ハルツォク・ジャパン List of Products and Services

Fully Automatic Micronization Device HP-MA ◆◇◆Features◆◇◆ ◆Fully automatic micronization device for XRF analysis sample preparation. ◆Automatic processing from sample input, micronization, sample recovery, to internal cleaning of the device. ◆Operating programs can be registered for each sample, allowing for highly reproducible micronization under optimal conditions. ◆Automation connection with pneumatic pipes, fully automatic pressing devices, XRF analysis devices, etc., is also possible. *The catalog also includes the fully automatic pressing device (HP-PA).

• X-ray fluorescence analyzer
• Fine grinding machine
• Other powder equipment

◆◇◆Features◆◇◆ ◆Fully automatic press device for XRF analysis sample preparation. ◆With PLC control, programs can be stored in memory, allowing for precise control of pressurization time, pressure holding time, and depressurization time, resulting in a smooth pressing surface and high reproducibility. ◆Fully automated processing from sample loading, pressing, sample recovery, to internal cleaning of the device. ◆Thorough contamination prevention measures. ◆Operating programs can be registered for each sample, enabling the production of highly reproducible presses under optimal conditions. ◆Automation connections with pneumatic pipes, fully automatic fine grinding devices, XRF analysis devices, etc., are also possible. *The catalog also includes the fully automatic fine grinding device (HP-MA).

• X-ray fluorescence analyzer
• Fine grinding machine
• Other powder equipment

It is a pneumatic transport system for transporting samples from the manufacturing site to the analysis room, and it is possible to fully automate the entire process from sampling to pneumatic transport, pretreatment, and analysis through a combination of equipment. By placing samples in the pneumatic transport capsule (sample transport capsule) in all systems and performing pneumatic transport, operation without troubles (without clogs) is possible. Of course, it can also be used solely for pneumatic transport, with two types of transport methods available: blower type and compressor air type.

• X-ray fluorescence analyzer
• Spectroscopic Analysis Equipment
• Analytical Equipment and Devices

This is a fully automatic two-stage cutting device compatible with various non-ferrous samples. It is equipped with two headers for rough cutting and finishing cutting, and with options, cutting and machining processes are also possible. It can be operated fully automatically and unmanned when combined with analytical devices and handling robots.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

This is a fully automatic cutting device compatible with various steel samples. It can accommodate up to four cutting heads, allowing for automatic cutting processing by changing cutting parameters and cutting heads for each sample. Compared to conventional polishing, it enables the creation of more stable analysis surfaces and prevents contamination. Since dust collection devices and cooling water are not required, the working environment can also be kept clean. It is also possible to achieve fully automatic operation without human intervention by combining it with analysis devices and handling robots.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

This is a semi-automatic belt grinding machine designed for various steel samples. By simply placing the sample in the designated position and pressing the start button, it performs a complete cycle of automatic operation. It is a safe device that does not require the operator to touch the machine while it is in operation. The sample moves back and forth in a direction perpendicular to the belt rotation for grinding, and by utilizing not only the center of the belt but also both ends, it contributes to reducing running costs. Since the sample holding pressure and the number of sample reciprocations can be set arbitrarily, it is possible to change the conditions based on the material of the sample and the state of the belt.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

The milling head is equipped with six cutting blades, ensuring a safe and quick finish with a flat and consistently uniform analysis surface. ◆◇◆ Features ◆◇◆ ◆ High Reproducibility Semi-automatic operation results in uniform finishing without individual differences. ◆ Super Clean Can be installed next to the analytical device. ◆ Easy Operation Sample set ⇒ Cutting amount setting ⇒ Start ◆ Safety The cutting chamber door is fully locked during operation.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

This is a fully automated device designed for bomb-shaped steel samples. It features a two-stage cutting mechanism that extracts samples for optical emission spectrometry (OES) analysis and gas analysis, as well as a punching function for gas analysis samples. By connecting the fully automated cutting device HS-F1000 at the rear, complete automation of optical emission analysis and gas analysis is possible. In the cutting process, both the chuck that grips the sample and the cutting wheel rotate, preventing burning on the cutting surface and allowing for rapid cutting without burrs. Gas analysis samples are punched after high-frequency heating, and are transported to any desired location, such as analysis devices or magazines, via a dedicated air transport pipe.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

This is a fully automated bead production device that performs everything from weighing the sample, flux (flux agent), and release agent, to bead creation, pouring into molds, and cleaning and drying of platinum crucibles. By providing separate crucibles for melting and casting dishes for creating analytical surfaces, the frequency of re-casting platinum products (i.e., running costs) is significantly reduced. Data remains in the control PC, allowing for verification of the preparation history of each sample. It is also possible to connect fully automatically with pneumatic transport systems for sample transport from the site, X-ray fluorescence analysis devices, and handling robots.

