グローバル電子 List of Products and Services

The "MX01 Series" is a flexible decorative light that can be freely bent and shaped. It can operate on primary batteries with options for high-speed flashing, low-speed flashing, and constant lighting; on secondary batteries, it allows for low-speed flashing and constant lighting, while on smartphones, only constant lighting is available. With an IP68 rating, it can be washed as is when sewn into clothing, and the available light colors are white, red, blue, green, yellow, rose gold, turquoise (blue-green), and magenta (reddish-purple). 【Features】 ■ Dustproof and waterproof, allowing for washing ■ Illuminates in 360° all directions ■ Good light conductivity, evenly illuminating the entire tube ■ Can be sewn onto fabric *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

The "WEX025664B-CTP" is a 3.12-inch COF structure graphic OLED display with a resolution of 256x64 dots and a capacitive touch panel. The interface supports 6800/8080 8-bit parallel and SPI, with a 3.0V (Typ.) logic power supply voltage and a 4-bit grayscale. The supply voltage for the display is 14.5V, and the duty cycle is 1/64. The touch panel IC supports I2C interface with one detection point. 【Features】 ■ 3.12-inch capacitive graphic OLED ■ Logic power supply voltage is 3.0V, and display voltage is 14.5V ■ Operating temperature -20℃ to 70℃, storage temperature -30℃ to 80℃ ■ Emission colors are white, yellow, cyan, and green *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

The "WF101JTYAHLNN0" is a 10.1-inch IPS TFT LCD module with a resolution of 1024x600 dots in landscape mode. This model is equipped with built-in EK79001HN and EK73215BCGA driver ICs and features an LVDS interface, with a contrast ratio of 800 (Typ.). The brightness is 500 nits (Typ.), and the aspect ratio is 16:9, with a high-brightness type also available. 【Features】 ■ 10.1-inch LCD module in landscape mode ■ The surface is anti-glare, typically black, and supports transmissive LCD ■ Interface is LVDS ■ Viewing angles are 85 degrees left/right/up/down (Typ.) * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

The "WF50F" is a 5-inch landscape-type IPS TFT LCD with a resolution of 800x480. It has a built-in ST7262 driver IC and supports a 24-bit RGB interface. The contrast ratio is 1000 (typical). The "WF50FSWAGDNN0" is a high-brightness type with a brightness of 1000 nits (typical). It can be equipped with both resistive (RTP) and capacitive (PCAP) touch panels. 【Features】 ■ Compatible with resistive and capacitive touch panels ■ Power supply voltage range: 3.0V to 3.6V ■ Wide viewing angles: Left 80 / Right 80 / Up 80 / Down 80 degrees ■ Storage temperature & operating temperature -30℃ to 80℃ * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

The WEG010016J is a 3.84-inch, COB type, 100×16 dot monochrome graphic PM OLED. This module incorporates the WS0010 control IC and supports 6800 (default), 8080, and SPI interfaces. Compared to general monochrome LCDs, OLEDs offer high contrast, with a darker background color, and the display effect is beautiful and clear. 【Features】 ■ High contrast, fast response speed, wide viewing angle ■ Display colors are white, yellow, blue, and green ■ Supply voltage is 5V, with a duty cycle of 1/16 ■ Supports 6800, 8080, and SPI interfaces ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 70℃ * For more details, please refer to the PDF documentation or feel free to contact us. * An English version of the catalog is available for download.

HARVATEK is a specialized manufacturer of LEDs, primarily focusing on SMD LEDs. We can provide affordable, high-quality products produced in Taiwan through automated equipment. We are not only focused on visible light but are particularly concentrating on the rapidly increasing demand for IR LEDs. We also accommodate custom solutions that incorporate multiple chips in one package, including UV and visible light chips for various sensor applications, with a proven track record. 【Features】 ■ Capable of IR + red, RGB + PD, IR + sensor, and 2-in-1 configurations ■ Ultra-high output infrared output in a compact form factor ■ Custom solutions such as red + IR + UV, 3-in-1, etc. ■ A wide range of high-performance light sensors *For more details, please refer to the related link page or feel free to contact us.

