オーデン Product Lineup

The stickiness and slipperiness of the floors in the factory may be caused by the diffusion and adhesion of oil mist. If left unaddressed, this can lead to an increased risk of slips and falls, a greater cleaning burden, and a deterioration of the working environment. At Oden, we propose environmental improvement solutions that efficiently capture oil mist while optimizing air flow, focusing on the sources of oil mist and high-concentration areas. By collecting the mist before it spreads throughout the factory, we help suppress the adhesion of oil to the floor, contributing to a reduction in stickiness and slip risks. Additionally, this leads to a reduction in odors from oil mist and a decrease in cleaning burdens. We offer optimal improvement methods tailored to the occurrence conditions and layout of each site, ranging from localized measures to wide-area dust collection.

• Air purifiers

Dust and oil mist in the factory not only have a significant impact on manufacturing equipment but also on air conditioning systems. The accumulation of dirt on filters and heat exchangers is one of the factors that can lead to decreased air conditioning efficiency, increased power consumption, and a higher risk of failure. At Oden, we improve the air environment within the factory to suppress the accumulation of dust and oil mist, reducing their adherence to equipment. This contributes to a reduction in maintenance burdens for air conditioning systems and stable operation. In actual implementation cases, there have been instances where reducing mist in the air has led to improved air conditioning efficiency, reduced equipment troubles, and the creation of a comfortable working environment. Why not reconsider the air environment of the entire factory as a countermeasure against troubles caused by increased loads in summer and as part of equipment maintenance strategies?

• Air purifiers

Fumes and smoke generated during the welding process not only deteriorate the working environment but also cause various issues such as poor visibility, unpleasant odors, and decreased air conditioning efficiency. At Oden, we propose optimal welding fume countermeasures tailored to the scale of the factory, equipment layout, and work content. We offer a wide range of solutions, from local exhaust systems that efficiently capture emissions near the source to wide-area dust collection systems that improve the overall air environment of the factory. We select the most suitable method based on the specific challenges of each site, supporting the creation of a comfortable and safe working environment. We recommend our services to companies considering measures against visibility issues and odors caused by smoke, as well as improvements to the working environment. Based on on-site surveys and interviews, we will propose the best improvement plan.

• Air purifiers

As securing talent and improving retention rates become important issues, factory facilities are required not only to enhance productivity but also to create a comfortable working environment. At Oden, we propose a "wide-area dust collection system" to optimize the airflow throughout the factory in response to the deterioration of air quality caused by oil mist and welding fumes. By combining local exhaust with wide-area dust collection, we efficiently reduce mist and odors that linger in the factory. The improvement of air quality contributes to the comfort and safety of workers. In actual sites where our system has been implemented, improvements such as reduced stickiness throughout the factory, decreased odors, and lowered slip risks have been confirmed, helping to create a more comfortable workplace environment. In the current climate of intensified recruitment competition, improving factory environments is an important initiative that also leads to enhanced corporate value.

• Air purifiers

Measures against oil mist in factories are important for improving the working environment and maintaining equipment, but making improvements across the entire factory at once may require significant investment. At Oden, we propose a "partial introduction type oil mist countermeasure" focused on areas with high mist concentration and significant impact on workers. By optimizing the airflow around the source of generation, we can efficiently capture oil mist before it spreads throughout the factory. This allows for gradual environmental improvements while confirming effectiveness with limited investment. It contributes to reducing floor stickiness, lowering cleaning burdens, and creating a comfortable and safe working environment. We will propose the most suitable plan tailored to the site conditions and your budget.

• Air purifiers

Mold growth in factories can be caused not only by humidity but also by "air stagnation" and the "accumulation of oil mist and dust." At Oden, we support the creation of a comfortable working environment by combining measures to prevent humidity and heat stagnation through air circulation in the factory with oil mist collection systems to address the source of the problem. By suppressing the adhesion of oil to walls and equipment, we contribute to improving environments that are prone to mold growth. Additionally, measures against humidity are expected to be effective in preventing rust and discoloration of processed products. Leveraging our track record with major domestic manufacturers, we provide optimal improvement proposals tailored to our customers' factory environments.