• X-ray fluorescence analyzer

This is a semi-automatic glass bead device that can set up to 16 platinum crucibles containing weighed samples and automatically perform melting and casting processes. Once the crucibles are set, no further work is required until all beads are completed. By providing separate crucibles for melting and casting dishes for creating analytical surfaces, the frequency of remelting platinum products (i.e., running costs) is significantly reduced. Data is retained within the control PC, allowing for verification of the preparation history of each sample. It is also possible to connect fully automatically with a fluorescent X-ray analysis device.

• X-ray fluorescence analyzer

Paper Zero 04 is primarily made from plant-based paper. It is a product that helps reduce CO2 emissions during manufacturing and disposal, contributing to measures against global warming. Additionally, it does not generate dust, odors, or toxic gases, allowing operators to handle it safely and providing a stress-free working environment. 【Features】 ◆ After shaping, it can be treated as paper waste and disposed of as combustible garbage. ◆ No dust is generated. ◆ There is no odor specific to resins. ◆ No toxic gases such as formaldehyde are emitted during embedding. ◆ It creates a safe workplace environment even in places where ventilation is not possible. ◆ It is crushable, allowing for the retrieval of embedded samples. ◆ It has good compatibility with epoxy resins and can also be used as a filler. ◆ Work efficiency will undoubtedly increase. ◆ It contributes to CO2 reduction. ☆ Free samples are currently being distributed. Please feel free to contact us!

• Repair Agent
• Other consumables
• Electron microscope

◆◇◆Features◆◇◆ ◆Crushing device equipped with a standard 100cc and an optional 250cc crushing container ◆Achieves reduced crushing time and improved durability ◆Portable vessel and easy-to-use control panel ◆Can store 16 crushing programs for each sample ◆High reproducibility through PLC control ◆Compatible with a wide range of samples

• Fine grinding machine

This is a fine grinding device for small sample amounts, equipped with a standard 50cc grinding container and an optional 10cc grinding container.

• Fine grinding machine

In addition to the steel ring method, aluminum cups and free press methods are also possible. ◆ Simple operation by just pressing the start button after setting the sample. ◆ Semi-automatic operation for one cycle at the set pressure (up to 20 tons). ◆ A safety lock is activated during operation, preventing contact with moving parts.

• X-ray fluorescence analyzer

Equipped with a NaI(Tl) scintillation detector, it amplifies the weak light emitted from the scintillator using a photomultiplier tube and converts it into an electrical signal to measure radiation. It is capable of detecting radioactive contaminants that emit gamma rays with energies ranging from 50 keV to 2000 keV, with a detection limit of 0.02 Bq/g (Co-60 equivalent) or better for steel samples under normal environmental radiation levels with a measurement time of 30 seconds. The detector and sample chamber are shielded by a 70 mm thick lead box, which blocks environmental radiation (gamma rays) and allows for high-precision measurement of the sample's inherent radioactivity. Additionally, after startup, it continuously measures the background radiation, accommodating fluctuations in the operating environment. Not only manual measurements but also integration into an automated robotic circle connected to a master PC via TCP/IP communication is possible. - NaI(Tl) scintillation detector - Capable of measuring approximately 0.02 Bq/g Co60-eq - Automation is possible through connection with automated robots - Software reflecting the half-life of standard samples - Data transfer to higher systems is possible - Compatible with a wide range of samples including steel, non-ferrous metals (copper, aluminum), and food.

• Radiation detector

For rough grinding and surface finishing of steel, non-ferrous metals, substrates, resins, etc. It can be used as a substitute for SiC grinding paper. 【Features】 ○ It does not fall under the Labor Safety and Health Act, so there is no hassle of maintaining 30 years of work records. ○ Abrasive grain sizes are available from #80 to #1200. ○ The diameter sizes are as follows: ・φ200mm ・φ203mm ・φ223mm ・φ250mm ・φ300mm ・φ305mm ○ Various options are available, both non-adhesive and adhesive.

