日東工器 List of Products and Services

This product is an aluminum chip specifically designed for the Circuit Beveller CB-01. It is a throwaway chip that achieves a smooth finish. The chamfering capability ranges from C0 to C1, with minimal welding and a clean finish. All three sides can be used. We also offer chips for soft steel and stainless steel. 【Features】 ■ Throwaway chip that achieves a smooth finish ■ Chamfering capability from C0 to C1 ■ Minimal welding and a clean finish ■ Usable on all three sides *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The cutting fluid recovery unit (model: HK-400A) is a device that collects small amounts of cutting fluid spilled from machine tools. It can be installed on the side of the machine using magnets and contributes to energy savings by switching from the ejector. Additionally, it comes with a strainer to prevent chip suction, so there is no concern about motor burning during dry operation. 【Features】 ■ Installed on the side of the machine with magnets ■ No air piping required ■ Contributes to energy savings by switching from the ejector ■ Comes with a strainer to prevent chip suction ■ Capable of gas-liquid mixed suction ■ No concern about motor burning during dry operation ■ DC24V drive *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

This catalog introduces the assembly and installation of the air piping system "Air Liner" handled by Nitto Kohki Co., Ltd. We hope you find it useful for reference regarding piping layouts and installation methods. Our product is a revolutionary air piping system that achieves lightweight design, significant reduction in installation time, excellent corrosion resistance, and easy installation through the combination of aluminum pipes and resin fittings. In some cases, the total cost of materials and construction may be lower compared to SGP pipes. It is very cost-effective as the added value after installation is sustained. [Contents (excerpt)] ■ Features of Air Liner ■ Installation examples of Air Liner (case studies) ■ Advantages of Air Liner ■ List of piping components for Air Liner ■ Components of Air Liner *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

Medoburo is a blower that boasts high durability, energy efficiency, low operating noise, and no need for lubrication, thanks to its linear drive free piston system. The outer casing is made of resin, so grounding work is unnecessary. We provide a "Maintenance Manual" and various spare parts for maintenance convenience for maintenance contractors. 【Features】 ■ Long lifespan ■ Low operating noise ■ Easy maintenance ■ Includes a strainer to prevent chip suction ■ Does not stop suddenly ■ Oil-free clean air ■ AC100V operation *For more details, please refer to the PDF document or feel free to contact us.

• Filtration Equipment
• Wastewater/wastewater treatment equipment
• Other water treatment equipment

The "HHV Coupler" is a rapid fluid connector for high-pressure hydrogen filling. It is used at hydrogen stations nationwide, including in Toyota's new fuel cell vehicle, the MIRAI. Please download the catalog and take a look. For product details, please refer to the PDF materials or feel free to contact us.

• Coupling

The "High Coupler 60SM" is a versatile coupler that connects from the air piping in the factory to the hose connection for air tools. Important components are hardened to improve strength, particularly excelling in wear resistance and durability. The "NK Coupler Hose with Full-Broke Coupler" comes standard with a spring nut that prevents hose bending and a urethane hose that offers excellent flexibility, durability, and wear resistance. The socket is equipped with a built-in "locking mechanism" that locks the sleeve to prevent accidental disconnection. 【Features】 "High Coupler 60SM" - Can be directly connected to existing air main piping (Rc3/4) and small diameter fittings. - Mounting part size and shape: R3/4 (male thread) "NK Coupler Hose" - Achieves low pressure loss and high flow rate. - One-touch connection. - When disconnecting, it exhausts residual pressure from the plug side, eliminating unpleasant noise and recoil. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• Pneumatic Equipment
• Coupling

This catalog features products compatible with automatic machines handled by Nitto Kohki. Among them, the 20mm wide belt, "Belton," is particularly suitable for deburring curved sections, and we also introduce a variety of products such as the electric driver "Brushless Delvo C Series Model DLV45C," which allows for a maximum of 30 torque settings with a single unit. We have also prepared usage case videos for each product, so please take a look at the videos below. 【Featured Products】 ■ Pneumatic belt sander "Belton" Model: B-20CL-01 ■ Pneumatic die grinder "Airsonic" Model: L-35C-02 ■ Dual action air sander "Orbital Sander" Model: APS-125-01 ■ Quick fluid couplings "Coupler" ■ Electric driver "Delvo" Models: DLV04C/DLV10C/DLV45C *For more details, please refer to the PDF document or feel free to contact us.

