ハギテック List of Products and Services

The "G-Special Graphfoil Braided Packing" is a unique product made by braiding pure expanded graphite ribbon into yarn. Thanks to technological advancements, it can be easily installed and used for long periods in pumps and valves. It possesses excellent flexibility, self-lubricating properties, is chemically inert, and has high thermal conductivity, promising the highest level of sealing life and stable performance. By using no reinforcing materials, it achieves excellent physical properties and mechanical strength without causing damage to the shaft material, unlike when using wires (reinforcing lines). 【Specifications (Reference Values)】 ■ Maximum Operating Temperature: -220℃ to +300℃ ■ Peripheral Speed: 30 m/sec ■ pH: 0 to 14 ■ Specific Gravity: 1.0 g/cm³ *For more details, please refer to the related links or feel free to contact us.

• Other consumables

The "Yellow Fiber® Braided Packing" is a packing made by impregnating high-strength aramid fiber (KEVLAR®) yarn with PTFE dispersion and heat-resistant lubricant, and then braiding it. The nominal dimensions of "244-4188-01" are 3mm in height and 3mm in width, with a length of 3m at 1/8 inch. Applicable fluids include acids, alkalis, organic solvents, clean seawater, hydrocarbons, oils, wastewater, industrial wastewater, white liquor for pulp, green liquor, and black liquor. 【Specifications (Reference Values)】 ■ Maximum operating temperature: -220℃ to +300℃ ■ Pressure: 10MPa (100kgf/cm²) ■ Peripheral speed: 20m/sec ■ pH: 2 to 13 ■ Specific gravity: 1.5g/cm³ *For more details, please refer to the related links or feel free to contact us.

• Other consumables

"Asbestos Zero Heat-Resistant Graphite Braided Packing" is a packing made by braiding yarns that have been impregnated with heat-resistant lubricants and graphite, using a blend of inorganic and organic fibers. Applicable fluids include clean water, weak acids, weak alkalis, various salt solutions, oils, wastewater, solvents (alcohol), municipal drainage, industrial wastewater, and general gases. The intended applications are for various pumps, valve shafts for agitation, expansion joints, steel mills, pulp and paper mills, cement factories, ships, etc. 【Specifications (Reference Values)】 ■ Maximum operating temperature: -50 to 280℃ ■ Pressure: 6.5 MPa ■ Peripheral speed: 0-15 m/s ■ pH: 5 to 11 ■ Specific gravity: 1.5 g/cm³ *For more details, please refer to the related links or feel free to contact us.

• Other consumables

"Super Fron Teflon Fiber Braided Packing" is a chemical packing made from 100% pure PTFE fiber. It has excellent chemical resistance and can be used with fluids ranging from strong acids to strong alkalis. Applicable fluids include strong acids, strong alkalis, organic solvents, gases, ammonia, hydrocarbons, chemicals, corrosive fluids, pharmaceuticals, and more. 【Specifications (Reference Values)】 ■ Maximum Operating Temperature: -100℃ to +300℃ ■ Pressure: 5.0 MPa (50 kgf/cm²) ■ Peripheral Speed: 5 m/sec ■ pH: 0 to 14 ■ Specific Gravity: 1.7 g/cm³ *For more details, please refer to the related links or feel free to contact us.

• Other consumables

The "Oval Super Seal" is a new marshmallow-like product made of 100% PTFE (polytetrafluoroethylene resin) that has undergone advanced special processing and research and development. Due to its low cold flow, it is effective for sealing. It can be used safely at a regular pressure of up to 40 kg/cm². It has high chemical stability and is not affected by molten alkali metals or halides under high temperature and pressure. 【Features】 - Suitable for food and pharmaceutical applications without contaminating fluids (complies with food sanitation standards). - Usable over a wide temperature range from -240°C to +260°C (reference value). - Easy to attach to complex seal surfaces or horizontal piping flanges due to the adhesive tape on one side. - Available in six standard sizes, with stock that can accommodate most applications with free-size packing. *For more details, please refer to the related links or feel free to contact us.