Kingbright is an LED manufacturer that specializes in indicator LEDs. With our own factory dedicated to LED packaging, we have gained the loyalty of customers worldwide due to our stable production and quality. We offer a diverse lineup that meets varying needs, including mold types as small as 0.6×0.3mm and side-emitting types of 3×1mm, which are among the smallest in the industry. We have a wide range of standard and basic LED components available for adoption as standard parts. 【Features】 - User-friendly and versatile product specifications - Diverse lineup - Stable quality and delivery times - Extensive market experience *For more details, please refer to the related link page or feel free to contact us.

The "B36J3 series" enables the development of ultra-high-resolution displays that leverage the advantages of ultra-compact sizes, maximizing the potential for expression. It is a product in which the RGB interface has been pre-selected to appear white, making it suitable for LED displays and LED theater screens. Additionally, it is also suitable for the miniaturization and thinness of future electronic and electrical devices. 【Features】 ■ Ultra-compact RGB LED in the world's smallest class ■ Red, green, and blue operating currents pre-selected to appear white ■ Low operating current for low power consumption ■ Available in both common anode and cathode configurations * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WF52ATLASDNN0" is a 5.2-inch bar-type TFT color LCD. The "WF52A" is a new size and resolution product with an effective display area of 133.4x39.4mm and an active area of 127.152x33.9072mm. This product has a built-in ST7252 or equivalent driver IC and supports an RGB 24-bit parallel interface in SYNC mode. If a PCB with screw holes is required, you can choose the WF52ATLBSDBN0. The related videos below showcase various images and color reproduction. Please take a look. 【Features】 ■ 5.2-inch bar type ■ Built-in ST7252 driver IC ■ Supports 24-bit RGB interface ■ Resolution: 480×128 pixels ■ Normally white, transmissive LCD with an anti-glare surface * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEO009632B-ZIF" is a 0.68-inch, 96x32 dot, mini OLED display. It has a built-in SSD1305 driver IC and supports 6800/8080 8-bit parallel, I2C, and 4-wire SPI interfaces, with a supply voltage of 3V and a duty cycle of 1/32. With 50% of the display area used, the current consumption is 3.6mA @ 12Vcc (typical). It is a COG PMOLED module, and due to the lack of a backlight, it is extremely thin at 1.21mm. 【Features】 ■ High contrast, fast response speed, compact, lightweight ■ Display colors are white and yellow (2 colors) ■ Supply voltage is 3V, and the duty cycle is 1/32 ■ Compatible with 6800, 8080, SPI, and I2C interfaces ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The WEO004864A is a small PM OLED with a resolution of 48x64 dots. The product size is only 13.90×22.0mm. The power supply voltage is 3V, and its self-emitting COG structure allows for a thin, lightweight design and low power consumption. Furthermore, it was awarded the 2021 Taiwan Excellence Award. This award is given to products that possess "innovative value" based on four evaluation criteria: research and development, design, quality, and marketing. 【Features】 ■ High contrast, fast response speed, small and lightweight ■ Display colors are white, yellow, and sky blue ■ Supply voltage is 3V with a duty cycle of 1/64 ■ Supports I2C interface ■ Storage temperature -40℃ to 85℃, operating temperature -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEA128128A" features a mounted circuit board with a diagonal size of 1.5 inches and a resolution of 128x128. It has mounting holes for easy installation into your equipment. This OLED display incorporates the "SSD1327," supports 16 (4-bit) grayscale inversion, and has a drive duty of 1/128. With a display area usage of 50%, it consumes 160mA at 3.3VDD (Typ.). 【Features】 ■ High contrast, fast response speed, low power consumption ■ Display colors: white, yellow, light blue ■ Logic power supply voltage: 3.3 to 5V ■ Supports SPI interface, I2C is also available ■ Storage temperature: -40 to 85℃ ■ Operating temperature: -40 to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

