新井機械製作所 List of Products and Services

Our company manufactures and sells the food-use deep fryer "2-in-1 Fryer." The food-use deep fryer "2-in-1 Fryer" has been modified to have one frying pot and two frying baskets. The sequential operation of the two baskets improves operational efficiency. Additionally, the reduction in non-operating time increases the turnover rate of the frying oil, which helps to suppress the oxidation of the frying oil.

• Steam heat exchange fryer
• Pipe burner type fryer
• Other flyers

Our company manufactures and sells a food dryer called the "Spiral Conveyor Dryer." The "Spiral Conveyor Dryer" is a device that wraps a net around a central pipe in a spiral shape and rotates it for drying. The size of the main body is determined by calculating the necessary length and area of the net required for drying. It is also possible to have two towers to allow for cooling after drying. While it is particularly suitable for drying, cooling, freezing, and transporting food, it can also be used for transporting non-food items.

• Special Dryer
• Tumble dryer
• Drying Equipment and Devices

Our company manufactures and sells the oil mist treatment device "Oil Mist Remover" for food use. The oil mist treatment device "Oil Mist Remover" sucks in oil mist and other substances into the unit and sprays high-pressure oil mist onto the walls inside the device. The emulsified foam adheres to the oil mist and removes it. The oil mist treatment device "Oil Mist Remover" is suitable for food frying factories, canning factories with unpleasant odors, painting factories with unpleasant odors, dyeing factories with chemical odors, and dust removal.

• Oil Mist Dust Collector
• Other ovens and baking machines

This product is a water-draining conveyor that naturally dries the water attached to the surface of the workpieces (non-glutinous rice, glutinous rice, corn) after washing and soaking. It uses a fine mesh net and drains water by passing through multiple stages. The drainage time is controlled by an inverter, with standard net widths of 600mm and 900mm, and the conveyor length is determined by the quality of the workpieces and processing capacity. [Model: 600 Specifications] ■External dimensions: 1100W × 12300L × 3000H ■Power: 1.0kw ■Net width: 600mm *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Other factory equipment

The product is a workpiece aligning machine that arranges solid workpieces on a belt conveyor, firing machine, and drying machine's net conveyor. After the workpieces are supplied to the supply conveyor inside the machine, defective workpieces are removed at the debris removal section equipped with a vibration motor. Subsequently, they are aligned at the gate-shaped aligning section, sucked by a rotor with a suction function, touch the obstruction plate, and are dropped onto the conveyor. 【Features】 ■ Can accommodate workpieces of different sizes and shapes by replacing the debris removal plate, gate, suction pipe, and obstruction plate. ■ Capable of adapting to changes in conveyor speed. ■ Can also respond to changes in the expansion degree of workpieces in the firing machine. ■ Incorporating this machine into the line enhances capacity. *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Other factory equipment

This product is a batch-type seasoning device that applies sauces such as salad oil, soy sauce, and syrup to workpieces (rice crackers, snacks, fried products, baked products). The supply of workpieces to the basket and the discharge from the basket are done manually, while the dipping in sauce and the shaking off of excess sauce are automated. It consists of one main tank equipped with a heater. The tank can be easily replaced, resulting in minimal switching time. 【Features】 - Semi-automatic model suitable for small-batch production of various types - Two sizes of baskets available: 20 liters and 45 liters - Applies sauces such as salad oil, soy sauce, and syrup to workpieces - Composed of one main tank equipped with a heater - Easy tank replacement *For more details, please refer to the PDF document or feel free to contact us.

• Other seasoning machines

The "15 type" is a batch seasoning device that attaches sauces such as salad oil, soy sauce, and syrup to work (rice crackers, snacks, fried products, baked products). All processes of work, including 1. supply to the basket, 2. discharge from the basket, 3. dipping in sauce, and 4. shaking off sauce, are manual. It is suitable for small-batch production of various types. The size of the basket is only 15 liters. 【Features】 ■ Batch type that attaches sauces such as salad oil, soy sauce, and syrup to work ■ All processes are manual ■ Suitable for small-batch production of various types ■ The size of the basket is only 15 liters *For more details, please refer to the PDF materials or feel free to contact us.

• Other seasoning machines

The "Model 23" is a batch-type seasoning device that applies sauces such as salad oil, soy sauce, and molasses to workpieces (rice crackers, snacks, fried products, and baked goods). To prevent damage, the start of the shaking process is a slow start. The stop is also a slow stop. It consists of a single tank mounted on the main body, which is equipped with a heater. 【Features】 - Batch-type application of sauces such as salad oil, soy sauce, and molasses to workpieces - Slow start for the shaking process - Slow stop when halting - Composed of a single tank mounted on the main body, equipped with a heater - A model that automates only the shaking of sauces, suitable for small-batch production of various types *For more details, please refer to the PDF document or feel free to contact us.

