バンザイ Product Lineup

This is a device that allows the drive axle without speed detection to spin freely during speed measurement of a full-time 4WD vehicle. It needs to be installed according to the target wheelbase. The effective measurement lengths are 1500 mm for the standard version and 1000 mm for the short version. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Eminent Alpha IV" is a gantry car wash machine that enhances cleaning and drying power while reducing wash time, achieving more efficient car washing. In addition to the "B-PRO Foam Mode," which makes it easier to remove stubborn dirt, it features a "Iron Powder Removal Mode" designed specifically for iron powder removal agents, allowing for efficient price increases. It achieves a water usage of 43L per unit and a washing speed of 82 seconds, and the frame is made of a "Fortress Frame" that has high rust resistance. 【Features】 ■ Achieves efficient car washing ■ Equipped with NEW coating ■ Offers a wide range of options ■ Improved cleaning performance: Equipped with B-PRO Foam Mode and Iron Powder Removal Mode ■ Customized to company specifications: Car wash support tailored to customer needs *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The "Laundry Series" is an auto parts washer that can clean everything from small components to large vehicle parts. Dirt on parts is eliminated with our proud high-power jet spray. Additionally, there is no need to worry about corrosion or rust even after long-term use. We can also manufacture a big type suitable for cleaning V-type 12-cylinder engine blocks and marine engines, so please feel free to consult us. 【Features】 ■ Equipped with a top runner motor ■ Powerful cleaning with a high-power pump ■ Thorough washing from small to large items ■ Clean with a strong detergent ■ Waste liquid is forcibly discharged by a pump ■ Stainless steel body eliminates worries about rust *For more details, please refer to the PDF materials or feel free to contact us.

• Other cleaning machines

The "Eagle Advance Lift" is an arm lift designed with a symmetrical structure, allowing the vehicle to be lifted in a forward or backward direction for easy operation. With a pantograph structure and a machine thickness of 580mm, this arm lift can be used in multi-story settings. It accommodates a wide range of vehicle types and is easy to set up. When lifted, there is sufficient distance between the lift arms, making it easy to perform work underneath the vehicle, such as heavy maintenance. Additionally, it prevents the casters from slipping off, ensuring safe operation. 【Features】 ■ Dimmable LED lighting standard equipment ■ Three-stage sliding arms ■ Symmetrical design allows lifting from either the front or back ■ Compact installation possible ■ Flat and comfortable space at the feet *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog introduces our lineup of lift attachments. It features the "G Series," including the High-Quick Coupler (GQH101) and the Flanged Track Coupler (KNR107), as well as the "F Series," which includes the Concave Coupler (FQL102) and the A-Type Coupler (FQH109). Additionally, we provide examples of use, lift conversion adapter options, a quick reference chart for coupler compatibility, and related products. Please use this information to assist in selecting products. [Contents] ■ G Series ■ F Series ■ Examples of Use ■ Lift Conversion Adapter Options ■ Coupler Compatibility Quick Reference Chart ■ Related Products *For more details, please refer to the PDF document or feel free to contact us.

• lift
• Other machine elements

This is a tester that measures the noise of automobiles and the volume of sirens. It requires certification by the Japan Quality Assurance Organization (JQA) once every five years. 【Features】 ● By simply turning on the power and pressing the start button, it can simultaneously display and measure instantaneous values and maximum values. ● It is equipped with three measurement functions: - Time-weighted sound level Lp (instantaneous value) - Time-averaged sound level Leq - Maximum time-weighted sound level Lmax ● With the "OLED display" that is easy to see even in dark places, the numerical display is easy to read, and it features a bar graph display that clearly shows noise fluctuations. ● It has a power-saving design that allows for continuous operation for over 9 hours using two AA batteries (alkaline batteries or nickel-metal hydride rechargeable batteries). *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Noise Inspection

The "Opasimeter GSM-210 Series" is a diesel vehicle exhaust gas measurement device that complies with the technical standards established by the amendments to the Road Transport Vehicle Act Enforcement Regulations. It is designed to be less affected by external light, and the optical system is easy to clean. The "GSM-210R" allows for easy operation with the main unit and a wireless remote control, and it can indicate the accelerator operation with a countdown and "press" / "release" lamps. 【Product Lineup】 ■GSM-210R (with wireless remote control) ■GSM-210 (with wired remote control) *For more details, please refer to the PDF document or feel free to contact us.

