ラプラス Product Lineup

● This is a wire stripper from the Swiss traditional brand "Erem." ● A sturdy and robust high-precision tool for use in electronics and aerospace engineering. ● The required diameter can be set by a screw. ● Unique precision for stripping fine wires without damage. ● No limitation on stripping length due to side stripping. ● Suitable for easy and accurate stripping of optical fibers. ● Non-reflective surface.

• Pliers, Nippers

● This is a cutter from the Swiss traditional brand "Erem." ● It has the narrowest head among Erem products. ● The bottom surface is relieved, making it easy to access very tight spaces that are hard to reach. ● The cutting edge is finer than that of a typical cutter. ● The load during cutting is reduced, which also lessens the stress on the components. ● The ends of the flush wire can be smoothly inserted into the through holes of printed circuit boards without being crushed or bulging.

• Cutter/Scissors
• Pliers, Nippers

● This is a cutter from the Swiss traditional brand "Erem." ● It is extremely sturdy and demonstrates the best cutting ability. ● It is ideal for situations where a flatter cutting surface is required, as if cut with a razor blade. It is used in applications such as microelectronics, space travel, and medical technology, and is also suitable for soft wires.

• Pliers, Nippers
• Cutter/Scissors

● This is a cutter from the Swiss traditional brand "Erem." ● The ultra-precision blade with the smallest ultra-fine head is shaped for very difficult-to-reach access. ● It is ideal for situations where a flatter cutting surface is required, as if cut with a razor blade. It is used in applications such as microelectronics, space travel, and medical technology, and is also suitable for soft wires.

• Pliers, Nippers
• Cutter/Scissors

● This is a cutter from the Swiss traditional brand "Erem." ● The cutting edge is finer than that of a typical cutter. ● It reduces the load during cutting, which also lessens the stress on the components. ● The ends of the flash wire can be smoothly inserted into the through holes of printed circuit boards without being crushed or swollen. ● The ultra-fine head features the smallest ultra-precision blade, making it suitable for use in very tight spaces that are hard to reach.

• Cutter/Scissors
• Pliers, Nippers

●The definitive version of soldering work in the IoT era ●A set that includes a controller, soldering iron, tips, and a stand 【Features】 ●Simultaneous operation of two soldering irons ●Innovative operational concept with a robust touchscreen using ESD protective glass ●Intuitive operation performance with a turn-click wheel featuring an Enter key and finger guide ●User-friendly interface ⇒Multilingual menu guide: Japanese, German, English, French, Italian, Spanish, Portuguese, Chinese. Other languages can be implemented upon request. ●Built-in accelerometer eliminates the need for a safety rest with stop & go functionality

• Soldering Equipment

【Features】 ● 200W, 24V ● Parameter memory for temperature standby and automatic switch-off function ● Significant energy savings achieved with built-in motion sensor ● Visual process control through LED signal function ● Low cost, interchangeable with XHT soldering tips ● Power response heater technology with improved sensors

• Soldering Equipment

● Chip activator ● Set the tip to 300°C and use

• Solder

【Features】 ● 120W, 24V ● 120-watt WX all-around specification ● Parameter memory for temperature standby and automatic switch-off function ● Built-in motion sensor for significant energy savings ● Visual process control with LED signal function ● Low-cost, replaceable XT series soldering tips ● Power response heater technology with improved sensors

• Soldering Equipment

**Features** ● Micro soldering iron 40W, 12V ● Ideal for fine work with high heat draw ● For WX station ● Parameter memory for temperature standby and automatic switch-off function ● Built-in motion sensor for significant energy savings ● RT tips are easily replaceable! ● Active tip system allows for tip replacement while hot. ● Maximum power consumption: 55W

• Soldering Equipment

**Features** - External supply air ⇒ Generates a constant vacuum using a maintenance-free venturi valve unit. Designed for external compressed air supply. - No troublesome cleaning tasks ⇒ The newly extended nozzle shaft prevents the suction tube from sticking. The suction channel has also been replaced, making the previously tedious and time-consuming tool cleaning tasks a thing of the past. - Easy replacement ⇒ Thanks to smart design, the suction nozzle and solder cartridge can be quickly and easily replaced without the risk of burns or complications. - Significant cost reduction possible ⇒ A relatively low operating temperature (380°C) and an automatic standby mode controlled by the used sensor extend the lifespan of the suction nozzle by three times. - Vacuum operation ⇒ You can set the vacuum operation time to prevent clogging of the suction pump. - Two types of models available ⇒ WXDP 120 is designed for horizontal work, while WXDV 120 is designed for vertical work. - Compatible with WX series soldering and desoldering tools. - External compressed air connection. - Energy-saving: Equipped with standby mode. - Patented ESD-safe glass display. Allows for easy and quick parameter settings.

• Solder

● Comes with four types of nozzles for different purposes. *For more details, please feel free to contact us.

• Heating device

● 1-channel soldering station ● Stackable unit, saves workbench space ● 2-in-1 WSR safety rest, flips between sponge and brass wool ● Compatible with a wide range of soldering pencils, preheating plates, and solder pots ● Off time, process window, lock function, offset 【Set contents】 Controller WT1 Soldering iron WTP90 Soldering iron stand WSR200 Soldering tip XNT A

• Soldering Equipment

●The successor model to the WD1000! It has become more multifunctional, smaller, and designed for ease of use! ●The only consumable part is the soldering tip, contributing to the reduction of unnecessary resources. 【Set Contents】 Controller: WT1 Soldering Iron: WSP80 Soldering Stand: WSR201 Soldering Tip: LT B

• Soldering Equipment

● A serious mini vice developed by professionals in precision vice manufacturing for hobby use. ● Convenient for holding and fixing small workpieces, as well as for soldering and gluing! ● Equipped with a magnet at the bottom for secure fixing. Improves work efficiency! ● Available in aluminum and plastic types. Choose according to your needs. *Please feel free to contact us for more details.*

• Vice Clamps

● A serious mini vice developed by professionals in precision vice manufacturing for hobby use. ● Convenient for holding and fixing small workpieces, as well as for soldering and gluing! ● Equipped with a magnet at the bottom for secure fixing. Improves work efficiency! ● Available in aluminum and resin types. Choose according to your needs. *Please feel free to contact us for more details.*

• Vice Clamps

The "BL60JP" from Weller, one of the world's leading soldering equipment brands. Our company offers the cordless rechargeable soldering iron "BL60JP," which utilizes a high-performance lithium-ion battery, allowing for 45 minutes of continuous use or up to 1100 soldering points. It features easy one-touch tip replacement. The round body design reduces fatigue, and the user-friendly on/off switch is a highlight. Additionally, the LED light enables precise work even in dark environments, ensuring safe and reliable soldering operations. 【Features】 ■ Long-lasting battery ■ Ergonomic design ■ Safety design ■ Heat cycle ■ LED illumination *Please feel free to contact us for more details.

• Soldering Equipment