HARVATEK is a specialized manufacturer of LEDs, primarily focusing on SMD LEDs. Thanks to automated equipment, we can offer affordable and high-quality products produced in Taiwan. We are particularly focusing on "UV LEDs," which are currently in high demand, in addition to visible light. Among them, "UVC" is effective in sterilizing many spores and has been confirmed to inactivate certain viruses. 【Features】 ■ Output: Ranges from 4.5mW to 200mW ■ Effective against various bacteria ■ In addition to standalone LEDs, we can also accommodate custom development as a device *For more details, please refer to the related link page or feel free to contact us.

Global Electronics proposes HMI and display device solutions required in the new normal era. We handle products from Neonode and Microchip Technology, which deal with optical non-contact touch products and electric field sensing gesture control products, as well as products from Winstar Display and Wayton Technology, which offer OLED display modules and LCD modules.

The WEA025664A features a mounted circuit board with a diagonal size of 2.08 inches and a resolution of 256×64 organic EL display. The circuit board size is 70×22mm (with 7×1 metal pins). This organic EL display incorporates an SSD1362, supports 4-bit grayscale images, and has a driving duty of 1/64. 【Features】 ■ Display colors: white and yellow (2 colors) ■ Logic power supply voltage: 3V or 5V ■ Storage temperature: -40℃ to 85℃ ■ Operating temperature: -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "WEN025664B-CTP" features a mounted circuit board with a diagonal dimension of 3.12 inches and a resolution of 256×64 organic EL display. It incorporates the "SSD1322 COF IC" and supports 4-bit grayscale images, with a driving duty of 1/64. The circuit board includes a VCC circuit. 【Features】 ■ Module size: 89.2×44.0×7.98mm ■ Display colors: white, yellow, light blue, green (4 colors) ■ Logic power supply voltage: 3V ■ Interface: compatible with 6800, 8080, SPI ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "HCD89396" is a 0.52-inch (13.2mm) tall, single-digit 7-segment display. By using RGB LEDs for each segment, it is possible to emit seven colors by utilizing intermediate colors in addition to red, green, and blue. This product uses RGB SMD LEDs and features white segments on a black face. 【Features】 ■ Low power consumption, high reliability ■ High brightness, high contrast ■ Wide viewing angle, RoHS compliant ■ Selected luminous intensity ranks for each color * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

For applications that require protection for displays, we can equip them with hard cover lenses to protect against physical damage. Winstar offers three options for cover lenses for 7-inch TFT-LCD modules: 0.7mm, 1.8mm, and 3.0mm. The higher the IK code, the greater the impact protection. The IK code is an international classification grade code regarding external impact protection for electronic device enclosures. Custom cover lenses are also available. 【Product Lineup】 ■XX06: Thickness 0.7mm ■XX07: Thickness 1.8mm ■XX08: Thickness 3mm *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the "LCD Backlight Module" that we handle. To allow customers to compare and confirm the effects of the backlight, we provide samples of glass and backlight combinations. We offer TN type, STN type, and FSTN type. If you have any specific requests regarding combinations, please feel free to contact us, and we will consider the feasibility of accommodating your needs. 【Features】 ■TN Type - TN Positive Green - TN Negative Black ■STN Type - STN Positive Gray - STN Positive Yellow-Green - STN Negative Blue *For more details, please refer to the related links or feel free to contact us.

