セキュリティハウス List of Products and Services

■Features When a magnetic switch is installed on a magnetic material such as an iron door, the set distance becomes shorter due to the characteristics of the product. By using this spacer to install it away from the magnetic material, the set distance is improved.

• Other security and surveillance systems

■Features When a magnetic switch is installed on a magnetic material such as an iron door, the set distance is reduced due to the characteristics of the product. By using this spacer to install it away from the magnetic material, the set distance is improved.

• Other security and surveillance systems

■Features ● The magnet switch is slim (2mm), making it suitable for cross doors. ● Double-sided tape is attached to the magnet part for installation assistance. ● The operating distance is less than 15mm. ● Available in four colors: Gray (G), Brown (B), Black (BL), and White (W), allowing selection based on the design of the installation location. ● Loop checks can be easily performed through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet switch is slim (2mm), making it suitable for cross doors. ● Double-sided tape is attached to the magnet part for installation assistance. ● The operating distance is less than 15mm. ● Available in four colors: Gray (G), Brown (B), Black (BL), and White (W), allowing selection based on the design of the installation location. ● Easy loop checking can be done through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet switch is slim (2mm), making it suitable for cross doors. ● Double-sided tape is applied to the magnet part for installation assistance. ● The operating distance is less than 15mm. ● Available in four colors: Gray (G), Brown (B), Black (BL), and White (W), allowing you to choose based on the design of the installation location. ● Easy loop checking can be done through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet switch is slim (2mm), making it suitable for cross doors. ● Double-sided tape is attached to the magnet part for installation assistance. ● The operating distance is less than 15mm. ● Available in four colors: Gray (G), Brown (B), Black (BL), and White (W), allowing selection based on the design of the installation location. ● Easy loop checking can be done through the tester hole in the switch cover. ● No stopper is required. *When installed on ferromagnetic materials like iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet part is thin (2mm), allowing it to be used on cross doors. ● It has strong magnetic force and a long operating distance (operating distance of 20mm or less). ● It can be easily installed with the included mounting screws. ● Available in brown and gray, allowing color selection based on the design of the installation location. ● Loop checks can be easily performed using the tester hole on the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet part is slim (2mm), allowing it to be used on cross doors. ● It has strong magnetic force and a long operating distance (operating distance of 20mm or less). ● It can be easily installed with the included mounting screws. ● Available in white and brown, allowing you to choose a color that matches the design of the installation location. ● Loop checks can be easily performed through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● The magnet part is thin (2mm), allowing it to be used on cross doors. ● It has strong magnetic force and a long operating distance (operating distance of 20mm or less). ● It can be easily installed with the included mounting screws. ● Available in white and gray, allowing you to choose a color that matches the design of the installation location. ● Loop checks can be easily performed through the tester hole in the switch cover. ● No stopper is required. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ●Wiring is as simple as inserting the wire into the wiring port on the side of the main unit and tightening the terminal screws; loop checks can also be easily performed with the terminal screws. ●Includes spacers to eliminate the misalignment (step) between the switch and magnet parts, as well as a stopper to protect the magnet part when the window is opened, and mounting screws. ●Available in two colors, gray and brown, to suit the installation location. ●There is also a set that includes only the magnet and switch parts (MG-104). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use spacers or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ●Wiring is simply done by inserting the wire into the wiring port on the side of the main unit and tightening the terminal screws; loop checks can also be easily performed with the terminal screws. ●Includes a spacer to eliminate the offset (step) between the switch part and the magnet part, a stopper to protect the magnet part when the window is opened, and mounting screws. ●Available in two colors, gray and brown, to suit the installation location. ●There is also a set that includes only the magnet part and the switch part (MG-104). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in gray and brown, allowing color selection based on installation location. ● Spacers and stoppers are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use spacers or similar items to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop check can be performed with the tester hole on the switch cover. ● Available in other colors such as brown and white, allowing you to choose based on the installation location. ● Spacer and stopper are sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop checking with the tester hole on the switch cover. ● Available in gray and white, allowing color selection based on installation location. ● Spacer and stopper sold separately. *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop checking with the tester hole on the switch cover. ● Includes a spacer to eliminate misalignment (step) between the switch and magnet parts, a stopper to protect the magnet part when the window is opened, and mounting screws. ● Available in gray and brown, allowing color selection based on installation location. ● There is also a set that includes only the magnet and switch parts (MG-103). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop checking with the tester hole on the switch cover. ● Includes a spacer to eliminate misalignment (step) between the switch and magnet parts, a stopper to protect the magnet part when the window is opened, and mounting screws. ● Available in other colors such as brown and white, allowing color selection based on installation location. ● There is also a set that includes only the magnet and switch parts (MG-103). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In that case, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Features ● Easy loop checking with the tester hole on the switch cover. ● Includes a spacer to eliminate misalignment (step) between the switch and magnet parts, a stopper to protect the magnet part when the window is opened, and mounting screws. ● Available in gray and white, allowing color selection based on installation location. ● There is also a set that includes only the magnet and switch parts (MG-103). *When installed on magnetic materials such as iron doors, the set distance will be shorter due to the product's characteristics. In such cases, please use a spacer or similar to install it away from the magnetic material to ensure the set distance.