• Hand polishing and filing
• Steel
• Optical microscope

Diamond abrasives are widely used in sample grinding. While having a variety of types is an advantage, it can feel like a disadvantage for those who are not familiar with grinding. Each time we receive inquiries about what to choose, we have been explaining verbally, but it often doesn't get communicated effectively. Therefore, we have created a simple explanatory document on how to differentiate between them, which we hope will be helpful. <Contents> - Differences between spray, slurry, and paste - Differences in abrasive grain shapes - Advantages and disadvantages of each - Recommended usage methods - Comparison table and more. *If you would like to know more details, please feel free to contact us.

• Hand polishing and filing
• Other consumables
• Optical microscope

If you're struggling to remove cold epoxy resin from embedded cups, this is a must-see! <Features> - Excellent release from epoxy resin, allowing for easy removal of cured resin - Reusable and economical - Clear visibility from the sides - Reduces working time ☆You can now purchase it on Amazon! (Link below)

• Other electronic parts
• Other metal materials
• Other Auto Parts

"BeadOneR" is a glass bead production device that employs a temperature-stable electric furnace using a melting method, eliminating the need for utilities other than the power supply (such as compressed air and cooling water). By heating and stirring pre-weighed samples, flux, and release agents in a platinum crucible, and then transferring them to a platinum casting dish after degassing, it is possible to safely and automatically produce excellent glass beads with a flat surface condition. Furthermore, by adopting this melting and casting method, the frequency of remelting the platinum crucible is significantly reduced, allowing for easy retrieval of uniform glass bead samples from the platinum casting dish. 【Features】 ■ Flexibility in analysis ■ Resistance heating furnace (maximum temperature: approximately 1350°C) ■ User interface ■ Magazine (optional) ■ Safety *For more details, please download the PDF or contact us.

• Other machine tools
• Casting Machine

It is now possible to cut sizes that were previously difficult, such as gears and crankshafts for heat treatment, as well as castings made of aluminum and other materials. 【Features】 〇 Samples can be cut up to Φ225mm or 100H x 500D mm. 〇 The cutting chamber and motor section are separated, allowing for long-term use. 〇 Designed with safety in mind, it can be used with peace of mind. 〇 Each axis can be intuitively operated with a joystick. 〇 The X-axis (horizontal axis) moves the grinding wheel instead of the table, making it easier to adjust the cutting position. 〇 A rotating table feature has been newly added, enabling 4-axis multi-cutting. 〇 Various cuts can be made from different directions with a single clamp.

• Plastic processing machines (cutting and rolling)
• Other machine tools
• Steel

We offer two types of epoxy resin. Free samples will be sent along with the hardener (non-toxic). Please contact us if you are interested. <HERZOG EPO> This is an epoxy base resin designed with optimal hardness, adhesion, transparency, and shrinkage for embedding and polishing samples. <HERZOG EPO Low Viscosity> This is a low viscosity type of epoxy base resin. It easily penetrates gaps in samples and is suitable for complex shapes. It also produces minimal bubbles. ☆You can also purchase it on Amazon. Please check the link below.

• Repair Agent
• Other consumables

This is a spray-type diamond polishing material. Just spray it onto the buff with a "shoo!" It is the polishing agent that shows the least individual variation. Since it contains almost no extra components other than abrasive particles, the wastewater generated during polishing is very minimal, making it an environmentally friendly polishing material. If you have experienced clogged drainage hoses or pipes with alumina polishing agents, the diamond spray is recommended. Additionally, since the abrasive particles do not flow easily like alumina polishing agents or slurry polishing materials, there is no need to repeatedly add polishing material during the polishing process. It is an easier-to-use version of paste polishing materials. 【Features】 〇 A wide variety of sizes (μ) and types (single crystal, polycrystalline, natural) are available. 〇 Anyone can apply it evenly without any unevenness. 〇 It stays firmly on the buff and can be used for a long time. 〇 It contains almost only diamond abrasive particles, so it does not dirty the polishing machine. ★ It is also available for purchase on Amazon. Please check the link below.

• Other abrasives
• Hand polishing and filing
• Other consumables

This is a precision cutting machine that is precisely assembled with a sturdy body that is strong against vibrations and capable of stable cutting. It comes with many options and accessories, allowing you to choose according to your intended use. We have demo machines available, so please feel free to contact us if you would like a demonstration. Online demonstrations or demonstrations brought to your company are also possible. 【Features】 - It can accommodate grinding wheels and discs up to φ200mm. - The cover of the cutting chamber features a highly safe horizontal sliding door with a safety lock. - It performs automatic cutting through program control.

