アズサイエンス Product Lineup

■ Non-Freon refrigerant, not subject to the Freon emission reduction law ■ Compact personal type that can be installed anywhere ■ Door latch with magnetic packing ■ Organic EL control panel with USB port ■ Various display screens using organic EL

• Refrigerators and freezers
• refrigerator
• refrigerator

■Microcurrent Measurement - Enabled by a structure utilizing guard potential technology, capable of measuring microcurrents at the fA level. - Achieves low noise and high precision measurements. ■Easy Operation - External automatic control and manual operation via joystick (6 movement modes) are possible. * Both semi-automatic and manual operations are easy, contributing to improved measurement efficiency. ■Standard Compatibility with Major Measurement Instrument Manufacturers' Systems and Software - Keysight Technologies (B1500A Semiconductor Device Parameter Analyzer, EasyEXPERT) - Keithley Instruments (Systems and instruments equipped with ACS (measurement software)) * Custom support for other measurement instrument control and software is available. ■Diverse Options and Customization Support - Supports evaluation of temperature-dependent characteristics using a hot chuck (from +40°C to +200°C). - Allows for the installation of microcurrent probe cards using probe card adapters. - Customization is available according to the intended use.

• Other physicochemical equipment
• Semiconductor inspection/test equipment

AUTiv is a device that enables automatic drug administration into the tail vein of mice without anesthesia for the first time in the world. Administering drugs into the tail vein of mice is a common technique in animal experiments, but it requires precise puncturing of a syringe needle that is similar in thickness to the tail vein, necessitating advanced skills. There have been attempts at automatic puncturing in mice and rats, but due to factors such as the movement of the mice and the thinness of the tail vein, automatic puncturing without anesthesia has been technically challenging. AUTiv can automatically administer drugs while accurately recognizing and controlling the positions of the tail vein and the syringe needle. This automation technology integrates PFN's deep learning technology with hardware technology. *For more details, please refer to the catalog or feel free to contact us.*

• Other physicochemical equipment

Smart Mat Cloud (SMC) was released in 2018, with a cumulative implementation record of 1,600 cases (as of the end of 2023). It has been implemented in various industries, including manufacturing, chemical industry, food manufacturing, healthcare, hospitals, pharmaceuticals, and printing. It visualizes on-site inventory using IoT devices, allowing for inventory management and order management all in one, improving employee work styles. It automatically orders items by weight, ranging from research reagents, solvents, and pharmaceuticals to scientific products, experimental supplies, and medical materials. *For more details, please refer to the catalog or feel free to contact us.*

• Purchasing Management System

Cerabo Healthcare Service Co., Ltd. presents the LamiFlow Rack System, a one-directional airflow animal breeding rack that improves the environment within the breeding room and cages while accommodating cages for rodents such as mice, rats, and rabbits. It can be manufactured for small to medium and large animals. Additionally, it is possible to use the same rack even if the cage shapes and dimensions vary slightly. 〇 Features - Creates a safe, hygienic, and energy-efficient workspace - Achieves uniform temperature distribution with good airflow - Provides a friendly living environment for the animals being bred *For more details, please refer to the catalog or feel free to contact us.

• others

Cerabo Healthcare Service Co., Ltd. Ailax System is an animal housing rack for mice and rats that combines the "ease of operation" of open racks with the "safety" of IVC, featuring a unidirectional airflow with individual cage ventilation. The LamiFlow rack system has been upgraded. It is easy to operate and safe. [Patent No. 4961404, No. 5749901] 〇 Features - Creates a safe and hygienic energy-saving work environment - Provides a mouse and rat-friendly living environment - Easy maintenance *For more details, please refer to the catalog or feel free to contact us.

• others

Cerabo Healthcare Services Co., Ltd. All-in-One CP Unit is a clean booth for cell culture that consolidates the necessary elements for a cell culture processing facility (CPC, CPF) used in regenerative medicine into a compact size. It allows for the establishment of a clean environment in limited spaces within hospitals or tenant buildings with many constraints in a short period. 〇 Features - Ductless design for easy integration into existing facilities - Quick installation - Layout customizable to suit specific applications *For more details, please refer to the catalog or feel free to contact us.