• Other security and surveillance systems

■Alarm Memory Function When the sensor is triggered, the memory indicator will blink for 3 minutes and then remain lit for 47 minutes due to the built-in timer, allowing you to easily identify the triggered sensor even when multiple sensors are connected to the same line. ■Cancellation of External Magnetic Field Influence Equipped with an adjustment function that cancels various external magnetic influences. It reliably detects forced entry and destruction of shutters. ■Completely Unaffected by External Environmental Influences Since it uses magnetic modulation, it is not affected at all by small animals like spiders and moths, dust and dirt, condensation, freezing, or stray light. It can be used safely in cold or hot and humid environments. ■Cuts Out Radio and Electrical Noise Influence Thanks to unique circuit and mechanical designs, it has a high level of noise resistance. ■Adoption of Special Magnet Sheet No need to worry about changes in magnetic force over time or detachment from the shutter slat. It uses a special sheet with high magnetic retention, excellent weather resistance, and flexibility to adhere to curved surfaces. ■Installation Adaptable to the Site With the built-in arm, you can freely adjust the distance and height between the sensor and the magnet sheet.

• Other security and surveillance systems

■Alarm Memory Function When the sensor is triggered, the memory indicator will blink for 3 minutes and then remain lit for 47 minutes due to the built-in timer, allowing you to easily identify which sensor has been activated even if multiple sensors are connected to the same line. ■Highly Reliable Double Beam System Our unique double beam system significantly reduces the effects of shutter rattling, small animals like insects, and reflected light from the shutter surface. It reliably detects forced entry and destruction of the shutter. ■Operation Indicator Output Point With the operation indicator output point, you can confirm the sensor's operation from outside when the sensor is installed inside the shutter roll-up case. ■Cuts Out Radio and Electrical Noise Thanks to our unique circuit and mechanical design, we provide high-level noise resistance. ■Flexible Installation According to the Site The built-in arm allows for easy adjustment of the distance and height between the sensor and the reflective sheet. ■Sensitivity Indicator Light If the sensitivity decreases to a certain level due to dirt on the sensor front or reflective sheet, the sensitivity indicator light will turn on to alert you for maintenance.

• Other security and surveillance systems

■Proven High Reliability Detection Performance It captures only the specific vibration frequency generated when glass is broken, thanks to the piezoelectric element and filter amplifier, and does not respond to vibrations or impacts from wind or vehicles. ■Voltage-Free Relay Contact Output Being a voltage-free relay contact output type, there is no need for cumbersome external controllers or relays. Additionally, it is possible to connect other sensors (b contacts) to the same circuit. (The contact operation is a one-shot of approximately 2 seconds.) ■Two Types of Lead Wires Two types are available: a straight cord (GS-02, lead wire 50cm) and a coiled cord (GS-02C, lead wire 18.5cm, fully extended 130cm), allowing for flexible usage as needed. ■Simple Design With a diameter of 37mm and a thickness of 15mm, it features a compact and simple design, adopting a calm gray color that does not create a sense of incongruity regardless of where it is installed. ■One-Touch Memory Reset Function Memory reset is possible simply by short-circuiting the reset terminal on the front of the sensor with a conductive object, without operating the power switch. (Resetting can also be done by operating the power switch.)

