グローバル電子 List of Products and Services

The LAN9253 is a 3-port EtherCAT device controller (ESC). It has a built-in dual Ethernet PHY, each equipped with a full-duplex 100BASE-TX transceiver, supporting 100Mbps (100BASE-TX) operation. Additionally, it supports HP Auto-MDIX, allowing the use of either direct connection or crossover LAN cables. 【Features】 ■ 2/3-port EtherCAT slave controller with 8 fieldbus memory management units (FMMUs) and 8 SyncManagers ■ Dual integrated Ethernet PHY with HP Auto-MDIX ■ Wake on LAN (WoL) support ■ Optimization of EtherCAT cycle time ■ 3.3V single power supply (1.2V LDO built-in) ■ Package: 64-pin QFN (9×9mm) *For more details, please download the PDF (English version) or feel free to contact us.

The "HCE Series" is a pressure sensor that performs precise digital signal adjustments and outputs both analog and digital signals. The operating temperature range is from -25°C to 85°C, and models are available that support supply voltages of 3V and 5V. Additionally, it achieves very high accuracy through calibration, temperature compensation, and linearization, and it is compatible with differential pressure, absolute pressure, and gauge pressure. 【Features】 ■ Pressure range: 10mbar to 5bar ■ Pressure type: Gauge pressure / Differential pressure / Absolute pressure ■ Operating temperature range: -25 to 85°C ■ Output ・Digital: SPI bus ・Analog: 0.25 to 4.25V *For more details, please download the PDF (English version) or feel free to contact us.

The "dsPIC33A Family" is a product designed for high-performance, real-time, high-precision control applications. It features built-in analog peripheral modules such as a 12-bit ADC with a conversion rate of up to 40Msps, high-speed comparators, and operational amplifiers. By combining these analog peripheral modules with the CIP, advanced sensing and high-performance control become possible. 【Features】 ■ High-performance 32-bit CPU, operating at 200MHz ■ Power supply voltage range: 3.0V to 3.6V ■ Up to 128KB of Flash and 16KB of SRAM ■ High-speed 40MSPS 12-bit ADC *For more details, please download the PDF (English version) or feel free to contact us.

The "HYT271" is a high-speed response temperature and humidity sensor module with dimensions of just 10.2mm × 5.1mm × 1.8mm. It offers a wide range of applications and an excellent price-performance ratio, making it a suitable solution for fast measurements and complex mass applications. Additionally, with SIL contacts, it can be integrated into various assemblies, providing accurately calibrated and temperature-compensated parameters for relative humidity and temperature. 【Features】 ■ Fast response time (humidity under 4 seconds, temperature under 5 seconds) ■ Excellent temperature and humidity measurement accuracy ■ Low hysteresis ■ Low drift ■ Fully calibrated and temperature-compensated sensor *For more details, please download the PDF (English version) or feel free to contact us.

The "BZ/BA/BM/BE/6AS series" is a series of limit switches characterized by robust design and high reliability. It has obtained global certifications such as UL, CSA, UKCA, and ENEC, and complies with the U.S. Department of Defense switch standard MIL-PRF-8805. Additionally, the standard operating temperature ranges from -55°C to 85°C, with a maximum capacity of 25A. This series accommodates a variety of shapes and electrical characteristics. 【Features】 ■ Global certifications (UL, CSA, CE, UKCA, ENEC) ■ MIL-PRF-8805 standard ■ Circuit configurations: SPDT, SPNC, SPNO ■ Rated currents: 15A, 20A, 22A, 25A ■ Operating force: 1.0oz to 28oz (28.34g to 793.78g) ■ Operating temperature: -55°C to 85°C *For more details, please download the PDF or feel free to contact us.

The "WFN0276A2T0YADNN000" is a 2.76-inch round IPS TFT LCD display module. It offers a resolution of 480×480 pixels, and the surface is treated with an anti-glare finish to reduce reflections and improve visibility under various lighting conditions. Additionally, it features a 3W SPI + RGB 18-bit interface and is equipped with the ST7701 driver IC, ensuring smooth integration and reliable display performance. 【Features】 ■ Wide viewing angle ■ Low power consumption for long operation ■ Input voltage range: 2.7V to 3.3V (TYP: 3V) ■ Smooth screen transitions *For more details, please download the PDF (English version) or feel free to contact us.

