グローバル電子 Product Lineup

The "DLO-M2/DLO-M2_ex" is a sensor for measuring the concentration of liquids and gases. The "DLO-M2_ex" model has excellent explosion-proof performance and is capable of measuring methane and propane gas (flammable gases). The sensor size is 30×66×15mm (excluding cable and cable gland), and it weighs less than 200g, allowing it to be installed in various locations, including narrow spaces. 【Features】 ■ Maximum measurement deviation (options available depending on density and temperature values) - Density: ±0.5kg/m3 - Temperature: ±0.3℃ ■ Allowable measurement range - Density: 0–1,600kg/dm3 - Temperature: -40–60℃ *For more details, please download the PDF (English version) or feel free to contact us.

The "CozIR-LP3" is a fast-response, ultra-low power CO2 sensor using NDIR technology. It offers a choice of UART or I2C control interfaces and provides both digital and analog outputs. Additionally, it features onboard power management capabilities that can reduce the sensor's power consumption (less than 3.0μW) when inactive. 【Features】 ■ Equipped with onboard power management capabilities ■ Can reduce sensor power consumption when inactive ■ Has an automatic calibration function ■ Can operate for extended periods without user intervention, even in space-constrained applications *For more details, please download the PDF (English version) or feel free to contact us.

The "SSA/SDD Series" is a shunt resistor-type current sensor manufactured by Bourns. The SSD series supports digital signal output, while the SSA series supports analog signal output. Additionally, both series enable high-precision current detection and are equipped with reinforced insulation of 1500VDC. 【Features】 ■ High-precision current detection ■ Reinforced insulation of 1500VDC ■ Strong against external magnetic fields ■ No shunt resistor required *For more details, please download the PDF (English version) or feel free to contact us.

The "RedRock RR123-1H02-612" is a magnetic sensor/switch that boasts ultra-low power consumption (average 20nA). With high-efficiency switching (Rds(on) = 5Ω, maximum 20mA) and an output latch function, it achieves stable power supply and prevents malfunction. Furthermore, its high magnetic sensitivity, operating at just 7 gauss of magnetic flux density, allows for the use of small, low-cost magnets, and it supports space-saving design with a compact LGA-4 package measuring 1.45mm on each side. 【Features】 ■ High magnetic sensitivity: 7 gauss (0.7mT) ■ Ultra-low power consumption: average current consumption 20nA ■ Operating voltage: 1V to 3.6V ■ Low Rds(on) = 5Ω allows for a maximum supply of 20mA ■ Omnipolar ■ Operating frequency: 1.0Hz *For more details, please download the PDF (English version) or feel free to contact us.

The "CSNV500 Series" is a closed-loop current sensor that employs Hall effect technology. Thanks to its closed-loop configuration and optimized magnetic circuit, it can be used in various magnetic environments. Additionally, the CAN output is equipped with fault detection and communication functions, ensuring that the output is not affected by electrical interference, allowing for the diagnosis of sensor failures or power supply voltage range overshoots and out-of-range power supply voltages. 【Features】 ■ Nominal measurement range: ±500A ■ Overall accuracy: ±0.5% reading (@±40A < Ip < 500A, -40℃ to 85℃, ±3Σ) ■ Digital output: CAN bus (supports selectable ID) ■ Internal diagnostic functions *For more details, please download the PDF (English version) or feel free to contact us.

The "HCLA Series" is a miniature compensated low-pressure sensor that performs precise digital signal adjustments and outputs both analog and digital signals simultaneously. It is calibrated and temperature-compensated, and by utilizing unique correction technology, it achieves very high offset stability and zero-point correction. Additionally, it features a compact SMT and SIL housing designed for the use of dry, non-corrosive gases, allowing for space-saving PCB mounting. 【Features】 ■ Pressure Range ・0 to ±2.5 mbar ・0 to ±75 mbar ■ Pressure Type: Gauge Pressure/Differential Pressure ■ Output ・Analog: 0.25 to 4.25 [V] ・Digital: I2C (SPI option available) *For more details, please download the PDF (English version) or feel free to contact us.

We handle a wide range of sensor products tailored to measurement environments and purposes, including temperature, humidity, pressure, acceleration, gas, light, magnetism, and radar. We have a proven track record in the transportation sector, including industrial measuring instruments, medical devices, environmental measurement instruments, IoT devices, AGV/AMR, and drones. With the evolution of sensor application devices, we can propose appropriate sensor solutions that meet various needs. 【Featured Sensor Manufacturers】 ■ Aichi Steel Corporation ■ Coto Technology ■ First Sensor ■ Gas Sensing Solutions (GSS) ■ Honeywell Safety and Productivity Solutions *For more details, please download the PDF or feel free to contact us.

