マイクロストーン Product Lineup

The "MVP-AiFiS-S" is a system that can determine the "abnormality level" of the measurement section using automatic AI from the data measured on the vibration levels of equipment lines. ★ It can be easily introduced at a low cost, even on a small scale. ★ We are currently offering free rental of demo units (for one week). If you are interested, please feel free to contact us! We can also lend you a measurement PC. 【Do you have any of the following concerns?】 ■ The robot's operational movements are not constant, and outputs fluctuate, making it impossible to manage the state with fixed-time measurements. ■ The short-term state changes are small, so there is no need for constant measurements! ■ Monitoring signs for each process within a single cycle is necessary, and data extraction and comparison between the same processes are required, making analysis difficult! 【Points that make this product a choice】 ■ Automatic extraction and data analysis for each process can be performed within a pre-set single cycle! ■ Abnormality level determination by AI allows for automatic management of abnormal signs in the equipment! ■ When the pre-set "abnormality level" is exceeded, abnormal information can be automatically forwarded to the registered email! This prevents overlooking abnormal conditions!

• Vibration Monitoring
• Analytical Equipment and Devices
• Sensors

The "MVP-RF8-JC" is a wireless vibration meter that uses Bluetooth communication. It requires no wiring and is easy to install and remove. ★ It can be easily introduced at a low cost for small-scale applications. ★ We are currently offering free rental of demo units (for one week). If you are interested, please feel free to contact us! We can also lend you a PC for measurements. 【Key Features of This Product】 ■ Wireless communication method: Bluetooth; communication range: approximately 30m ■ In trigger measurement mode, measurements can be automatically started at any desired timing! Ideal for measuring predetermined takt times, such as in robotics! ■ Achieves a sampling period of 0.05 msec (sampling frequency of 20 kHz)! (In logging mode) ■ Up to two of our 3-axis accelerometer MA3 series can be connected as external sensors ■ Resolution: 12 bit ■ Continuous operating time: approximately 24 hours *For more details, please download the catalog with case studies or contact us.

• Vibration Inspection
• Data Logger
• Sensors

To all members of the Occupational Safety and Health Department of companies! As part of our efforts to reduce the risk of "slip and fall" accidents, which account for 25% of all workplace accidents, we are adopting "THE WALKING" as one of our tools. 1. From sensor attachment to displaying measurement results takes about one minute. Operating the computer requires just three button presses! It’s very simple. 2. In addition to "fall risk," it can also display "walking characteristics assessment" and "individual measures for walking improvement." Even without experts, you can work on individual improvements by simply handing over the report sheet. 3. Statistical lists of measurement results can be easily created by age group, gender, and fall risk, making it easy to summarize after health checks. With these features, it is suitable for adoption as one item in health checks within companies, especially where a large number of people need to be addressed in a short time, and can be used as part of efforts to reduce workplace accidents.

• Other measurement, recording and measuring instruments

The high-speed 3-channel compact wireless vibration recorder 'MVP-RF3-HC' is a wireless 3-axis (3ch) vibration recorder capable of real-time data display with high-speed sampling at 4kHz. By combining it with the piezoelectric 3-axis accelerometer 'MA3 series', it enables high-frequency vibration measurement of up to 10kHz. The automatic vibration data analysis software 'MVP-VCS-S' automatically calculates the effective values (RMS values) of vibration acceleration and velocity, creates trend graphs, and allows for automatic trend management. Additionally, by setting thresholds, it can also determine abnormalities, making it ideal for the 'preventive maintenance' of motors. 【Features】 1. High-speed sampling of 10kHz for 1ch and 4kHz for 3ch is possible. 2. In combination with the piezoelectric 3-axis accelerometer, it allows measurement over a wide range: - Vibration frequency up to 10kHz - Vibration acceleration up to 1000G 3. Data can be displayed in real-time. 4. Data can be saved as a CSV file. 5. Bluetooth is used for wireless communication, allowing for communication up to approximately 30m. 6. Vibration displacement analysis software enables data filtering and calculation of vibration velocity and displacement.

• Vibration Testing

The high-speed 3-channel compact wireless vibration recorder 'MVP-RF3-HC' is a wireless 3-axis (3ch) vibration recorder capable of real-time data display with high-speed sampling at 4kHz. By combining it with the piezoelectric 3-axis accelerometer 'MA3 series', it enables high-frequency vibration measurement of up to 10kHz. The vibration data automatic analysis software 'MVP-VCS-S' automatically calculates the effective values (RMS values) of vibration acceleration and velocity, creates trend graphs, and allows for automatic trend management. Additionally, by setting thresholds, it can also determine abnormalities, making it ideal for the 'predictive maintenance' of motors. 【Features】 1. High-speed sampling of 10kHz for 1ch and 4kHz for 3ch is possible. 2. In combination with the piezoelectric 3-axis accelerometer, it allows measurement over a wide range: - Vibration frequency up to 10kHz - Vibration acceleration up to 1000G 3. Data can be displayed in real-time. 4. Data can be saved as a CSV file. 5. Bluetooth is used for wireless communication, allowing communication up to approximately 30m. 6. The vibration data automatic analysis software enables automatic generation of trend graphs.