• Clean Booth

Cerabo Hess Care Service Co., Ltd.'s Air Barrier Booth purifies the air inside the booth by blowing air through a HEPA filter from a fan filter unit (FFU) installed in the booth ceiling. Additionally, it prevents the entry of external contaminants by creating an airflow directed outside the booth from an open area without doors. 〇 Features - Maintains a clean environment without doors - Easily upgrades the clean environment of existing facilities - Capable of creating multiple area-specific zones within a single room *For more details, please refer to the catalog or feel free to contact us.

• Clean Booth

Testo Inc. - The Testo 190 series is an ideal logger for temperature and pressure measurement and validation in high-pressure steam sterilization and freeze-drying processes required by the pharmaceutical industry. It is also suitable for leak testing or pressure checks in autoclaves. It features a wide measurement temperature range from -50°C to +140°C and can withstand pressures up to 4 bar. 〇 Features - Heat resistance: Passed a series of tests for over 1,500 hours of operation in an autoclave. - Robustness: The body is made of SUS316L, and the battery uses high-performance resin PEEK. - Safety: Intuitive battery replacement without the need for special tools. *For more details, please refer to the catalog or feel free to contact us.

• Data Logger

Testo Inc.'s Labor-Saving Solutions Labor-saving generally refers to reducing unnecessary processes and decreasing the number of personnel required for a task through work efficiency and equipment improvements. Proper labor-saving can achieve a reduction in work hours, increased efficiency, improved productivity, and reduced labor costs. At Testo, we offer various solutions to help our customers achieve labor-saving in environmental measurement operations. ■ Cloud Monitoring Logger testo Saveris 2 Series Streamline measurement operations with a cloud monitoring logger ■ Infrared Thermography testo 868 Reduce work time with thermography that visualizes temperature anomalies as thermal images ■ Hood Airflow Meter testo 420 Use a lightweight airflow meter to measure ventilation volume at air supply openings, improving efficiency, reducing work time, and decreasing the number of personnel *For more details, please refer to the catalog or feel free to contact us.

• others

Testo Inc. - Cloud Monitoring Logger testo Saveris 2 /testo 160 is a data logger that automatically sends recorded measurement data to a cloud database via a Wi-Fi access point. The measurement data accumulated in the cloud can be accessed anytime via a browser on a computer, smartphone, or tablet over the internet. 〇Features - Access data anytime, anywhere - Easy setup, no dedicated software required - No hassle of data collection - Email notifications for threshold deviations - Reliable backup memory *For more details, please refer to the catalog or feel free to contact us.

• Data Logger

Testo Inc. - The testo 184 series transport data loggers are USB-type temperature, humidity, and shock loggers for transportation. With a thickness of less than 12mm, they are easy to fit inside packaging and can record the conditions of temperature, humidity, and shock during transport. Settings can be configured using the built-in PDF document on the device, and after recording is complete, a PDF summary report is automatically generated. 〇 Features - No dedicated software required - Threshold deviation display - Direct USB connection - Timestamp function *For more details, please refer to the catalog or feel free to contact us.

• Data Logger

Testo Inc. - Environmental Data Logger - Testo 174 / 175 / 176 Series The Testo 174 series features built-in sensors and is lightweight and compact. The Testo 175/176 series comes with either built-in sensors or external probes. 〇 Features - Choose from a wide variety of 13 different types - Installation and retrieval type - Maximum / Minimum value / Threshold deviation display *For more details, please refer to the catalog or feel free to contact us.*

• Data Logger

Testo Inc. - The testo Saveris 1 environmental monitoring system seamlessly monitors environmental parameters such as temperature, humidity, and differential pressure through a fully automated monitoring system. This system is highly flexible, allowing for the integration of other necessary parameters with additional components. 〇 Features - A centralized management system composed of sensors, software, and services - Seamless recording and documentation of all environmental parameters related to audits - A verifiable on-premises solution in accordance with GAMP, including audit trails and ERES (electronic records and signatures) compliant with 21 CFR Part 11 - Access to measurement data anytime via PC or tablet/smartphone *For more details, please refer to the catalog or feel free to contact us.