The "WF32DSLAJDNN0" is a high-brightness type TFT that incorporates the ILI9341 driver IC. The contrast ratio is 500:1 (Typ.), and the viewing angle is at the 6 o'clock direction (grayscale inversion at the 12 o'clock direction), with an anti-glare treatment applied to the panel surface. It can be utilized in smart home applications, as well as in medical devices, security equipment, and measurement instruments. 【Features】 ■ Module size: 50.04×77.6×2.55mm ■ LCD type: TFT, normally white, transmissive ■ Backlight: LED, normally white ■ Resolution: 240×RGB×320 pixels ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WF70A9SWAGDNT0" is a TFT LCD equipped with an IPS panel that has a wide viewing angle. It can operate in a temperature range of -30°C to 80°C. The viewing angles are left: 80/right: 80/up: 80/down: 80 degrees (Typ.), and the contrast ratio is 1000:1 (Typ.). The surface of the panel is treated with an anti-glare finish, and the screen aspect ratio is 15:9. 【Features】 ■ Module size: 165.8×106.61×8.0mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Power supply voltage (VCC): 2.7V to 3.6V, with Typ. at 3.3V ■ Storage temperature: -30°C to 80°C ■ Operating temperature: -30°C to 80°C *You can download the English version of the catalog. *For more details, please refer to the PDF document or feel free to contact us.

The WEO012864Z is a 0.96-inch COG type OLED display equipped with a control knob. It supports 4-wire SPI and I2C interfaces. The resolution is 128x64 dots, and it has an integrated SSD1306IC. The supply voltage (VCI) ranges from a minimum of 1.65V to a maximum of 3.3V, with a 1/64 duty cycle. 【Features】 ■ Built-in encoder allows operation beyond touch panel ■ Display colors: three colors - white, yellow, and blue ■ Supply voltage: 1.65 to 3.3V, duty cycle is 1/64 ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEO012864Z series" is a 0.96-inch COG type OLED display equipped with a control knob. The resolution is 128x64 dots. It has a built-in SSD1306 IC, and the interface supports 4-wire SPI and I2C. The supply voltage ranges from a minimum of 1.65V to a maximum of 3.3V, with a 1/64 duty cycle. 【Features】 ■ Built-in encoder allows operation beyond touch panel ■ Display colors: three colors - white, yellow, and blue ■ Supply voltage: 1.65 to 3.3V, duty cycle is 1/64 ■ Supports 4-wire SPI and I2C interfaces ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "WF24MTLAJDNT0" is a 2.4-inch SPI TFT-LCD module with a portrait mode, equipped with a resistive touch screen (RTP). The resolution is 240x320 pixels. The surface treatment of the panel is anti-glare, with a viewing angle of 6 o'clock and grayscale inversion at 12 o'clock. Additionally, the contrast ratio is 500:1, and the brightness is 350 nits (Typ.), with a version available without a touch panel. 【Features】 ■ Module size: 42.72×60.26×3.43mm ■ LCD type: TFT, normally white, transmissive ■ Backlight: LED, normally white ■ Resolution: 240×RGB×320 pixels ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WF28KTLAJDNT0" is a 2.8-inch SPI TFT-LCD module with a resistive touch screen (RTP) in portrait mode. The resolution is 240×320 pixels. The panel surface treatment is glossy, with a viewing angle of 6 o'clock and grayscale inversion direction at 12 o'clock. Additionally, it has a contrast ratio of 500:1 and a brightness of 350 nits (Typ.), and a version without a touch panel is also available. 【Features】 ■ Module size: 50.0×69.2×3.48mm ■ LCD type: TFT, normally white, transmissive ■ Backlight: LED, normally white ■ Resolution: 240×RGB×320 pixels ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "MFR070KC-IX" is a horizontal TFT LCD module with a 7.0-inch capacitive touch panel. It features a wide viewing angle of 85 degrees left/right/up/down (Typ.), high brightness of 750 cd/m² (Typ.), and a backlight lifespan of 20,000 hours (Min.). It can be utilized in measuring instruments, remote control panels, printers, and more. 【Features】 ■ Viewing Angle: 85/85/85/85 IPS ■ LCD Type: Normally Black, Transmissive ■ Backlight Type: LED, Normally Black ■ Resolution: 1024×RGB×600 ■ Storage Temperature: -30℃ to 80℃ ■ Operating Temperature: -20℃ to 70℃ * An English version of the catalog is available for download. * For more details, please refer to the PDF document or feel free to contact us.