• Articulated Robot

This catalog is a proposal catalog regarding the equipment installation of linear products such as pumps and compressors handled by Nitto Kohki, as well as the quick fluid connector "Coupler." We have included a performance summary table of pumps that solves the troubles of product selection during equipment installation. We hope you find it helpful. At the end of the catalog, we introduce case studies of pump applications and adoptions. Please feel free to download and take a look. [Contents] ■ Performance summary table of linear products ■ Introduction of the features of linear products ■ Introduction of the "Coupler" ■ Application examples *For more details, please refer to the PDF materials or feel free to contact us.

• Other cleaning machines
• Other pumps
• Vacuum Equipment

This catalog showcases the quick fluid couplings "couplers" handled by Nitto Kohki and examples of linear products such as compressors. It features numerous installation examples for the medical and scientific industries. Please feel free to download and take a look. 【Contents】 ■ Introduction to Couplers ■ Introduction to Linear Products ■ Installation Examples *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

This catalog features case studies on the electric driver "Delvo" handled by Nitto Kohki. We hope it will be helpful when constructing and managing screw tightening lines. Please feel free to download and take a look. 【Contents】 ■ Examples of systems for preventing mistakes ■ Visualization of work conditions ■ Screw tightening automation ■ Product introduction *For more details, please refer to the PDF document or feel free to contact us.

• Assembly robot
• nut
• bolt

This catalog features the door closer "Auto Hinge." It includes products such as the "Center Hinge" which is a door-integrated hinge with a self-closing function, the "Hinge Type" which incorporates a door closer function into the hinge, and the "Sliding Closer" which offers quiet and smooth opening and closing along with excellent workability, all designed to achieve a sleek, armless door. *For more details, please refer to the PDF document or feel free to contact us.*

• Office furniture

"Akepita" is a lightweight retrofitted closer for sliding doors. With simple installation, it provides a convenient self-closing function that can be added to existing sliding doors (floor V-rail and Y-rail types) (for sliding doors with a closing force of 7N or less). It is a universal type that can be used on both the left and right by simply changing the installation direction. Please download the catalog and take a look. 【Set Contents】 ■ Closer main unit (with rack) ■ Cover ■ + Pan head wood screw φ4.1×38 (for main unit installation) ■ + Round head wood screw φ3.8×13 (for cable bracket installation) ■ Cable bracket V ■ Cable bracket H ■ Bracket protective cap *For more details, please refer to the PDF document or feel free to contact us.

• Office furniture

"Delvo" has been certified as a UR+ product by Universal Robots. UR+ refers to a range of peripherals that can be used with UR robots in a plug-and-play manner, including various peripherals and application kits. 【Certified Products】 ■ "Brushless Delvo C Series" (Current Control Type) "DLV45C" ■ Controller for DLV45C "DCC0241X" 【Dedicated Software】 URCap provides a program to operate the electric driver in conjunction with Universal Robots and the controller DCC0241X-AZ, as well as the ability to change controller settings from the teach pendant. It can be downloaded for free. *For more details, please refer to the PDF document or feel free to contact us.

• Articulated Robot
• Torque Control
• PLC

The Jet Chisel is a tool that uses a hard steel wire needle at its tip to perform a reciprocating motion, striking the surface of the target object. The air-powered high-speed multi-needle chisel "Jet Chisel JT-10" is the smallest and lightest model ever, reducing the burden of work. It features a flow adjustment function that does not require tools, making it possible to perform delicate paint stripping without damaging the workpiece, as well as deburring die-cast parts and removing welding scale. 【Features】 1. Ultra-lightweight and easy to grip even with anti-vibration gloves, featuring a slim design. 2. The first in the series to include a flow adjustment knob. 3. Equipped with a φ1.6mm needle suitable for fine work. 4. Needle replacement that does not require tools. *For more details, please refer to the PDF document or feel free to contact us.