• Air purifiers

The thermal aerosol fire extinguishing device "OFS-0315" is a compact, automatic fire extinguishing system designed to respond to initial fires occurring in enclosed spaces such as control panels, distribution boards, and server racks. It automatically activates upon detecting heat and sprays thermal aerosol to suppress the fire in its early stages. It does not require cylinders, piping, or external power sources, making it suitable for retrofitting to existing equipment. Since it does not use water or foam, it minimizes damage to precision equipment and the impact of equipment downtime while enhancing fire prevention measures. This new initial fire extinguishing solution contributes to the stable operation of facilities and business continuity (BCP) measures in factories, buildings, offices, communication equipment, and infrastructure facilities.

• others

The "TZ4000" is a ceiling-mounted air purifier. It draws in dirty air from the bottom of the unit and blows out clean air from the sides in two directions. Because the air can reach far, it improves the overall air circulation in the room, enhancing the purification effect. It features an ultra-thin design with a ceiling installation dimension of 20 cm, allowing it to be embedded in narrow ceiling spaces. It can accommodate areas where there is limited space for other equipment to be installed in the ceiling. [Features] - Adopts a horizontal blowing mechanism with high air circulation efficiency - Ultra-thin design with a ceiling installation dimension of 20 cm, suitable for narrow ceiling spaces *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Oil Mist Collector
• Dust collector

The HG311 is a factory air purifier with a processing air volume of 30m³/min. It is equipped with two dust collection units measuring 360mm square. It offers a wide-area type that cleans the entire factory and a local type that directly connects to areas with high dust levels or draws in dust through hoods. The dust collection method employs a needle discharge system. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Model: HG311 (wide area) ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing air volume: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust collection method: Needle discharge system ■ Installation method: Ceiling-mounted (shelf placement also available) *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The "HG311D" is a factory air purifier suitable for direct connection and local applications. It can be used as a localized unit that directly connects to areas with high dust levels or draws in dust through a hood. Equipped with two dust collection units measuring 360mm on each side, it achieves an airflow rate of 30m³/min. The airflow adjustment adopts a non-contact, stepless method, and the installation type is ceiling-mounted (shelf placement is also possible). 【Specifications (partial)】 ■ Model: HG311D ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing airflow: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

We would like to introduce our factory air purifier 'HG321'. The number of dust collection units has been increased to four, achieving a high dust collection type. It is suitable for cleaning the entire factory as a wide-area application. The dust collection method employs a needle discharge system, and the airflow adjustment is a contactless, stepless method. The installation type is ceiling-mounted (shelf placement is also possible). 【Specifications (partial)】 ■ Model: HG321 ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 360W (60Hz) ■ Processing airflow: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Airflow adjustment: Contactless, stepless ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

We would like to introduce our factory air purifier 'HG321D'. By increasing the number of dust collection units from the HG311 to four, we have achieved a high-efficiency dust collection type. It can be used as a local type that directly connects to areas with high dust levels or draws in dust through a hood. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG321D ■ Power Supply: AC200V (single phase) ■ Power Consumption: 260W (50Hz) / 360W (60Hz) ■ Airflow Rate: 29m³/min (50Hz) / 33m³/min (60Hz) ■ Dust Collection Method: Needle discharge system *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

In the automotive industry, oil mist generated during processes such as cutting and grinding of automotive parts is one of the factors that affect the working environment and equipment condition. Fine mist spreads within the factory and adheres to equipment and floors as oil, leading to equipment contamination and deterioration of the working environment. The HG511 efficiently collects oil mist generated during processing with an airflow capacity of 50m³/min, contributing to the improvement of the factory environment. This supports the maintenance of a stable production environment and enhances manufacturing efficiency. 【Usage Scenarios】 - Cutting processing - Lathe processing - Machining center processing - Milling processing - Honing processing - Polishing processes - Press processing - Other processes where oil mist is generated 【Benefits of Implementation】 - Improvement of the working environment - Protection of employee health - Enhancement of manufacturing efficiency - Reduction of cleaning and maintenance burden

• Air purifiers
• Air purifiers
• Air purifiers

In the machine tool industry, the impact of oil mist on the interior of machines is a significant factor that leads to machine failures and performance degradation, ultimately shortening their lifespan. Oil mist can promote wear on sliding parts and potentially reduce the precision of precision components. The HG511 oil mist collector addresses these issues and contributes to the stable operation and longevity of machine tools. 【Usage Scenarios】 - Around machine tools - Environments with high oil mist generation - Reduction of machine maintenance costs 【Effects of Implementation】 - Reduced risk of machine failure - Extended maintenance cycles - Increased productivity - Reduced running costs