The "WF50FSYFGDHGV" is a TFT display that comes with a control board supporting the HDMI signal interface (DVI only) for the Raspberry Pi system. The board features a 40-pin GPIO connector, designed for easy use with the Raspberry Pi. The control board has four mounting holes, allowing for easy implementation into your equipment and products. 【Features】 ■ Module size: 120.7×75.8×23.2mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Panel surface treatment: Glossy ■ Contrast ratio: 1000:1 * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "WEO009616B" is a COG small OLED display designed for consumer products. It has a diagonal size of 0.69 inches and a resolution of 96x16 pixels, with an integrated SSD1306 IC. At 50% display area usage, it consumes 5mA at 7.5V VCC (Typ.), and the drive duty is 1/16. It can be used in smart home applications, smart controls, and medical devices. 【Features】 ■ Module size: 26.3×8.0×1.26mm ■ Display color: White ■ Logic power supply voltage: 3.0V ■ Ultra-thin, lightweight, low power consumption ■ Storage temperature: -30℃ to 70℃ ■ Operating temperature: -30℃ to 70℃ * An English version of the catalog is available for download. * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the product we handle, "WEO012832M-CTP." The "SSD7317" integrated into this product is a Touch and Display Driver Integration IC (TDDI), designed for applications such as wearable devices, and is used with PM OLED panels in a single chip integration. It adopts in-cell touch panel technology, equipped with four touch keys (areas) and one directional slide, and supports SPI and I2C interfaces. 【Features】 ■ Module size: 30.0×11.5×1.41mm ■ Display color: White ■ CTP IC FT6336U, I2C interface ■ 128×32 pixels, in-cell capacitive touch panel ■ Storage temperature: -40℃ to 85℃ ■ Operating temperature: -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the 'WF101KTYAPLNN0' equipped with a wide viewing angle IPS panel that we handle. The viewing angle is 80 degrees (Typ.) in all directions: left, right, up, and down, with a contrast ratio of 1000:1 (Typ.) and a brightness of 350 nits (Typ.). The panel surface is treated with anti-glare, and the screen aspect ratio is 16:10. You can choose between a non-touch panel, a projected capacitive touch panel, or a resistive touch panel, and a high-brightness type is also available. 【Features】 ■ Module size: 229.34×148.98×2.85mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Power supply voltage (VCC): 3.0V to 3.5V, Typ. is 3.3V ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The 『WEO012864A-CTP』 is a COG graphic organic EL with a 1.54-inch touch panel. The resolution is 128×64 pixels. There are two CTP options available: one CTP touch panel uses an air bonding process, while the other uses an optical bonding (OCA) process. Both of these two CTP touch panel options incorporate the FT6336U IC and support the I2C interface at a single detection point. 【Features】 ■ Module size: 43.04×28.22×3.01mm ■ Display colors: white/yellow/green ■ CTP IC is FT6336U with I2C interface ■ 128×64 pixels, capacitive touch panel ■ Storage temperature: -20℃ to 70℃ ■ Operating temperature: -10℃ to 60℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 4.3-inch LCD with IPS TFT PCAP, model 'WF43XTWAGDNG0', that we handle. It features an IPS panel with a wide viewing angle of 80 degrees (Typ.) in all directions—left, right, up, and down. The contrast ratio is 800:1 (Typ.) and the brightness is 500 nits (Typ.). The surface of the panel is treated with a glare finish, and the screen aspect ratio is 16:9. The projected capacitive touch panel incorporates the ILI2130 IC and supports I2C interface and multi-touch functionality. A version without a touch panel is also available. 【Features】 ■ Module size: 105.5 × 67.2 × 5.44 mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Power supply voltage (VCC) is 3.0V to 3.6V, with a typical value of 3.3V ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -30℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "MF035A-BQ" is a 3.5-inch horizontal TFT LCD module with a resolution of 320×240. It features a high brightness of 250cd/m² (Typ.) and a backlight lifespan of 20,000 hours (Min.). The viewing angle is at the 12 o'clock position (grayscale inversion at the 6 o'clock position), and it is compatible with a touch panel. We offer semi-custom options at low cost to meet customer needs. 【Features】 ■ Module size: 76.9×63.9×3.2mm ■ LCD type: Normally white, transmissive ■ Backlight: LED, normally white ■ Resolution: 320×RGB×240 ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