• Electrical Instruments/Electrometers
• Other measurement, recording and measuring instruments

The "MEXA-324M" is an automobile exhaust gas measuring device that allows for easy Japanese display. It measures carbon monoxide (CO) and hydrocarbons (HC) in automobile exhaust using the non-dispersive infrared absorption (NDIR) method, easily and with high precision. Whether during inspections and checks at automobile maintenance shops or during general engine adjustment work, accurate exhaust gas concentrations can be quickly determined. 【Features】 ■ Alerts with color changes for "Measurement" and "Standby" ■ User-friendly Japanese display ■ Clear visibility from diagonal angles and distant positions ■ Newly developed drain separator adopted ■ New material sampling tube adopted - For orders of some consumables, click here: https://www.amazon.co.jp/dp/B0B59R3NDK/ref=twister_B0BBYS7V1M?_encoding=UTF8&th=1 https://www.amazon.co.jp/dp/B0B57XVBXB *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "Opacimeter MEXA-600SW" is an optical transmission smoke meter that complies with the new regulations for particulate matter testing (PM testing) using an opacimeter. Compared to conventional light reflection black smoke measuring devices, it offers superior measurement accuracy and reproducibility, allowing for more precise measurements even at low smoke concentrations. It features a wireless remote control, providing excellent operability. 【Features】 ■ Compact and easy to carry ■ Remote operation possible while seated in the driver's seat ■ Wired connection also available ■ Easy vehicle type selection ■ Rounding of judgment values for reporting *For more details, please refer to the PDF document or feel free to contact us.

• Electrical Instruments/Electrometers
• Other measurement, recording and measuring instruments

The "DPF Cleaner for Diesel Vehicles" allows anyone to easily and effectively clean the DPF. The cleaning gun comes in a wide-angle type that can clean large areas and a direct injection type that is effective for severely clogged DPFs. They can be easily swapped. Additionally, it is equipped with a high-capacity pump that delivers approximately 2400L/h, flushing out dirt clogged in the DPF with water volume and pressure. 【Features】 ■ Compatible with various sizes of DPFs ■ Uses approximately 100L of circulating water ■ Equipped with a high-capacity pump of about 2400L/h ■ Adopts a two-chamber structure to prevent dirt from circulating easily ■ Comes standard with two types of cleaning guns and an air blow gun *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The "OK Klima Series" is a fully automatic refrigerant recovery and recycling unit equipped with a "fully automatic cleaning function." It is capable of completely extracting gas from the vehicle, recycling it, recharging it, and replenishing oil, all automatically without starting the engine. We offer a lineup including the dedicated R-1234yf model "OKC-1234AD" and the dual-use model "OKC-DUAL," which supports both R-134a and R-1234yf gases. 【Features】 ■ Fills the specified amount of gas ■ Built-in cylinder heater ■ Supports service for hybrid vehicles ■ Automatic oil quantity setting is also possible ■ Compatible with HV and EV *For more details, please refer to the PDF materials or feel free to contact us.

• Gas recovery/treatment equipment

- It has obtained type certification for the "inspection scan tool," so it can be used for OBD inspections. Of course, it can also be used as a "maintenance scan tool." - It supports ISO13400 (DoIP), and during inspections, you can choose between wireless and wired connections with Windows devices. - It comes standard with essential functions that are indispensable for a scan tool. - It continues to include convenient features such as the maintenance mode and DPF mode, which were well-received in the MST-7R. - The MST series continues to offer robust diagnostic functions and after-sales support. 【Features】 ■ Standard support for 23 manufacturers ■ 3-year update/device warranty and 1-year repair support included for peace of mind ■ Easy updates in 3 steps ■ Number registration function ■ Automatic vehicle selection function *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices

We would like to introduce the "Aiming-related Equipment" that we handle. Starting with the "Center Support Navi," which is used to derive the vehicle's centerline, we have a variety of support equipment for aiming tasks, such as the "Positioning Stand," which allows for the efficient derivation of perpendicular lines to the vehicle's centerline when used in combination. Without using support equipment, it is necessary to derive the target installation position with 2 to 3 people over a long period of time, but by using support equipment, one person can install the target in a short time. 【Product Lineup】 ■ Center Support Navi ■ Center Support Navi Cross ■ Positioning Stand ■ Side Line Guide ■ Multi Aiming Board ■ Multi Aiming Board 2 ■ Aiming Target ■ Radio Wave Absorption Panel/Sheet *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "Air Compressor" that we handle. The "BCLP series" is a compressor designed for low noise and low vibration, making it suitable for factory environment measures. The compressed air is controlled at 1.15 to 1.4 MPa, and it is more effective when used in conjunction with an auxiliary tank. Additionally, we offer a variety of models, including the tank mount type oil (lubricated) "CT/CTE/CTV series," which is equipped with a totally enclosed motor that eliminates concerns about troubles caused by dust, dirt, and moisture. 【Product Lineup (Partial)】 ■ Package Type Oil (Lubricated) - BCLP Series - CLP Series ■ Tank Mount Type Oil (Lubricated) - CT/CTE/CTV Series - TLP Series *For more details, please refer to the PDF document or feel free to contact us.

• Pneumatic Equipment
• Air Tools

The "Yosamu Cam Alignment" is a large vehicle alignment tester that achieves both speedy and high-precision measurements. Measurements can be taken easily by selecting each measurement mode and following the graphics. The measurement results can be managed on a computer, allowing for display switching by each axle or all axles. With the adoption of a lightweight and compact camera sensor (optical type), rolling runout measurement has been newly added in addition to jack-up runout measurement. 【Features】 ■ Responds to the increasing demand for large vehicle alignment ■ Adopts a lightweight and compact camera sensor ■ Achieves both speedy and high-precision measurements ■ Easy-to-understand and visually clear animations ■ Multiple selectable measurement modes tailored to the situation *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our wheel balancer, the "Formula Vector Series." The "VA801/2" is fully automatic from inputting wheel information to balance measurement, significantly improving work efficiency. The graphic display panel makes it very easy to understand and also helps in explaining to customers. In addition, we offer the entry model "VA601/2," which requires manual input of wheel information and is specialized for balance measurement, as well as the "V9901/2," which comes standard with a weight cutter. 【Product Lineup】 ■VA801/2 ■VA601/2 ■V9901/2 *For more details, please refer to the PDF document or feel free to contact us.

• Balancer

The "GeoLiner GL-680XD" is a 3D alignment tester equipped with a variety of measurement and adjustment modes suitable for total diagnostics. As an optical alignment tester, it measures alignment by using a camera unit to assess targets (reflective plates) attached to the tires. The camera unit is connected on both sides and is installed at the front of the vehicle, but due to its compact installation position, which is 1.5m from the front target, it minimizes interference with factory equipment. 【Features】 ■ Measurement time is approximately 5 minutes for speed measurement ■ For quick measurement of toe and camber, simply move the vehicle forward and backward a total of 30° ■ Targets are easily attached using tire clamps ■ The camera unit's height can be adjusted via keyboard operation *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce the "Wheel Dolly" that we handle. The "WDM-5001/5001A/5000N-2" is an all-purpose type that can be used in various ways. By using the optional brake drum attachment, it can also be used as a brake drum dolly. In addition, we also offer the "WDM-3000," which allows for quick and easy tire removal and installation, and the "HPWD-3000," which enables tire work at a high position. 【Product Lineup】 ■ General-purpose: WDM-5001/5001A/5000N-2 ■ Long stroke: WD-400LSA ■ Pallet type: WD-400PH-TP ■ Rail-moving type: WSL-WD-J3 ■ Mini type: WDM-3000 ■ High position type: HPWD-3000 *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines
• Other work tools