• Repair Agent

We offer a standard lineup of ultra-fine and ultra-thin SUS304 pipes. For the model "899-SUS304T-φ0.3×φ0.1", the outer diameter is φ0.3 and the inner diameter is φ0.1, with a standard length of L = 1000mm. Please note that stock sizes may change due to sales lots and delivery times, so please inquire each time. 【Product List (Excerpt)】 ■899-SUS304T-φ0.3×φ0.15 ■899-SUS304T-φ0.4×φ0.2 ■899-SUS304T-φ0.48×φ0.23 ■899-SUS304T-φ0.5×φ0.25 ■899-SUS304T-φ0.5×φ0.3 *For more details, please refer to the related links or feel free to contact us.

• Other metal materials

We would like to introduce our oil-resistant pressure hose 'E-STB' that we handle. Thanks to the formulation of oil-resistant plasticizers, the hose is less likely to harden even when oil or hot water flows through it, ensuring a long lifespan. It is lightweight and flexible. It has pressure resistance, and for inner diameters ranging from φ6.0 to φ25mm, it can be used at a pressure of 1.0MPa (at 20℃). 【Features】 ■ Easy Cutting: The hose has length markings printed at 1-meter intervals, making cutting simple. ■ Transparency: The green transparent color allows for easy visibility of the fluid. ■ Green Procurement: It does not contain, or contains below the threshold, any of the 10 substance groups specified in the revised RoHS directive (RoHS 2.0) as of July 22, 2019. ■ Dedicated Fittings: By combining with dedicated fittings, accidents due to misselection of hoses and fittings can be prevented. *For more details, please refer to the related links or feel free to contact us.

• hose

The "NPT Thread Hose Nipple" is a product used as a joint adapter to connect pipes and hoses. One side is equipped with an NPT thread, allowing it to connect with a matching threaded fitting. The other side has a bamboo shoot shape, making it difficult for the hose to come out once inserted. Final tightening is done with a hose clamp, completing the installation. 【Features】 ■ Used as a joint adapter to connect pipes and hoses ■ One side has an NPT thread for connection with a matching threaded fitting ■ The other side has a bamboo shoot shape, making it difficult for the hose to come out once inserted ■ Final tightening is done with a hose clamp, completing the installation *For more details, please refer to the related links or feel free to contact us.

• Pipe Fittings
• hose

We would like to introduce our separate type relay connector 'OA-QWH' that we handle. It can be used for waterproof and dustproof treatment of various relay connectors and link connectors. The operating temperature range is -20 to +70°C, and the sales unit is one piece. Please feel free to contact us when you need it. 【Model and Specifications (Partial)】 <Weather Resistance> ■ OA-QWH16-08SRSEN (General Use) ■ OA-QWH16-L1SRSEN (For Link Connector) <Oil Resistance> ■ OA-QWH16-08SRSN (General Use) ■ OA-QWH16-L1SRSN (For Link Connector) *For more details, please refer to the related links or feel free to contact us.

• Other Connectors
• Wiring materials

The "KKS Series" is a high-pressure cleaning antibacterial cover hose that incorporates silver ions into the cover for antibacterial properties. The operating temperature range is from 0°C to +50°C, with the tube made of polyester and the reinforcement layer consisting of high-strength polyester fibers. Additionally, the standard fittings are made of iron, but stainless steel can also be produced. Please feel free to contact us if you have any inquiries. 【Lineup】 ■KKS-4 ■KKS-6 ■KKS-8 *For more details, please refer to the related links or feel free to contact us.

• hose

The "fluororubber tube" we handle is a product that excels in heat resistance, oil resistance, and chemical resistance. It is made to order and can be produced in custom sizes. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■FKM-0.5x1 ■FKM-0.5x1.5 ■FKM-0.5x2.0 ■FKM-1x2 ■FKM-1.6x3.2 ■FKM-2x3 *For more details, please refer to the related links or feel free to contact us.