The "MFC024HT-BQ" is a 2.4-inch vertical TN TFT LCD module with a resolution of 240×320 and a resistive touch panel (RTP). It can be semi-customized according to your needs. The viewing angle is at the 6 o'clock direction (grayscale inversion at the 12 o'clock direction). Additionally, the brightness is 200 cd/m² (Typ.), and it features an 8080 MCU interface with 8-bit/16-bit (4-wire). 【Features】 ■ Module size: 42.72×60.26×4.4mm ■ LCD type: Normally white, transmissive ■ Backlight: LED, normally white ■ Resolution: 240×RGB×320 ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'WF101LSYAPLNN0' that we handle. It is equipped with a wide viewing angle IPS panel, with viewing angles of 80 degrees (Typ.) to the left, right, up, and down. The contrast ratio is 1000:1 (Typ.), the brightness is 1100 nits (Typ.), and the panel surface has an anti-glare treatment with a screen aspect ratio of 16:10. Additionally, you can choose between a non-touch panel, a projected capacitive touch panel, or a resistive touch panel. 【Features】 ■ Module size: 230.56×155.01×6.4mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Power supply voltage (VCC): 3.0V to 3.5V, with Typ. at 3.3V ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

We would like to introduce the "Organic EL Display" from WINSTAR Display, which we handle. Due to its structure of forming a thin film of organic material on a thin glass, the display can be formed close to the edge of the glass, eliminating the need for a backlight. Additionally, it can operate in harsh environments with a wide temperature range of -40℃ to +80℃. 【Features】 ■ Wide viewing angle, high contrast ■ High resolution ■ Fast response speed ■ Wide temperature range, long lifespan ■ Thin and lightweight ■ No backlight required ■ Low voltage, low power consumption *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'WF40ETWAA6DNN0' that we handle. It features a resolution of 480×480 and is equipped with an IPS panel that has a wide viewing angle. The contrast ratio is 800:1 (Typ.) and the brightness is 500 nits (Typ.), with a glare-treated surface on the panel, and the screen aspect ratio is 1:1. Additionally, we offer an optional projected capacitive touch panel and a resistive touch panel. 【Features】 ■ Module size: 78.8×82.95×4.77mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Resolution: 480×3RGB×480 pixels ■ Storage temperature: -30℃ to 85℃ ■ Operating temperature: -30℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'WF70A8TYAHMNN0' that we handle. The brightness is 600 nits (Typ.), but if a high-brightness type is not necessary, we also offer a product with 1100 nits. Additionally, we provide optional capacitive and resistive touch panels. 【Features】 ■ Module size: 169.9×103.4×5.6mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Resolution: 1024×RGB×600 (TFT) pixels ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the 'WF101JTYAHMNB0' that we handle. It is equipped with a capacitive touch panel, with a brightness of 400 nits (Typ.), and a high-brightness type is also available. There is an option for a resistive touch panel as well. Additionally, it incorporates EK79007AD3 and EK73217BCGA driver ICs and supports a 4-lane MIPI DSI interface. 【Features】 ■ Module size: 235×143×8.78mm ■ LCD type: TFT, normally black, transmissive ■ Backlight: LED, normally white ■ Built-in ILI2511 supporting USB and I2C interfaces ■ Storage temperature: -30℃ to 80℃ ■ Operating temperature: -20℃ to 70℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The WEO012864AJ is a 2.42-inch COG structure graphic organic EL display. It incorporates CH1116 and supports I2C, 4-wire SPI, and 6800/8080 parallel interfaces. The power supply voltage (Typ.) is 3V for logic and 13V for the display, with a driving duty of 1/64. Options for PCB substrate, ZIF FPC, and hot bar FPC versions are also available. 【Features】 ■ Module size: 60.5×37.0×2.11mm ■ Display colors: White/Yellow ■ Interfaces: Supports I2C, SPI, 6800, and 8080 ■ Resolution: 128×64 pixels ■ Storage temperature: -40℃ to 85℃ ■ Operating temperature: -40℃ to 80℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The WEO012864AE is a 1.54-inch COG structure graphic organic EL display. It incorporates the CH1116 and supports I2C, 4-wire SPI, and 6800/8080 parallel interfaces. The power supply voltage (Typ.) is 3V for logic and 12.5V for the display, with a drive duty of 1/64. There are different ZIF FPC options available, providing 24-pin and 30-pin options. 【Features】 ■ Module size: 42.04×27.22×1.41mm ■ Display colors: White/Yellow ■ Interfaces: Supports I2C, SPI, 6800, 8080 ■ Resolution: 128×64 pixels ■ Operating temperature: -40℃ to 80℃ ■ Storage temperature: -40℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