What is required from testers for diagnostic and proposal businesses is "speed," "high precision," and "ease of understanding." The "Microline Easy 3D Plus" is an optical alignment tester equipped with specifications suitable for this "diagnosis and proposal." It detects the shape of targets mounted on the wheel with a camera, measures the angle changes of the targets, and assesses the alignment. It allows for easy, efficient, and high-precision alignment measurements. 【Features】 ■ High precision measurement with 4 targets and 8 cameras ■ Measurement items equivalent to 8-sensor systems ■ Measurement time of 5 minutes, speedy ■ Can measure on lifts or floors ■ Unique camera layout for space-saving ■ Suitable for low-floor vehicles and customized vehicles *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "MON-8800P" is a newly designed leverless tire changer that employs Hoffmann's unique "power tool." Equipped with an automatic mechanism for tool operation, it allows for easy handling of high-difficulty tire changes by a single person. The simultaneous adoption of a side bead breaker also enables efficient handling of normal-sized tire changes. In addition, we offer the "MON-3300SAX," which comes standard with a tire support arm for more comfortable tire mounting and dismounting, as well as the "MON-3300 series," a standard model with expandability. 【Features】 ■ Newly designed dedicated power mount tool dynamic bead breaker ■ Electric quick lock ■ Equipped with side bead breaker ■ Color control panel & color monitor ■ Attachments specified by European car manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Geodyna Series" is a balancer that can accurately and reliably clamp wheels simply by lifting the pedal. The wheel guard is retractable, allowing for space-saving installation. When the weight mounting gauge is extended, the wheel automatically locks. With two sensors in the same environment, it is less susceptible to the effects of humidity, temperature, and shock, achieving stable and high-precision measurements. 【Features】 ■ VPM System ■ Electric Power Clamp ■ Slide Retractable Wheel Guard ■ IN-OUT Phase Stop Function ■ Automatic Wheel Lock Function *For more details, please refer to the PDF document or feel free to contact us.

• Balancer

The "Hybrid Type-S" is an electric automatic air bleeding exchange machine that supports the efficiency of service for vehicles ranging from light to large sizes. The pressure pump has been upgraded to 1.5 times its conventional power. This enables smoother brake fluid exchanges and allows for more efficient air bleeding operations for booster clutches in large trucks. With a dehumidifying device, brake fluid management is thoroughly ensured, and since the electric pump performs the fluid pressure transfer, after setup, you only need to loosen the wheel's bleeder plug to carry out fluid exchange and air bleeding. 【Features】 ■ Pressure pump upgraded to 1.5 times its conventional power ■ Realization of new technology and energy savings ■ Allows anyone to perform uniform work ■ Easy operation with universal adapters and vehicle-specific dedicated adapters ■ Compatible with ABS, ECB, and equipped vehicles *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Class 4 hazardous materials, which are flammable liquids, have specified quantities set by law for each classification, determining the storage and handling amounts. When storing or handling small quantities of hazardous materials, standards are established by the fire prevention regulations of each municipality, and prior consultation and notification with the relevant fire department are required. The "BB Series" is a storage cabinet for small quantities of hazardous materials equipped with a forced ventilation system that rotates with wind power as standard. The floor, sloped at 1/100, uses corrugated steel plates, ensuring that any spillage is collected in the sump under the ventilator. 【Features】 ■ Raised floor design eliminates the need for pit construction ■ Low raised floor height of H200mm, eliminating the need for steps ■ Quick installation possible ■ Customization available upon request ■ Door position changes and double-opening doors can also be accommodated *For more details, please refer to the PDF materials or feel free to contact us.

• locker
• cabinet

With the CVT/AT fluid check sensor, you can easily perform a fluid diagnosis in just 30 seconds. You can choose from three fluid exchange modes according to your needs, focusing on ease, speed, and reliability as the development theme. Additionally, the oil level adjustment temperature range has become temperature-free, covering low to high temperatures. The diagnostic results printed can be presented to customers, allowing for proposals for transmission maintenance and fluid sales. 【Features】 ■ 3 modes CVT/AT fluid check sensor ■ Integrated oil drain structure ■ 3-mode fluid exchange system ■ Automatic residual oil discharge function ■ Compatible with all domestic passenger cars and light vehicles Purchase some optional items and consumables here: https://www.amazon.co.jp/dp/B0B57XY6FR *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog introduces Banzai's "Oil Service System." It focuses on the basic car maintenance task of oil changes, which are repetitive in nature, and manages each function—from refueling to waste oil disposal—through a centralized system that connects them with the shortest possible workflow. This achieves an ideal work efficiency and labor environment. We hope you will find this product useful as part of your service strategy. Please use it to assist in your product selection. [Contents] ■ Refueling System ■ Oil Supply and Waste Oil System ■ Waste Oil System *For more details, please refer to the PDF document or feel free to contact us.