• Air purifiers
• Air purifiers
• Air purifiers

In the metal processing industry, measures against airborne substances such as oil mist and welding fumes are essential to protect the health and safety of workers. These substances can potentially cause respiratory diseases and health issues. The HG511 purifies the air throughout the factory with an airflow rate of 50m³/min, improving the working environment. It employs a needle discharge method to efficiently capture fine particles. This helps protect the health of workers and creates a safe workplace environment. 【Usage Scenarios】 - Metal processing factories - Polishing work sites - Cutting processing sites 【Benefits of Implementation】 - Reduced risk of health issues for workers - Improved working environment - Increased productivity

• Air purifiers
• Air purifiers
• Air purifiers

The HG511 is an industrial air purifier equipped with two dust collection units measuring 470mm square. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. Its applications are the same as those of the HG311, but it meets a wider range of needs. It is well-suited for cleaning the entire factory as a broad-area application. The dust collection method employs a needle discharge system. 【Specifications (partial)】 ■ Model: HG511 ■ Power supply: 3-phase AC200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Airflow rate: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge system *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The HG511D is a factory air purifier suitable for direct connection and local applications. As a higher model than the HG311, it achieves an airflow rate of 50m³/min. It is equipped with two dust collection units measuring 470mm on each side. It can be used as a local type that directly connects to areas with high dust levels or draws in dust through hoods. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Model: HG511D ■ Power supply: 3-phase AC 200V (50/60Hz) ■ Power consumption: 370W (50Hz) / 500W (60Hz) ■ Processing airflow: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

We would like to introduce our factory air purifier 'HG522D' that we handle. The number of dust collection units has been increased to four compared to the HG511D, achieving a high dust collection type. It is suitable for dust collection in areas with a high amount of dust for direct connection and localized applications. The airflow adjustment adopts an inverter type, and the dust collection method is a needle discharge type. 【Specifications (partial)】 ■ Model: HG522D ■ Power supply: 3-phase AC 200V (50/60Hz) ■ Power consumption: 380W ■ Processing airflow: 45m³/min (50Hz) / 55m³/min (60Hz) ■ Airflow adjustment: Yes (inverter type) ■ Dust collection method: Needle discharge type *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

In the automotive industry, oil mist generated during processes such as cutting and grinding of automotive parts is one of the factors that can affect the working environment and equipment condition. Fine mist can spread throughout the factory and adhere to equipment and floor surfaces as oil, leading to equipment contamination and deterioration of the working environment. The HG220 oil mist collector addresses these issues and supports the manufacturing of high-quality products. 【Application Scenarios】 - Cutting processing - Lathe processing - Machining center processing - Milling processing - Honing processing - Polishing processes - Press processing - Other processes where oil mist is generated 【Benefits of Implementation】 - Improvement of the working environment - Protection of employee health - Increased manufacturing efficiency - Reduction of cleaning and maintenance burden

• Air purifiers
• Air purifiers
• Air purifiers

In the metal processing industry, oil mist and dust generated by cutting oils and polishing can lead to a deterioration of the working environment and pose health risks to employees. These airborne substances can also cause a decline in product quality and equipment failure. The HG220 oil mist collector efficiently removes oil mist and dust from the factory using high static pressure and a needle discharge method, providing a clean environment. 【Usage Scenarios】 - Metal processing factories - Sites where cutting and polishing operations are performed - Areas where measures against oil mist and dust are necessary 【Benefits of Implementation】 - Improvement of the working environment - Protection of employee health - Enhancement of product quality - Prolonged equipment lifespan

• Air purifiers
• Air purifiers
• Air purifiers

In the machine tool industry, it is important to address oil mist and dust to maintain the precise operation of machines and achieve long-term operation. These airborne substances can infiltrate the interior of machines, potentially causing wear and failure of components. As a result, this can lead to a decrease in machine performance and a reduction in lifespan, making appropriate measures necessary. The HG220 addresses these issues and contributes to the stable operation of machine tools. 【Usage Scenarios】 * Around machine tools * Sources of oil mist and dust * Want to extend the lifespan of machines 【Benefits of Implementation】 * Reduces the risk of machine failure * Lowers maintenance costs * Improves machine operating rates