• tube

We would like to introduce our "Stainless Steel Hand-Tightening Band." It can be easily tightened by hand on-site. The material consists of a body equivalent to SUS430 and a resin knob made of ABS. The band width is 9mm for all sizes. Please feel free to contact us when you need assistance. 【Product Lineup】 ■W2L-16P ・Tightening Range (mm): 8–16 ■W2L-22P ・Tightening Range (mm): 12–22 ■W2L-27P ・Tightening Range (mm): 16–27 *For more details, please refer to the related links or feel free to contact us.

• Packaging materials
• Other packaging materials

This product is a cutter equipped with a measuring function that can cut cleanly at the cutting surface. The "ASE80" can cut up to a maximum length of 80mm, while the "ASE150FBK" can cut up to a maximum length of 150mm. It has a built-in opening spring, making it highly efficient for work. Additionally, it can be locked for safe use. 【Features】 ■ Cutter with measuring function ■ Can cut to specified lengths ■ Built-in opening spring for excellent workability ■ "ASE80" is suitable for cutting tubes and hoses, while "ASE150FBK" is ideal for cutting flat cables and sheets *For more details, please refer to the related links or feel free to contact us.

• cutter

We would like to introduce the "Bushing" that we handle. This product has waterproofing capabilities and can be used in food machinery, cooling equipment, and more. Its structure adheres to both the inner and outer surfaces of the partition, preventing water intrusion from the surroundings. Additionally, installation is as simple as pushing it in, which improves work efficiency. 【Features】 ■ Waterproofing effect: Structure adheres to the inner and outer surfaces of the partition, preventing water intrusion from the surroundings. ■ Dustproof effect: Adheres to the inner and outer surfaces of the partition, preventing dust from entering the interior. ■ Insulation effect: The interior is hollow. ■ Labor-saving effect: Installation is simply a matter of pushing it in. *For more details, please refer to the related links or feel free to contact us.

• Wiring materials
• Other cable related products

The "FU Connector" is a fitting specifically designed for the "Alamec FU Tube." It is a type of fitting that tightens with a nut from above after inserting the tube, allowing for a secure connection without the need for additional bands or similar items. There are two types of materials available: polypropylene (white) and polyacetal (black). Polyacetal is made to order, except for certain parts. 【Features】 ■ Tightens with a nut from above after inserting the tube ■ Allows for a secure connection without the need for additional bands or similar items ■ Available in two materials: polypropylene (white) and polyacetal (black) ■ Polyacetal is made to order, except for certain parts *For more details, please refer to the related links or feel free to contact us.

• Pipe Fittings

The "N-Joyner" that we handle is a product that achieves a compact shape and overwhelming cost reduction. The material is made of polypropylene (PP). Compared to typical resin connectors, it has a larger inner diameter, which reduces flow and pressure loss. It complies with RoHS regulations, REACH regulations, and food hygiene tests. Please feel free to contact us when you need assistance. 【Features】 ■ Achieves a compact shape and overwhelming cost reduction ■ Compared to typical resin connectors, it has a larger inner diameter, reducing flow and pressure loss ■ Made of polypropylene (PP) ■ Complies with RoHS regulations, REACH regulations, and food hygiene tests * For more details, please refer to the related links or feel free to contact us.

• Pipe Fittings

We would like to introduce our 'AM', a box-type fastening device that complies with JIS F8801. This product is made primarily of flame-retardant (V-0 equivalent) PBT and is an economical marine cable penetration fitting with a wide range of sizes available. It is offered in combinations of "fastening gland," "main body," and "fastening nut." Please feel free to contact us when you need assistance. 【Model Lineup (partial)】 ■AM-15 ■AM-20 ■AM-25 ■AM-30 ■AM-35 *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