• Other environmental equipment

We would like to introduce our high-pressure hot water cleaning machine, the "Nice Hot Series." Starting with the environmentally friendly "Basic Type" that matches the ECO era, we also offer a "Energy-Saving Type" that automatically stops the motor when not in use, cutting unnecessary electricity. Additionally, we have a variety of "car wash equipment" that can be combined with underwashers, gantry car wash machines, and seat cleaners to improve work efficiency. 【Product Lineup】 ■ Basic Type - KHW-1100D2 / KHW-1300D - KHW-1600C / KHW-2100C ■ Energy-Saving Type - NHW-1000JS / 1500I / 2000I / CWH-R16V3 ■ Ultra Big Type - NHW-5000HS / PNW-5000BS - For orders of some consumables, click here: https://www.amazon.co.jp/dp/B09Y62BLPF?th=1 *For more details, please refer to the PDF document or feel free to contact us.

• High pressure cleaner
• Other cleaning machines

The "Flat Work Stage X (4-ton specification)" features a two-stage lifting speed and is an X-link drive-on lift that makes height alignment easy. It ensures high precision runway levels within 1mm on the left and right, and within 2mm diagonally front and back. Even at the lower limit position, the horizontal accuracy is high. The overall length and width have been significantly increased compared to conventional models, making it easier to drive in wider vehicles, while the inner width remains the same as conventional models, allowing for safe lifting of compact cars. 【Features】 ■ Drive-on lift / Freewheel lift ■ Electronic control step correction function ■ Increased rigidity of the lift ■ Long and wide runway ■ Flat kit included as standard *For more details, please refer to the PDF materials or feel free to contact us.

• lift

The "Gate Lift IV Series" is a gate-type two-column lift that has transitioned from a lever system to a wired remote control. When it rises 200mm from the lower limit, it automatically locks with a gear engagement system. It allows for wide opening of doors on passenger cars, RVs, etc., making it easy to get in and out, and enabling efficient work. Additionally, it employs a silent mechanical lock system to reduce noise during lift ascent, and with LED lighting, work under the vehicle can be done with both hands without needing a work light. 【Features】 ■ Improved operability with a compact and lightweight wired remote control ■ Shortened movement lines during lift-up operations ■ Generous capacity of 3.7t accommodating a wide range of vehicle types ■ Clean foot space with a flat work area *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Flat Work Stage X (5-ton specification)" is an X-link drive-on lift equipped with various safety mechanisms for safe operation. With a lifting capacity of 5 tons, it can accommodate an even wider range of vehicle types compared to conventional models. Along with the increased capacity, the rigidity of the lift body has also dramatically improved. The new control panel, equipped with a small monitor, features a liquid crystal touch panel that can display various information such as lift usage time and frequency, power consumption, CO2 emissions, and warnings during lift malfunctions. 【Features】 ■ Dramatic increase in lifting capacity and body rigidity ■ Equipped with safety devices ■ Standard flat kit included ■ New control panel included ■ Standard pit lift included ■ Two-stage lift raising speed *For more details, please refer to the PDF document or feel free to contact us.

