ハギテック List of Products and Services

We would like to introduce our "Stainless Steel Nipples." Made of stainless steel, they can be used in clean environments and chemical lines, and are also suitable for high-temperature applications. We offer a wide variety of thread sizes, allowing us to accommodate any piping configuration. Additionally, most of our products are available for sale individually, minimizing waste. We can also manufacture special sizes and shapes through machining, so please feel free to consult with us. 【Features】 ■ Made of stainless steel, suitable for clean environments and chemical lines ■ A wide variety of thread sizes available, accommodating any piping configuration ■ Most products are sold individually, minimizing waste ■ Special sizes and shapes can be manufactured through machining *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a low-cost brass hose fitting. We offer a wide range of products including "brass hose nipples," "brass internal thread hose nipples," "brass L-shaped hose nipples," "hose joints," and "three-way hose joints." Please choose according to your application. 【Product Lineup】 ■ Brass Hose Nipples ■ Brass Internal Thread Hose Nipples ■ Brass L-Shaped Hose Nipples ■ Hose Joints ■ Three-Way Hose Joints *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

We would like to introduce our "PVC Nipples and Nuts." The material used is chlorine vinyl, which has excellent chemical resistance. Since a common nut is used for all sizes, cost reduction is possible. 【Features】 ■ The material used is chlorine vinyl, which has excellent chemical resistance ■ A common nut is used for all sizes ■ Cost reduction is possible *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a joint developed for hoses. It features a simple design where you just insert the hose into the joint and tighten it with a band. There are four sizes of connection screws available, allowing for a wide range of connections. The materials available are polypropylene (PP) and polyacetal (POM), so you can choose based on your application and model. 【Features】 ■ Joint developed for hoses ■ Simple design where you just insert the hose into the joint and tighten it with a band ■ Four sizes of connection screws available for a wide range of connections ■ Materials available are polypropylene (PP) and polyacetal (POM) *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a tube connector that has high transparency, can be repeatedly used in an autoclave (without load), possesses heat resistance, and has extremely excellent non-toxicity. It demonstrates excellent chemical resistance to most chemicals, has a melting point of 230-240°C, and also has a high softening point, making it suitable for use at high temperatures. With excellent heat resistance, transparency, and chemical resistance, it is used in a wide range of applications such as medical devices and laboratory equipment. 【Features】 - Excellent heat resistance, transparency, and chemical resistance - Superior electrical properties - Lightweight with a density of 0.83g/cm³ - Excellent safety for food hygiene - Superior peelability *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Polypropylene Tube Fitting" is a fitting for soft tubes such as silicone and Tygon. It uses inexpensive, sterilizable polypropylene and is compatible with semi-rigid tubes that have the same inner diameter as the outer diameter of the connection port, such as polyethylene and fluororesin. To prevent the tube from coming off, the use of a band is recommended. 【Features】 ■ For soft tubes such as silicone and Tygon ■ Compatible with semi-rigid tubes that have the same inner diameter as the outer diameter of the connection port ■ Made of inexpensive, sterilizable polypropylene ■ Odd type for outer diameter of the connection port *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings

We would like to introduce our "Mini Connector." The material used is polypropylene that complies with food hygiene standards. It meets RoHS regulations and is also compliant with REACH regulations, making it a cost-effective Japanese-made fitting that can significantly reduce costs. Additionally, the tubing can be used with both soft and hard materials, and for soft tubing, it is possible to use tubing with a diameter smaller than the compatible size. 【Features】 ■ Made of polypropylene that complies with food hygiene standards ■ Complies with RoHS regulations and is also compatible with REACH regulations ■ A cost-effective Japanese-made fitting that can significantly reduce costs ■ Can be used with both soft and hard tubing ■ For soft tubing, it is possible to use tubing with a diameter smaller than the compatible size *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings

The "EJ-SUS series" consists of stainless steel fittings manufactured using Metal Injection Molding (MIM = powder metallurgy through injection molding). We offer a wide range of products including "Straight Adapters," "Equal Tees," "Equal Elbows," "Reducing Straights," and "Equal Ys." Please choose according to your application. 【Product Lineup (Excerpt)】 ■ Straight Adapter ■ Equal Tee ■ Equal Elbow ■ Equal Straight ■ Reducing Straight *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "EJ Fitting Antibacterial" series is designed to suppress the adhesion of microorganisms to the surface of fittings and the formation of biofilms by adding silver-based antibacterial agents to the main material. We offer a wide range of products, including "Straight Adapters," "Equal Tees," "Equal Elbows," "Elbow Adapters," and "Tee Adapters." Please choose according to your application. 【Product Lineup (Excerpt)】 ■ Straight Adapter ■ Equal Tee ■ Equal Elbow ■ Equal Straight ■ Elbow Adapter *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "EJ System" is a ready-made small plastic fitting created with the concept of being "affordable" and "easy to use." The biggest feature of this product is the completely removed parting line from the bamboo shoot and taper section. By eliminating the parting line, which has previously been a cause of subtle leaks, the adhesion between the bamboo shoot and the tube has significantly improved, preventing minor leaks. With a wide variety of shapes and sizes, as well as four selectable materials, it can be used for piping applications in various types of equipment. 【Features】 ■ A wide range of ready-made sizes and shapes ■ Four types of plastic can be selected according to the fluid and environment ■ Lightweight and rust-free ■ High cost performance ■ Significantly improved adhesion between the bamboo shoot and the tube, preventing minor leaks *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Fluororesin GL14 Joint" is a connector that allows for the connection of semi-rigid and rigid tubes, glass tubes, metal pipes, and flexible tubes, enabling both same-diameter and different-diameter connections. By attaching a separately sold screw joint set for GL14 semi-rigid tubes to the GL14 connector body with screw specifications, semi-rigid and rigid tubes with an outer diameter of 1/32" to 8mm can be connected. Additionally, by attaching a separately sold hose connector for GL14 flexible tubes, flexible tubes with an inner diameter of 8 to 10mm can be connected. 【Features】 ■ Allows for the combination of semi-rigid and rigid tubes, glass tubes, metal pipes, and flexible tubes for same-diameter or different-diameter connections ■ Semi-rigid and rigid tubes with an outer diameter of 1/32" to 8mm can be connected ■ Flexible tubes with an inner diameter of 8 to 10mm can be connected ■ Freely combine connections such as glass tubes and flexible tubes *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Fluororesin GL18 Joint" is a connector for connecting semi-rigid tubes made of fluororesin and other materials, glass tubes, and metal pipes. By attaching the separately sold GL18 screw joint set to the GL18 connector body with screw specifications, connections of the same or different diameters with outer diameters ranging from 1/16" to 10mm can be made. Additionally, if you need to change the outer diameter of the tube, you can simply replace the inner spare parts set of the screw joint set to make the connection. 【Features】 - For semi-rigid tubes and rigid tubes made of fluororesin and other materials - Capable of connecting same or different diameters with outer diameters from 1/16" to 10mm - If changing the tube's outer diameter, you can connect by only replacing the inner spare parts set of the screw joint set - Operating temperature range: -50 to 150°C, pressure resistance 1000kPa *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a half union made of PCTFE. The maximum outer diameter of the bamboo shoot section is φ3mm. The male thread dimensions include "M9P1 thread length 8L," as well as options like "R1/8" and "M6P1 thread length 8L." Please use it by pressing in a soft tube. 【Product Lineup】 ■612-2689-001 (Male thread dimension: M9P1 thread length 8L) ■612-2689-002 (Male thread dimension: R1/8) ■612-2689-003 (Male thread dimension: M6P1 thread length 8L) ■612-2689-004 (Male thread dimension: 1/4-28UNF thread length 8L) *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a fitting that securely locks with a nut tightening mechanism. The body is made of PVDF, and the nut is made of polypropylene (PP), suitable for soft PE tubes, nylon tubes, and more. It excels in water resistance and durability, making it widely applicable in production lines, machine tools, food machinery, and medical device components. 【Features】 - Excellent water resistance and durability - Secure locking with nut tightening - Widely applicable in production lines, machine tools, food machinery, and medical device components *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a fitting that securely locks with a nut tightening mechanism. It is made of glass fiber reinforced polypropylene (PP), with a temperature range of 4 to 90°C and a maximum operating pressure of 1.4 MPa (at 20°C). It excels in water and chemical resistance, making it suitable for a wide range of applications including production lines, machine tools, food machinery, and medical device components. 【Features】 - Excellent water and chemical resistance - Secure locking with nut tightening - Suitable for a wide range of applications including production lines, machine tools, food machinery, and medical device components *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings

Introducing the "1-Inch Fitting Series" handled by HagiTech. No need for sleeve pressing, tube heat treatment, or large jigs. Simply cutting grooves into the outer diameter of the tube with a grooving cutter allows for easy installation, making it ideal for sites that dislike expensive jigs and labor-intensive processes. 【Features】 ■ 1-inch diameter fittings ■ No need for sleeve pressing or tube heat treatment ■ No need for large jigs ■ Easy installation by simply cutting grooves into the outer diameter of the tube with a grooving cutter *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings

The "Soft & Semi-Rigid Tube Connector" is a product that connects thin-walled soft millimeter tubes made of materials like silicone and Tygon with thin-walled semi-rigid inch tubes made of materials such as polyethylene and fluororesin. The semi-rigid tube can be easily connected without the need for processes like flange (flare) machining. The screw standard for connecting the connector and nut is 1/4-28UNF, and it comes as a set with connectors for soft tubes, PEEK nuts for semi-rigid tubes, SUS ferrules, and ETFE ferrules. 【Features】 ■ RoHS compliant ■ Semi-rigid tubes can be easily connected without processes like flange machining ■ The screw standard for connecting the connector and nut is 1/4-28UNF ■ Autoclave sterilization (+121℃), gamma ray and EOG sterilization possible *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a lightweight screw joint made entirely of resin. The maximum operating pressure is 0.8 MPa, and the maximum operating temperature is +80°C. It has excellent chemical resistance and corrosion resistance. It is suitable for applications requiring chemical resistance, or when metal joints cannot be used, or when aiming for weight reduction and cost savings. 【Features】 ■ Excellent chemical resistance and corrosion resistance ■ Lightweight due to being made entirely of resin ■ Maximum operating pressure: 0.8 MPa ■ Maximum operating temperature: +80°C *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is an adapter for connecting semi-rigid and rigid tubes such as fluororesin, glass tubes, and metal pipes, featuring a flat bottom port with a 1/4-28UNF female thread. The length of the female thread section is 7mm, and it can connect to separately sold PTFE tube flanged fittings or adapters with the same male thread standard. The connector body and the included set of two types of sealing rings are made of PTFE, and the cap is made of glass fiber reinforced PTFE. 【Features】 ■ With 1/4-28UNF female thread ■ Body bore diameter is 0.8mm or 1.6mm ■ Operating temperature: -200 to +250℃ ■ Autoclave sterilization (at +121℃) is possible ■ Pressure resistance of 500kPa (at room temperature) *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Conductive PTFE Fitting" is a product that has been endowed with conductive properties by adding a very small amount of long carbon nanotubes to PTFE. Traditionally, adding carbon black was the common method to impart conductivity to fluoropolymer resins, but it required a large addition of 20-30% (by weight), which was a drawback. The conductive PTFE used in this product significantly enhances conductivity and thermal conductivity by incorporating an extremely small amount of long carbon nanotubes. 【Features】 ■ Conductivity equivalent to resins with a few percent of carbon added ■ Volume resistivity of 102Ωcm with an addition of 0.05wt% ■ High thermal conductivity with excellent precision during processing ■ Thermal conductivity of 0.64W/(m·K), 2.6 times that of the base material with an addition of 0.05wt% ■ No shedding due to the carbon content being 1/1000 ■ No TOC detected in a 24-hour test with pure water *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is a reducing fitting made entirely of PFA for the fluid contact part. One side is available in sanitary 1S and 1.5S. The tube connection side features a barrel-shaped outer diameter crimping structure. 【Features】 ■ Reducing fitting made entirely of PFA for the fluid contact part ■ One side available in sanitary 1S and 1.5S ■ Tube connection side features a barrel-shaped outer diameter crimping structure ■ RoHS compliant *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

