KDK Chemical Product Lineup

This document introduces DIATEX products handled by KDK Chemical Co., Ltd. It includes items such as the nylon bagging film "DIATEX PA205," the PA copolymer film "DIATEX PO180," and the PE + PA bagging film "DIATEX PO120." Additionally, it also introduces the use of PLUGs and various connectors. 【Contents (partial)】 ■Auxiliary material composition in the bagging molding process ■Auxiliary material composition in infusion molding ■DIATEX PA205 NYLON BAGGING FILM ■DIATEX PO180 ECONOMIC BAGGING FILM ■DIATEX PO120 BAGGING FILM ■DIATEX PMP200 RELEASE FILM *For more details, please download the PDF or feel free to contact us.

• others

The "SP2000P" is a low molecular weight styrene-maleic anhydride copolymer with a molar ratio of approximately 2:1 of styrene to maleic anhydride. It can be used particularly in thermoplastic plastics to improve melt flow properties and enhance interactions with fillers and pigments, thereby improving dispersibility. Additionally, due to its abundant maleic anhydride groups, it can also be utilized as a curing agent for epoxy resins, a chelating agent for metal ions, and a polymer-based surfactant. 【Performance】 ■ Improved dispersibility ■ High reactivity ■ Chelating action for metal ions ■ Heat resistance *For more details, please download the PDF or feel free to contact us.

• Other polymer materials

The "CRT-40" is a translucent, condensation-type, high-strength silicone that has a low viscosity level comparable to general-purpose types, making it highly effective for mixing, stirring, degassing, and pouring tasks in mold-making silicone rubber. Additionally, because the silicone is translucent, air bubbles can be easily visually confirmed. During the demolding of the original model or when producing replicas, the visibility inside the silicone mold is improved, leading to higher work efficiency. 【Properties after curing】 ■ Rubber hardness (Shore A): 40 ■ Tensile strength (Mpa): 4.0 ■ Tear strength (N/mm): 25 ■ Elongation (%): 450 *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

"IS-CRN25" is a highly flexible silicone rubber with a rubber strength of 25 degrees and an elongation rate of approximately 500%. Additionally, compared to typical low-hardness, high-strength silicone, its viscosity before curing is about 2/3, improving workability. It can be used for complex mold making that has previously been difficult to demold, including figures, crafts, artificial rocks, and artificial wood. 【Features】 ■ Rubber strength type 25-28 degrees ■ An elongation rate of 500%, making it suitable for mold making of artificial rocks and wood ■ The curing agent is colored red to visually prevent mixing errors *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

The "IS-CRN40" is a silicone rubber for molding that, despite being a high-hardness type, possesses low viscosity comparable to that of general-purpose types, making it highly effective for mixing, stirring, degassing, and pouring operations. The strength after curing is approximately nine times that of standard molding types (tensile strength). The number of releases is several times greater compared to typical molding silicones (according to our company), allowing for a smaller mold area even for larger quantities. 【Features】 - Low viscosity before curing (13-15 Pa·s) - Easy mixing, stirring, and pouring - Low viscosity similar to domestically produced general condensation types - Tear strength (resistance to tearing) is about nine times stronger - The curing agent is colored green, preventing visual mixing failures *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

We offer two types of high-strength (high tear resistance) low-viscosity "molding silicone rubber series" that are easy to pour. "CRN40" has a low viscosity before curing (13-15 Pa·s), making mixing, stirring, and pouring easy. "CRN25" is a rubber hardness type of 25-28 degrees, with an elongation rate of 500%, making it suitable for molding artificial rocks and wood. Additionally, our products contain a promoter on the curing agent (catalyst) side, which minimizes thickening of the main agent due to storage, ensuring long-lasting performance. 【Features】 ■ High strength ■ Low viscosity ■ Low price *For more details, please download the PDF or feel free to contact us.

• Rubber

We handle "Unsaturated Polyester Resin 8120X・W." 8120X is a non-wax type, while WC is a wax type. We specialize in the production of FRP molded products (such as yachts, boats, bathtubs, water tanks, and rigging tools) using hand lay-up and spray-up techniques. Please feel free to contact us if you have any requests. 【Packaging】 ■20kg: Can ■225kg: Drum *For more details, please download the PDF or feel free to contact us.

• Chemicals