米倉製作所 List of Products and Services

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

The "CATY-T3H SYSTEM" is a tabletop-sized high-temperature tensile observation device that allows for thermal fatigue testing while observing the state of the sample surface in real-time. It can be used with simple operations and supports high-temperature and high-speed heating. By adopting a dual-swing crosshead, it maintains the sample's position in the center even if the sample piece expands or contracts, thereby minimizing the displacement of the observation position. By combining with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Testing of not only metallic materials but also composite materials of surface-mounted components is possible. ■ Stress measurement, low-cycle fatigue testing, and creep testing can be conducted in gas flow or vacuum conditions. ■ Realization of combined testing for thermal fatigue under stress and real-time observation. * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

▼Example of Testing Machine Manufacturing▼ The description is just one example. For details, please check individual pages or feel free to contact us. Customization is also available. *Special order testing machines and high-temperature on-site observation furnaces are featured on separate pages. 1. Impact Testing Machines - Charpy (pendulum/instrumented/semi-automatic/manual/automatic specimen replenishment) for metals, non-metals, and plastics - Drop weight impact (drop/falling weight/instrumented) for metals, non-metals, plastics, carbon fibers, textiles, and automotive-related materials 2. Fatigue Endurance Testing Machines - Creep (servo electronic/weight type/multi-station/with constant temperature bath) for metals, ceramics, carbon fibers, plastics, and wires - Pulley fatigue for metals and products - Torsional fatigue for metals and plastics - Friction wear (thrust/reciprocating sliding/rotational) for metals, ceramics, and carbon fibers, and plastics 3. Other Material Testing Machines - Universal testing machine (tensile/compression/bending) for metals, ceramics, carbon fibers, plastics, and wires - Static torsion testing machine for plastics, rubber, etc. ▼Material Testing Machines at Yokokura▼ Since our establishment in 1980, we have been manufacturing testing machines. We consistently handle the design, development, manufacturing, maintenance, inspection, and repair of equipment, and with the accumulated know-how and technology, we have produced testing machines for various customers across different industries.

≪Points≫ 1. Highly customizable scalability We offer many customizations that can be changed according to the test content. 2. Diverse striker shapes The shape of the striker can be changed to match the test. 3. FFT analysis software Allows analysis of fracture behavior data with graphical representation of impacts. [Test Examples] Drop weight tests / Surface impact tests / Shock absorption tests / Penetration resistance tests / Large drop weight chain pull impact testing machine / Impact damage detection demonstrator tests / Impact testing equipment for damage detection tests. [Test Fixtures - Examples of Added Tips] Round bar striker Removable type fixture for surface impact Stage and surface impact fixture Fixtures for ice picks, butterfly knives, and fillet knives included. *We will design according to your requests, so please contact us for details.

Our company has a track record of creating testing machines related to the following. If you have any requests regarding other testing machines, please feel free to contact us. [ Fuel-related ] Injector durability device for poor fuel Fuel pump high-temperature durability testing device Fuel pump durability testing device Fuel pump flow measurement device Fuel pump and SIFS performance measurement device Direct injection Malvern bench [ Engine-related ] Valve seat cold and heat testing machine Valve guide sliding testing machine Exhaust system fastening part cold and heat fatigue testing machine Durability testing machine related Mud water durability testing machine Boot durability testing machine CVJ durability testing machine Propeller boot durability testing machine Rack boot high and low temperature durability testing machine [ Wheel and suspension-related ] Wheel rotation bending testing machine (VIA specification) Wheel drop impact testing machine (JIS/ISO) Drum durability testing machine Front fork friction testing machine Wheel lateral destruction measurement testing machine Testing machine for suspension and steering [ Spark plug-related ] SP heating load life testing machine SP dielectric strength testing machine For other achievements, please contact us.

The "OCT-equipped heating observation imaging furnace," which allows for direct observation of internal structural changes at high temperatures, has contributed to the study of changes in the internal structure of ceramics. It is a compact device utilizing a focused heating method and equipped with OCT (Optical Coherence Tomography) for internal observation. ◆ Key Points ◆ - Internal structure observation at high temperatures In-situ observation up to 1800°C - Understanding weight and thermal changes Clarifying the relationship between internal changes and temperature/weight changes - Excellent operability and controllability Data acquisition combining weight changes with temperature OCT is a technology that uses infrared laser light to visualize the interior of materials. It can be applied to materials such as ceramics and resins that allow infrared light to pass through. For more details, please refer to the catalog or contact us.

