井上電設 Product Lineup

Here is an introduction to the workflow of our "wood pellet manufacturing equipment." We crush thinning materials, forest residuals, sawmill scraps, and bark, followed by drying. Then, we further grind, store the raw materials, adjust moisture content, and proceed to molding, cooling, and screening. After that, we store the products and carry out packaging and shipping. For more details, please refer to the PDF download below. [Workflow (Partial)] ■ Crushing ■ Drying ■ Grinding ■ Storage (Raw Materials) ■ Molding * For more information, please refer to the PDF document or feel free to contact us.

We would like to introduce our company's cooling equipment and screening for wood pellets. Cooling and screening are essential processes for producing high-quality pellets. The "cooling equipment" increases the strength of the soft and brittle pellets, which are nearly 100°C immediately after molding, and prevents them from breaking down. The "screening" removes fine particles mixed with the pellets that can cause combustion problems in stoves and boilers. 【Product Lineup (Partial)】 <Cooling + Screening> ■ Trommel Cooler ・PCT29 (30–150 kg/h) ・PCT38 (150–500 kg/h) ・PCT55 (500–1000 kg/h) *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce our company's "packaging, weighing, and supply equipment" for wood pellets. Wood pellets typically have a diameter of 6 to 8 mm, a length of 5 to 30 mm, a bulk density of 650 kg/m3, and a calorific value of 4000 kcal/kg. They are a dust-free, environmentally friendly alternative energy source to fossil fuels, characterized by excellent flowability, uniformity, and high energy density. Additionally, wood pellets are delivered in small bags as stove fuel and in bulk bags or dedicated bulk trucks as boiler fuel. Silos need to be designed considering the consumption volume and receiving methods, including storage capacity and the height of the receiving inlet. 【Product Lineup (Partial)】 <Packaging and Weighing> ■PBW1000 ■PBW20 ■PBFII *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce examples of the installation of our "Wood Pellet Manufacturing Equipment." We have examples with a production capacity of 1,000 kg/h using the SPM500 (55kw×2) pelletizer, as well as examples with a production capacity of 50 kg/h using the PT2242 (22kw) pelletizer, and examples with a production capacity of 50 to 100 kg/h using the S15 (11kw) pelletizer. Inoue Electric is committed to creating a comfortable environment. Please feel free to contact us when you need our services. 【Installation Examples】 ■ Production Capacity: 1,000 kg/h / Pelletizer: SPM500 (55kw×2) ■ Production Capacity: 1,000 kg/h / Pelletizer: CPM3000 (90kw) ■ Production Capacity: 1,000 kg/h / Pelletizer: TS450×2 units (45kw×2) ■ Production Capacity: 1,000 kg/h / Pelletizer: SPM500 (55kw×2) ■ Production Capacity: 150 kg/h / Pelletizer: PT2242 (22kw) ■ Production Capacity: 50 to 100 kg/h / Pelletizer: S15 (11kw) *For more details, please refer to the PDF document or feel free to contact us.

The "RC" is a reciprocating fuel container that allows for the drying of wet chips thanks to its newly developed drying function (optional). The container can be managed as cargo on a detachable container vehicle. It is equipped with a discharge mechanism, eliminating the need for fuel loading operations. Since the construction of fuel silos is not required, the introduction costs for boilers can be significantly reduced. 【Features】 ■ Low cost ■ Versatility ■ Dust-free ■ Quality control ■ Patent obtained *For more details, please refer to the PDF document or feel free to contact us.

The "BD" is a belt-type chip dryer. It operates on a first-in, first-out basis, discharging dried chips in order. Since it allows for precise discharge, it is ideal as a fuel supply device for small chip boilers. You can utilize heat from biomass boilers or factory waste heat as a drying heat source. We recommend its introduction to small-scale CHP, small boilers, and pellet production lines. *For more details, please refer to the PDF materials or feel free to contact us.

The "CD" is a rotating drum-type chip dryer. It uses a first-in, first-out method, discharging the dried chips in order. Since it allows for precise discharge, it is ideal as a fuel supply device for small chip boilers. You can utilize heat from biomass boilers or factory waste heat as the drying heat source. We recommend its introduction to small-scale CHP, small boilers, and pellet production lines. *For more details, please refer to the PDF materials or feel free to contact us.