• Other security and surveillance systems

■Proven High Reliability Detection Performance It captures only the specific vibration frequency generated when glass is broken, thanks to the piezoelectric element and filter amplifier, and does not respond to vibrations or impacts from wind or vehicles. ■Voltage-Free Relay Contact Output As it is a voltage-free relay contact output type, there is no need for cumbersome external controllers or relays. Additionally, it is possible to connect other sensors (b contacts) to the same circuit. (Contact operation is one-shot for about 2 seconds.) ■Two Types of Lead Wires Two types are available: straight cable (GS-02, lead wire 50cm) and coiled cable (GS-02C, lead wire 18.5cm, fully extended 130cm), allowing for flexible usage as needed. ■Simple Design With a diameter of 37mm and a thickness of 15mm, it features a compact and simple design, adopting a calm gray color that does not create a sense of incongruity wherever it is installed. ■One-Touch Memory Reset Function Memory reset is possible simply by short-circuiting the reset terminal on the front of the sensor with a conductive object, without operating the power switch. (Resetting can also be done by operating the power switch.)

• Other security and surveillance systems

■Surely Captures Glass Breaking Sounds It sharply picks up the unique ultrasonic sounds generated during glass breakage and accurately processes the signals according to frequency and sound pressure. It shuts out external noise. ■Environmental Check Function Equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy to Install and Location Flexible With a vertical detection range of 7m and a horizontal range of 8m, as well as a wide variable range of 80°, it can be easily installed on walls. Additionally, it is a non-contact type that can monitor multiple glass panels with one unit, allowing for easy installation and maintenance without compromising aesthetics. ■Alarm Memory Function When glass breaking sounds are detected, the alarm indicator light (red LED) will blink for about 3 minutes and then remain lit for 47 minutes, making it easy to identify the location of the alarm even when multiple units are installed. ■Convenient Features and User-Friendly Design ● It comes with a sensitivity adjustment volume that can be set to the optimal sensitivity. ● A glass checker for simulation: EG-2000 (optional) is also available. ● It can be powered by a wide voltage range (DC9V to 30V). ● Compact body and smart design that do not compromise the interior of the installation location.

• Other security and surveillance systems

■Surely Captures Glass Breaking Sounds It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure. It shuts out external noise. ■Environmental Check Function Equipped with a mode switch and indicator light for easy environmental checks of the installation location and confirmation of operation. ■Easy to Install and Location Flexible The security area can be adjusted with a maximum vertical range of 8m and a horizontal range of 7m, with a wide variable range of 45°, allowing for easy installation on walls. Additionally, it is a non-contact type that can monitor multiple glass panels with one unit, making installation and maintenance easy without compromising aesthetics. ■Alarm Memory Function When glass breaking sounds are detected, the alarm indicator light (red LED) continues to illuminate for about 60 minutes, making it easy to identify the location of the alarm even if multiple units are installed. ■Convenient Features and User-Friendly Design ● It comes with a sensitivity adjustment volume that can be set to the optimal sensitivity. ● A glass checker for simulation: EG-2000 (optional) is also available. ● It can be powered by a wide voltage range (DC10.5V to 30V). ● Compact body and smart design that does not compromise the interior of the installation location.

• Other security and surveillance systems

■Features This is an ultrasonic sensor that detects the unique ultrasonic waves generated when plate glass, such as windows, is broken, and outputs an alarm signal. It is specifically designed for unmanned surveillance. ■Reliable Glass Break Detection It sharply picks up the unique ultrasonic waves generated during glass breakage and accurately processes the signals according to frequency and sound pressure. It shuts out external noise. ■Environmental Check Function It is equipped with a mode switch and indicator light that make it easy to check the installation environment and confirm operation. ■Easy Installation and Versatile Placement ● The surveillance area can be adjusted, with a maximum vertical range of 8m and a horizontal range of up to 7m, and a wide variable range of 30°, allowing for easy installation on ceilings. Additionally, being a non-contact type, it can monitor multiple pieces of plate glass without compromising aesthetics, making installation and maintenance easy. ● As it is passive, multiple units can be installed in the same space. ● Its slim shape allows it to be installed in narrow spaces between windows and curtains or blinds.

• Other security and surveillance systems

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, ensuring high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No application process for radio station license required This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" as permitted by domestic radio laws, so no application or procedures for a radio station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ● Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ● External environment diagnostic function If the infrared light reception amount falls below a certain level due to adverse weather conditions (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

• Other security and surveillance systems

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type There are two models with different frequencies in the microwave section: "L" type and "H" type. The infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed along a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio laws, so no application or procedures for a wireless station license are required on the customer's side. *The first domestic security-oriented opposing microwave sensor. ■Intelligent features ● Four-stage modulation frequency switching This feature is effective when multiple sensors are used for linear surveillance or multi-stage monitoring. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ● External environment diagnostic function If the infrared light reception amount falls below a certain level due to bad weather (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

• Other security and surveillance systems

■High-reliability composite sensor This is a composite sensor that integrates a 4-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, wireless equipment for mobile detection sensors" permitted by domestic radio laws, so no application or procedures for a wireless station license are required on the customer's side. *The first domestic security-oriented opposing microwave sensor ■Intelligent features ●Four-stage modulation frequency switching This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ●External environment diagnostic function If the infrared light reception amount falls below a certain level due to bad weather (dense fog, heavy snowfall), an environmental deterioration signal will be output.