"BondSens" is a very compact platinum resistance thermometer with a size of 0.75×0.75mm, utilizing sensor technology from IST Corporation. It offers excellent cost performance, long-term stability, and compatibility, making it ideal for energy management, industrial equipment, and thermal compensation in medical devices. Additionally, it supports Au wire bonding, allowing for integration into semiconductor devices. 【Features】 ■ Dimensions: 0.75×0.75×0.3mm ■ Nominal resistance: 1,000Ω @0℃ ■ Operating temperature range: -50 to 150℃ ■ Long-term stability: <0.04% @1,000h @130℃ ■ Au wire bonding design *For more details, please download the PDF (English version) or feel free to contact us.

The "MXR2500MW" is a highly reliable thermal acceleration sensor developed by MEMSIC. The measurement method involves an internal heater and temperature sensor, measuring the heat conduction from the heat source caused by acceleration on the X and Y axes using the temperature sensor. It can withstand shocks of up to 50,000g, significantly reducing the failure rate. Despite its compact package and low cost, it is an ideal product for security applications and office equipment. 【Features】 ■ Measurement range: ±2g ■ Measurement bandwidth: 17Hz ■ Sensitivity: 500mV/g @5V ■ Operating temperature range: -40 to 85℃ ■ Analog output *For more details, please download the PDF (English version) or feel free to contact us.

The "HCE Series" is a pressure sensor that performs precise digital signal adjustments and outputs both analog and digital signals. The operating temperature range is from -25°C to 85°C, and models are available that support supply voltages of 3V and 5V. Additionally, it achieves very high accuracy through calibration, temperature compensation, and linearization, and it is compatible with differential pressure, absolute pressure, and gauge pressure. 【Features】 ■ Pressure range: 10mbar to 5bar ■ Pressure type: Gauge pressure / Differential pressure / Absolute pressure ■ Operating temperature range: -25 to 85°C ■ Output ・Digital: SPI bus ・Analog: 0.25 to 4.25V *For more details, please download the PDF (English version) or feel free to contact us.

The "Model 4610" is a cable-integrated MEMS DC accelerometer equipped with a temperature compensation function. It has a wide measurement range from ±2g to ±200g, and the maximum frequency response is compatible with 0 to 2,700Hz. Additionally, it supports a wide operating temperature range from -55℃ to 125℃ and is specialized for uniaxial detection. 【Features】 ■ Measurement range: ±2 to ±200g ■ Shock protection: 6,000g ■ Accuracy: <2.0% (Total Error Band) ■ Sensitivity: 10 to 1,000mV/m (±5%) ■ Operating temperature range: -55 to 125℃ *For more details, please download the PDF or feel free to contact us.

The "V-LD3" is a sensor module based on Texas Instruments' innovative low-power IWRL6432 chipset. It is suitable for human detection and multiple object tracking applications up to 20m, and is fully compatible with TI's advanced low-power SDK. Additionally, it features an optimized onboard antenna and is calibrated and tested for easy use. 【Features】 ■ Built-in onboard antenna with a field of view of 110° x 50° ■ Generation of detailed 3D point cloud data for stationary and moving targets accessible via UART interface ■ Compact size: 20mm x 25mm ■ Can be connected via SMT soldering or 10-pin FFC ■ Operates on a single 1.8V power supply ■ Communication interfaces: UART/I2C/SPI/CAN-FD *For more details, please download the PDF or feel free to contact us.

The ME504 is a piezoresistive pressure sensor made of ceramic with a diameter of 18mm. It is composed of Al2O3 (alumina) ceramic, offering excellent chemical resistance, robustness, and biocompatibility. It is capable of measuring the flow of various solutions, alkaline liquids, and corrosive gases in semiconductor manufacturing equipment and food production equipment. 【Features】 ■ Excellent durability, corrosion resistance, and wear resistance ■ Pressure range ・0.5 to 800 [bar] ・7 to 11,600 [psi] ・0.05 to 80 [MPa] *For more details, please download the PDF or feel free to contact us.

