ギガ・セレクション（ギガセレクション） Product Lineup

This is a parts cabinet ideal for managing small items and components.

• Storage

Using joints, you can connect vertically and horizontally.

• Storage

It comes with a lid and can be stacked for storage.

• Storage

You can choose your preferred item according to the size and capacity of the tool.

• Storage

We offer three types of shapes: square, round, and a combination of both.

• Storage

There is a wide variety of types available, such as differences in size and the number of drawers, so you can choose what you like.

• Storage

You can hang the raw nails on the bolts of 67 pieces on one side × 2 sides for storage.

• Storage

Giga Selection's raw nails come in a wide variety and are standard stock. Custom orders take time and are more expensive... However, with Giga Selection, there is a possibility to purchase even those raw nails quickly and at a low price.

• Chuck

This is a small diameter raw jaw for the HO type hydraulic chuck from Kitagawa Iron Works.

• jig

The "SEEM440" is a 4-blade carbide square designed to prevent chatter through unequal division. It features a large chip pocket that ensures good chip evacuation. The blade length is approximately 2.5D, making it a medium blade. With high-quality ultra-fine particle carbide and a high heat-resistant ALCrN coating, it is suitable for a wide range of materials from general steel to difficult-to-cut materials. It offers excellent cost performance. 【Features】 ■ Large chip pocket for good chip evacuation ■ Chatter prevention through unequal division ■ Blade length is approximately 2.5D, medium blade ■ Wide compatibility from general steel to difficult-to-cut materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■ Outstanding cost performance *For more details, please download the PDF or feel free to contact us.

• Other cutting tools

The "SJDM440" is a four-blade ultra-hard square end mill made from ultra-fine particle carbide. It features a high heat-resistant TiSi-based coating that improves wear resistance. The design has an increasing core thickness towards the shank, achieving high rigidity. It demonstrates high performance on harder work materials with a hardness of HRC 35 or higher, as well as difficult-to-machine materials such as stainless steel and Inconel. 【Features】 ■ Ultra-fine particle carbide ■ Improved wear resistance due to high heat-resistant TiSi-based coating ■ Excellent vibration resistance with uneven division and uneven lead (39/42 degrees) ■ High rigidity achieved with a design that increases core thickness towards the shank *For more details, please download the PDF or feel free to contact us.

• Other cutting tools

The "RCEM440" is a 4-flute, 40-degree spiral roughing end mill. By adopting an uneven division and a 40-degree spiral, it achieves a quiet cutting sound. With high-quality ultra-fine particle carbide and a high heat-resistant ALCrN coating, it can handle a wide range of materials from general steel to difficult-to-cut materials. Additionally, the moderately rounded corner C face helps prevent chipping. We have added variations with different cutting lengths and slim shank types, providing excellent cost performance. 【Features】 ■ 4-flute, 40-degree spiral roughing end mill ■ Quiet cutting sound due to uneven division and 40-degree spiral ■ Fine pitch achieves low resistance, reducing machining load ■ Moderately rounded corner C face prevents chipping ■ High-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

• End Mills

The "SJES440/SJEL435" is a four-flute carbide square end mill that features high-quality ultra-fine particle carbide and a high heat-resistant ALCrN-based coating. The SJES440 is a short-flute type with a 37/40-degree twist, suitable for groove machining and automatic lathe processing. The SJEL435 has a 35/38-degree twist and a long flute type with a length ranging from 4D to 5D. Both models are compatible with a wide range of materials, from general steel to difficult-to-machine materials. Please feel free to contact us if you have any inquiries. 【Features】 <SJES440> ■ Four flutes, 37/40-degree twist, short-flute type ■ Suitable for groove machining and automatic lathe processing <SJEL435> ■ Four flutes, 35/38-degree twist, long-flute type with a length of 4D to 5D ■ Suitable for side machining *For more details, please download the PDF or feel free to contact us.