We would like to introduce our marine cable gland 'FRP'. This product is offered as a combination of parts such as the "tightening gland" made of polycarbonate and "two washers" used above and below the gasket packing. Select the symbol (a, b, c, f) based on the model and the inner diameter of the packing. The symbol "f" refers to a free-type gasket packing that has a thin membrane in the center, through which a small hole can be made using a screwdriver or cutter before passing the cable through. 【Model Lineup】 ■FRP-15 ■FRP-20 ■FRP-25 *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

"BSSF" is a type S welding through fitting that complies with JIS F8802. It is offered as a combination of "clamping ground," "main body (iron pipe)," and "two washers." Additionally, a "gasket packing" is available for separate purchase. We also have a specialized packing that excels in waterproofing, so please inquire for more details. 【Parts List】 ■ Clamping Ground: Brass + Nickel Plating ■ Main Body (Iron Pipe): Iron + Zinc Plating ■ Two Washers: Iron + Nickel Plating ■ Gasket Packing (sold separately) *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

"CGD" is a marine cable penetration fitting compliant with JIS F 8803 (old standard)/NDS F 8818. It is offered in a combination of "clamping ground," "main body (iron pipe)," and "two washers," and is available in aluminum and stainless steel materials. Additionally, a "gasket packing" is available for separate purchase. 【Lineup (partial)】 ■CGD-10a ■CGD-10b ■CGD-15a ■CGD-15b ■CGD-15c *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

We would like to introduce our through-type hardware 'CGBLL' with two nuts and a wall-tightening design. It is offered with a combination of parts such as the "tightening ground" made of brass with nickel plating and the "packing" made of bonded canvas. Additionally, we have a separately sold "gasket packing" for use inside the main body, and there are also specialized packings that excel in waterproofing. Please feel free to contact us. 【Lineup (partial)】 ■CGBLL-10a ■CGBLL-10b ■CGBLL-15a ■CGBLL-15b ■CGBLL-15c *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

We would like to introduce our thick pipe bushing type ground 'BSTT'. It is offered in a combination of "tightening ground" without brass plating, "main body (iron pipe)" made of iron + zinc plating, and "washers x 2" made of iron + nickel plating. Additionally, we have "gasket packing" available for separate purchase. Since its waterproofing is weaker compared to the dedicated packing, there are methods to use multiple A-type packings, as well as methods to use it in conjunction with sealing and putty materials. 【Parts List】 ■ Tightening Ground: Without Brass Plating ■ Main Body (Iron Pipe): Iron + Zinc Plating ■ Washers x 2: Iron + Nickel Plating ■ Gasket Packing (Sold Separately) *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

"Gold Detection Tape" is a product coated with a material that reacts to metal detectors. It is suitable for preventing foreign object contamination in food factories and similar environments. It has strong adhesive properties, allowing for secure application. The fabric is made of cotton, making it versatile for various uses regardless of the purpose. [Features] - Usable for various applications regardless of purpose - Can be used for "temporary repairs" - Strong adhesive properties for secure application - Made of cotton fabric *For more details, please refer to the related links or feel free to contact us.

• Adhesive tape

The "WP Series" is a color duct made from materials that excel in heat resistance, water resistance, and strength, and are resistant to aging. Its flame retardancy is due to the self-extinguishing properties of UL94V-0 certified materials. Since the raw materials are colored, there is no concern about color fading. It can also be used for explosion-proof circuit control panels, and the packaging quantity is a small lot type with a maximum of 10 pieces. 【Features】 ■ Uses materials that excel in heat resistance, water resistance, strength, and are resistant to aging ■ Flame retardancy is due to the self-extinguishing properties of UL94V-0 certified materials ■ Complies with RoHS Directive and RoHS2 Directive ■ No concern about color fading as the raw materials are colored *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

The "ED Series" is an eco-duct that takes the environment into consideration. It uses non-halogen resin, which does not produce harmful gases during incineration. Its specific gravity is approximately 20% lighter compared to PVC. It has flame retardancy with UL94V-O certification for self-extinguishing properties. 【Features】 ■ Environmentally friendly ■ No harmful gases produced during incineration ■ Approximately 20% lighter than PVC ■ Superior heat resistance compared to conventional PVC *For more details, please refer to the related links or feel free to contact us.