The "HDO Series" is a pressure sensor that is compact yet equipped with temperature compensation features. It is highly suitable for applications such as medical devices and air conditioning systems, offering three types of pressure measurement: gauge pressure, differential pressure, and absolute pressure, within a low pressure range of 10 mbar to 5 bar. There are high-precision and standard versions available, allowing you to choose products suitable for your operating environment based on specifications such as offset and hysteresis from the data sheet. 【Features】 ■ Pressure range: 10 mbar to 5 bar (1 kPa to 500 kPa) ■ Output: mV output ■ High-precision pressure sensor ■ Temperature compensated ■ Suitable measurement media: non-corrosive, non-ionic working fluids ■ Compact SMD package (11.9 mm × 15.0 mm) ■ RoHS and REACH compliant *For more details, please download the PDF or feel free to contact us.

We would like to introduce our "ESCC Certified Hi-Rel (with extended wire) Platinum Temperature Sensor." The Hi-Rel Pt temperature sensor is available with resistance values from 100Ω to 2000Ω and a temperature range from -200°C to +200°C. Both Flight Model (FM) and Engineering Model (EM) are available, making it suitable for high-reliability applications in the aerospace and automotive industries. 【Features】 ■ Strong thermal cycle resistance ■ Strong vibration resistance ■ Compact dimensions (W×L×H): 2.0×2.2×1.1mm ±0.2mm ■ Lightweight ■ 10mm platinum wire *For more details, please download the PDF or feel free to contact us.

The "IPM Series" is a radar-based automatic intelligent self-calibration particle matter sensor that detects and measures particle concentration using light scattering methods to monitor air quality. It is compatible with particle diameters of PM1.0, PM2.5, PM4.0, and PM10, and can measure particles ranging from 0.3μm to 10μm. Additionally, the concentration measurement range is extensive, from 0 to 1,000μg/m3. This sensor is suitable not only for indoor and outdoor air quality monitoring applications but also for integration into devices such as air purifiers. 【Features】 ■ Compatible with PM1.0, PM2.5, PM4.0, PM10 ■ Wide concentration range of 0μg/m3 to 1,000μg/m3 ■ Supports digital (I2C and UART) and analog (PWM) outputs ■ Fast response time for real-time environmental measurements ■ Robust metal design allows for use in harsh environments *For more details, please download the PDF (English version) or feel free to contact us.

The "BES Series" employs unique gas detection technology aimed at the early detection of venting and thermal runaway in lithium-ion battery packs and modules. It detects the electrolyte vapor that typically occurs during initial venting, as well as hydrogen and carbon monoxide gases released during thermal runaway. This allows for the early identification of thermal runaway in lithium-ion battery packs, significantly reducing risks by implementing appropriate mitigation measures. Furthermore, by responding to multiple gases, the reliability of detection is improved, and the occurrence of false negatives is reduced. Therefore, it is a suitable sensor for installation in large energy storage systems as the adoption of renewable energy expands. 【Features】 ■ Sensing Targets - Battery electrolyte, Hydrogen (H2), Carbon monoxide (CO), Temperature, Humidity/Pressure ■ No need for threshold testing or verification of target gases due to the change rate algorithm ■ Automotive grade: Compliant with international safety regulations such as UN GTR 20, China's GB38031, and the US NHTSA FMVSS 305A *For more details, please download the PDF (English version) or feel free to contact us.

The "MHA100KN" is an innovative omnipolar sensor chip developed by MEMSIC. It allows for the free selection of either N-pole output or S-pole output and can also be used as a smart meter or cover detection switch. Additionally, it features ultra-low power consumption, supports a wide range of input voltages, and its compact design makes it suitable for small consumer devices such as wireless earphones, speakers, and laptops. It has a built-in sensitivity compensation circuit and excellent temperature compensation capabilities, ensuring high-quality performance and stability even in environments ranging from -45°C to 85°C. 【Features】 ■ CMOS low power consumption ■ Built-in sensitivity compensation circuit ■ Operating voltage: 1.65–5.5V ■ Magnetic switching points: min 27 - typ 37 - max 47 [Gauss] ■ Size: 1.0×1.4×0.37mm *For more details, please download the PDF (English version) or feel free to contact us.

IntraSense is an absolute pressure sensor that can be mounted on an ultra-thin catheter tip of 1 Fr (French) = 330μm. Despite its ultra-compact size of 50µm × 220µm × 75μm, it can accurately measure a wide pressure range of +460 to +1,260 mmHg. Its fully encapsulated structure eliminates the need for additional sealing or gel, maintaining stable output even in 37℃ saline solution. It is connected with a three-core insulated cable, making integration easy. Compliant with AAMI/ANSI standards and designed for single use with biocompatible materials, it ensures safety and reliability in acute medical settings. This sensor is ideal for all medical device developers seeking high precision, compactness, and ease of use. *For more details, please download the PDF (English version) or feel free to contact us.*