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please refer to the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon plate materials (CFRP) into the body design of a sumo robot. 【Challenges Before Introduction】 ■ Aluminum is heavy and difficult to balance ■ Processing carbon materials is costly 【Reasons for Choosing Carbon Lab】 ■ Can be produced relatively inexpensively ■ Quick response to inquiries and easy to consult 【Results and Effects After Introduction】 ■ Can be combined with existing parts without any discomfort Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are giving away free carbon sample parts. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon plate material (CFRP) for flower tags used with ornamental plants. [Challenges Before Introduction] - Many were made of inexpensive plastic. - Available overseas but could not be procured domestically. - Domestic suppliers had high costs, leading to abandonment of the idea. [Reasons for Choosing Carbon Lab] - Costs were kept lower compared to other companies. - The staff's response was kind, courteous, and trustworthy. [Results and Effects After Introduction] - The quality is good, and I am satisfied. Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please refer to the link below.

• plastic
• Composite Materials
• Processing Contract

★We are currently running a 20% OFF campaign on all products until December 21 (Sunday)! This is an example of introducing carbon round pipes (CFRP) for brass instrument stands. 【Challenges Before Introduction】 ■ High hurdles in terms of equipment and safety, unable to cut in-house ■ Tolerance management tends to be cumbersome and wasteful with each prototype 【Reasons for Choosing Carbon Lab.jp】 ■ Quick responses and estimates, flexible for small lots ■ Good dimensional stability for telescopic applications ■ Price was reasonable, and they provided careful support for technical inquiries 【Results and Effects After Introduction】 ■ Resolved challenges in cutting and end-face processing that were difficult to handle in-house ■ Dimensions stabilized within specified tolerances, and insertion and removal of the telescopic parts became smooth Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ The full text of the case study can be found at the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is an example of introducing carbon into RC car parts. 【Challenges Before Introduction】 ■ Existing parts are expensive ■ There are issues with heat and dust when machining by hand ■ Precision cannot be achieved when cutting from a sheet 【Reasons for Choosing Carbon Lab.jp】 ■ Can be cut into original shapes ■ Achieved at a lower cost than expected 【Results and Effects After Introduction】 ■ Quality is comparable to existing components We also introduce many other examples in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is an example of a team that participated in the All Japan Student Formula Competition and adopted carbon pipes for the purpose of vehicle weight reduction. [Challenges Before Implementation] - The cost of aluminum materials is high due to both material and processing costs. - The weight is also heavier compared to carbon. [Reasons for Choosing Carbon Lab.jp] - It is more affordable and has a quicker delivery time compared to others. [Results and Effects After Implementation] - We were able to solve the significant challenge of weight reduction. - It could be used without damage even after repeated test runs. We also introduce many other examples in our PDF materials and on our official website. Please take a look at the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please refer to the link below.

• Composite Materials
• plastic
• Processing Contract

Thank you for your attention. This is an example of a team that participated in the All Japan Student Formula Competition, which adopted carbon (CFRP) for the vehicle's steering wheel. [Challenges Before Implementation] - The weight was heavy, posing a challenge for weight reduction. - The grip area was difficult to hold, resulting in poor operability. [Reasons for Choosing Carbon Lab.jp] - It was used by previous team members. [Results and Effects After Implementation] - Achieved significant weight reduction while maintaining sufficient rigidity. - Improved operability. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is a case study of introducing carbon into RC car parts. [Challenges Before Introduction] ■ It is difficult to process according to the design when making it myself. [Reasons for Choosing Carbon Lab.jp] ■ Easy same-day quotes with just 3D CAD data. ■ Cheaper compared to the cost of processing it myself. [Results and Effects After Introduction] ■ Improved appearance and made driving more enjoyable. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• Composite Materials
• plastic
• Processing Contract

Thank you for your attention. This is a case study on the introduction of carbon into RC car parts. 【Challenges Before Introduction】 ■ DIY efforts were costly and lacked precision. 【Reasons for Choosing Carbon Lab.jp】 ■ Can be produced at a low cost. ■ Quick estimates and courteous staff response. 【Results and Effects After Introduction】 ■ Increased the strength of the reissued RC cars. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon into RC (radio-controlled) car parts. [Challenges Before Introduction] ■ Unable to find a carbon supplier that can process small quantities. [Reasons for Choosing Carbon Lab.jp] ■ Quick response and low prices. ■ Careful handling, which made it easy to use with peace of mind. [Results and Effects After Introduction] ■ Processing accuracy improved compared to self-made parts. ■ High-precision parts were created at a low cost. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

【Challenges Before Introduction】 ■ There were no satisfactory commercial products available. 【Reasons for Choosing Carbon Lab.jp】 ■ Custom sizes that are not available in commercial products can be ordered. ■ The prices are affordable and the delivery speed is fast. ■ It was easy for amateurs to place an order. 【Results and Effects After Introduction】 ■ The appearance is good and the processing accuracy is high. Other cases are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