• Other environmental analysis equipment

Here are three recommended products: ◆ JEOL Ltd. JEM-ARM200F NEOARM Atomic Resolution Analytical Electron Microscope Equipped with a cold field emission gun (Cold-FEG) and a new spherical aberration corrector (ASCOR) capable of correcting higher-order aberrations as standard, it enables atomic resolution observation not only at a high acceleration voltage of 200 kV but also at a low acceleration voltage of 30 kV. This makes it easier to observe materials containing light elements with clear contrast. ◆ Nikon Solutions Co., Ltd. Polarized/Dispersion Microscope ECLIPSE LV100ND POL/DS This microscope can measure the properties of asbestos, such as refractive index, birefringence, retardation, extinction angle, pleochroism, and elongation, aiding in the identification of asbestos. It allows for dispersion staining observation at a magnification of 400 times. ◆ JEOL Ltd. JMS-T100LP AccuTOF LC-Express Atmospheric Pressure Ionization Time-of-Flight Mass Spectrometer This high-throughput mass spectrometer aims for high productivity with features such as multi-ionization, robustness, and easy maintenance. It is capable of analyzing a wide range of samples from low polarity to high polarity.

• Analytical Equipment and Devices

We would like to introduce three products from Japan Electronic Corporation that can be utilized in various fields. If you are interested, please feel free to contact us. 〇 JPS-9030 Photoelectron Spectrometer (XPS) This is a general-purpose XPS that realizes "anyone can use it easily and immediately." It comes standard with a Kaufman-type etching ion source and twin anodes, and despite being a general-purpose XPS, it also has a wide range of expandability, including a high-temperature heating system and gas cluster ion source. 〇 JEM-1400Flash Electron Microscope This transmission electron microscope is equipped with a high-sensitivity sCMOS camera and incorporates powerful new features such as an ultra-wide field montage system and optical microscope image linking functionality. 〇 JCM-7000 NeoScope Desktop Scanning Electron Microscope This desktop scanning electron microscope aims to allow anyone to observe and analyze. It features a low vacuum mode that requires no pre-treatment and a stage navigation system for easy field searching. It includes functions such as Zeromag, which allows direct transition from optical images to SEM images, Live Analysis for elemental analysis while observing, and Live 3D for three-dimensional observation during SEM observation.

• Other physicochemical equipment

Nikon Solutions Co., Ltd. ECLIPSE Ji is Nikon's first research-use digital inverted microscope. By eliminating the eyepiece, it achieves a new design that combines ease of learning and usability while maintaining Nikon's proud optical quality and wide field of view (FOV). It enables imaging in an optimal environment for your research purposes. It streamlines the imaging workflow and assists in data acquisition. 〇 Features - Benchtop inverted microscope that does not require a darkroom - Versatile bioassays - AI-supported observation/analysis - Nikon's proud optical quality *For more details, please refer to the catalog or feel free to contact us.

• Other microscopes

Here are three products from JEOL Ltd. that can be used in various fields: 〇 JSM-IT200 InTouchScope Scanning Electron Microscope This product is designed with a focus on cost performance, making it simple and easy to use. It features a user-friendly sample exchange guide that allows beginners to easily set up samples, search for fields of view, and start observing SEM images. 〇 JEM-ARM200F NEOARM Atomic Resolution Analytical Electron Microscope Equipped with a cold cathode field emission gun (Cold-FEG) developed with JEOL's unique technology and a new spherical aberration corrector (ASCOR) capable of correcting higher-order aberrations, this microscope achieves atomic resolution not only at a high acceleration voltage of 200 kV but also at a low acceleration voltage of 30 kV. It also includes a system that automatically performs high-speed and accurate aberration correction. 〇 JEM-F200 Multifunctional Electron Microscope This transmission electron microscope is designed to improve spatial resolution and analytical performance while considering operability for various applications. It features a new operating system that appeals to both beginners and experienced users with its smart appearance. Developed with energy efficiency and CO2 reduction as its concept, it is a field emission type electron microscope.

