Mywayプラス Product Lineup

We offer PV simulation software for developers of solar power inverters. By connecting a PC installed with the regenerative DC power supply pCUBE-H and the PV simulation software via LAN, you can simulate the operation of pCUBE-H as a solar panel. 【Features】 ■ Reproduces distant output changes of solar panels. Supports error analysis under low illumination. ■ Simulates panels that follow the MPPT control of high-speed inverters. ■ Supports a wide range from household use to mega-solar by increasing capacity through reconfiguration (series and parallel connections). ■ Flexibly accommodates high voltage solar panels up to 1000V. *For more details, please download the PDF or feel free to contact us.

• Software (middle, driver, security, etc.)

Myway Plus offers custom embedded modules for controlling inverters and motor drives. We provide an environment that easily enables Rapid Control Prototyping (RCP) with standard or custom embedded boards. You can run inverter control software validated with "PE-Expert4" on the embedded board to control and evaluate actual applications. Additionally, leveraging FPGA and DSP application technologies along with years of accumulated design assets in power electronics, we accept the development of custom boards and software that meet your specifications. 【Features】 ■ RCP Solution (Standard Embedded Control Board) ■ Mass Production Development Solution (Custom Board Development) *For more details, please refer to the PDF materials or feel free to contact us.

• Instrumentation and Control Systems
• Other FA equipment
• Other motors

The regenerative type DC power supply pCUBE achieves a fast current response of 3ms (for MWBFP3-1008) from maximum charging current to maximum discharging current during operation in CC mode. It is an ideal power supply for batteries that perform charging and discharging with current control. Customers can freely combine series and parallel configurations, allowing for flexible responses to battery capacity increases and battery pack testing. 【Features】 ○ Easily connectable in series or parallel like a battery, with changes made at will ○ Recovers 86% of energy, cutting down on energy waste ○ Achieves miniaturization through insulated bidirectional converter technology For more details, please contact us or download the catalog.

• power supply

"PE-Expert4" is a digital control system for power electronics equipped with a 1.25GHz DSP. By adopting a DSP that is more than five times higher in performance than conventional products and a unique bus communication method, processing speed has significantly improved, allowing for more efficient development of inverter and motor control as well as other power supply control. 【Features】 ○ Calculation processing time is 1/20 compared to conventional products ○ Synchronous control mode between boards ○ PE-View with limitless possibilities For more details, please contact us or download the catalog.

• Other process controls

The inverter unit equipped with SiC devices, "MWINV-1044-SIC / MWINV-5044-SIC," is an experimental inverter unit using SiC-MOSFETs manufactured by Rohm Co., Ltd. It is equipped with a gate driver, allowing inverter operation at a switching frequency of 200 kHz using only external signals. By combining it with a dedicated controller, the experimental environment can be set up in a short period. 【Features】 ○ Packed with functions necessary for experiments ○ Comprehensive protection features ○ High carrier, high voltage resistance, and high efficiency leveraging SiC ○ Suitable for evaluating not only inverters but also individual SiC devices For more details, please contact us or download the catalog.

• Inverter

It has been 20 years since we commercialized evaluation testing equipment for power electronics, and we have gained trust from various sectors. Based on the inverter technology and motor control technology we have cultivated so far, we are challenging new fields such as new energy and energy conservation, contributing to the reduction of the burden on the global environment. 【Business Content】 ○ Contract development, development consulting, and supply of OEM products using advanced technology ○ Provision of development support tools specialized for power electronics ○ Provision of evaluation equipment for motors and lithium-ion batteries ○ Provision of energy management systems for smart grids For more details, please download the catalog or contact us.

• Inverter
• Other process controls

PSIM is a circuit simulator developed for power electronics and motor control. It provides a powerful simulation environment for analyzing power electronics, designing control circuits, and researching inverters and motor drives, thanks to its high-speed simulation, user-friendly interface, and waveform analysis features. It is used in a wide range of industrial fields, including automotive, home appliances, aerospace, and renewable natural energy (such as wind power and solar power), for the verification of various applications such as switching power supplies, motor drives, and power conversion devices. For more details, please download the catalog or contact us.

• Inverter

The PE-Inverter series inverter unit is designed for research, development, experimentation, and embedded use. It is a unit that integrates the power circuits necessary for power conversion in inverters, various sensors, and protection circuits. You can use three optimal types of units in the most suitable configuration. It is recommended for researchers and developers involved in motor control and power conversion control using inverters, as well as testers evaluating and testing motors and power conversion devices through inverter control. By connecting to our digital control system for power electronics, PE-Expert, you can easily build an inverter control system. For more details, please download the catalog or contact us.

• Inverter

pMOTION(R) drives various motors in conditions close to real environments and automatically performs various measurements. You can choose between the multi-inverter "pMOTION-Driver," which effectively utilizes test benches, and the motor performance evaluation system "pMOTION-Complete," which comes fully equipped with all the necessary equipment for testing, depending on your needs. With "pMOTION-Complete," you can evaluate motor performance simply by providing the motor under test. The built-in multi-inverter drives various motors and performs various measurements quickly and fully automatically through an easy-to-use user interface. It reveals the characteristics of the motor and significantly accelerates product development. "pMOTION-Driver" is a multi-inverter compatible with various motors, including IPM, IM, and SRM. It allows for motor driving in conditions close to real environments by installing user-defined map-like characteristic data. As a top runner in motor control, it achieves high-speed current response and high-precision program operation through high-efficiency digital control (HeDCT). For more details, please contact us or download the catalog.

• Inverter

The battery charging system / regenerative type direct current "pCUBE(R)" is the ideal testing system for evaluating the charge and discharge of Li-ion batteries. It is equipped with all the necessary equipment for battery evaluation, including the high-efficiency regenerative power supply pCUBE, a data logger, and easy-to-use software, allowing you to confidently conduct comprehensive battery evaluation tests immediately after purchase. Myway Plus has consolidated its accumulated power electronics technology and adopted a master-slave configuration using its unique high-speed communication technology, enabling not only parallel connections but also expansions through series connections. This flexibility in reconfiguration and addition allows for quick adaptation to changes in battery capacity due to advancements in research and development or changes in standards, ensuring that investments are not wasted. It supports efficient and comfortable development, accelerating the evolution of batteries. For more details, please contact us or download the catalog.

• Charger
• power supply

The regenerative type DC power supply pCUBE allows customers to freely combine series and parallel configurations, enabling flexible responses to battery capacity increases and battery pack testing. As a top runner in regenerative power supplies, it achieves compactness and high efficiency (regenerative efficiency of 86%) while realizing fast current response and high-precision program operation through high-efficiency digital control technology (HeDCT).

• Other power sources

The Myway Plus EV/HEV motor performance evaluation system drives various motors in conditions close to real environments and performs various measurements automatically. You can choose between pMOTION-Driver, which effectively utilizes assets like motor benches, and pMOTION-Complete, which comes fully equipped with all the necessary equipment for testing, depending on your needs.

• Testing Equipment and Devices