We would like to introduce the "Three-Seal Joint Series" handled by Hagi Tech. The PTFE-made abacus-type seal fixes PTFE or PFA tubes from the outer diameter by crimping. However, in the case of glass or stainless steel tubes, unlike resin tubes, there are instances where it cannot bite in and may slip out. The three-seal joint sandwiches two FKM O-rings with a PTFE ring to secure the outer diameter of hard piping, making it less likely to slip and providing a more secure fixation compared to traditional PTFE abacus-type seals. 【Lineup (Excerpt)】 ■ PTFE Three-Seal Type I Joint ■ PTFE Three-Seal Type L Joint ■ PTFE Three-Seal Type T Joint ■ PTFE Three-Seal Half Male Joint Type I ■ PTFE Three-Seal Half Female Joint Type I *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Fluororesin Screw Cap Adapter" is a product with NPT male threads designed to connect thick-walled semi-rigid tubes, rigid tubes, glass tubes and rods, as well as metal pipes and rods. There are two types of tube connection sections available: one for metric standard tubes and one for inch standard tubes. It allows for the passage of connectors without cutting the tubes, making it convenient for inserting sampling tubes, probe sensors, thermometers, etc., into containers. 【Features】 ■ Allows for the passage of connectors without cutting the tubes ■ Two types of tube connection sections available ■ Autoclavable sterilization (at +121℃) ■ The tube is securely fixed from the outside by tightening the cap with a taper ring and clamp ring *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

This product is an all-fluoropolymer connector for connecting semi-rigid and rigid tubes made of fluoropolymer and other materials, as well as glass tubes and metal pipes, with an outer diameter of up to 16mm. The operating temperature ranges from -200 to 250°C, and the pressure resistance is 500 kPa (at room temperature). It is capable of autoclave sterilization (+121°C). 【Features】 ■ Connects semi-rigid and rigid tubes made of fluoropolymer and other materials, as well as glass tubes and metal pipes, with an outer diameter of up to 16mm ■ Capable of autoclave sterilization (+121°C) ■ Operating temperature: -200 to 250°C ■ Pressure resistance: 500 kPa (at room temperature) *For more details, please refer to the related link page or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Chemifit CP Series" is a sealing joint made from a special polypropylene resin. Due to its injection-molded design, it has excellent internal surface smoothness and is lightweight. It has undergone ultrasonic cleaning, and no oils or fats were used during assembly, making it dust-free and highly non-contaminating. 【Features】 ■ Undergoes ultrasonic cleaning and no oils or fats are used during assembly ■ Dust-free and highly non-contaminating ■ Made from special polypropylene resin ■ Excellent internal surface smoothness due to injection molding ■ Lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "Quick Seal Series" is a screw-type fitting. It features an insert type, providing high sealing performance. Only the connector has been treated for sealing, excelling in pressure resistance and vibration resistance. 【Features】 ■ Screw-type fitting ■ High sealing performance due to the insert type ■ Compliant with JIS B 8381-1995 ■ Excellent pressure resistance and vibration resistance ■ Only the connector has been treated for sealing *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

We would like to introduce 'Z Union' handled by Hagi Tech. The maximum operating pressure is 0.78 MPa (8 kgf/cm²), and the maximum operating temperature is +80°C. Two types of materials are available: polypropylene, which excels in chemical resistance and corrosion resistance, and acetal, which is superior in friction and wear resistance. Additionally, we can also provide custom-made products in polyvinylidene fluoride, so please feel free to contact us when needed. 【Features】 ■ Excellent chemical resistance and corrosion resistance (polypropylene) ■ Excellent friction and wear resistance (acetal) ■ Maximum operating pressure: 0.78 MPa (8 kgf/cm²) ■ Maximum operating temperature: +80°C ■ Custom-made products in polyvinylidene fluoride are also available *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "SUS Joint" is a product that excels in pressure resistance and is also excellent for repeated attachment and detachment. The materials for the joint body, nut, and ferrule are all made of SUS316. It can be used in a wide temperature range of -196 to 600°C and is suitable for vacuum lines up to approximately 700 mmHg. 【Features】 ■ The materials for the joint body, nut, and ferrule are all made of SUS316 ■ Excellent pressure resistance and also superior for repeated attachment and detachment ■ Usable in a wide temperature range of -196 to 600°C ■ Suitable for vacuum lines up to approximately 700 mmHg *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

We would like to introduce the "PFA Tube Fittings" handled by Hagi Tech. This product uses PFA (body, nut) and PTFE (ferrule), which have excellent chemical resistance, and complies with RoHS. We offer a lineup that includes "PFA Straight Union," "PFA Union Elbow," and "PFA Male Connector." 【Lineup】 ■ PFA Straight Union ■ PFA Union Elbow ■ PFA Union Tee ■ PFA Male Connector *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