• Electron microscope

JEOL Ltd. JSM-IT710HR Scanning Electron Microscope In addition to its resolution and analytical performance at the nanometer scale, throughput during data acquisition is also important. The newly developed JSM-IT710HR is a fourth-generation model in JEOL's HR series, themed "Anyone can easily capture high-resolution images with SEM." It features enhanced operability with expanded automatic functions and improved observation performance with a new detector system. ○ Features - SEM images are visible in conjunction with optical images - High-resolution electron gun for better visibility - Automatic measurement function: Simple SEM/EDS - Real-time 3D image construction: Live 3D - New low vacuum secondary electron detector LHSED - Stability of the Schottky FE electron gun enhanced to over four times compared to previous models *For more details, please refer to the PDF or feel free to contact us.

• Electron microscope

The JSM-IT210 scanning electron microscope from JEOL Ltd. is the most compact scanning electron microscope among JEOL's benchtop models. The newly developed stage features all five axes driven by motors, allowing for safer and faster operation. ○ Features - "Sample Exchange Navigation" for easy observation after inserting the sample - "Zeromag" for magnifying optical images into SEM images - "Live Analysis" for continuous elemental analysis during observation - "Simple SEM" for a variety of automatic measurements - Functions that strongly support automatic measurements - Faster analysis - Standard equipped with a 60 mm² large-diameter EDS *For more details, please refer to the PDF or feel free to contact us.

• Electron microscope

Nihon Kasei Co., Ltd. Etak Division Low Temperature Constant Temperature (Constant Humidity) Device HIFLEX SC SIMPLICORE is a product that pursues a balance of cost performance without compromising on quality while keeping prices low. It is sold alongside the HIFLEX NEO series, aiming to provide the best options for our customers' needs. ○ Features - Equipped with a proven constant-speed refrigeration unit and ETAC standard controller - Achieves a wide range of temperature and humidity with high precision - Low-cost, short delivery design *For more details, please contact us.

• Thermostatic chamber

The MCL42 capacitor characteristic evaluation system from Nambon Kasei Co., Ltd. Etak Division uses the Keysight LCR meter E4980A as its core and measures the temperature and frequency characteristics of five key properties of up to 40 capacitors using a scanner unit. 1. Capacitance (C) 2. tanδ (D) 3. ESR 4. Impedance (Z) 5. Phase (θ) ○ Features - Automatically measures temperature and frequency characteristics using the HIFLEX-NEO series - Individual OPEN/SHORT corrections are possible for each channel, temperature, and frequency - LOAD corrections can be made for each channel and frequency *For more details, please contact us.

• Testing Equipment and Devices

Nihon Kasei Co., Ltd. Etak Division's capacitor lifespan evaluation system TLE60 is a system where the application and measurement circuits are independent for each channel. It is capable of conducting burn-in tests and lifespan evaluations for capacitors. ○ Features - Per-pin architecture - High current - The 250V type is equipped with a "stop function" for failure analysis *For more details, please contact us.

• Testing Equipment and Devices

The Nankatsu Chemical Co., Ltd. Etak Division Multi-Event Detector (Momentary Disconnection Detection) ED71 can detect events (momentary disconnections) at the fastest interval of 50 nsec. Resistance measurement is also performed simultaneously with event (momentary disconnection) detection. ○ Features - Enables reliable measurement of conductive communication including multi-channel events (momentary disconnections) - Can be linked with vibration machines and drop testers - Easy operation and data management through a Windows application *For more details, please contact us.

