サンハヤト List of Products and Services

Solder sucker integrated with a heater and suction tube.

• Other cutting tools

A surface mount component installation kit that can be easily implemented without special tools, whether for QFP ICs or chip resistors.

• Other work tools

A surface mount component removal kit that allows for easy removal of surface mount parts with just one soldering iron you have on hand.

• Other work tools

Eraser with a timer that can process 40 items simultaneously.

• Data Erasing

Compact and lightweight eraser capable of processing 20 items simultaneously.

• Data Erasing

Extraction jig for KEL SOC01-044 socket (compliant with JEITA standard EDR-7320, 1.27mm pitch 600mil SOP44 pin)

• Other work tools

RoHS-compliant PLCC extraction tool

• Other work tools

Introducing "Pin Aligned," ideal for correcting pin width when inserting ICs into substrates, etc.

• Other work tools

By adopting the lever system, a pull-out tool that allows for easy extraction of ICs with a high number of pins while seated.

• Other work tools

Pulling tool ideal for extracting DIP type ICs.

• Other work tools

A computer is an emulator that connects easily via USB, supports bus power, and does not require an external power source, allowing it to be used in various work locations.

• Other embedded systems (software and hardware)

For developing positive photosensitive substrates...

• Thermometer

This is an introduction to the silicone for heat dissipation that is handled by Sanhayato Corporation.

• others

This is an introduction to heat-resistant silicone handled by Sanhayato Corporation.

• others

This is an introduction to the heat dissipation silicone handled by Sanhayato Corporation.

• others

Heat-resistant contact grease "Contact Grease"

• Lubricants

Contact revival agent formulated with special additives based on 100% synthetic α-olefin.

• others

Chemically stable, synthetic oil-based rust preventive lubricant for electrical contacts.

• others

Non-wet, non-sticky dry-type antistatic agent

• others
• Anti-static products

OA equipment and office anti-static agent

• Chemicals
• Other anti-static devices

A detergent for grease stains that cleans stubborn oil dirt thoroughly.

• Cleaning agents

This is a non-silicone type grease for slide contacts based on chemically stable synthetic oil. It protects slide contacts in electronic devices and automobiles from oxidation and sulfide. It has excellent lubrication properties, preventing wear on contacts and maintaining durability. 【Features】 - It does not drip and maintains rust prevention and lubrication effects over a long period. - It has excellent lubrication properties at low temperatures. - Being a non-silicone type, there is no concern about contact failure due to low molecular siloxanes. - It does not use mineral oil or solvents, so it does not corrode most materials. 【Applications】 - Protection of slide contacts in electrical devices and automobiles - Lubrication of contacts in electronic device connectors, slide potentiometers, tuners, etc. 　　　◆◇For more details, please refer to 'Download' or 'Request for Information'◇◆

• Lubricants
• others

● This is a halogen-free, matte resin-based RMA type flux that is optimal for lead-free solder on printed circuit boards. It is also compatible with tin-lead solder. ● It is filled in a pen-type container, allowing for precise application to the leads of electronic components or small pads for chip components where wettability is poor. ● Compared to conventional products, it has less stickiness, minimal flux residue, and is non-corrosive, offering excellent reliability. ● It complies with the RoHS directive.

• Printed Circuit Board
• Chemicals

● No substances that fall under the "Organic Solvent Poisoning Prevention Regulations" are used. ● No substances that fall under the "PRTR Law" are used. ● Chlorinated and fluorinated solvents are not used. ● Complies with the RoHS Directive.

• Chemicals
• others
• Cleaning agents

Two-component filling hardener

• others

Coating agent for repairing scratches and peeling of solder resist.

• others

Hayacoat-specific paint remover

• others

A coating agent that protects printed circuit boards and chassis of electronic devices from troubles caused by moisture, toxic gases, and salt damage.

• others

This is a coating agent for circuit boards that prevents rust due to moisture and has excellent electrical insulation properties. When sprayed on PC boards and chassis, it forms a strong film that prevents problems caused by moisture, harmful gases, and salt damage. It is particularly effective in preventing insulation degradation due to moisture in IC circuits with narrow pattern spacing on PC boards. 【Features】 ● Main component: Polyvinyl resin ● Appearance: Light yellow transparent (in the case of clear) ● Volume resistivity: 430,000,000,000,000 Ω·cm ● Dielectric breakdown value: 12 (kV/0.1 mm) ● Dielectric constant (1 kHz): 3.2 ● Dissipation factor (1 kHz): 0.0063 ● Touch dry time at 20°C, 50% RH: 5-10 minutes ● Heat and humidity resistance test: No change after 14 days

• Other consumables
• Chemicals
• Coating Agent

A coating agent for substrates that prevents rust due to moisture and has excellent electrical insulation properties.

• others

Handheld static electricity removal tool

• Ionizers and static eliminators

● This is a universal board the same size as the open-source microcontroller board "Arduino." ● The connector positions are aligned with the Arduino, allowing for a secure fit without misalignment. ● The signal names for each pin of the connector are printed in silk screen. ● It features large pads that make soldering easier. ● A connector for connections is included.

• Printed Circuit Board

A breadboard with a built-in power supply that can output three different voltages simultaneously with a single AC adapter.

• Embedded Board Computers

Compact DC variable power supply adopting a switching method.

• power supply

This is a compact dropper-type DC power supply with dimensions of W91×D164×H93mm. It is ideal for in-house training, learning, and experimental use. 【Specifications】 - Available in two types: finished product and assembly kit - Rated output voltage: selectable from DC 1.5V, 3V, 3.3V, 5V, 6V, 9V, 12V, 15V (tolerance ±5%) - Maximum output current: 0.8A - Weight: 1.4Kg 　　　◆ For product details, please refer to 'Download' ◆

• power supply
• power supply

An introductory kit for making photosensitive circuit boards that beginners can easily use.

• Printed Circuit Board
• others

This is an educational plan that organizes a curriculum for microcontroller education tailored to the customer's level and objectives, providing support for texts, course notes, and those responsible for internal instruction.

• Other embedded systems (software and hardware)
• Distance learning/E-learning
• Embedded Board Computers

This is the perfect teaching material for soldering skills training.

• Printed Circuit Board
• Distance learning/E-learning

Training for Lead-Free & Eutectic Soldering ● Ideal for training in lead-free and eutectic soldering. ● This kit allows training from tin-plated wire to the chip section. 【Board Specifications】 Board Material: Glass Composite External Dimensions: 88.9mm × 116.84mm × 1.6t Surface Finish: None (Please be careful not to touch directly with hands) *For included parts, prices, etc., please refer to the catalog. Feel free to contact us.

• Other cutting tools
• others

This is an introduction to the chemical polishing agent "Hayabright" handled by Sanhayato Corporation.

• Chemicals

Dobreit, ideal for removing copper foil stains from cut substrates.

• Chemicals

High-performance contact cleaning agent that does not use environmentally harmful substances.

• Cleaning agents

Cleaning agents for electronic devices made from materials that have minimal impact on the human body and the environment.

• Cleaning agents

Test clip for surface mount ICs that allows easy operation checks and signal extraction.

• Other safety and hygiene products

150°C heat-resistant test clips available in three types according to pitch.

• Other safety and hygiene products