"MS Lock" is a reliable tube joint for connecting PTFE, PFA tubes, and more. By using a dedicated groove cutter for this product to create a groove in the tube, inserting a ferrule into it, setting it in the MS Lock body, and simply tightening it with a nut, a secure connection can be achieved. Since it employs a trapezoidal screw, it can be tightened firmly without crossing the screw threads, and the nut has a hexagonal knurled design, making it easy to tighten by hand and also allowing for tightening with a wrench. 【Features】 ■ A secure connection can be made simply by tightening with a nut. ■ It can be tightened firmly without crossing the screw threads. ■ Easy to tighten by hand, and can also be tightened using a wrench. ■ The body and nut are made of PFA injection molded products. ■ Excellent chemical resistance and low cost. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

The "F-LOCK30 series" features a tapered shrink seal structure with a tapered shape on the outside of the body. It maintains high sealing performance simply by inserting a tube into the body and tightening the nut. No special tools are required for installation, making it easy to perform, and it is economical and straightforward to choose between inch and millimeter sizes. The maximum operating temperature is +100°C, and each unit is inspected, cleaned with ultrasonic washing, packaged, and shipped. 【Features】 ■ Maintains high sealing performance ■ Easy installation without the need for special tools ■ Economical and easy selection between inch and millimeter sizes ■ Excellent chemical resistance ■ Simple and cost-effective setup *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings
• tube
• joint

- Excellent followability (supports bending and stretching) - Strong adhesion - Excellent slip properties - Since it is a room temperature curing type, coating of large molded products is possible. (*Curing time can be shortened)

• Chemicals

● Hoses and ducts with an outer diameter of up to 63.5mm (2-1/2 inches) can be cut. (Metal braided hoses and metal coils cannot be cut as they will cause blade chipping.) ● It uses a replaceable blade system, making it economical. ● There are screw holes in the main body, allowing it to be mounted on a base or similar setup.

• hose

- Due to thermal shrinkage, it shrinks radially, so if there is a flange at the end, the workability of the coating is improved when covering long lengths. - Made of ethylene propylene rubber, it has excellent weather resistance. - A flame-retardant type is also available. (Product name: NPI-N)

• Other machine elements

It is made of highly reliable materials that can withstand high temperatures and harsh working conditions, and it is compatible with a wide range of chemicals from organic solvents to alkalis and acids.

• Pipe Fittings

Overall length: approximately 370 mm Width: approximately 70 mm Height: approximately 150 mm

• Other machine elements

The "Fluororesin High-Pressure Hose" is made by processing fluororesin into a tubular shape and is reinforced with stainless steel wire and strong fibers. It features excellent solvent resistance. It is lightweight and flexible, and it also has outstanding fatigue resistance against repeated impact pressure. The hose can handle steam pressure to hydraulic pressure up to a maximum of 30MPa, and we offer various options to meet customer needs. Please feel free to consult us regarding the hose diameter, fitting size, material, etc. 【Features】 ■ Tubular processing of fluororesin ■ Structure reinforced with stainless steel wire and strong fibers ■ Various pressure resistance options available based on customer needs (steam pressure to hydraulic pressure: MAX. 30MPa) ■ Heat resistance: -65 to 230℃ ■ Standard inner diameter of the hose: φ4 to φ25 *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose
• Tubes and hoses

This product is a hose designed for maintaining and raising the temperature of water, oil, air, and solutions, as well as preventing solidification and freezing, and preventing the increase in viscosity of mucus, resins, and fats during constant temperature transfer. It is designed and manufactured to suit the conditions and usage at the site. A significant advantage is that it can free customers from the hassle and costs associated with heater tracing, insulation construction design, and related work. We also offer various controllers for temperature regulation and built-in self-regulating thermostats. Please feel free to consult us. 【Features】 ■ Operating temperature can be set from 0°C to a maximum of 500°C ■ There is almost no variation in temperature distribution ■ Operating pressure can be designed from low pressure (micro pressure) to ultra-high pressure up to a maximum of 35 MPa ■ Safe to use due to carefully selected materials *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose

This product is a steam hose made from a fluoropolymer resin tube. The pressure-resistant layer uses stainless steel wire or high-strength fibers, ensuring stable pressure resistance and durability. Depending on the application, we offer an external spring type and an insulated braided type. 【Features】 ■ The pressure-resistant layer uses stainless steel wire or high-strength fibers ■ Ensures stable pressure resistance and durability ■ Available in external spring type and insulated braided type ■ Maximum operating temperature: 200℃ ■ Steam pressure: 1.0MPa *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose

The "SUPER Flexible Fluorine Spring" is a product with a spring structure that is resistant to crushing and excels in bending retention. The spring wire is made of stainless steel, which is resistant to rust. It can also be used for vacuum (suction) applications. The inner layer is made of a fluoropolymer (ETFE), providing excellent chemical resistance. It is resistant to most chemicals and solvents, including ketones. 【Features】 ■ Inner layer made of fluoropolymer (ETFE) ■ Excellent chemical resistance, resistant to most chemicals ■ Resistant to crushing and excels in bending retention with a spring structure ■ Spring wire made of rust-resistant stainless steel ■ Made from non-PVC materials *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose

This product is a flexible laminated fluorine hose. Compared to conventional fluorine hoses, it is easier to handle and has good workability. The inner layer is made of fluororesin (type 2 fluoride), which has excellent chemical resistance and is resistant to most chemicals. The inner layer of fluororesin (type 2 fluoride) is non-toxic and complies with the U.S. FDA and the Food Sanitation Act Ministry of Health Notification No. 20. 【Features】 ■ Flexible laminated fluorine hose ■ Easier to handle and better workability compared to conventional fluorine hoses ■ Excellent chemical resistance and resistant to most chemicals ■ Superior non-stick properties, high purity, abrasion resistance, gas barrier properties, etc. ■ Complies with U.S. FDA and Food Sanitation Act Ministry of Health Notification No. 20 *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials
• hose

The "SUPER Flexible Fluorine Hose" is a product with excellent transparency, allowing for clear visibility inside the hose. Due to its laminated structure, it offers superior flexibility compared to conventional single-layer fluorine hoses, improving workability. It also achieves lower costs compared to traditional fluorine tubes. Additionally, the interior is made of tetrafluoroethylene (ETFE), providing excellent chemical resistance and making it resistant to most chemicals. 【Features】 ■ Excellent flexibility and improved workability ■ Superior chemical resistance due to the interior made of tetrafluoroethylene (ETFE) ■ The inner surface has the non-stick properties characteristic of fluorine resin ■ Complies with the Food Sanitation Act Ministry of Health, Labour and Welfare Notification No. 20 ■ Achieves lower costs compared to conventional fluorine tubes *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose

The "Paint Hose P Type" is a product characterized by its excellent solvent resistance. The main materials are nylon and polyurethane. The operating temperature ranges from -5 to 50°C, making it suitable for the pressure delivery of paints and thinner solvents. We also offer the "Paint Twin Hose PW Type," which combines the hit hose and paint hose for easier use. 【Features】 ■ Dedicated for pressure delivery of paints and thinner solvents ■ Excellent solvent resistance ■ Operating temperature: -5 to 50°C ■ Material: Nylon + Polyurethane ■ Color: Yellow transparent *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose

"KY Sanfoods Hose" is an ecological hose that suppresses the generation of harmful gases even when incinerated. It is a non-oil type that does not contain plasticizers, achieving flexibility and pressure resistance equivalent to PVC hoses. It can be used for fatty foods and is suitable for food and beverages. Additionally, the inner layer is made of olefin-based resin, providing excellent chemical resistance. 【Features】 ■ Suppresses the generation of harmful gases even when incinerated ■ Achieves flexibility and pressure resistance equivalent to PVC hoses ■ Non-oil type that does not contain plasticizers ■ Complies with the Food Sanitation Act, Ministry of Health, Labour and Welfare Notification No. 201 (n-hexane compliant) ■ Excellent chemical resistance due to the inner layer being made of olefin-based resin *For more details, please refer to the PDF materials or feel free to contact us.

• Piping Materials
• hose

"Sanfoods Hose" is a natural transparent hose that allows for fluid visibility. It excels in cold and heat resistance, with a wide temperature range for use. Additionally, it has excellent pressure resistance due to the reinforcing threads. Made from soft polyvinyl chloride resin, it achieves both ease of handling and compatibility with fatty food products. 【Features】 ■ Allows for fluid visibility ■ Excellent pressure resistance due to reinforcing threads ■ Achieves a balance between ease of handling and compatibility with fatty food products ■ Food-grade hose made from soft polyvinyl chloride resin ■ Excellent cold and heat resistance, with a wide temperature range for use *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• hose