The "Chair and Office Chair Testing Machine" from Mikyo Manufacturing Co., Ltd. is a testing machine designed to conduct strength tests, fatigue tests, impact tests, and more, based on assumed environmental conditions. In addition to accommodating the shape and application of our customers' products and various standards, we also manufacture testing machines tailored to our unique evaluation criteria. Please feel free to contact us for custom or semi-custom testing machines that fit the size, application, and usage environment of your products. 【Product List】 ● Chair Strength Testing Machine (Single Series) ● Chair Strength Testing Machine (Triple Series, Long Chair Compatible) ● Caster Mobility Testing Machine ● Armrest Durability Testing Machine We also build systems that incorporate measurement result data and include automatic processing of measurement data. We provide a consistent production system to create the "testing machine you want." 【Recommended for the following people!】 ■ Those who want to conduct product testing in-house ■ Those looking to reduce external outsourcing costs ■ Those wanting to improve product development speed ■ Those wanting to conduct in-house standard-specific tests *For more details, please refer to the PDF document or feel free to contact us.

【Examples of Custom Test Equipment】 We manufacture test equipment tailored to the diverse needs of various customers across industries, and here are some examples of the test equipment we have produced. ■ Bearing-related ■ Furniture-related ■ Large-scale synchrotron radiation-related While the items we can showcase are limited, we produce a wide variety of test equipment. Why not consider creating a one-of-a-kind test machine utilizing our expertise in materials testing? [Examples of Materials Testing Equipment] Impact testing machines (Charpy/Dropping weight/Falling drop)/Fatigue endurance testing machines (Creep/Pulley)/Friction and wear (Thrust/Reciprocating sliding/Rotating)/Universal testing machines/Static torsion testing machines 【Custom Test Equipment at Yokokura】 Since 1980, we have been creating original test machines and devices alongside materials testing machines. We produce a variety of equipment for research and testing of unique new materials and products developed by our customers.

At Yokura Manufacturing, we manufacture equipment necessary for evaluating the durability and safety of battery materials and components for next-generation batteries, including all-solid-state batteries. We solve challenges in development and manufacturing with a custom-made approach. ◆ Small Vacuum Heat Seal Device for Glove Box This is a chamber-type vacuum heat seal device that thermally bonds cells, such as laminated (pouch-type) lithium-ion batteries, through heating and pressurization. ◆ Heating Device for All-Solid-State Batteries Compatible with Glove Box IR-HP/GB Depending on the material screening temperature characteristics, it heats and evaluates up to four solid-state batteries simultaneously without exposure to the atmosphere. For more details, please contact us.

Introducing the "Operational Monitoring System" that can detect the stopping and abnormalities of testing machines even while working remotely. "While working from a distance, I want to know the status of the testing machine." "Do you have concerns about reducing testing time losses?" Our "Operational Monitoring System" allows you to check the status of the testing machine from a remote location, whether you are in the office or working from home. It contributes to reducing the "effort" and "time" spent traveling to the distant location of the testing machine multiple times. Additionally, by applying technology, it also allows you to understand the operational rate and actual working hours of the testing machine. Results can be displayed in formats such as Gantt charts. 【Features】 ■ Remote status confirmation for multiple testing machines ■ Notifications of abnormalities or test completion via email ■ Compatibility with other companies' testing machines* ■ Customizable display content Other display contents can also be customized according to your requests. Please feel free to contact us. *Certain conditions must be met. For more details, please refer to the PDF document.

The representative heating observation IR imaging furnace from Mikyo Manufacturing has been equipped with a digital violet laser microscope. It enables clear microscopic observation in ultra-high temperature environments of up to 1800°C. Compared to conventional models, the resolution and brightness have improved by about two times*, allowing for observations with high magnification and high contrast. Please utilize it for research on the behavior of fine structures and material development under high temperatures in steel, non-ferrous metals, ceramics, secondary batteries, and more. *Compared to our conventional model "VL2000DX-SVF17SP" ◆ Key Points ◆ - High-resolution in-situ observation Obtaining high-resolution images under ultra-high temperatures - Realization of diverse observation conditions Rapid heating and rapid cooling up to 1800°C - Excellent operability and controllability High-speed image acquisition accurately linked to temperature By using the optional load mechanism module "SVF12FTC," observations can be conducted under stress loading (up to 5kN) at high temperatures. For more details, please contact us.

The "CATY-2000" is a versatile computer-controlled universal testing machine that meets diverse needs. It features a high-rigidity loading frame that is faithful to the basics. With complete automatic control via PC, it allows for the setting of various testing conditions. The adoption of Ethernet enables high-speed sampling control and makes it easy to link with other general-purpose software. It can accommodate all special specifications, including capacity, width, height, and speed. 【Features】 ■ High-rigidity loading frame ■ Capable of setting various testing conditions ■ High-speed sampling control enabled by Ethernet ■ Easy linkage with other general-purpose software *For more details, please refer to the PDF materials or feel free to contact us.