The "dsPIC33CH" is a product that incorporates two dsPIC DSC cores on a single chip. It is optimized for safety-critical applications that require functional safety compliance and security. It is suitable for general-purpose high-end embedded applications that require high-performance digital power, motor control, advanced sensing and control, and sophisticated algorithms. 【Features】 ■ Equipped with two cores: a master core and a slave core ■ High-speed 12-bit ADC for high-precision analog data processing ■ Built-in operational amplifiers and DAC ■ Rich communication interfaces such as CAN-FD, UART, SPI, and I2C ■ PWM with a resolution of up to 250ps *For more details, please download the PDF or feel free to contact us.

The "TCO SE Series" is a temperature fuse that uses bimetal. With a size of 4.7×2.8×1.23(H)mm, which is among the smallest in the industry, the trip temperature settings are 72℃, 77℃, 82℃, and 85℃ (all with a tolerance of ±5℃). Additionally, it complies with the RoHS directive and achieves higher humidity resistance than typical protection devices by adopting a bimetal mechanism with the highest level of corrosion resistance. 【Features】 ■ 48V/5A (compliant with USB PD 240W standard, supports up to 54V) ■ Rapid response to protect against overheating and overcurrent ■ Instantly cuts off abnormal overcurrent ■ Corrosion resistance ■ RoHS compliant, halogen-free *For more details, please download the PDF or feel free to contact us.

The "MCU PIC16F13145 Family" meets the demands for on-chip digital logic with its new Configurable Logic Block (CLB) module. This eliminates the need for external logic chips. The CLB contains 32 basic logic elements, each of which can be used as AND/OR/NAND/NOR gates, buffers/inverting buffers, etc. Please feel free to contact us if you have any inquiries. 【Features】 ■ Operating voltage range: 1.8V to 5.5V ■ CLB contains 32 basic logic elements ■ Equipped with a 10-bit ADC (up to 300ksps) and an 8-bit DAC ■ Two high-speed comparators with a response time of 50ns ■ High-precision internal oscillator with ±2% accuracy (up to 32MHz) *For more details, please download the PDF or feel free to contact us.

We would like to introduce the 1.54-inch OLED display with PCB that we handle, the 'WEA016080 series'. It offers a resolution of 160×80, and the integrated PCB simplifies your PCB development process. It also includes mounting holes for easy installation, providing a reliable solution for various applications. 【Features】 ■ High resolution: 160×80 pixels for clear visual display ■ Excellent contrast: Vivid images with a ratio of 10,000:1 ■ Low power consumption: Low power usage at a 3V operating voltage ■ COG structure: Supports built-in driver IC and 4-wire SPI ■ Wide temperature range: Operating temperature range from -40℃ to +80℃ *For more details, please download the PDF or feel free to contact us.

【Product Overview】 This module allows you to incorporate PoE circuitry into your product by mounting it on a host board. Even without expertise in PoE design, you can develop PoE-enabled products by adopting this module. We also provide design support from the circuit design stage, so please feel free to contact us. 【Benefits of PoE】 When supplying power in locations without outlets, if a LAN cable can be run, power can be supplied using PoE technology. It is utilized in outdoor surveillance cameras and IoT devices within large factories. 【Features】 ■ Significantly reduces the number of components through the module ■ Simplifies peripheral circuits ■ Contributes to product miniaturization due to its ultra-compact size ■ Available for purchase from a single unit ■ Excellent design support available

The Coilcraft P32xx series toroidal common mode chokes are ideal noise filters for power circuit design, such as switching power supplies and AC line filters. With a toroidal core structure and single-layer winding design, they effectively suppress high-frequency noise in the 100-300 kHz range. They powerfully eliminate common mode noise and power supply noise generated on power lines. The lineup includes the "High L series" with high inductance design and the "Standard series" with low DCR and high current capability, allowing you to choose the optimal model for your application. Additionally, with a high-reliability design certified by UL (Class B 130°C) and compliant with RoHS/REACH, they can be safely used in various fields such as industrial equipment power supplies, communication devices, home appliances, and PoE devices. Despite their small size, they demonstrate excellent EMI countermeasure performance and enhance the design flexibility of filter circuits, enabling robust circuit design against noise.