【Challenges Before Implementation】 ■ Aluminum sheets do not achieve strength unless they are thickened or ribs are added. ■ Aluminum will corrode if not painted. 【Reasons for Choosing Carbon Lab.jp】 ■ Reasonable pricing and fast delivery speed. 【Results and Effects After Implementation】 ■ Finished very compact and lightweight. ■ Can subtly showcase carbon with a matte finish. We also introduce many other cases in our PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is an example of introducing carbon into RC car parts. [Challenges Before Introduction] ■ 3D printed prototypes could not confirm strength and were costly. [Reasons for Choosing Carbon Lab.jp] ■ Can handle small lots at low cost. ■ High-precision processing can be achieved according to drawings with simple design data. [Results and Effects After Introduction] ■ Prototyping costs were reduced compared to domestic suppliers. ■ Price and quality stabilization was achieved. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is a case study on the introduction of carbon into automotive competition steering-related parts. 【Challenges Before Introduction】 ■ Aluminum cannot achieve both lightness and rigidity. ■ Other materials are also expensive. 【Reasons for Choosing Carbon Lab.jp】 ■ Quick response for estimates and competitive pricing. ■ Estimates can be requested with only .stp files. 【Results and Effects After Introduction】 ■ Cost reduction achieved and performance satisfaction. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is a case study on the introduction of carbon round pipe parts in beauty and hairdressing supplies. 【Challenges Before Introduction】 ■ Strength and price did not match with other materials. 【Reasons for Choosing Carbon Lab.jp】 ■ Ease of ordering and speed of quotations. ■ The staff's response was polite and reassuring. 【Results and Effects After Introduction】 ■ Quality is stable and assembly speed is fast. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

Thank you for your attention. This is a case study on the introduction of carbon into RC car parts. [Challenges Before Introduction] ■ The strength of 3D printer resin is insufficient. [Reasons for Choosing Carbon Lab.jp] ■ The response was quick and flexible. ■ It can be produced at a low cost if data is created. [Results and Effects After Introduction] ■ High processing accuracy and satisfactory costs. We also introduce many other case studies in our PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case study of a carbon meter panel made for motorcycles using carbon (CFRP). 【Challenges Before Introduction】 ■ In-house production could not maintain processing accuracy ■ Did not know which companies could handle processing requests 【Reasons for Choosing Carbon Lab.jp】 ■ Quick response for estimates and competitive pricing 【Results and Effects After Introduction】 ■ Fast delivery and satisfaction with processing accuracy Other case studies are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case study of a leverless controller top plate made from carbon (CFRP) for use in fighting games. 【Challenges Before Implementation】 ■ There are still few companies that can create top plates. ■ I had no choice but to make the top plate myself. 【Reasons for Choosing Carbon Lab.jp】 ■ It had a high reputation on social media. ■ The staff's response was good. ■ It was more affordable than I expected. ■ The headquarters is local. 【Results and Effects After Implementation】 ■ I was able to create the ideal top plate I was looking for. Other case studies are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are giving away free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of a suspension arm for an RC car made from carbon (CFRP). 【Challenges Before Implementation】 ■ The genuine parts interfere with other components. ■ FRP materials lack strength. 【Reasons for Choosing Carbon Lab.jp】 ■ The price is satisfactory, and the response speed is quick. ■ Carbon Lab has previous experience in manufacturing RC car parts. 【Results and Effects After Implementation】 ■ Parts with dimensions almost identical to the genuine ones were created. ■ There are no quality issues at all. Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case of producing a car license plate stay using carbon plates. 【Challenges Before Implementation】 ■ Metal materials such as steel plates and aluminum plates are heavy. ■ In-house production is costly and lacks precision. 【Reasons for Choosing Carbon Lab.jp】 ■ Able to request the creation of design data. 【Results and Effects After Implementation】 ■ Good precision and satisfaction with the price. Other cases are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case where the fishing rod and reel seat were made from carbon round pipes. 【Challenges Before Introduction】 ■ Other companies had poor precision, resulting in manual work. 【Reasons for Choosing Carbon Lab.jp】 ■ The quality was high and the precision was good during previous orders. ■ The price was also reasonable. 【Results and Effects After Introduction】 ■ Manual work was eliminated, reducing labor costs. We also introduce many other cases in our PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are giving away free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case where the knuckle arm was changed from genuine aluminum parts to carbon (CFRP). 【Challenges Before Introduction】 ■ Frequent breakage and deformation with genuine aluminum parts ■ Replacement cost is also very high, over 1000 yen per piece 【Reasons for Choosing Carbon Lab.jp】 ■ Estimates are provided as quickly as the same day 【Results and Effects After Introduction】 ■ High processing accuracy and satisfaction Other cases are also introduced in the PDF materials and official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon (CFRP) into parts for sumo robot competitions. 【Challenges Before Introduction】 ■ Heavy weight and insufficient strength with other materials ■ Other vendors do not accommodate individual requests 【Reasons for Choosing Carbon Lab.jp】 ■ Quick response from staff and fast delivery times ■ Ability to request design data creation 【Results and Effects After Introduction】 ■ Successful weight reduction and strength enhancement Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case where parts for a robot participating in the NHK Student Robot Contest were made from carbon (CFRP). 【Challenges Before Introduction】 ■ Long manufacturing period and delayed delivery domestically ■ Importing foreign products takes time 【Reasons for Choosing CarbonLab.jp】 ■ Fast delivery and low prices for ready-made products 【Results and Effects After Introduction】 ■ Successfully incorporated into the robot without issues regarding strength, diameter, etc. ■ Used throughout the competition without breaking Other cases are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon plates (CFRP) into the frame of a machine for a robot contest. We also offer free sample gifts, so please feel free to ask any questions or inquiries. 【Challenges Before Introduction】 ■ It is difficult to achieve both strength and lightness with other materials. 【Reasons for Choosing Carbon Lab.jp】 ■ The staff's response was quick and favorable. 【Results and Effects After Introduction】 ■ The process from order to product arrival was smooth. ■ I was satisfied with the ability to reproduce fine shapes. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are giving away free carbon sample parts for those who want to know about processing quality and strength. We have carbon plates and round pipes available. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of introducing carbon into RC car parts. [Challenges Before Introduction] - Custom aluminum plate processing does not achieve the precision of machining. - Aluminum does not provide sufficient strength and leads to distortion. [Reasons for Choosing Carbon Lab.jp] - I was looking for a company that could manufacture from a single piece. - They provided careful support, making the ordering process smooth. [Results and Effects After Introduction] - The precision is perfect, and I am considering reordering. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case where a carbon plate was used to manufacture a ring for attaching the robe's collar. [Challenges Before Introduction] ■ The plastic version did not have a good texture. ■ We were looking for something that could be prepared at a low cost. [Reasons for Choosing Carbon Lab.jp] ■ They responded clearly to our detailed requests. [Results and Effects After Introduction] ■ We were able to solve our issues and are satisfied. Other cases are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• Composite Materials
• plastic
• Processing Contract