• Testing Equipment and Devices

The Nakanishi Chemical Co., Ltd. conduction reliability measurement system MLR23 supports high-speed temperature cycling with the industry's fastest measurement capabilities. It is equipped with a scanner circuit, allowing for multi-channel conduction (junction) reliability measurements. ○Features - Two measurement modes: high-speed mode and high-precision mode - Supports both AC and DC measurement modes - Number of channels ranges from 32 to 288 *For more details, please contact us.

• Testing Equipment and Devices

Nihon Kasei Co., Ltd. Etak Division's Insulation Reliability Measurement System SIR13 is an insulation reliability measurement system capable of multi-channel insulation reliability measurement. ○ Features - Measures and judges at 20 msec intervals across all channels, allowing for the detection of not only time-dependent insulation degradation but also electrochemical migration without missing any. - Maximum applied voltage can be selected from 250V, 1kV, 1.5kV, 3kV, 6kV, or 10kV. - Number of channels ranges from 8 to 128 channels. - The power supply for voltage application is independent for each channel. *For more details, please refer to the PDF or feel free to contact us.

• Testing Equipment and Devices

Nihon Kasei Co., Ltd. Etak Division Rapid Temperature Change Tester weisstechnik ClimeEvent is the global standard for rapid temperature change testers. It can comfortably accommodate various testing standards. ○ Features - Fastest rapid temperature change of 25°C/min and maximum heating load of 8kW - Wide temperature and humidity range with good humidity tracking due to a unique humidification method - Original mechanism provides a more comfortable testing environment *For more details, please refer to the PDF or feel free to contact us.

• Environmental Test Equipment

Nakamoto Kasei Co., Ltd. Etak Division Sample Moving Type Thermal Shock Tester Weiss Technik ShockEvent is an environmental testing device from Weiss Technik that complies with major testing standards in Europe and around the world. It is equipped with a variety of user-friendly features to create a comfortable testing environment. ○ Features - Large observation window with high visibility - Access port that minimizes load on measurement cables - Defrost-free function for over 1000 cycles - Adoption of the new refrigerant "R449A," which has a global warming potential (GWP) about one-third that of the conventional R-404A - Significant reduction in unnecessary power consumption by not heating or cooling tanks that are not in use for testing * For more details, please refer to the PDF or feel free to contact us.

• Testing Equipment and Devices

Nakamoto Kasei Co., Ltd. Etak Division Pharmaceutical Stability Testing Equipment / Stability Testing Room LABONIC is a series developed based on years of cultivated temperature and humidity control technology, suitable for stability testing. It covers the temperature and humidity control range required for typical stability testing conditions. ○ Features - Non-frost design allows for continuous operation without interrupting tests - Secures a larger capacity relative to installation space, allowing for more samples to be stored - Standardly equipped with a capacitive polymer humidity sensor, eliminating the need for regular wick replacement *For more details, please contact us.

• Testing Equipment and Devices

Nakamoto Kasei Co., Ltd. Etak Division Dew Cycle Tester DEW CYCLE reproduces the condensation conditions of electronic devices moving in environments with temperature and humidity differences, in a setting that is closer to reality. Its 2-way use allows for efficient operation. ○Features - Modes can be easily switched based on input conditions on the operation screen - User-friendly mechanism - Polymer sensor *For more details, please contact us.

• Environmental Test Equipment

Nihon Kasei Co., Ltd. Etak Division Large Constant Temperature (Constant Humidity) Chamber COLONIA E maintains its high performance while significantly improving operability and functionality, and it is a walk-in chamber that uses the new refrigerant R-448A. ○ Features - New controller that ensures reliability testing is safe, comfortable, and hassle-free - Easy-to-read indoor condition display panel - Secures effective space in the testing room *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Chemical Co., Ltd. Etak Division High-Temperature Oven HISPEC H Type is a high-temperature oven suitable for a wide range of applications, including heat resistance testing and high-temperature lifespan testing of inorganic materials such as ceramics and various metals, as well as engineering plastics. ○ Features - High performance and high precision! - Safety-focused design - User-friendly controller * For more details, please refer to the PDF or feel free to contact us.