• Air purifiers
• Air purifiers
• Air purifiers

The "HG220" is an air purifier designed for direct connection or local use with a φ200 duct. It has high static pressure and effectively cleans oil mist and dust in factories with greater power. It is suitable for direct and local applications. Airflow adjustment can be made in five stages, and it employs a needle discharge method for dust collection. 【Specifications (partial)】 ■ Model: HG220 ■ Power supply: AC200V (single phase) ■ Power consumption: 300W ■ Processing airflow: 22m³/min ■ Airflow adjustment: 5-stage adjustment ■ Dust collection method: Needle discharge method *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The HG122 is an air purifier that connects to a φ150 duct for direct connection or local use. In addition to its application as an oil mist collector directly connected to machine tools, it can also be used as a local dust collector for fine particulate matter. The dust collection method employs a needle discharge system, and the installation method is a stand-alone type. 【Specifications (partial)】 ■ Model: HG122 ■ Power Supply: AC200V (single phase) ■ Power Consumption: 210W (50Hz) / 310W (60Hz) ■ Airflow Rate: 11m³/min (50Hz) / 12m³/min (60Hz) ■ Dust Collection Method: Needle discharge system *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The "SN3110" is a deodorizer that is useful for odor control from organic solvents and other sources. It features a compact design that uses four cassettes containing granular activated carbon. It is suitable for deodorizing entire factories as a wide-area application. The deodorization method employs an activated carbon filter, and the airflow adjustment is a contactless, stepless system. 【Specifications (partial)】 ■ Model: SN3110 ■ Power supply: AC200V (single phase) ■ Power consumption: 260W (50Hz) / 370W (60Hz) ■ Processing airflow: 18m³/min (50Hz) / 22m³/min (60Hz) ■ Deodorization method: Activated carbon filter *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The "SN3110D" is a deodorizer suitable for direct connection and localized applications. It features a compact design using four cassettes that contain granular activated carbon. It is effective for odor control of organic solvents and more. The deodorization method employs an activated carbon filter, and the airflow adjustment is a non-contact, stepless system. 【Specifications (partial)】 ■ Model: SN3110D ■ Power supply: AC200V (single phase) ■ Power consumption: 185W (50Hz) / 235W (60Hz) ■ Deodorization method: Activated carbon filter ■ Dimensions (with the air inlet at the front): 803mm width × 775mm depth × 450mm height *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

We would like to introduce a case study on oil mist countermeasures in a product assembly factory. We installed 20 units of "HG511" to improve the air quality within the factory. Before the measures were implemented, there were extensive areas with mist concentrations exceeding 0.5mg/m3. After the measures were taken, we successfully reduced the mist concentration significantly throughout the entire factory. To maintain the original air purification capability, regular maintenance, such as cleaning the dirt accumulated on the dust collection units, is essential. [Installed Equipment] ■ 20 units of HG511 installed *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

We would like to introduce a case where 16 units of the wide-area dust collector (push-pull type) "HG511" were installed at ISS Yamazaki Machinery Co., Ltd. Previously, a direct-connected dust collector was installed for environmental measures, but there continued to be issues with oil mist not being completely removed. Additionally, the occurrence of unpleasant odors was also a concern. With the desire to "improve the working environment for employees," we reviewed the environmental measures within the workplace and decided to introduce this product, which circulates and purifies the air in the factory using a wide-area dust collector (push-pull type). 【Case Overview】 ■ Equipment Introduced: 16 units of HG511 ■ Challenges: - The direct-connected dust collector was unable to completely remove oil mist. - The occurrence of unpleasant odors was also a concern. ■ Purpose of Introduction: Improvement of the working environment for employees. *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers

The "TZ4000" is a ceiling-mounted air purifier. It draws in dirty air from the bottom of the unit and blows out clean air from two directions on the sides. Because the air can reach far, it improves the overall air circulation in the room, enhancing the purification effect. It features an ultra-thin design with a ceiling installation dimension of 20 cm, allowing it to be embedded in narrow ceiling spaces. It can accommodate areas where there is limited space for other equipment to be installed in the ceiling. 【Features】 ■ Adopts a horizontal blowing mechanism with high air circulation efficiency ■ Ultra-thin design with a ceiling installation dimension of 20 cm, suitable for narrow ceiling spaces *For more details, please download the PDF or feel free to contact us.

• Air purifiers
• Air purifiers
• Air purifiers