This is a case study of a carbon plate part made to be installed in the cavity left after removing the factory navigation system from a car. 【Challenges Before Implementation】 ■ The area where the factory navigation system was removed becomes a cavity. ■ Using wood is difficult considering processing costs and labor. 【Reasons for Choosing Carbon Lab.jp】 ■ Free sample products could be ordered before placing an order. 【Results and Effects After Implementation】 ■ Concerns about strength were resolved. Other case studies are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon plates and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of a rear damper stay for a radio-controlled buggy made from carbon (CFRP). 【Challenges Before Implementation】 ■ It was difficult to drill holes accurately in a homemade version. 【Reasons for Choosing Carbon Lab.jp】 ■ I could request the creation of design data. ■ The response was polite and prompt. ■ The price was reasonable. 【Results and Effects After Implementation】 ■ Increased rigidity and improved texture. Other examples are also introduced in the PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is an example of a rear shelf board for a car made from carbon (CFRP). [Challenges Before Introduction] ■ The desired size is not available on the market. [Reasons for Choosing Carbon Lab.jp] ■ Able to accommodate the desired size. ■ Delivery time is also within a reasonable range. [Results and Effects After Introduction] ■ Quality is satisfactory and surface finish is good. Other examples are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we are offering free carbon sample parts for those who want to know about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the example, please check the link below.

• plastic
• Composite Materials
• Processing Contract

This is a case of introducing carbon plates (CFRP) for motorcycle stabilizers. 【Challenges Before Introduction】 ■ The material known as dry carbon is difficult to obtain locally. ■ There is no know-how regarding processing. 【Reasons for Choosing Carbon Lab.jp】 ■ I did not know any other companies from which to obtain quotes. 【Results and Effects After Introduction】 ■ The outcome was sufficiently satisfactory. Other cases are also introduced in PDF materials and on the official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, for those who want to know about processing quality and strength, we are offering free carbon sample parts. We have two types available: carbon plates and round pipes. Please apply via the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case, please check the link below.

• plastic
• Composite Materials
• Processing Contract

A case study of gear made from carbon fiber reinforced plastic (CFRP) for the sport "Jaguar," which originated in the West. 【Challenges Before Implementation】 ■ Original material: PVC pipes are heavy and have poor operability. ■ Original material: Bamboo is inexpensive but has significant individual variation and unstable quality. 【Reasons for Choosing Carbon Lab.jp】 ■ We were able to produce carbon pipes of the desired thickness. ■ We wanted to use carbon that allows for weight reduction while maintaining strength. 【Results and Effects After Implementation】 ■ We received parts that are lightweight, durable, and of quality exceeding our expectations. We also introduce many other case studies in PDF materials and on our official website. Please check the link below. https://cfrp-japan.com/case/ Additionally, we offer free carbon sample parts for those interested in knowing about processing quality and strength. We have two types available: carbon sheets and round pipes. Please apply through the link below. https://cfrp-japan.com/contact/present202105/ For the full text of the case study, please visit the link below.

• plastic
• Composite Materials
• Processing Contract