• Plastic processing machines (cutting and rolling)
• bolt
• Steel

We have a demo unit available, so please contact us if you would like to request a demonstration. We can also bring the demo to your company. ■FORCIPOL This is the base unit for polishing machines. You can choose between a single-axis and a dual-axis polishing stage. ■FORCIMAT By connecting to FORCIPOL, it can be used as an automatic polishing machine. If you only need individual load use, please choose FORCIMAT-52. If you also need to use total load, please choose FORCIMAT-102. ■DOSIMAT It can automatically supply polishing materials and lubricants. By accurately controlling the drop amount, the reproducibility of difficult buff polishing is improved. <Features> ● The base unit FORCIPOL has a stable chassis design that enables precise polishing. ● The head unit FORCIMAT offers a variety of sample holders and options. Custom manufacturing is also possible. ● The head can move laterally, so if it is moved outside the base, it will not interfere during manual polishing. ● The automatic feeder DOSIMAT can manage the precise drop amount through program control. ● It is also possible to modify existing machines to automatic specifications as an add-on.

• Capacitor
• Steel
• Electron microscope

This is a versatile metal cutting machine capable of cutting materials from metals, non-ferrous metals, and steel to ceramics and electronic materials. It can accommodate cutting wheels up to φ305 mm. Online demonstrations and on-site demonstrations are available, so please feel free to contact us if you are interested. 【Features】 ● Capable of meeting a wide range of customer needs from manual cutting to fully automatic cutting. ● Rapid pulse operation suppresses clogging and heat generation. ● Supports continuous cutting of slices. ● Automatic control of feed speed through overload detection function. ● Highly customizable to create a cutting machine tailored to your preferences. ● Many options available, including laser units and mist collectors. *For more details, please refer to the catalog.

• Other processing machines
• Other machine tools
• Optical microscope

It is suitable for cutting slightly larger metal materials. For example, if you are currently cutting samples in two stages but would like to reduce labor by cutting them in one go, please check this out. 【Features】 〇 It has ample specifications for a medium-sized cutting machine class. 〇 The cutting chamber and motor section are separated, making it durable for long-term use. 〇 Designed with safety in mind, allowing you to use it with peace of mind. 〇 Recommended for those who are struggling with sample cutting using their current cutting machines.

• Plastic processing machines (cutting and rolling)
• Other machine tools
• Special Steel

You can set large parts such as gears, crankshafts, cams, and castings directly on the table and cut them in one go. <Features> - Capable of cutting and extracting large samples - The cutting chamber and motor section are separated, allowing for long-term use - Designed with safety in mind, ensuring peace of mind during use - Each axis can be intuitively operated with a joystick - Excellent cost performance

• Plastic processing machines (cutting and rolling)
• Other processing machines
• Other machine tools

【Features】 ● It is an impregnation device with a simple structure and easy operation. ● Since it does not use a vacuum pump, it is cost-effective and space-saving. ● The adhesion between the sample and the resin is improved. ● It is ideal for impregnating electronic components, ceramics, minerals, metals, etc. *For more details, please contact "Request for Information."

• Capacitor
• Circuit Board Inspection Equipment
• Ceramics

It precisely cuts small samples such as substrates, ceramics, rocks, and non-ferrous metals. It is the smallest precision cutting machine in its class. It is portable and does not take up much space. 【Features】 - Since cutting is done with the weight of a balancer, it minimizes sample distortion. - The lateral movement of the sample can be adjusted to an accurate distance using a micrometer. - Various vices can clamp both small samples and samples with complex shapes. - It is a tabletop cutting machine that is compact and space-saving. *For more details, please request materials or download the catalog.

• Plastic processing machines (cutting and rolling)
• Other machine tools
• Capacitor

This is a manual cutting machine that minimizes functions other than the cutting mechanism, allowing for high-quality precision cutting with a simple structure. It offers excellent cost performance and does not take up much space. We have a demo machine available, so please feel free to contact us if you would like a demonstration. Online demos or demos brought to your company are also possible. 【Features】 ■ Cutting starts with just an ON/OFF operation. ■ The interlock safety device ensures that the motor does not start until the hood is closed, and the hood cannot be opened until the motor stops, providing a safety specification. ■ Long pipes can also be accommodated by opening the side window. ■ The one-touch clamp is secured simply by lowering the lever. ● For more details, please request materials or download the catalog.