• Other security and surveillance systems

■High-reliability composite sensor This is a composite sensor that integrates a four-beam infrared sensor and a 24GHz microwave sensor, achieving high reliability even in bad weather conditions. ■Two models: "L" type and "H" type The microwave section has two models, "L" type and "H" type, and the infrared section can switch between four modulation frequencies via a switch, preventing mutual interference when multiple units are installed in a straight line. ■No need for wireless station license application This product falls under the category of "specific low-power radio stations, mobile detection sensor radio equipment" permitted by domestic radio laws, so no application or procedures for a wireless station license are required from the customer. *The first domestic security-oriented opposing microwave sensor. ■Intelligent functions ● Four-stage modulation frequency switching: This feature is effective when conducting linear surveillance with multiple sensors or during multi-stage surveillance. By switching the frequency of the infrared pulse beam, mutual interference can be easily avoided. ● External environment diagnostic function: If the infrared light reception amount falls below a certain level due to adverse weather conditions (such as dense fog or heavy snowfall), an environmental deterioration signal will be output.

• Other security and surveillance systems

Strong against harsh environments (Composite sensor) This composite type integrates a two-stage beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse environmental conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, wireless equipment for mobile detection sensors," so no application for a radio station license or any procedures are required on the customer's side. Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. Therefore, mutual interference can be prevented when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch.

• Other security and surveillance systems

■Strong against harsh environments (Composite sensor) The composite type integrates a two-stage beam infrared sensor and a 24GHz microwave sensor, reducing malfunctions during adverse conditions such as fog, snow, and heavy rain. *The 24GHz microwave sensor complies with the domestic radio law as a "specific low-power radio station, radio equipment for mobile detection sensors," so no application for a radio station license or any other procedures are required on the customer's side. ■Strong against lightning (Enhanced lightning protection) Surge resistance has been strengthened to reduce damage from induced lightning. *This does not guarantee protection against failures or malfunctions caused by lightning strikes. ■Two models: "L" type and "H" type The microwave section has two frequency types: "L" type and "H" type. This prevents mutual interference when multiple units are installed directly on the line. *The infrared section can switch between four modulation frequencies using the function setting switch. ■Strong against stray light (Dual modulation method) By adopting our unique dual modulation method in the infrared sensor, we enhance the ability to distinguish between stray light (such as sunlight and car headlights).

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the entire frame on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material mainly consists of galvanized and painted steel plates, with stainless steel used for bolts. ■ Customizable vigilance network Infrared sensors of single beam type, double beam type, and four-stage beam type can be used, allowing for linear and loop vigilance. Additionally, the height of the sensor installation can be adjusted, enabling the optimal configuration of the vigilance network according to the installation location. ■ Capable of accommodating specifications beyond standard By modularizing the internal structure of the housing, it is designed to also accommodate microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series

• Other security and surveillance systems

■ Discreet vigilance is possible By adopting invisible colored acrylic pipes inside and placing the frame entirely on the inside, the installation position and direction of the sensors are not discernible. ■ Strong design with excellent durability It is resistant to impact and has outstanding durability, allowing for long-term use. The material primarily consists of steel plates with plating and painting, while bolts are made of stainless steel. ■ Flexible setting of the vigilance network Single beam, double beam, and four-stage beam infrared sensors can be used, allowing for linear and loop vigilance. Additionally, the height of the sensor installation can be adjusted, enabling optimal vigilance network settings tailored to the installation location. ■ Customization beyond standard specifications By modularizing the internal structure of the housing, it is designed to accommodate the storage of microwave sensors, solar cell units, and more. ■ Compatible models - PXB-HF-KH series - PXB-HFA series - PXB-F series - PXB-TE series - PXB-100SW - BUS-XF series - BUS-XT series - PB-IN-HF series - PB-FZ series - PB-IN-100AT