• Piping Materials

"TL-SBW" is an inexpensive, high-quality wire-reinforced food-grade hose suitable for switching from hose bands. It uses high-quality platinum silicone, which is also adopted in medical applications. It has high pressure resistance and can accommodate large diameters (up to 4S), making it suitable for HACCP compliance and other uses. 【Features】 - Compatible with inner diameters from φ16mm (15A) to φ100mm (4S) - Complies with the Japanese Food Sanitation Law (Ministry of Health and Welfare Notification No. 370) - Ideal for switching from hose bands - Usable for HACCP compliance and other applications *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our ultra-high pressure hose, the 'S Series'. The reinforcement layer is made of wire unibraid (SUS304), and the continuous use temperature range is -54°C to +204°C. It meets the conditions of the US SAE standards 100R8 and 100R9, and all types are anti-static. 【Lineup (partial)】 ■S-04 ■S-06 ■S-08 ■S-12 *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our high-pressure hose "H Series." We can also manufacture an anti-static type (HCO Series) as a made-to-order product. The reinforcement layer consists of a 2-wire braid (SUS304), and the continuous use temperature range is -54℃ to +204℃. 【Lineup (partial)】 ■H-04 ■H-05 ■H-06 ■H-08 *For more details, please refer to the related links or feel free to contact us.

• hose

The "F Series" is a flexible Teflon hose with liquid pooling resistance. It combines the characteristics of straight tubes and convoluted tubes. It demonstrates outstanding performance in environments where both prevention of liquid pooling and flexibility are required, such as in food, pharmaceuticals, and paints. 【Features】 ■ Exhibits excellent performance in environments where both prevention of liquid pooling and flexibility are required ■ Complies with the Food Sanitation Act Ministry of Health, Labour and Welfare Notification No. 370 ■ Meets FDA, EU Food, and USP Class VI standards ■ An anti-static type (FCO series) is also available *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our low-pressure hose "L Series." The lineup includes "L-04," "L-10," and "L-32," among others. There is also an anti-static type (MCO series) available. Additionally, the reinforcement layer is made of wire braid (SUS304), and the continuous use temperature range is -54℃ to +204℃. 【Partial Lineup】 ■L-04 ■L-05 ■L-06 ■L-08 ■L-10 *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our pliable hose, the "E Series." The reinforcement layer is made of wire braid (SUS304) and complies with the Ministry of Health, Labour and Welfare Notification No. 370 regarding food sanitation. Additionally, we also offer an electrostatic prevention type (ECO Series), so please feel free to contact us if you need any assistance. 【Lineup (partial)】 ■E-04 ■E-06 ■E-08 ■E-12 ■E-16 *For more details, please refer to the related links or feel free to contact us.

• hose

The "T Series" has been flared processed with unique technology, so all parts in contact with the liquid are made of Teflon. Depending on the usage conditions, it is possible to attach a spring (TS type) or a blade (TW type). Additionally, it complies with the Ministry of Health, Labour and Welfare Notification No. 370 of the Food Sanitation Act. Please feel free to contact us when placing an order. 【Materials】 ■ Tube: PTFE ■ Spring: SUS304/SUS316 ■ Blade: SUS304/SUS316 ■ Flare Fitting: SUS304/SUS316 ■ Flange: SUS304/SUS316 *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our combo hose, the "R Series." The reinforcement layer is made of fiberglass and wire braid (SUS304), with a continuous use temperature range of -54°C to +204°C. Please feel free to contact us when you need assistance. 【Lineup (partial)】 ■R-06 ■R-08 ■R-12 ■R-16 *For more details, please refer to the related links or feel free to contact us.

• hose

We would like to introduce our medium-pressure hose, the "M Series." The reinforcement layer is made of wire braid (SUS304), and the continuous operating temperature range is -54℃ to +232℃. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ■M-03 ■M-04 ■M-04T ■M-05 ■M-05T *For more details, please refer to the related links or feel free to contact us.