• Air Tools
• Welding Machine

This catalog is a collection of problem-solving case studies that address the "troubles" encountered during the finishing and polishing of small die-cast parts and the chamfering of complex-shaped metal components. We have included many products from Nitto Kohki that perform deburring and polishing, so please feel free to download and take a look. [Featured Products] 1. "Compact Multi Sander" CMX-20 2. "Circuit Beveller" CB-01 3. "Super Hand Light" SHL-40 4. "Burr Cutter" BC-005 And many more *For more details, please refer to the PDF document or feel free to contact us.

• Air Tools
• cutter
• Power tools

The "Multi Coupler" MALC-01 type can be used as a standalone socket. The "Multi Coupler" MALC-01 type, MALC-SP type, and HSP type can be used in combination with plugs and sockets, and since the dimensions between plates are standardized to 30mm, they can be installed on the same plate. An eccentricity of up to φ2mm is permissible, so precise alignment during installation is not required. In addition to the MALC-01 type for low pressure, there are also the MALC-SP type for medium pressure and the MALC-HSP type for high pressure. 【Featured Products】 1. MALC-01 type (for low pressure) 2. MALC-SP type (for medium pressure) 3. MALC-HSP type (for high pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Injection Molding Machine
• Pipe Fittings

The "Vertical Frame Mounting Receiver LH Series" is an effective receiver for installing center-hung doors in locations where floor processing, such as in OA floors, is not possible. It significantly reduces changes in closing speed due to surrounding temperature fluctuations and is compatible with the fire door automatic hinges "AFD-22-M" and "AFD-22-B," ensuring safety during closure. [Featured Products] ■ "Vertical Frame Mounting Receiver LH Series" (3 types) ■ "Double Shaft Top Pivot NKOS Pivot" *For more details, please refer to the PDF document or feel free to contact us.

• Storage

This catalog features a wide range of products designed to solve issues that arise within factories, including fittings, machine tools, electric drivers, compressors, and air piping. [Contents] - Air piping that can be installed with a single touch: "Air Liner" - Fittings that make connecting and disconnecting pipes easy: "Coupler" - Consolidation of multiple electric drivers into one unit: "Delvo" - Machine tools that contribute to increased efficiency in tasks such as polishing, deburring, and angle processing - Long-lasting and quiet compressors *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

The auto-clamp unit for the "multi-coupler" is a product designed to be mounted on a plate with multiple piping joints, preventing the plates from separating due to fluid pressure. 【Features】 1. Maintains the connection between the plates of the "multi-coupler" 2. Equipped with a lock/unlock mechanism driven by air 3. Allows for the installation of proximity sensors The adapter for the "multi-coupler" MALC type enables direct connection to hoses with tapered threads without the need for threading the plate. 【Features】 1. Simplifies the processing of the mounting plate 2. Reduces the thickness of the mounting plate processing *For more details, please refer to the PDF document or feel free to contact us.*

• Pipe Fittings
• Water Hydraulic Equipment

The "Super Hand Light SHL-40" is a small air-powered file designed for small shaping tasks. It features a compact, lightweight, and low-vibration design that reduces the operator's load and contributes to increased work efficiency. We offer four types of file shapes suitable for various tasks. 【File Lineup】 1. Round File LF-10 2. Triangle File LF-11 3. Half-Round File LF-12 4. Flat File LF-13 *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing
• Other cutting tools
• Air Tools

The "Atla Ace ARA-100A" is a portable magnetic drilling machine designed for large diameter and deep hole manual operations. It detects overload work and lateral displacement, supporting smooth drilling through LED display. 【Drilling Capacity】 ● Jet Broach One-Touch Type 25L φ17.5–φ35 plate thickness 13–25mm 35L φ17.5–φ40 plate thickness 13–35mm 50L φ17.5–φ65 plate thickness 13–50mm 75L φ17.5–φ55 plate thickness 13–75mm ● Jet Broach 75L φ50–φ100 plate thickness 13–75mm ● High Broach One-Touch Type 25L φ17.5–φ35 plate thickness 13–25mm ● Twist Drill Maximum φ32

