日本マグネティックス List of News Articles

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Heat-resistant Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Heat resistance temperature 200℃, exhibits high magnetic strength even in high-temperature environments! The rod magnet, referred to as a quasi-heat-resistant rod magnet (Nd series), typically has a maximum operating temperature of 120 to 150℃. When returned to room temperature, it recovers its original magnetic strength, but in that environment, the magnetic strength decreases more than expected. In contrast, the Sm series heat-resistant rod magnet has the advantage of less magnetic strength reduction. 【Features】 ■ Less magnetic strength reduction even in high-temperature environments. ■ Cost reduction compared to conventional products. 【Specifications】 ■ Heat resistance temperature 200℃ ■ Surface magnetic strength: φ24.2 specification 11,000 Gauss / φ25 specification 10,000 Gauss

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Suspended Rectangular Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ 【Patent Obtained!】 This magnet is designed to hang over films, foils, and papers to collect weak magnetic foreign objects. While rod magnets have a high surface magnetic flux density, the magnetic flux lines do not extend far, causing the magnetic flux density to drop sharply when a few millimeters away from the surface of a pipe. Therefore, using them in a suspended or hanging manner was not very effective. We have developed a suspended rectangular rod magnet that maintains a high magnetic flux density even when hung above the transported items at a certain distance, specifically for the removal of fine iron powder. (Patent No. 5865321) 【Features】 ■ It does not damage the products as it removes foreign objects while maintaining a certain distance. ■ Although rod magnets have varying magnetic strengths along their length, the SSB type maintains a surface magnetic strength of 10,000 Gauss (1.0 Tesla) along its length, allowing it to collect magnetic foreign objects regardless of the point of passage.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Pipe Surface 15,000 Gauss Rod Magnet ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ The "Pipe Surface 15,000 Gauss Rod Magnet" can be easily installed in narrow areas such as raw material drop points and discharge points on the manufacturing line. 【Features】 ■ Can be used in liquid environments due to its stainless steel pipe construction. ■ Produces rod magnets with a surface magnetic force of up to 15,000 Gauss. ■ Customizable to desired dimensions in 1mm increments. ■ Inspection certificates with magnetic force specifications can be provided for HACCP, ISO, and other compliance measures. ■ Surface processing options such as ion nitriding, tungsten spraying, and Teflon coating are available. ■ Options for eye bolts and handles are also possible. 【Specifications】 ■ Super high magnetic type (15,000, 14,000), high magnetic type (12,000), standard type (10,000), heat-resistant type (10,000), and ferrite type (φ25, φ32) available. ■ Pipe materials: SUS304, SUS316L, titanium. ■ Tapping and male thread processing are also available. Standard tap specifications: M6, M8 (depth 12mm).

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Mag Hammer ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ It eliminates adhesion, clogging, rat holes, arching, and bridging that occur in hopper shoots, ducts, tanks, etc.! The 'Electromagnetic Mag Hammer,' a hammering device for removing adhered powder and preventing clogging, utilizes the energy of an electromagnet to move the piston rod at high speed, delivering powerful impacts to eliminate adhesion of powders in equipment like hoppers and to break bridges. No air is required, and it can be used with alternating current (3-phase 200V), with minimal loss of impact force even at distances of up to 100m between the Mag Hammer and the dedicated control panel. 【Features】 ■ Automatic operation is possible with settings for continuous strikes and pause times. ■ Concentrated strikes (up to 10 times) are possible, providing significant effects for removing adhesion. ■ Automatic operation is possible via external linkage signals. ■ It can be used in high-temperature equipment (up to 300°C, with ambient conditions up to 40°C) (special: high-temperature specification). ■ It can be manufactured entirely from SUS (special: corrosion-resistant specification).

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-mini Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Suitable for the removal of weak magnetic materials and trace iron powder! Achieves a core magnetic flux density of over 16,000 gauss! Removes iron powder and fine iron powder mixed in liquids using a magnetized filter. Can also be used for relatively high-temperature substances and slurries. With dozens of magnetic filters that have a high iron removal effect, it can remove fine iron powder of a few microns. Additionally, the magnetic filter can be adjusted to change the mesh size according to the material being processed! 【Features】 1. Achieves a core magnetic flux density of over 16,000 gauss! 2. Removes and recovers all magnetic materials in liquids and slurries with high magnetic force! 3. Can alleviate labor shortages when used in conjunction with an automatic cleaning device. 4. Improves cooling efficiency and reduces magnetic force decline during heating.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-mini Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ A size that can be installed in locations where it was previously impossible! Overwhelming foreign matter recovery power that cannot be compared to permanent magnet types! 【Features】 1. Volume ratio 75% / Installation area ratio 65% / Magnetization power 50% / Weight 75% 2. Now available in a size that can be installed in locations where it was previously impossible. 3. Overwhelming foreign matter recovery power that cannot be compared to permanent magnet types! 【Specifications】 1. Air core magnetic force 3,300 GAUSS 2. Various screens can be adopted *For details, please download the PDF or contact us.

■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ Product News! Electromagnetic Separator CG-X Type ■〓■〓■〓■〓■〓■〓■〓■〓■〓■〓■ The CG-X type electromagnetic separator is the most efficient model for removing fine iron powder from powders, widely adopted not only in the food industry but also in chemicals, plastics, ceramics, and pharmaceuticals. 【Features】 1. Generates a separation magnetic field (when screen is set) of over 18,000 Gauss. 2. Can use honeycomb-shaped screens (patented). 3. Exhibits a core magnetic flux density of over 15,000 Gauss (when cold). 4. In the case of a chiller unit (optional), it is possible to suppress the current drop rate during heating and maintain a stable high magnetic force.