ツビックローエル Product Lineup

TUC: Measurement of deformation behavior (thickness under compression) RUC: Measurement of electrical resistance (resistance under compression) PUC: Measurement of gas permeability (permeability under compression) The multifunctional battery cell component analysis device (MCAA) is a testing apparatus that can measure these simultaneously with a single testing machine. Mechanical testing of batteries and battery cells other than the above is also possible. For individual inquiries, please visit https://www.zwickroell.com/ja/contact/ Japanese input is accepted. Contract testing is not conducted.

• Lithium-ion battery
• Secondary Cells/Batteries
• Testing Equipment and Devices

For details, it is necessary to check various conditions. Please visit https://www.zwickroell.com/ja/contact/. Japanese input is available, and we do not conduct commissioned testing. This is a universal pendulum impact testing machine that can be equipped with various hammers ranging from 0.5J to 50J, allowing both Charpy impact tests and Izod impact tests to be conducted with a single unit. Although this testing machine was developed for the evaluation of plastics, it can also be used for the evaluation of recycled non-ferrous metals (aluminum), which are expected to be in demand in the future, and hammers are available with both standard and instrumented blades. Calibration according to ISO (DaKKS) is also possible as needed.

• Steel
• Non-ferrous metals
• plastic

The Tsubick-Roel extensometer continues to evolve. There are two types: contact extensometers and non-contact extensometers, which can be used according to the situation. The following information is needed for selecting an extensometer: 1. What material is the specimen (test piece) made of? 2. Dimensions of the specimen (length, width or diameter, thickness, GL value, weight) 3. Measurement content (I want to see elongation. I want to measure both elongation and width. I want to measure the Poisson's ratio.) 4. Testing standards (if the test is to be conducted according to standards) It is also possible to install on testing machines from other manufacturers as an add-on, but in that case, it will only output measurement data in analog form. If you want to perform strain control, it will need to be purchased as a set with the testing machine.

• Steel
• plastic
• Special Steel

For individual inquiries, please visit https://www.zwickroell.com/en/contact/. Japanese input is available, and we do not conduct commissioned testing. The DuraVision series hardness testers have the following features: - Fully automatic testing machine that automatically determines the test points after setting the specimen. - Specimens can be tested in their original shape if they are parts, in addition to cut test pieces like reference blocks. - The clamping force that holds the specimen is strong enough to prevent slipping, even when the specimen is coated with cutting oil during processing. - The testing method changes depending on the test range, but you can switch between Brinell, Vickers, Micro Vickers, Rockwell, Knoop, and Jominy tests with the push of a button. - In Europe, there are practical applications where it is used in processing lines to measure surface hardness after surface treatment and then proceed to the next process.

• Steel
• plastic
• Rubber

For individual inquiries, please visit https://www.zwickroell.com/en/contact/ Japanese input is available. Contract testing is not conducted. InspiraPen and Pen Injector / ISO 11608-1, 2, 3 Catheter Tensile Test / ISO 10555 Cannula and Needle Damage Resistance / ISO 9626 Clean Room / ISO 14644-1, 14 Condom Tear Strength / ISO 4074 Syringe Plunger Glide Force / ISO 7886 Stent Radial Compression Test / ASTM F3067 Face Mask / ISO 16900 Prefilled Syringe Testing Methods for Integrity and Functionality / ISO 11040, -4, -6, -8 Luer Luer Lock Connection / ISO 80369-7, -20 Packaging Residual Seal Force (RSF) Vial / USP 1207 Medical Examination Gloves Tensile Test / ISO 11193-1, -2

• Pharmaceutical factory equipment
• Parts Evaluation Test
• Testing Equipment and Devices

Regardless of whether it is an internal combustion engine, EV, HEV, PHEV, or FC, the lightweighting of automotive body steel sheets has become an eternal theme in advancing the lightweighting of automobiles. To achieve lightweighting, the use of high-strength steel sheets raises the issue of poor workability, which automotive OEMs and Tier-1 companies are addressing through research to improve formability. As the strength of high-tensile steel sheets reaches GPa levels, existing formability testing machines are insufficient in capacity. We introduce a 1000 kN class formability testing machine (for hole expansion tests, deep drawing tests, Erichsen tests, etc.) as a solution to this problem. For individual inquiries, please visit https://www.zwickroell.com/ja/contact/. Japanese input is accepted, and contract testing is not conducted.

• Steel
• Vehicle body parts
• aluminum

For individual inquiries, please visit https://www.zwickroell.com/en/contact/. Japanese input is available. We do not conduct commissioned testing. ZwickRoell's lineup of testing machines: - Tensile testing of battery welding joints - 90° adhesive strength testing of electrode coatings - 90° & 180° adhesive strength testing of electrode coatings - 180° adhesive strength testing of electrode coatings - Z-direction adhesive strength testing of electrode coatings - Tensile and puncture testing of battery foils

• Composite Materials
• Lithium-ion battery
• Fuel Cells

For individual inquiries, please visit https://www.zwickroell.com/en/contact/. Japanese input is available. We do not conduct contracted testing. ZwickRoell's lineup of testing machines: - Screw-type universal testing machines - Screw-type universal testing machines + fully automated systems / continuous fully automated systems - Screw-type universal testing machines + testing fixtures for various medical devices / compliant with various ISO standards, industry-leading IQ/OQ - Hardness testers / portable hardness testers that can accommodate multiple testing methods in one device - Hole expansion testing machines / hole expansion testing for GPa-grade steel + fracture detection AI software - High-temperature testing machines / compatible with creep, tensile, compression, and fatigue testing, standardized up to 2000°C, vacuum chamber - Creation of test specimens for hydrogen hollow testing - Screw-type universal testing machines + strain control - Screw-type universal testing machines + thin film chuck fixtures (for evaluating materials for lithium-ion batteries and fuel cells) - Screw-type universal testing machines + constant temperature baths (for resin evaluation) - Contact extensometers / also compatible with specimen fracture - Non-contact extensometers / strain control, high-temperature and ultra-high-temperature evaluation

• Steel
• plastic
• reagent

"DuraVision" is known for its efficiency in solving various testing tasks and in macro hardness testing applications. Even in harsh industrial environments, reliable performance of this hardness tester can be expected, and it always complies with applicable standards. Practical templates and comprehensive help features make macro hardness testing simple and easy to understand for a variety of users. 【Features】 ■ Load range: 0.3 - 3,000 kg ■ Clamp and unclamp testing ■ Optional modules ■ Automatic testing sequence ■ Control via touch display or PC ■ Semi-automatic and fully automatic versions *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

"ProLine" is a device suitable for routine material testing and functional evaluation testing of components. When combined with our testing software, tests can be executed quickly and easily. All mechanical parts, electronics, software, and corresponding accessories are seamlessly produced at our factory in Germany. [Features] ■ Safety compliant with EC Machinery Directive ■ Powerful drive ■ High rigidity and precise crosshead drive ■ Safety of the testing system ■ Mechanical modular design ■ Short delivery times *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices

The "zwickiLine" is a powerful, flexible, and cost-effective testing solution for a wide range of materials and components. It is suitable for research and development as well as routine quality assurance testing. With a wide range of equipment options, it can be used for testing components in plastics, elastomers, metals, composites, paper, cardboard, textiles, foams, food, medical engineering, and the pharmaceutical industry. 【Features】 ■ Intuitive and workflow-based from the start ■ Modern and high-quality load frame design *For more details, please download the PDF or feel free to contact us.

• Testing Equipment and Devices