• Testing Equipment and Devices

Heat treatment of electronic components with copper and silver electrodes is conducted in a nitrogen gas atmosphere to prevent oxidation. The HISPEC N type constant temperature chamber developed by Kusumoto Chemical Co., Ltd. in the Etak division is a dedicated chamber designed for such specialized heat treatment. ○ Features - Guarantees residual oxygen concentration below 100 ppm - Improved productivity through enhancements in the temperature drop mechanism - Uniformity of temperature improves the yield of heat treatment *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nakamoto Kasei Co., Ltd. Etak Division Solvent Drying Safety Specification Constant Temperature Chamber HISPEC HG type is a solvent drying safety specification constant temperature chamber developed with the concept that "safety takes precedence over everything." Please use it as a safety measure for heating and drying processes. ○ Features - Adoption of forced exhaust system - Standard equipped with gas concentration alarm - User-friendly safety design - Safety mechanisms equipped throughout * For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nakamoto Kasei Co., Ltd. E-Tack Division's HISPEC K-type forced hot air exhaust constant temperature oven is a high-temperature oven developed as a heat treatment device for secondary vulcanization, represented by silicone rubber. It features a one-directional complete exhaust system that efficiently discharges precipitates outside the chamber during vulcanization. ○ Features - Discharges precipitates outside during vulcanization - Double-opening doors for better usability - Standard equipped with auto start/auto stop/weight function - Standard equipped with double-opening doors - Achieves both safety and maintainability *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nakamoto Kasei Co., Ltd. Etak Division's HISPEC S-type constant temperature chamber with explosion vent is suitable for samples that generate volatile gases (vapor) during heat treatment or drying. It is designed for safe use, even in the event of an explosion inside the chamber, as it is equipped with an exhaust vent that directs wind pressure to the ceiling. ○ Features - Equipped with a vent that completely exhausts wind pressure - The exhaust section covers up to a height of 1.8m for safety considerations - Excellent operability * For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Chemical Co., Ltd. Etak Division's HISPEC vertical series constant temperature chamber is a high-performance constant temperature device (constant temperature bath) designed for space-saving, in addition to the basic performance of the HISPEC horizontal model. It can thermally process many samples thanks to its excellent hot air circulation function. ○ Features - Durable heater unit - Improved safety during door opening and closing while in operation - Dial-type damper knob - Adoption of heat-resistant decorative frame for control equipment - Capable of thermally processing many samples simultaneously *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Chemical Co., Ltd. E-Tack Division's HISPEC Horizontal Series constant temperature bath is a high-performance constant temperature device (constant temperature tank) that integrates E-Tack's unique manufacturing technology with the latest electronics technology, achieving high-precision temperature control through digital control. To accommodate long-term continuous operation on production lines, the durability of key units centered around the motor and heater is designed with ample margin. ○ Features - Achieves high-precision temperature distribution performance by eliminating overshoot - Reduces costs through modularization of the heater unit - Allows for function switching according to purpose - Simple maintenance zone *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Kasei Co., Ltd. Etak Division Temperature Cycle Tester (Air Chamber Type) WINTECH NEO is a temperature cycle tester equipped with the low GWP refrigerant R-448A (GWP value: 1387), featuring the high basic performance that WINTECH is committed to. ○ Features - Recovery performance achieved in the shortest time - Operating history download function - Standard equipped with room temperature exposure function - A 300℃ specification is also available, enhancing all basic performance for reliability evaluation of power devices *For more details, please refer to the PDF or feel free to contact us.