• Other cutting tools

■4-blade, 35/38 degree twist, long blade type with a blade length of 4D to 5D ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-cut materials thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating *For more details, please download the PDF or feel free to contact us.*

• End Mills

The "SEEM235/SZES345" is a carbide end mill that can handle a wide range of materials from general steel to difficult-to-cut materials. The "SEEM235" is a two-flute end mill with a 35-degree twist and pin-shaped tip, featuring a medium cutting length of 2.5D to 3D. It is suitable for flat machining, side machining, groove machining, and helical machining. The "SZES345" is a three-flute end mill with a 45-degree twist, excelling in Z-axis machining. Its special shape at the bottom and large gash ensure excellent chip evacuation, with a slightly short cutting length of 1.5D to 2.2D. 【Features】 <SEEM235> ■ Two-flute end mill with a 35-degree twist and pin-shaped tip ■ Medium cutting length of 2.5D to 3D <SZES345> ■ Three-flute end mill with a 45-degree twist, excelling in Z-axis machining ■ Special shape at the bottom and large gash ensure excellent chip evacuation ■ Slightly short cutting length of 1.5D to 2.2D *For more details, please download the PDF or feel free to contact us.

• End Mills

- 3-flute, 45-degree twist end mill that excels in machining along the Z-axis. - The special shape of the bottom cutting edge and large gash ensure excellent chip evacuation. - The cutting length is a slightly short blade ranging from 1.5D to 2.2D. - Capable of handling a wide range of materials from general steel to difficult-to-cut materials, thanks to high-quality ultra-fine particle carbide and high-heat-resistant ALCrN coating. *For more details, please download the PDF or feel free to contact us.

• End Mills

The "NRES435" is a 4-flute radius end mill with a 35/38 degree twist. Thanks to its high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating, it can handle a wide range of materials from general steel to difficult-to-machine materials. It can be used for flat machining, side machining, groove machining, helical machining, ramping, plunging, and contouring. 【Features】 ■ 4-flute radius end mill with a 35/38 degree twist ■ Outstanding vibration resistance due to uneven division and uneven lead ■ High-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating ■ Wide compatibility from general steel to difficult-to-machine materials *For more details, please download the PDF or feel free to contact us.

• Other cutting tools

We would like to introduce the end mills compatible with high hardness material processing that we handle. The 'SWDM650/850' is a carbide multi-flute end mill with 6/8 flutes and a strong 50-degree twist. The 'BBDM230' is a standard ball end mill with 2 flutes and a 30-degree twist. It is suitable for processing high hardness materials up to HRC62 and can be utilized for curved surface machining and engraving. 【Features】 <SWDM650/850> ■ 6/8 flutes, strong 50-degree twist type end mill ■ Suitable for finishing high-feed machining from steel and cast iron to difficult-to-cut materials ■ Precision finishing with minimal chipping ■ Excellent cost performance <BBDM230> ■ Standard ball end mill with 2 flutes and a 30-degree twist ■ Suitable for processing high hardness materials up to HRC62 *For more details, please download the PDF or feel free to contact us.

• End Mills

We would like to introduce the 'BBEM330/430' handled by Giga Selection. This product is a 3-flute/4-flute carbide ball end mill designed for multi-flute applications, allowing for increased feed rates and achieving high-efficiency machining. It can process materials up to HRC52 hardness. Thanks to the ALCrN-based coating, it is suitable not only for mold steel but also for stainless steel and difficult-to-cut materials. 【Features】 ■ Allows for increased feed rates due to its multi-flute design, achieving high-efficiency machining ■ Suitable for mold steel, stainless steel, and difficult-to-cut materials thanks to the ALCrN-based coating ■ Capable of processing materials up to HRC52 hardness *For more details, please download the PDF or feel free to contact us.

• End Mills

The "SAUM345" is a three-flute, 45-degree spiral, pin-end type, three-flute carbide square end mill. With its sharp cutting edge, it offers excellent cutting performance and is expected to provide a clean finish. We offer two types: medium-length flutes and long-neck types. The medium-length flute has a flute length of approximately 2.5D and is suitable for flat machining, side machining, groove machining, helical machining, and ramping. The long-neck type features a longer effective length and is designed for plunge machining as well. 【Features】 ■ Three-flute, 45-degree spiral, pin-end type end mill ■ Non-coated type, suitable for machining non-ferrous metals including aluminum ■ Sharp cutting edge for excellent cutting performance and expected clean finish ■ Available in two types: medium-length flutes and long-neck types *For more details, please download the PDF or feel free to contact us.