The "FRC-R" is a thrust direction sliding friction and wear testing machine that complies with JIS K7218-1986 Method A and Method B tests. It is designed to contact plastic test specimens in the form of square plates, discs, or hollow cylinders with the end face of a hollow cylindrical counterpart made of metal or other materials under a constant load, and to rotate either of them to wear down the plastic test specimen. It can accommodate pin-on-disk, ring-on-disk, and ring-on-ring testing methods. Optional equipment such as a constant temperature chamber, oil tank, and oil droplet unit are also available, allowing for friction and wear experiments under special conditions. 【Features】 ■ Complies with JIS K7218-1986 Method A and Method B tests ■ Optional constant temperature chamber, oil tank, and oil droplet unit available ■ Capable of conducting friction and wear experiments under special conditions *For more details, please refer to the PDF materials or feel free to contact us.

The "High-Temperature Atmosphere Tensile Testing Machine CATY-T3V" is a hybrid testing machine that can perform tensile tests in a vacuum and inert gas atmosphere, featuring a representative high-temperature heating furnace (IR image furnace) from Yokokura Seisakusho. ◆ Key Points ◆ - Maximum temperature of 1500℃ and maximum load of 10kN Tensile observation under ultra-high temperatures - Vacuum chamber structure Compatible with various atmosphere gases - Easy operation and installation Time-saving experiments Please contact us for more details.

The "FRC-S" applies a load and sliding friction to the sample to calculate the friction and wear coefficients. It is a friction and wear testing machine that can create data for evaluating friction characteristics and performance. It can control the maximum sliding frequency of 50Hz and a sliding distance from 1μm to 10mm. It can be used for evaluating the friction characteristics of products for automotive devices and mobile equipment, as well as for fundamental research, performance evaluation, and quality control of materials such as metals, plastics, and bearing materials. 【Features】 ■ Friction coefficient resolution of 0.01μm or higher. Capable of measuring even slight friction coefficients. ■ Achieves high-precision load control. ■ Sample heating is possible from 50 to 250°C. ■ Complies with industrial standards such as JIS standards for oil droplets/oil immersion. ■ Customizable through made-to-order production, accommodating a wide range of materials and products. *Additionally, you can view the "Comprehensive Catalog," which includes impact testing machines and fatigue durability testing machines, via "PDF Download." Please feel free to contact us for inquiries.

This is a testing machine that applies a certain force to test specimens such as polymer materials and metals, measuring the displacement over time. - Program pattern control using a servo motor - Capable of static tests, dynamic tests, and relaxation (stress relaxation) tests - Compatible with constant temperature and humidity chambers and tubular furnaces ★☆ Expanding the range of tests! Servo motor type ☆★ Safety: Automatic switching for load changes, lightweight operation, space-saving Efficiency: Supports tensile, compression, and bending tests by changing the chuck. Control: Composite testing is possible with program pattern control. Displacement of multiple test specimens can be displayed separately/customizable chucks!

Introducing a video about the testing machine manufacturer, Yonezawa Seisakusho, on our official YouTube channel! ≪Business Overview of Yonezawa Seisakusho≫ 1 [Material Testing Machines] Impact/Torsion Fatigue/Creep/Pulley Fatigue/Friction Wear/Static Torsion/Reciprocating Sliding/Universal Testing Machines, etc. 2 [Custom Testing Machines] Custom testing machines for products, custom testing machines for automotive-related parts, design/manufacture of automatic inspection lines, etc. 3 [IR Image Furnace (High-Temperature Observation Furnace)] 18SP - Maximum temperature 1800℃ / TPS - Maximum temperature 1500℃ when attached to existing microscopes / HP - Experiments on wafers, etc. 4 [System & Software] Automation of manual data input and measurement / Development of quality control software (proven track record with Access and Oracle databases) / Design and manufacture of small-scale centralized management systems / Sending and receiving commands and results with higher-level systems, etc. 5 [Minimal Fab] Oxide film formation process - Focusing heating / Resist removal process - Water plasma (using only ultra-pure water, no hazardous chemicals required for ashing), etc. 6 [AE] Non-destructive testing (ultrasonic, AE, magnetic) equipment ≪Major Clients≫ - Various manufacturers (automotive, steel, precision machinery, materials, semiconductors, etc.) - Universities and educational institutions - Public agencies and research facilities, etc.

**Main Products and Services** 〇 IR Imaging Furnace 　→ Real-time observation of behavior at high temperatures 　　・ High-temperature tensile observation device CATY-T3H 　　・ Compact high-temperature observation device TPS 　　・ Ultra-high-temperature observation device 18SP 〇 Material Testing Machines 　→ Apply loads to materials and products for measurement and analyze the results 　　・ Instrumented Charpy testing machine 　　・ Thrust friction and wear testing machine 〇 Custom Testing Machines 　→ Manufacture original devices that meet unique specifications 〇 System and Software Development 　→ Contribute to human error prevention and work efficiency improvement 〇 Minimal Fab 　→ Participate in a semiconductor manufacturing model for small-lot production in a cleanroom-less environment For more details, please contact us. We are happy to consult from a researcher's perspective.