"WEO012864AK" is a 2.7-inch COG structure graphic organic EL display. It incorporates CH1116 and supports I2C, 4-wire SPI, and 6800/8080 parallel interfaces. The power supply voltage (Typ.) is 3V for logic and 13V for the display, with a driving duty of 1/64. There are different ZIF FPC options available with 22, 24, 30, and 31 pins. 【Features】 ■ Module size: 73.0×41.86×2.01mm ■ Display colors: White/Yellow ■ Interfaces: Supports I2C, SPI, 6800, 8080 ■ Resolution: 128×64 pixels ■ Operating temperature: -40℃ to 80℃ ■ Storage temperature: -40℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEA064128A" features a consumer-grade COG structure and an organic EL display with a diagonal size of 0.96 inches. This product is equipped with a substrate that has four mounting holes and metal pins, making it easy to implement into your equipment and products. Additionally, the substrate includes a boost circuit, allowing customers to use it by providing a single set of VDD voltage. 【Features】 ■ Module size: 34.0×18.0×1.41mm ■ Display mode: Passive matrix, display color is white ■ Interface: Supports I2C ■ Resolution: 64×128 pixels ■ Operating temperature: -30℃ to 70℃ ■ Storage temperature: -30℃ to 70℃ * An English version of the catalog is available for download. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEO128128G" is a graphic organic EL display with a COG structure and a 1.12-inch hot bar FPC, featuring a resolution of 128×128. The logic power supply voltage is 3V (Typ.), the display operates at 12V, with a current consumption of 15mA@VCC12V (emitting color is white) when using 50% of the display area, and the driving duty is 1/128. This product offers the advantages of being ultra-thin, lightweight, and low power consumption. Please feel free to consult us when you need assistance. 【Features】 ■ Module size is 25.9×30.1×1.26mm ■ Display mode is passive matrix, and the display color is white ■ Supports interfaces 6800/8080, SPI, and I2C ■ Resolution is 128×128 pixels ■ Operating temperature -40℃ to 80℃, storage temperature -40℃ to 85℃ * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

The "WEO001602H" is an organic EL display that incorporates the WS0012 IC and supports 6800/8080 8-bit parallel, I2C, and 4-wire SPI interfaces. The power supply voltage is 3.3V (VDD) for logic and 8.5V (VCC) for the display, with a current consumption of 2mA at VCC 8.5V when using 50% of the display area. The drive duty is 1/16. The operating temperature ranges from -40°C to +80°C, and the storage temperature ranges from -40°C to +85°C. 【Features】 ■ Module size: 39.1×15.8×2.01mm ■ Display mode: Passive matrix, display colors are white and yellow ■ Interfaces: Supports 6800/8080, SPI, and I2C ■ Ultra-thin, high brightness, low power consumption, fast response, wide viewing angle ■ Operating temperature: -40°C to 80°C, storage temperature: -40°C to 85°C * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.