• Vibration Testing

To all members of the Occupational Safety and Health Department of companies! As part of our efforts to reduce the risk of "slip and fall" accidents, which account for 25% of all workplace accidents, we have adopted "THE WALKING" as one of our tools. 1. From sensor attachment to displaying measurement results takes about one minute. It's very easy. 2. Since the motion sensor is worn by the subject, it can be used in any location. The equipment is portable and can be implemented in various places. 3. The slip risk is quantified and displayed clearly. Additionally, the types of slip risks are automatically shown. Even without experts, slip risks can be easily assessed! 4. The slip risk score results can be graphed and displayed up to five times. It's clear at a glance how walking has changed before and after advice.

• Other measurement, recording and measuring instruments

【For such customers!】 1. I want to start preventive maintenance for equipment, but since I don't know the effectiveness, I want to start small with measurements at just one location! 2. I regularly measure equipment vibrations, but it takes time to prepare wiring and measuring instruments! 3. It takes time to compile data, and even though I measure vibrations, it doesn't lead to preventive maintenance! 【Benefits】 1. Wireless measurement is possible up to about 30 meters using Bluetooth! It can measure large vibrations from robots and conveyor systems without missing anything! 2. Since it is wireless, the tedious wiring and installation work is minimized. Additionally, because it is dedicated software for vibration measurement, setup is easy and does not require much labor! 3. By using vibration condition monitoring software (optional), automatic trend graph creation is possible, minimizing the labor required for data compilation!

• Sensors

● Uses ultra-bright LEDs for a bright and beautiful appearance! ● The fan section features hologram film, making it stand out even during the day! ● Battery replacement is possible. ● Custom design films can also be produced! Perfect for concerts and various events! ● Made in Japan, ensuring reliable quality! ● Patented in Japan.

• LED lighting

To all members of the Occupational Safety and Health Department of the company! As one tool to reduce the risk of falls in the workplace, it is being adopted as part of our efforts to prevent work-related accidents. 1. From sensor attachment to displaying measurement results takes about one minute. It’s very easy. 2. Since the motion sensor is worn by the subject, it can be used in any location. The equipment is portable and can be implemented in various places. 3. The fall risk is quantified and displayed clearly. Additionally, the types of falls that pose a risk are automatically displayed. Even without experts, fall risk can be easily assessed! 4. The fall risk score results can be graphed and displayed up to five times. It’s clear at a glance how walking has changed before and after advice.

• Other measurement, recording and measuring instruments

The MVP-RF6L-AC is a wireless vibration measurement device that allows for easy measurement of vibration levels in factory equipment. ★ It can be introduced easily and affordably, even on a small scale. Utilizing WiSUN communication technology, it has a communication range of approximately 100 meters! This makes it possible to measure equipment from the office in the factory. Since it is wireless and does not require wiring, installation does not require any construction, making it easy for anyone to set up, and relocating it is simple. ★ We are currently offering free rental of demo units (for one week). If you are interested, please feel free to contact us! 【Reasons to choose this product】 ■ Wireless communication range of 100 meters. You can measure equipment vibrations in the factory from the office without bringing a PC into the factory. ■ In logging mode, the sampling frequency can go up to 20 kHz. This single device can handle a wide range of equipment vibration measurements. ■ It allows for the connection of up to 4 external analog sensors. It also supports wireless measurements beyond just vibration measurement.

• Vibration Inspection

The "SD Motion Recorder" is a long-duration vibration recording device capable of measuring for approximately 50 hours with a 1 msec sampling rate. It can record long-term data on a microSD card, making it suitable for measuring ride comfort and transportation conditions. 【Features】 ■ Compact and portable ■ Capable of long-duration acceleration and angle waveform recording ■ Easy operation with a single button ■ Compatible with various measurements using external sensors ■ Data recording on microSD card! Easy data transfer to a computer! *For more details, please download the materials or contact us.

• Other measurement, recording and measuring instruments

Acceleration sensors (shock sensors) with a wide lineup covering a detection range from ±2 to ±1000 G and a frequency range from 0.8 Hz to 10 kHz. They can be used as external sensors for our motion recorder series! (Lead type) Implementation types are also available for sale from just one unit! Ideal for connecting to PLCs and for small-scale embedded production!

• Other measurement, recording and measuring instruments