• Other security and surveillance systems

■Smart and Highly Practical Design With its excellent aesthetics and high practicality, it matches anywhere without being limited by the installation location (installation locations include companies, factories, energy facilities, educational and cultural facilities, shrines, temples, residences, etc.). ■Discreet Surveillance Possible The sensor is completely housed, and it uses colored acrylic pipes that are not visible from the outside. ■Robust Design with Outstanding Durability It is resistant to impact and has excellent durability, allowing for long-term use. The main material is synthetic resin, and all bolts and screws are made of stainless steel to enhance durability. ■Flexible Surveillance Network Settings Single beam, double beam, and four-stage beam infrared sensors can be used, allowing for linear and loop surveillance, enabling flexible configuration of the surveillance network. ■Compatible Models - PXB-HF-KH Series - PXB-HFA Series - PXB-F Series - PXB-100SW - PXB-TE Series - BUS-XF Series - BUS-XT Series - PB-FZ Series - PB-IN-HF Series - PB-IN-100AT

• Other security and surveillance systems

■Compact Housing Type This is a compact housing type that is easy to install, allowing for simple attachment and excellent design aesthetics. ■Outstanding Security Due to its structure that conceals the interior, the position of the sensor's warning line and the types of sensors installed cannot be identified, providing excellent security. ■Easy Installation Installation is straightforward as it simply involves covering the pole (specific to KP-100/100B), making setup easy. ■Retrofit Installation on Existing Poles It is easy to retrofit onto existing pole installations. Additionally, it supports back-to-back installation of sensors. *For new installations, a pole is required. Beam direction: within 140°. ■Compatible Models - PXB-HFA series - PXB-F series - PXB-100SW - PXB-TE series - PB-TE series - PB-FZ series - PB-F series - PB-IN-HF series - PB-IN-100AT - BUS-XF series - BUS-XT series *Please use the included lock spacer when installing the sensor.

• Other security and surveillance systems

■Solar Power Compatible By supplying power from a separately sold solar power unit, it can be installed and operated in locations without a power source. This allows for the introduction of infrared sensors at gates in public parking lots without the need for wiring work. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ■Strong Against Harsh Environments (4-Stage High Power Beam) By employing a 4-stage high power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse weather conditions such as fog, snow, and heavy rain. Expanded Optical Axis Angle Adjustment In addition to ±90° in the horizontal direction, it achieves ±20° in the vertical direction. This allows for flexible installation on slopes. <Reference> Within an elevation difference of 18m at 50m Within an elevation difference of 36m at 100m Within an elevation difference of 72m at 200m Dustproof and Splash-Proof Structure (IP65) By improving the insect-proof bushing that envelops the electric wires and the dedicated packing, we have achieved IP65 (equivalent to IP67).

• Other security and surveillance systems

■Solar Power Compatible By combining the floodlight with a separately sold solar power unit, it can be used with single-sided wiring only on the receiver side, even in locations where dual-sided wiring is difficult. Additionally, by adding a solar power unit and a contact input unit to the receiver side, it can support full wireless operation. Therefore, it is possible to maintain surveillance up to 100 meters even in locations where wiring work is challenging. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, surge resistance performance has been strengthened. *This does not guarantee against failures or malfunctions caused by lightning strikes. ■Structure Preventing Insects (Insect and Drip Proof Design) Using insect-proof bushings that wrap around the wires and dedicated gaskets, it achieves dustproof, drip-proof, and insect-proof measures equivalent to IP65. The insect-proof bushing can be cut to match the size of the wire, preventing the entry of insects and water from the wire entry point and protecting the circuit board from corrosion. ■Strong Against Ambient Light (Dual Modulation Method) By adopting our unique dual modulation method for the infrared beam, it enhances the ability to distinguish between ambient light (such as sunlight and car headlights) and ensures reliable outdoor surveillance.

• Other security and surveillance systems

■Housing Storage Type This is a dedicated product for housing cases, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the distinguishability from stray light (such as sunlight and car headlights), achieving reliable outdoor surveillance. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustment. It provides an appropriate view when the eye is brought close or moved away. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. It has approximately 10 times the surge resistance compared to the conventional PB-IN-HF series, allowing for safe use. (Compared to our previous models)