• lift

This product is a pantograph lift that offers excellent stability and accommodates a wide range of vehicle types and services. The floor remains flat during both ascent and descent, creating a service environment with good workability and ease of installation. For high-lift points such as RVs and trucks, the lift can be raised before setting the arms, making it compatible with a wide variety of vehicles and easy to set up. 【Features】 ■ Capacity: 3.2 tons, Lifting height: 1.8 m ■ Compatible with RVs and small trucks ■ Achieves a flat working surface without worrying about foot placement ■ The floor remains flat during ascent and descent, enhancing the aesthetics of the workshop ■ Energy-saving design that can be used with an air pressure of 0.4 MPa *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Gojakki" is a simple vehicle moving unit that allows for easy lifting and movement. Lifting and lowering can be differentiated using a double-claw ratchet. It has a low center of gravity for stability and does not require power sources such as electricity, hydraulics, or air. Additionally, we offer a dedicated rack "456" for the Gojakki that can hold two sets (four units) and features casters for easy movement. 【Features】 ■ Combines lifting (jack) and dolly (movement) functions simultaneously ■ Low center of gravity for stability, no power sources required ■ Lifting and lowering can be differentiated using a double-claw ratchet ■ No parts in contact with the vehicle other than the tires, eliminating the risk of damaging the car ■ An L-type pedal that is easier to step on has been added (6313-L) *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Gate Lift III Series" enhances workability and safety, featuring a versatile lift that refines basic functions. Without a left-right connecting base, vehicle entry and exit are easy. The mission jack and work cart allow for free movement, eliminating tripping hazards during work. It accommodates a wide range of vehicle types and services, supporting comfortable service. 【Features】 ■ Compatible with a wide range of vehicle types and services ■ Clear foot space and flat work area ■ Mechanical lock activates at a height of 60mm from the lowest position ■ Automatic lock engages with a gear engagement mechanism when raised 200mm from the lowest position ■ Front and rear arms utilize a three-stage telescoping arm *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Gate Lift Slim II" is a floor-mounted gate lift that can accommodate a wide range of services, from light passenger cars to small trucks. It is equipped with essential functions required for safety and operability. The arm sway prevention device prevents the arm from rotating and detaching from the lifting point in the event that the vehicle lifts off the set receiving plate. Additionally, it allows for easy ascent with a push button, descent with a lever, and mechanical lock release with just one touch. 【Features】 ■ Minimum receiving plate height of 120mm, making it easy to set up for low-floor vehicles ■ Smooth ascent and descent with electric hydraulic and wire synchronization ■ Standard screw-type receiving plate for easy height adjustment ■ Rack and claw type mechanical lock to reliably prevent unexpected descent ■ Roof sensor detects the ascent limit and automatically stops *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog introduces our link-type drive-on lift, the "Work Stage X Series." Capacity: 3.2 tons. X link-type drive-on lift. Vehicles can be driven on and quickly lifted up. It is ideal for quick maintenance tasks such as oil changes and undercarriage inspections. We will propose the most suitable model from a rich lineup of 24 models that match your intended use. In addition, we also offer 4-ton and 5-ton specifications that can accommodate the required lift levels for various alignment testers. [Featured Products (Partial)] ■ WSX-F230 Series ■ WSX-F231 Series ■ WSX-N230 Series ■ WSX-N231 Series *For more details, please refer to the PDF document or feel free to contact us.

• lift

This catalog summarizes the "Garage Jacks" that our company handles. In addition to "Garage Jacks," we also feature "Air Garage Jacks" and "Aero Oil Jacks." With a full lineup that accommodates a wide range of vehicle types and service scenes, they serve as the mechanic's hands and feet, contributing to a variety of services. Please use this for selecting products. 【Featured Products (Partial)】 <Garage Jacks> ■SJ-20L-2 ■M-200DX ■SJ-30H ■SJ-50H *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We handle the electric hydraulic test lift "Platon Series." The "TL-P101AS-C" features a floating slider design, allowing the slider to be moved with ease, similar to the receiving platform of our large vehicle lift "Caterpillar Twin II." The "TL-PS150AS" is a test lift with a built-in mechanical lock and a capacity of 15 tons, making it easy to handle large vehicles. 【Product Lineup】 ■ Platon 10 (Capacity 10 tons) ・TL-P101AS: Standard Specification ・TL-P101AS-C: Floating Slider Specification ■ Super Platon Big (Capacity 15 tons) ・TL-PS150AS: Built-in Mechanical Lock *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Valyten II VALY-10A" is a vertical lift jack with four wheels, making it very easy to move. Its low body (frame) height allows it to easily accommodate low-floor vehicles over 4 tons. The operation to release the locking claws is very simple, as you only need to grip the stopper release lever on the hand-held handle, making the task very easy. Additionally, using two hydraulic cylinders in parallel enhances safety and durability. 【Features】 - 10-ton power significantly improves efficiency for servicing the undercarriage of medium to large vehicles. - Easy to move and set up. - Easily jack up any vehicle type. - Exceptional functionality, widely used from vehicle inspection maintenance to quick services. *For more details, please refer to the PDF document or feel free to contact us.