• Other seasoning machines

The "12-S/23-S type" is a round rotating drying chamber designed to reduce the moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough). It sequentially supplies the work into multiple drying baskets that can be inserted and removed from the main body of the dryer, and discharges it after an appropriate amount of time has passed. The supply and discharge of the work, as well as the supply and discharge of the drying baskets to and from the main body of the dryer, are manual. 【Features】 - Reduces moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough) - Shortens the retention time in subsequent processes - Suitable for small-batch, diverse production - Available in standard configurations of 4, 12, and 23 outlets *For more details, please refer to the PDF document or feel free to contact us.

• Other drying equipment

The "293-E type" is a round cylindrical dryer that reduces the moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough). The cylindrical body is divided into eight chambers, with an electric heater installed in the center as the heat source. There are also custom models that use an Elowin heater as the heat source or models that combine both electric heaters and Elowin heaters. 【Features】 ■ Reduces moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough) ■ Cylindrical body divided into eight chambers ■ Uses an electric heater installed in the center as the heat source *For more details, please refer to the PDF document or feel free to contact us.

• Other drying equipment

The "60/80/120/160/200/300/400 type" is a horizontal cooker that gelatinizes and pastes work materials (rice flour, mochi flour, corn flour, starch). Its main feature is the provision of a space (accumulation section) between the drum (steaming section) and the dual-axis kneading shaft (kneading section) to temporarily accumulate the work materials. The stirring shaft uses our unique crank mechanism. 【Features】 ■ Gelatinizes and pastes work materials (rice flour, mochi flour, corn flour, starch) ■ Provides a space to temporarily accumulate work materials between the drum and the dual-axis kneading shaft ■ The stirring shaft uses our unique crank mechanism ■ Structure designed to ensure uniform steaming while preventing work materials from adhering to the shaft ■ Can be combined with an automatic feeding device for automated operation *For more details, please refer to the PDF document or feel free to contact us.

• Other Steamers

The "600/900/1200 model" is a conveyor-type baking device designed for baking hard-textured materials (such as rice crackers, snacks, and shrimp crackers dough). Quality can be adjusted depending on the heating method, net specifications, and baking time. Heating can be adjusted for each middle oven (the heating section of the small process) consisting of plate-shaped infrared burners. The net is a chainless system (sprocket-driven) made of iron balance net. 【Features】 ■ Conveyor type for baking hard-textured materials ■ Enables the baking of hard-textured materials by not continuously heating ■ Quality adjustment based on heating method, net specifications, and baking time ■ Heating can be adjusted for each middle oven consisting of plate-shaped infrared burners ■ The net is a chainless system (sprocket-driven) made of iron balance net *For more details, please refer to the PDF document or feel free to contact us.

• Baking machine
• Other ovens and baking machines

The "1940 Type Extension Machine" is a molding machine that shapes workpieces (shin powder, dough) into round, triangular, square, and short lengths. The width of the extension rolls is 1940mm, making it suitable for mass production, and it connects to continuous dryers, coolers, and other equipment. The drive for the base cloth, the drive for the extension rolls, and the scrap recovery conveyor are separate, allowing for adaptability to variable factors such as processing speed, the condition of the workpiece, and the shape to be cut out. 【Features】 ■ Shapes workpieces (shin powder, dough) into round, triangular, square, and short lengths ■ The width of the extension rolls is 1940mm, suitable for mass production ■ Connects to continuous dryers, coolers, etc. ■ The standard diameter of the extension rolls is 260mm (also compatible with 160mm and 400mm) ■ Rolls with insulation devices are available to save on workpiece material *For more details, please refer to the PDF document or feel free to contact us.

• Other molding machines

The "Enki 680 model" is a molding machine that shapes workpieces (such as Shin powder and dough) into round, triangular, square, and short lengths. The workpiece is formed into a sheet using opposing 260mm rolls, and any shape can be cut using a die. The cut-out portions and scraps (the leftover parts) are separated on the underlay (on the conveyor belt). The dough (cut-out Shin powder) is transferred onto a drying mesh, and the scraps are collected. By exchanging the die, a wide variety of shapes can be molded. 【Features】 ■ Shapes workpieces (Shin powder and dough) into round, triangular, square, and short lengths ■ Forms the workpiece into a sheet using opposing 260mm rolls and cuts any shape with a die ■ Allows for a wide variety of molding by exchanging the die ■ The drive for the drying mesh conveyor belt, the underlay, and the extension rolls are separate ■ Responds to variable factors such as processing speed, workpiece condition, and the shape to be cut *For more details, please refer to the PDF document or feel free to contact us.