• End Mills

The "SQUM440/NQUM440" is an internal lubrication type end mill that ejects coolant from oil holes located on the outer circumference. It is designed to improve chip evacuation, wear resistance, surface finish, and extend tool life. It features excellent vibration resistance due to its uneven pitch and uneven lead. With chip breakers on the outer and bottom cutting edges, chips are shortened, and the smoothly polished grooves allow for smooth chip evacuation. 【Features】 - Coolant is ejected from oil holes on the outer circumference - Improved chip evacuation, wear resistance, and surface finish - Chip breakers on the outer and bottom cutting edges shorten chips - Excellent vibration resistance due to uneven pitch and uneven lead - Smoothly polished grooves allow for smooth chip evacuation *For more details, please download the PDF or feel free to contact us.

• End Mills

■3-blade, 40-degree twist, roughing end mill for non-ferrous metal processing ■Low cutting resistance and quiet machining sound. Minimal workpiece deformation ■Excellent chip evacuation ■Corner sections are rounded, all are neck relief types *For more details, please download the PDF or feel free to contact us.*

• End Mills

The "SFUR230" is a square end mill specialized for resin processing with 2 blades and a 30-degree twist. It is standardized in two types: full-length and long-neck, achieving excellent cost performance. It is suitable for flat machining, side machining, and groove machining. Please feel free to contact us when you need assistance. 【Features】 ■ Square end mill specialized for resin processing with 2 blades and a 30-degree twist ■ Standardized in full-length and long-neck types from φ0.2 to φ6 ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

• End Mills

The "BFUR230" is a ball end mill specialized for resin processing with two blades and a 30-degree twist. We offer two standard types: full-length and long-neck, achieving excellent cost performance. It is suitable for curved surface processing. Please feel free to contact us when you need assistance. 【Features】 ■ Ball end mill specialized for resin processing with two blades and a 30-degree twist ■ Standardized full-length type and long-neck type from R0.1 to R3 ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.

• End Mills

The "DRS Series" is a versatile carbide drill that is suitable for various materials. With its large chip pocket, it demonstrates excellent chip evacuation. The chamfering at the corners reduces burrs on through holes. The straight blade shape enhances cutting edge strength while producing smaller chips. The high K-Value improves the drill's durability, providing outstanding cost performance. 【Features】 ■ Excellent chip evacuation due to the large chip pocket ■ Reduced burrs on through holes due to corner chamfering ■ Easy to re-sharpen blade shape ■ Versatile drill suitable for various materials ■ Outstanding cost performance *For more details, please download the PDF or feel free to contact us.

• drill

The "DRLX" is a carbide long drill with low cutting resistance and minimal load on the spindle. The polished flutes prevent welding and allow for smooth chip evacuation. The large S-shaped chip pocket achieves excellent chip removal performance. The chamfering at the corners prevents breakage and reduces burrs, while the large core thickness ensures rigidity. The double margin improves straightness. 【Features】 ■ Low cutting resistance and minimal load on the spindle ■ Polished flutes prevent welding and allow for smooth chip evacuation ■ Large S-shaped chip pocket achieves excellent chip removal performance ■ Chamfering at the corners prevents breakage and reduces burrs ■ Large core thickness ensures rigidity ■ Double margin improves straightness *For more details, please download the PDF or feel free to contact us.

• drill

■ Achieves seat boring processing in one step with a 180-degree full flat bottom blade. ■ Enables processing that was impossible with conventional drills, such as hole machining on slopes and correction of eccentric holes. It is also expected to reduce burrs in thin plates and tolerance holes. ■ The special corner shape prevents chipping and reduces burrs. ■ By specially treating the surface of the drill bottom's gash area, friction with the workpiece is reduced. ■ The optimized groove design ensures excellent chip evacuation and vibration resistance. *For more details, please download the PDF or feel free to contact us.*

• drill

The reading drill allows for two types of processing: the chamfering process and the pre-drilling hole processing. *For more details, please download the PDF or feel free to contact us.*

• drill

The "GSCHM" is a 4-flute carbide chamfer cutter that can increase feed rates and achieve high-efficiency machining. Its optimized groove shape provides excellent chip evacuation. The cutting resistance is low, and it has a structure that minimizes burr formation. Additionally, the larger top diameter contributes to a high-rigidity chamfer cutter. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves high-efficiency machining with faster feed rates thanks to its 4 flutes ■ Excellent chip evacuation due to optimized groove shape ■ Low cutting resistance and minimal burr formation ■ High-rigidity chamfer cutter with a larger top diameter ■ Suitable for a wide range of materials, from general steel to difficult-to-machine materials and non-ferrous metals *For more details, please download the PDF or feel free to contact us.

• cutter