• Plastic processing machines (cutting and rolling)
• Other processing machines
• Other machine tools

Pioneers in sample preparation! Leave it to HERZOG >>> Bead Sampler with Transfer Function - High Frequency Heating <Bead One HF> Introducing a tabletop bead sampler equipped with HERZOG's unique transfer function. We have achieved the highest quality in safety, reproducibility, and reliability. >> Features << ● Safety measures (Fully automated process from melting to pouring to cooling without operator intervention) ● Temperature control (High-frequency output automatically controlled by a radiation thermometer) ● Ultimate stirring performance (Quick melting through unique inclined oscillation) ● Long-term stabilization of the analysis surface (Stable analysis surface management through unique pouring function) ● Reduction of remelting costs (Transfer function lowers the remelting costs of crucibles and pouring dishes) ● Reproducibility for each sample (16 types of melting programs can be set) ● Various optional functions Please refer to the catalog for more details.

• X-ray fluorescence analyzer

●Crushing device ●Crushing press device ●Melting device (glass bead creation) ●Press device ●Cutting and machining device (steel) ●Coarse crushing device (with weighing and splitting mechanism) ●Machining device (non-ferrous) ●Cutting device (steel) ●Pneumatic conveying system ●Polishing device ●Automation system

• Other physicochemical equipment
• X-ray fluorescence analyzer
• Spectroscopic Analysis Equipment

◆◇◆Features◆◇◆ ◆This model is equipped with both fine grinding and pressing functions in a single device. ◆It also includes a sample recovery mechanism after grinding, an automatic cleaning mechanism, and a sample discharge mechanism after pressing. ◆The operating program can be registered for each sample, allowing for the production of high-quality pressed samples while saving space. ◆Many options available, including sample magazines.

• Fine grinding machine

After the sample is loaded, crushing, sample recovery, and internal cleaning of the device are performed automatically. Operating parameters can also be registered for each sample. ◆◇◆Features◆◇◆ ◆ Achieves reduced crushing time and improved durability ◆ Easy operation with low power consumption ◆ Automatic cleaning function for the crushing vessel ◆ High reproducibility ensured by program control ◆ Compatible with a wide range of samples

• Fine grinding machine

With PLC control, programs can be stored in memory, allowing for precise control of the press's pressure increase time, pressure holding time, and pressure decrease time, resulting in a smooth pressing surface and high reproducibility. In addition to the steel ring method, aluminum cups and free press methods are also possible. ◆ Advanced control for press molding ◆ Easy operability ◆ Options If the steel ring method is selected, a cleaning mechanism for the steel ring can be installed on the side of the device. ● Manual steel ring cleaning mechanism ● Automatic steel ring cleaning mechanism (compressed air is required only for the automatic option)

• X-ray fluorescence analyzer

Samples suitable for X-ray analysis with high uniformity and reproducibility can be prepared.

• Hydraulic Equipment

Automatically measures the brain value, which serves as a guideline for powder particle size measurement.

• Other measurement, recording and measuring instruments

It accommodates various shapes of samples with a diameter of up to 70mm. It uses a milling head with seven cutting edges to finish a flat and consistently uniform analysis surface safely and quickly. ◆◇◆ Features ◆◇◆ ◆ High Reproducibility Semi-automatic operation ensures consistent results without individual differences. Alcohol spray allows for a more stable cutting surface and prevents contamination. ◆ Super Clean Can be installed next to the analytical device. ◆ Easy Operation Sample set ⇒ Cutting amount and feed speed settings ⇒ Start. ◆ Safety The operator completely locks the cutting chamber door.

• Other machine tools
• Spectroscopic Analysis Equipment
• X-ray fluorescence analyzer

Grinding devices with whetstones and belts are available in a wide range, from manual types to automatic types.

• Wafer processing/polishing equipment

◆ Fully automated processing from sample input to crushing, sample recovery, and internal cleaning of the device. ◆ Equipped with a large-capacity crushing vessel of 1500cc. ◆ Up to 16 different operating parameters can be registered. ◆ Continuous processing is possible with an optional sample magazine. ◆ Numerous cleaning options to prevent contamination.

• Fine grinding machine

Equipped with a Japanese language control panel!

• Fine grinding machine