• Drill press

"Smocon" is a fire prevention and smoke exhaust system developed from years of experience. Please make use of the diverse range of "Smocon" models in your fire prevention and smoke exhaust equipment planning. [Contents] - System structure diagram - Automatic closing devices Electromagnetic release latch type (N-78B) Electromagnetic release built-in frame type (N-64D) Electromagnetic release exposed frame type (N-70A) Electromagnetic release floor stop type (N-73A) Electromagnetic release for sliding doors (N-78CN) Limit switches (N-81A/N-82A/N-83A) - Air supply openings *For more details, please refer to the PDF document or feel free to contact us.

• others

This catalog includes optional devices for the sliding door closer "Sliding Closer." 【Featured Products】 ■ Free Stop Device You can open the door to the desired position and release it to hold the door in an open state at any position. The stop is released when the door is moved towards the closing direction. ■ Pull-in Device It allows for strong pulling in from a position about 25mm before fully closed. This is effective when the electric lock latch is stiff or there is significant resistance due to sealing materials at the closing point. ■ Delay Device To ensure safe passage for the elderly, disabled individuals, or when moving in cargo, the closing time from the fully open position can be delayed. ■ Back Check Device This is a cushioning device that activates when the door is opened abruptly.

• others

The sliding closer is a specialized closer for sliding doors that opens lightly with a small force and closes quietly and reliably at your preferred speed. The CF series adopts a double rail specification for fire doors, supporting the door even during a fire. *This product is not certified as a fire protection device or a specific fire protection device (it cannot be certified as a closer alone). When using it for fire doors, please obtain individual ministerial certification or use it based on the structural specifications outlined in the Ministry of Construction notice. *For product details, please refer to the PDF materials or feel free to contact us.

• others

This catalog is a machinery product catalog for the construction industry. It features electric and battery-operated tools that are convenient for installing locks on-site. 【Featured Products】 Cordless Belt Sander Belton (Model: CLB-20) Electric Belt Sander Electric Belton (Model: EBS-10) Electric Mini File Electric Super Hand (Model: ESH-80A) *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing
• Power tools
• Other abrasives

A door closer is a product that allows doors to close quietly and safely. It is used in various doors around the world, including in medical facilities, offices, and transportation equipment. It automatically closes the door using the action of springs or hydraulics, eliminating the need for an arm and achieving a clean door design. This catalog features the "Auto Hinge Center Hinge Type," which is fully integrated into the door, with nothing visible from the outside. 【Features】 - Concealed type (built into the door) - A wide range of models and broad applicability - Suitable for fire prevention, smoke exhaust, constant opening and closing, and air supply doors - Easy installation with a slide receiving seat *For more details, please refer to the PDF materials or feel free to contact us.

• others

A door closer is a product that enables doors to close quietly and safely. It is used in various doors around the world, including in medical facilities, offices, and transportation equipment. It automatically closes the door using the action of springs or hydraulics, eliminating the need for an arm and achieving a clean door design. This catalog features the "Auto Hinge Hinge Type," which combines the functionality of a door closer with a hinge. It harmonizes with various doors and beautifully enhances the overall image. 【Features】 - Wide range of use (can be used for arch doors and doors without a top frame) - Built-in stop mechanism to hold the door in place (available in "S" model only) - Easy adjustment of closing speed with just one driver - Simple installation (same installation method as regular hinges) *For more details, please refer to the PDF materials or feel free to contact us.