• Other security and surveillance systems

■Housing Storage Type This is a dedicated product for housing cases, so it can be directly mounted onto the case. *Installing it directly outdoors may cause malfunctions. ■Significantly Reduced Malfunctions (Dual Modulation Method, Wide Pitch) By adopting our unique dual modulation method for the infrared beam, we enhance the ability to distinguish between ambient light (such as sunlight and car headlights) and achieve reliable outdoor monitoring. (It is not affected by changes in illumination of up to 50,000 lux.) Additionally, by widening the beam pitch compared to the conventional PB-F/HF series, we significantly reduce malfunctions caused by small animals like birds, resulting in even more stable operation. ■Easy-to-See Aiming Mechanism (Double Ring Aiming Mechanism) [Patent] The aiming device employs a double ring to improve visibility during optical axis adjustments. It provides appropriate visibility when the eye is brought close or moved away. ■Strong Against Lightning (Enhanced Lightning Protection) To reduce damage from induced lightning, we have strengthened the surge resistance performance. It has approximately 10 times the surge resistance compared to the conventional PB-IN-HF series, allowing for safe use. (Compared to our previous models)

• Other security and surveillance systems

■Strong against ambient light (Dual modulation method) By adopting our unique dual modulation method for infrared beams, we enhance the distinguishability from ambient light (such as sunlight and car headlights), achieving highly reliable outdoor surveillance. ■Strong against harsh environments (4-stage high-power beam) By employing a 4-stage high-power beam with 100 times sensitivity margin and 10 times distance margin, we reduce false triggers during adverse weather conditions such as fog, snow, and heavy rain. ■Energy-efficient design We have significantly reduced power consumption (to less than 50% of our previous models). This allows for the use of smaller power supplies compared to before, eliminating the need for thick wiring even over long distances, thereby greatly reducing wiring material costs. ■Green design We comply with the RoHS directive, which considers environmental impact. (We eliminate lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, and polybrominated diphenyl ethers.) (RoHS: A directive established by EU member states that restricts the use of specific hazardous substances in electrical and electronic equipment.) ■Dustproof and splash-proof structure (IP65) Through improvements in insect-proof bushings and dedicated gaskets that envelop the wiring, we have achieved an IP65 rating (equivalent to IP67).

• Other security and surveillance systems

■Simultaneous Two-Stage Beam Interruption Method By adopting an AND method that does not trigger an alarm unless both upper and lower infrared beams are interrupted simultaneously, false alarms caused by momentary interruptions with time delays, such as birds flying in or leaves falling, are significantly reduced. ■Modulation Frequency Switching Function This feature is effective when using multiple infrared sensors for linear surveillance or multi-stage monitoring. By switching the modulation frequency of the infrared pulse beam between high and low, it is possible to avoid bypassing. ■Home Security It can also be used for home security applications such as windows and fence boundaries, as well as for simpler specifications. ■Wide Beam Pitch The beam pitch is set to approximately 240mm, which greatly reduces false alarms caused by birds or falling leaves. ■Detection Response Time Adjustment The detection response speed can be adjusted with a volume control from 0.05 to 0.7 seconds. By setting a longer detection response time, it becomes less likely to trigger false alarms from falling leaves. However, be cautious as setting it too slow may result in failing to detect humans. ■Others ● The detection range is 15m outdoors and 30m indoors. ● Horizontal adjustment of the infrared light axis is possible (vertical adjustment is not). ● Wide light beam allows for easy axis adjustment.

• Other security and surveillance systems

■External Environment Diagnosis Function By connecting the optional S.E.C circuit board (sold separately) to the receiver, environmental conditions can be checked separately from intrusion alerts. If the infrared light reception falls below a certain level due to bad weather, it will notify the receiving unit of the environmental deterioration. ■Malfunction Prevention Circuit A full safety system that mitigates the effects of heat haze, atmospheric fluctuations, temperature changes, and lighting ensures safe operation at all times. ■Powerful Beam Essential for Outdoor Security To accommodate attenuation from external light and adverse weather conditions such as rain, snow, and fog, the distance margin is set to more than ten times the warning distance. ■Easy and Reliable Optical Axis Adjustment With the built-in aiming device and the included sensitivity checker, optical axis adjustment can be performed easily and reliably. (The PH-600SE is equipped with a rifle scope to enhance adjustment accuracy.) Additionally, it features a monitor jack for checking sensitivity levels with the optional (sold separately) level checker "EL-01." ■Outstanding Durability and Environmental Resistance The double drip-proof structure and stainless steel plate provide exceptional durability and environmental resistance. ■Flexible Security Network Setup By synchronizing infrared signals, mutual interference is eliminated, allowing for a flexible security network setup.

• Other security and surveillance systems