• lift

The "Combination Tester" is a brake and speedometer testing machine with improved visibility and design. The "500 Series for Large Vehicles" enhances the safety of inspectors through flattening. It is available in two sizes: 27 inches and 42 inches. The "180 Series for Small Vehicles" has a generous capacity of 3.6 tons, accommodating RVs and small trucks, and can also be equipped with an SS (gas station) specification as an option. 【Features of the 500 Series for Large Vehicles】 ■ Compatible with a wide range of vehicle types, from light vehicles to large automobiles ■ Displays the hold value of braking force, the sum of left and right braking forces, and the sum of maximum braking forces ■ Can be equipped with a motorized device to rotate rollers for measuring speedometers (optional) ■ Added a lineup of graphic meters with excellent visibility and design *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

We would like to introduce our vehicle inspection equipment, the "Side Slip Tester." We offer a wide range of models suitable for everything from light vehicles to large trucks. Equipped with axle slip measurement functionality for ECO maintenance of front-wheel two-axle large vehicles, we also provide a left-right separated model that can be installed on both sides of the inspection pit for large vehicles. 【Product Lineup】 ■WGW-1000BD (Axle weight 10 tons) ■WGT-1000BD (Axle weight 10 tons) ■WG-500CD (Axle weight 10 tons) ■WG-150DD (Axle weight 3 tons) ■WGK-180B (Axle weight 3.6 tons) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "Triple Tester" is a combined testing machine for side slip, brake, and speed, packaged with three functions in one. It has a permissible axle weight of a generous 3.6 tons and can accommodate inspections for ambulances and some packer trucks. With a thickness of 240mm, it is easy to install and suitable for multi-story factories. Equipped with an auto-stop function, it automatically stops the roller motor if the maximum sum of the left and right does not update for a certain period, preventing unnecessary wear on locked tires. 【Features】 ■ Permissible axle weight: 3.6 tons ■ Main body size: 240mm ■ Two types of selectable rollers (hybrid embossed roller / groove roller) ■ Improved visibility and design ■ Capable of displaying the "sum," "difference," and "maximum" of brake measurement values *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "Headlight Tester 500 Series" is a product that can also accommodate pulse lighting LED lamps. Through detailed image analysis by the CPU, a Z-shaped mark is displayed on the screen. It also follows and displays light distribution patterns with steep cut line rises. In addition to displaying the measured result values on the screen in the same format as maintenance records, it helps prevent miswriting of values and supports the operator. 【Features】 ■ Support for Z-shaped light distribution patterns ■ Measurement result display function ■ Visual inspection mode function ■ Compatibility with new LED lamps through proprietary technology ■ Supports installation height of 25 cm *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments
• Image Processing Equipment
• Other image-related equipment

The "Headlight Tester 300 Series" is a product that can measure from a fog lamp installation height of 25 cm. It is compatible with LED lamps that cannot be measured with conventional testers for some vehicle models. Thanks to the C-MOS camera and sensitivity correction filter, it can accommodate any color of light. All models come standard with a lamp image finder (screen), and the lamp alignment has been made even easier with the cross-line laser function. 【Features】 ■ Compatible with LED pulse control ■ Supports new type headlights (LED) ■ Cross-line laser standard on all models ■ Can accommodate vehicles without lamp alignment marks ■ Compatible with installation height of 25 cm *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Image Processing Equipment
• Other image-related equipment

The "Network Series" is an inspection efficiency system developed with the concept of reducing the workload of inspectors. It features a large monitor and uses gentle color schemes that are easy on the eyes. It can display the progress of multiple vehicles on a single screen, allowing for color-coded assessment of work status. It is user-friendly for those who are not comfortable with computers, and the implementation of this system significantly reduces the burden on inspectors. 【Features】 ■ Strengthening compliance ■ Prevention of human errors ■ Reduction of handwritten tasks ■ Automatic calculation of inspection values ■ Reduction of inspector workload ■ Shortening of vehicle inspection time *For more details, please refer to the PDF materials or feel free to contact us.

• Other information systems
• Software (middle, driver, security, etc.)
• Other embedded systems (software and hardware)