マイクロテック Product Lineup

Stress Experiment Analysis Product Comprehensive Catalog ■□■Contents■□■ ■General-purpose Strain Gauges ■Uniaxial General-purpose Strain Gauges ■Biaxial General-purpose Strain Gauges ■Triaxial General-purpose Strain Gauges ■Shear Strain/Torque Gauges ■Special Products ・Temperature Sensors ・Crack Gauges ・Crack Propagation Gauges ■You can view the list of contents from the download button. If you would like a catalog, please contact us through the information request.

• Converters and Transducers

Solvent-based butyl rubber coating agent ■□■Features■□■ ■Excellent moisture resistance, with a low reinforcing effect from the coating film ■Used in strain gauge type converters ■In paste form, applied using a spatula or similar tool *Please ensure the application thickness is 2.5mm or more. ■Curing conditions: Dry at room temperature for 8 hours, then heat at 65 to 80 degrees for 4 to 6 hours ■Operating temperature range: -20 degrees to +80 degrees ■Shelf life: 12 months at +24 degrees ■For other functions and details, please download the catalog or contact us.

• glue
• Coating Agent

Adhesive used for high-precision converters Two-component mixed epoxy phenolic adhesive ■□■Features■□■ ■Low viscosity allows the adhesive layer thickness to be less than 0.005mm ■Forms a thin, uniform, and hard adhesive layer, minimizing the impact on the converter's creep, hysteresis, and directivity ■The lifespan of the adhesive is shortened under oxidation and high temperatures ■Operating temperature: -269 degrees to +230 degrees ■Shelf life: 9 months (+24 degrees), 12 weeks (+5 degrees) ■Pressure: 3-4 Kg/cm² (3.4 kg/cm² is optimal) ■For other functions and details, please download the catalog or contact us.

• Converters and Transducers
• glue

Exhibits optimal gauge performance for low-cost, mass production! A gauge specially designed for strain gauge type converters. ■□■Features■□■ ■Optimal gauge base thickness The thickness of the gauge base is particularly important to minimize the creep amount of the gauge. ■Uniform dimensions of the gauge base Allows for easy adhesion of the gauge in the correct position, reducing labor time. ■Special gauge pattern continuously improves the gauge through repeated enhancements Reduces fluctuations in creep amount due to changes in operating temperature. ■For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments
• Converters and Transducers

UK RDP Corporation Differential Transformer Displacement Gauges ■□■ Product Lineup ■□■ ■ High-precision Reference Displacement Gauge GT Series ■ Miniature Displacement Gauges D5 & D6 Series ■ Long Stroke Displacement Gauges ACT Series ■ Amplifier Built-in High Output Displacement Gauges DCTH Series (4-20mA option) ■ Amplifier Built-in Single Displacement Gauges LDC Series ■ Compact Waterproof Displacement Gauges D5W Series ■ Long Stroke Waterproof Displacement Gauges ACW Series ■ Amplifier Built-in Waterproof Displacement Gauges DCW Series (4-20mA option) ■ Seawater Pressure Resistant Displacement Gauges SSA Series ■ High Temperature Environment Displacement Gauges LIN Series ■ Non-contact Gap Sensors PY Series ■ Wire Pull Displacement Gauges DWT Series ■ UK RDP Electronics has been providing high-precision and high-quality LVDT displacement gauges, dedicated conditioners, and indicators backed by 40 years of experience and ISO 9001:2000 quality management system. ■ For other functions and details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

A set that combines the adhesive and various consumables necessary for strain gauge bonding into one kit. □ Kit Contents □ ■ Adhesive M-BOND 610 Kit ■ CSM-1A Degreaser 1 can ■ MCA-1 Conditioner A 1 bottle ■ SCP-1 Sandpaper #220 1 roll (25mm × 30m) ■ SCP-2 Sandpaper #320 1 roll (25mm × 30m) ■ SCP-3 Sandpaper #400 1 roll (25mm × 30m) ■ CSP-1 Cotton Swabs 1 pack (100 pieces, 150mm long) ■ GSP-1 Gauze Sponge 1 pack (200 pieces, 75mm × 75mm) ■ MJG-2 Mylar Tape 1 roll (13mm × 66mm) ■ PDT-1 Paper Tape 1 roll (19mm × 10m) ■ 361A-20R-25 Solder 1 roll (7.6m) ■ FAR-1 Solder Flux Kit ■ CPF-AST Terminal for Gauge 1 box, etc. ■ For other kit contents and details, please download the catalog or contact us.

• Converters and Transducers
• glue

RTV silicone rubber diluted with solvent (naphtha) ■□■Features■□■ After application, it forms a durable and elastic transparent film, exhibiting excellent mechanical and electrical properties as well as outstanding corrosion resistance. ■ The thickness of the coating film with a single application is approximately 0.4mm to 0.5mm. ■ Excellent drip resistance and chemical resistance. ■ Temperature range for use: - Short-term: -60°C to +290°C - Long-term: -60°C to +260°C ■ Shelf life: 9 months at 24°C after sealing. ■ For other functions and details, please download the catalog or contact us.

• paint

One-component epoxy adhesive for transducers ■□■Features■□■ Can be used as an adhesive for strain gauges or as a protective coating for gauges. Similar to M-BOND610, it forms a very thin, uniform, and strong adhesive layer. Excellent resistance to moisture and chemicals. ■Operating temperature: -269 degrees to +120 degrees ■Shelf life: 9 months (+24 degrees), 12 weeks (+5 degrees) ■Pressure: 3-4 Kg/cm² (3.4 Kg/cm² is optimal) ■For other functions and details, please download the catalog or contact us.

• Converters and Transducers
• glue