• hose

"WELG" is a wiring protection tube that can be easily attached to aluminum frames. It can be used in equipment units, frames, clean booths, and other production sites. It neatly organizes the crowded wiring and cables around the aluminum frame, achieving both wiring protection and a pleasing appearance. 【Features】 ■ Can be attached to aluminum frames used in production sites ■ Easy-lock type tube shape ■ Can be easily fitted without special tools (can be attached and detached by hand) ■ Length and branching points can be easily cut with scissors *For more details, please refer to the related links or feel free to contact us.

• tube

We would like to introduce the 'MK5000/MK3000' handled by Hagi Tech. Canon's cable printer has evolved vividly. It further improves printing accuracy and has newly equipped functions to address on-site challenges. It significantly enhances the efficiency of wiring marking tasks in various settings such as electrical equipment, panel manufacturing, LAN wiring, plant construction, and maintenance of production equipment. 【Features】 ■ Up to 3 computers can be connected simultaneously (compatible model: MK5000) ■ Equipped with a bilingual display function (Japanese and English) ■ Auto-cut function for nameplates (compatible model: MK5000) ■ Compatible with various media ■ Can operate in locations without power supply ■ Can print without worrying about power supply even in low-temperature environments *For more details, please refer to the related links or feel free to contact us.

• Printer
• Commercial printers
• Other markings

The "Ultra-Fine TPX Tube" we handle is a tube extruded from TPX (Poly(methyl pentene) resin: PMP), which excels in transparency and heat resistance. TPX is a resin that boasts excellent transparency, heat resistance, and chemical resistance. Among thermoplastic resins, it is particularly lightweight and possesses olefin characteristics, making it highly resistant to chemicals (such as acids, alkalis, and alcohols). In addition to ultra-fine tubes, we also offer the possibility of custom shapes, so please feel free to contact us. 【Features】 ■ Extruded from TPX, which excels in transparency and heat resistance ■ Excellent chemical resistance (to acids, alkalis, alcohols, etc.) ■ High transparency, high heat resistance, excellent electrical insulation properties, low dielectric characteristics comparable to fluororesins, and high gas permeability, enabling the creation of high value-added products ■ Not only ultra-fine tubes but also custom shapes are possible *For more details, please refer to the related links or feel free to contact us.

• tube

The "Slide-Up Tube (for 3D Printer Filament Supply)" is a soft polyolefin extrusion tube that has a special lubricating resin molded on its inner surface. The smooth inner surface allows for easy wire threading. Even without antibacterial or antifungal treatment, it is resistant to mold, and has properties such as abrasion resistance, weather resistance, scratch resistance, dirt resistance, and low odor. Its chemical resistance shows strong resistance to acids, alkalis, and alcohols, and it does not use plasticizers or halogens, making it an environmentally friendly product. 【Features】 ■ Special lubricating resin molded on the inner surface ■ Smooth inner surface allows for easy wire threading ■ Resistant to mold even without antibacterial or antifungal treatment ■ Properties include abrasion resistance, weather resistance, scratch resistance, dirt resistance, and low odor ■ Chemical resistance shows strong resistance to acids, alkalis, and alcohols *For more details, please refer to the related links or feel free to contact us.

• tube

The "HS Suction Hose" we handle is a commonly used insertion-type rubber hose. Installation to piping is simply done by inserting it and tightening with a hose clamp. It is reinforced with wire, allowing it to be used not only for positive pressure but also for negative pressure lines. Additionally, the inner rubber material is available in options such as CR, NBR, NR, and abrasion-resistant types. Please feel free to contact us when you need assistance. 【Standard Specifications】 ■ Maximum Operating Temperature: -10 to 60℃ ■ Maximum Operating Pressure: -60 kPa to 0.25 MPa ■ Inner Rubber Material: EPDM *For more details, please refer to the related links or feel free to contact us.