• Testing Equipment and Devices

Nihon Kasei Co., Ltd. Etak Division Compact / Multi-tier Low Temperature Constant Temperature and Humidity Chamber / Low Temperature Humidity Chamber HIFLEX NEO-ES is a low temperature constant temperature and humidity chamber that inherits the high basic performance of HIFLEX NEO-E. It achieves overwhelming space efficiency. ○Features - Achieves up to 80% reduction in space efficiency through unique stacked housing design - Temperature drop rate 1.8 times faster - Allowable heat generation increased by 940% - Power consumption reduced by up to 69% *For details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Chemical Co., Ltd. Etak Division Low GWP Refrigerant Equipped Ultra-Low Temperature Constant Temperature (Constant Humidity) Device FX631N-E / FL631N-E is an ultra-low temperature constant temperature (constant humidity) device equipped with the new refrigerant R-469A. The GWP value of "R-469A" has performance equivalent to R-23, and it is a non-flammable, non-toxic, and non-corrosive new refrigerant that does not compromise on usability or cost-effectiveness. ○ Features - Strong against water circuits - User-friendly mechanism - Achieves energy savings and high performance while reducing environmental impact * For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nihon Kasei Co., Ltd. Etac Division's HIFLEX NEO-EL series ultra-low temperature constant temperature (constant humidity) device, equipped with low GWP refrigerants, is a basic model that inherits the fundamental concept of "safety, comfort, and hassle-free" from ETAC environmental testing equipment, always considering the perspective of the user, along with high environmental performance. ○ Features - Uses the new refrigerant R-448A with a GWP value of 1387 - Achieves continuous operation at 85°C and 85% humidity for 1000 hours - Maintains water quality with a humidification water sterilization device - Uses corrosion-resistant materials for the cooling coil *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

Nakamoto Kasei Co., Ltd. Etak Division HIFLEX NEO E is a low-temperature constant temperature and humidity device that offers "safety, comfort, and hassle-free" operation. It significantly exceeds the GWP target value of 1,500 set by the Fluorocarbon Emission Control Law for 2025. ○ Features - Uses the new refrigerant R448A with a GWP value of 1387. - Capable of continuous operation at 85°C and 85% humidity for 1,000 hours by recovering and reusing water vapor. - Improved reliability of the water circuit, which is prone to causing troubles. - Three operation methods to choose from, ranging from simple constant operation to advanced programmed operation, depending on purpose and preference. - Equipped with the latest standard DC inverter rotary compressor, achieving energy savings and high performance while reducing environmental impact. *For more details, please refer to the PDF or feel free to contact us.

• Thermostatic chamber

We would like to introduce three recommended products from Azusa Science. ◆ JEOL Ltd. JEM-1400Flash Electron Microscope This transmission electron microscope features a high-sensitivity sCMOS camera, an ultra-wide field montage system, and an enhanced linking function between optical microscope images and electron microscope images. It is utilized across a wide range of fields, including biology, nanotechnology, polymers, and advanced materials. ◆ JEOL Ltd. JPS-9030 X-ray Photoelectron Spectroscopy (XPS) System Equipped with a Kaufman-type etching ion source and twin anodes as standard, this versatile XPS system also offers extensive expandability with high-temperature heating systems and gas cluster ion sources. It is widely used from universities to factories as a highly versatile analytical method in material research and development, as well as in quality control. ◆ Nikon Solutions Co., Ltd. Internal Oblique Stereo Microscope SMZ445/460 This stereo zoom microscope series from Nikon boasts excellent optical performance similar to that of their cutting-edge models. It is suitable for inspecting and observing resin molded products and metal processed parts. It meets the needs for component inspection and quality control.

• others

Nikon Solutions Co., Ltd. presents the SMZ stereo microscope, which features a "dual zoom objective binocular" that maintains the same focal point even when the magnification is changed. There is almost no shift in focus or difference in magnification between the left and right sides. 〇Features - The viewing angle is 45°. Comfortable and reliable observation can be conducted. - Comfortable and reliable observation can be conducted. - Compact design with the zooming ring installed horizontally (rotation angle 90°). *For more details, please contact us.

• Other microscopes