• others

A door closer is a product that enables doors to close quietly and safely. It is used in various doors around the world, including in medical institutions, offices, and transportation equipment. It automatically closes the door using the action of springs or hydraulics, eliminating the need for an arm and achieving a sleek door design. This catalog features the high-performance sliding door closer "Sliding Closer," which excels in quiet and smooth opening and closing, as well as ease of installation. 【Features】 - Can close the door lightly with minimal force - Compact, lightweight, and long-lasting - Equipped with reinforced resin rollers and aluminum rails for very quiet operation - Easy and quick to install *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Electric Super Hand ESH-80A" is a compact electric file designed for small shaping tasks. It comes with a lineup of 10 types of files and saw blades suitable for various jobs. With its evolved features and a design that fits comfortably in the hand, it contributes to increased work efficiency. 【File Lineup】 1. Round File SF-10 2. Triangular File SF-11 3. Half-Round File SF-12 4. Flat File SF-13 *For more details, please refer to the PDF document or feel free to contact us.

• Hand polishing and filing

The "Electric Belt Sander EBS-10" is an electric belt sander. It is highly versatile and can be used for a wide range of tasks from deburring to finishing polishing. 【Standard Accessories】 Grinding Belt Z #60×10mm: 2 pieces (including 1 mounted on the main unit) Grinding Belt Z #80×10mm: 1 piece Grinding Belt Z #100×10mm: 1 piece Grinding Belt Z #120×10mm: 1 piece Hexagon Bar Wrench 2mm, 4mm: 1 piece each

• Hand polishing and filing

The "Mini Beveler CLMB-0202" is a rechargeable linear beveling machine. It takes 25 minutes to charge and can bevel 25 meters on a full charge. You can work without worrying about cords, contributing to increased work efficiency. 【Chip Lineup】 1. C-face chip 2. R2 face chip *For more details, please refer to the PDF document or feel free to contact us.

• Power tools

The "Circuit Beveller CLCB-0202" is a rechargeable beveling machine for curves. It takes 25 minutes to charge and can bevel 25 meters on a full charge. It is compatible with R3 and is effective in shipbuilding and bridge construction sites. 【Chip Lineup】 1. C-face chip 2. R2 face chip 3. R3 face chip *For more details, please refer to the PDF document or feel free to contact us.

• cutter

The "Mini Beveller CLMB-0202" is a rechargeable linear beveling machine. The "Circuit Beveller CLCB-0202" is a rechargeable curved beveling machine. Both are equipped with powerful batteries that fully charge in 25 minutes and can perform 25 meters of beveling on a full charge. 【Chip Lineup】 1. C Face Chip 2. R2 Face Chip 3. R3 Face Chip (for CLCB-0202 only) These machines are not only suitable for C face beveling work, which cannot be separated from can manufacturing and steel processing, but are also recommended for R face beveling work in the shipbuilding and bridge industries. *For more details, please refer to the PDF materials or feel free to contact us.

• Power tools

The "AtlaMaster M-250D" is a portable magnetic drilling machine that can accommodate commercially available twist drills. It combines strong magnetic holding power with a wide range of positional adjustment, supporting powerful drilling. 【Standard Accessories】(Cutting tools are not included) - Wrench 7×8mm: 1 piece - Wrench 35×41mm: 1 piece - Hexagonal rod wrench 2.5mm: 1 piece - Handle rod: 3 pieces

• Drill press

This catalog features the "Hydrogen Coupler Series," which includes quick fluid couplings for hydrogen. We offer a wide range of products, from low-pressure couplings designed for space-saving and lightweight applications to high-pressure couplings suitable for pressure and airtightness testing, with a maximum operating pressure of 87.5 MPa. [Featured Products] 1. H2-CZL Coupler (for low pressure) 2. H2-HSU Coupler (for medium pressure) 3. Receptacle/Simple Nozzle (for high pressure), etc. *For more details, please refer to the PDF document or feel free to contact us.

• Coupling

This catalog is a collection of product usage examples showcasing where our rapid fluid couplings and linear compressors can be utilized in a hydrogen society. [Featured Products] 1. H2-CZL Coupler (for low pressure) 2. H2-HSU Coupler (for medium pressure) 3. HHV Coupler (for high pressure) 4. VC0101-A1 (AC-driven diaphragm type compressor and vacuum pump) etc. *For more details, please refer to the PDF document or feel free to contact us.