• hose

The "Tube Assembler" is a product designed with the concept of "easy for anyone," achieving "reliable and uniform results." The time taken from setup to completion of the connection is just a few seconds. It does not require electricity or air, allowing for easy relocation without needing a specific installation site. With a small and compact design that can be set up in the space of an A4 sheet, it can accommodate tubes with an outer diameter of 3mm to 6mm by changing attachments. 【Features】 ■ The time taken from setup to completion of the connection is just a few seconds. ■ Achieves "reliable and uniform results" with the concept of "easy for anyone." ■ Accommodates tubes with an outer diameter of 3mm to 6mm by changing attachments. ■ Does not require electricity or air, allowing for easy relocation without needing a specific installation site. ■ Small and compact design that can be set up in the space of an A4 sheet. ■ Enables improvement of the work environment and enhancement of production efficiency. *For more details, please refer to the related links or feel free to contact us.

• tube

The "Hybrid Toyodrop Hose HTD" is a product that is stronger against bending and crushing compared to conventional blade hoses, making it suitable for piping in narrow spaces. It is resistant to bending and crushing, ensuring good shape retention, resulting in low pressure loss and energy savings. Additionally, there is no need for insulation covering work, which reduces piping work and shortens time. Insulation materials are available in two types: ivory and gray, preventing foreign matter contamination. 【Features】 ■ Strong against bending and crushing, suitable for piping in narrow spaces ■ Good shape retention, low pressure loss, and energy savings ■ No need for insulation covering work, reducing piping work and saving time ■ Resistant to condensation, preventing electric leakage accidents and injuries from wet floors ■ No cleaning required due to condensation ■ A dedicated joint cover is also available as a measure against condensation at joint sections *For more details, please refer to the related links or feel free to contact us.

• hose

"Aspile Tie" is a product that can bundle fiber optic cables and high-quality cables without damaging them. It is suitable for temporary bundling as it allows for easy bundling and removal. Additionally, it is resistant to vibrations and humidity, maintaining the bundled state. It comes in a standard reel type, with black as the standard color. For inquiries about the availability of colors other than black or production lots, please contact us separately. 【Specifications】 ■Material: Front - Nylon, Back - Polyethylene ■Operating temperature range: -10℃ to +70℃ *For more details, please refer to the related links or feel free to contact us.

• Other cable related products

This product is a tasteless and odorless low-density polyethylene tube (LDPE) used in beverage devices, freshwater systems, and more. It excels in tear strength, stress resistance, tensile strength, and pressure resistance, making it suitable for applications such as pneumatic control equipment and car washing. Additionally, with a wide variety of colors available, it is also suitable for identification purposes in air and fluid transport. 【Specifications】 ■Material: Soft polyethylene (LDPE) ■Hardness: Shore D40-50 ■Melting point: 112℃ ■Brittleness temperature: -68℃ *For more details, please refer to the related links or feel free to contact us.

• tube

At Hagi Tech Co., Ltd., we are capable of cutting rubber tubes, rubber profile extrusions, molded products, shrink tubes, and more with ultra-high precision using specialized processing machines. We can accommodate sizes up to φ400mm and lengths of approximately 500mm (please note that there may be cases where processing is not possible depending on the processing fixtures). Our processing achievements include various types of rubber (CR, NBR, EPDM, silicone rubber, polyurethane rubber) and shrink tubes. We may also be able to handle soft-type resins, so please inquire for more information.

• Processing Contract

This product is a hose with flanges attached at both ends. Due to its special structure, it is flexible and reinforced with wire, making it suitable for use not only in positive pressure lines but also in vacuum lines. It is suitable for applications such as piping for muddy water at construction sites, temporary piping within factories, and piping with many complex bends. 【Features】 ■ High flexibility - The special structure provides flexibility. ■ High versatility - Reinforced with wire, it can be used in both positive pressure and vacuum lines. *For more details, please refer to the related links or feel free to contact us.

• hose