• Other molding machines

The "1410-S/1240-S model" is a rotating hexagonal dryer that reduces the moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough). It is equipped with eight hexagonal baskets fixed to the main body of the dryer. The works are sequentially loaded into these drying baskets and discharged after an appropriate amount of time. The heat source is an Elfin heater mounted at the bottom of the main body. 【Features】 - Reduces the moisture content of solid works (such as rice crackers, snacks, and shrimp cracker dough) - Eight hexagonal baskets fixed to the main body of the dryer - Works are sequentially loaded into the drying baskets and discharged after an appropriate amount of time - Heat source is an Elfin heater mounted at the bottom of the main body - Supply and discharge are manual (automatic supply and discharge options are available as custom products) *For more details, please refer to the PDF document or feel free to contact us.

• Other drying equipment

The "400/1000 type" is a roll-type milling machine that grinds work (washed rice, soaked rice) into powder. It is equipped with two sets of rolls made of chilled cast iron (with a speed difference set between the right roll and the left roll). High hardness rolls are adopted, and the surface is smooth. A water cooling system is standard equipment to reduce friction heat. 【Features】 ■ Roll-type machine for grinding work (washed rice, soaked rice) into powder ■ High hardness rolls are adopted ■ Smooth surface ■ Standard water cooling system to reduce friction heat ■ Roll width is standard at 1000mm, with a total of 4 rolls *For more details, please refer to the PDF document or feel free to contact us.

• Roll Crusher

The "Cooling Water Tank Conveyor" is a cooling device that allows the temperature of the cooling water in the tank to be set arbitrarily using steam. It supplies workpieces onto a slatted conveyor designed for transporting them, allowing them to pass through the cooling water for cooling. The passage time can be set arbitrarily using an inverter. Additionally, tank lengths of 6M and 10M are standard. 【Specifications】 ■ Model 6000 - External dimensions: 1500W × 7788L × 3000H - Power: 0.75KW - Conveyor length: 7550mm ■ Model 10000 - External dimensions: 1500W × 11788L × 3000H - Power: 0.75KW - Conveyor length: 11550mm *For more details, please download the PDF or feel free to contact us.

• Cooling Equipment

The "Fully Automatic Seasoning Machine with Slide Type" is a batch-type seasoning device that applies sauces such as salad oil, soy sauce, and syrup to workpieces (rice crackers, snacks, fried products, and baked goods). It automatically performs a series of seasoning processes: 1. supplying workpieces to the basket, 2. moving the basket, 3. dipping in the sauce, 4. shaking off the sauce, 5. moving the basket, and 6. discharging from the basket. The processes 2 and 5, which are filled with workpieces, move in a straight line, allowing for large-scale processing. Additionally, to ensure uniform seasoning, it features two tanks: a main tank and a sub-tank, with sauce circulating between both tanks. Each tank is equipped with a heater. *For more details, please download the PDF or feel free to contact us.*

• Other seasoning machines

The "Steaming and Kneading Machine" is a horizontal cooker that α-gelatinizes and gelatinizes work materials (rice flour, mochi flour, corn flour, starch). A suitable amount of work and water is supplied into a cylindrical drum. After supply, steam is introduced, and mixing occurs. The mixing shaft employs our unique crank mechanism. The mixing shaft, which is mounted horizontally inside the drum, is not linear but crank-shaped, ensuring uniform steaming while preventing work materials (shin flour, mochi, dough) from adhering to the shaft. The steamed work materials (shin flour, mochi, dough) fall onto a dual-axis kneading shaft when the shutter at the bottom of the drum opens, and are discharged outside the machine. *For more details, please download the PDF or feel free to contact us.

• Steaming machine

The "W Kneading Machine" is a kneading device designed to finely break down air bubbles contained in the work (such as powder, mochi, or dough), achieve uniform temperature, ensure consistent moisture levels, and mix auxiliary materials. The work is fed from the hopper and is pushed out of the machine by a dual-axis shaft equipped with spirals and cutting blades. The degree of kneading is determined by the temperature of the work, the length of the shaft, the number and angle of the cutting blades attached to the shaft, and the opening degree of the outlet. The supply amount to the subsequent process is controlled by the rotation speed of the dual-axis shaft and the opening height of the outlet. *For more details, please download the PDF or feel free to contact us.*

• Kneading Machine
• Other mixing and mixing equipment

The "8-Roll Crusher" is a roll-type milling machine that grinds work (washed rice, soaked rice) into powder. It is equipped with four pairs of opposing rolls made of chill cast iron (with a speed difference set between the right and left rolls). For this reason, high hardness rolls are used, and the surface is smooth. 【Features】 ■ The material passes through the opposing rolls four times, being ground into powder due to the speed difference between the rolls. ■ Standard water cooling system to reduce friction heat. ■ Custom sizes available in 400mm and 600mm widths. *For more details, please download the PDF or feel free to contact us.

• Roll Crusher