• Coupling

The "Auto Hinge" type is a hinge that also functions as a door closer. It provides a clean finish to the appearance of the door, and its simple and beautiful design matches any door. This catalog features lightweight hinges for indoor doors. 【Featured Products】 1. Series 300 2. Series 1000 3. Series 2000 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Auto Hinge" type hinge is a hinge that also functions as a door closer. It provides a clean finish to the appearance of the door, and its simple and beautiful design matches any door. This catalog features heavy-duty hinges for indoor doors. [Featured Products] 1. Series 100 2. Series 200 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Auto Hinge" type is a hinge that also functions as a door closer. The appearance of the door is beautifully finished, and its simple and elegant design matches any door. This catalog features hinges for outdoor doors. The 700 series uses a special sealing structure and stainless steel materials, making it suitable for use in bathrooms and coastal areas. 【Featured Products】 1. 700 Series 2. 1000PC Series 3. 2000PC Series *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Auto Hinge" center-hung type is a door-integrated hinge equipped with a self-closing function. With excellent performance and durability, it is suitable for swing doors and fire doors. This catalog features the ADF series, which reduces changes in the closing time of fire doors even when the environmental temperature varies, thereby enhancing safety as a closing hardware. <Featured Products> AFD-8KH~AFD-22 + NKOS-M18 type AFD-30~AFD-35A + NKOS-M20 type *For more details, please refer to the PDF materials or feel free to contact us.

• others

The sliding closer opens easily with a small force and closes quietly and reliably at your preferred speed. It is a closer specifically designed for sliding doors. The NSC-CB series, featuring stainless steel components and a sealing structure, can be used stably for a long time even in high humidity environments such as bathrooms. 【Featured Products】 ■NSC-CB88 Bathroom Specification / For Steel Doors ■NSC-CBA88 Bathroom Specification / Compatible with Aluminum Automatic Door Frames (Built-in Type) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Maiton MYG-25L" is a compact and lightweight air grinder. Despite its small size, it is powerful and combines grinding capability with durability. 【Standard Accessories】 - 5mm Hex Bar Wrench: 1 piece - 19mm Wrench: 1 piece - Grinding Wheel GS#80×58: 1 piece The air grinder from the same series (Model: MYG-40R) and the air disc sander (Model: MYS-20L) have also been renewed. For details, please refer to the catalog below.

• Air Tools

The "Maiton MYG-40R" is a pneumatic grinder for medium grinding. It features a ring type and allows for powerful grinding compatible with a Φ105mm grinding wheel, enhancing work efficiency. 【Standard Accessories】 - 5mm Hexagonal Rod Wrench: 1 piece - 6mm Hexagonal Rod Wrench: 1 piece The MYG-40L featured in the video has a lock lever type.

• Air Tools

The "Maiton MYS-20L" is a compact and lightweight air disc sander (for disc paper). We offer sanding paper in sizes #40 to #320 for each pad size. 【Standard Accessories】 - Pads 1”, 1.5”, 2”: 1 each - 14mm Wrenches: 2 - Sanding paper 1” #60, #80, #100, #120: 2 sheets each - Sanding paper 1.5” #60, #80, #100, #120: 2 sheets each - Sanding paper 2” #60, #80, #100, #120: 2 sheets each

• Air Tools

The sliding door interlocking device (Model: SC-2SA) is a product that allows two doors to open and close in conjunction with each other when combined with standard set items. It is designed to reduce installation time by approximately 20% compared to conventional products. 【Specifications】 (Base models: NSC-C48/NSC-C88) - Applicable effective opening: 800–1500mm - Applicable door weight [total for 2 doors]: 80kg (up to 160kg*¹) - Applicable door thickness: 30–45mm - Minimum frame internal dimensions: H: 220mm D: 100mm*² *1: By using two sets of the standard closing device for the base model, it can accommodate up to 160kg. *2: In the case of a door thickness of 30mm and a gap of 10mm between doors. *For more details, please refer to the PDF document or feel free to contact us.

• others