中村科学工業 Product Lineup

The "WWA" is a millimeter-wave moisture measurement system that can measure the moisture content in passing materials. This device utilizes the characteristics of millimeter waves, which "penetrate materials" and "are absorbed by moisture," to instantaneously measure the moisture contained within the passing materials. This has significantly reduced measurement time. Additionally, by adding measurements from the millimeter-wave moisture measurement system to the process, it allows for the pre-measurement of moisture content in materials, preventing the occurrence of defective products. This device can measure even when multiple types of materials are used. 【Features】 ■ Real-time measurement ■ Standard measurement: 100 seconds x 5 ■ Easy operation that does not require specialized knowledge ■ Clear display of material moisture content ■ Capable of measuring a variety of materials *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

"TRYMAX" is a series of mold temperature control machines that widely accommodates the clamping force and operating temperature range of injection molding machines. Starting with the high-precision hot water machine "WLB series," which is compactly designed to achieve a balance between high-temperature specifications of 120°C and maintainability, we also offer the "OTB/OMB series" of hot oil machines that excel in temperature control in high-temperature ranges, along with a rich lineup of cooling machines and temperature control machines to support our customers' molding processes. 【Features】 ■ Maintenance has become even easier with a floatless switch (WTE, WLB) ■ Maintenance-free with the adoption of a non-seal pump (WMC, OMB, OTB) ■ Improved operability and visibility with the newly developed temperature control panel *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and Humidity Control

The "NLG/NLE Series" is a dehumidifying dryer with a side-opening structure called "Aladdin Swing," making cleaning during material changes easy. By thoroughly reviewing the layout, we have achieved approximately 50% space savings compared to conventional models. The temperature display section has increased fivefold compared to our existing machines, making it easier to understand the operating status from a distance. In addition to an efficient dehumidification mechanism, the hopper dryer body adopts an air-insulated double structure called "Dual Package." This has resulted in improved energy efficiency and safety. 【Features】 ■ Side-opening structure ■ Space-saving ■ Easy-to-use panel ■ Increased safety and workability due to lower height ■ Improved material extraction port for easy cleaning *For more details, please refer to the PDF materials or feel free to contact us.

• Drying Equipment

We support our customers' molding needs with a wide range of injection molding machines that accommodate various clamping forces and temperature ranges. We offer the OTA series with a control temperature of up to 180°C and the OMA series with a control temperature of up to 190°C. For more details, please contact us or refer to our catalog.

• Temperature and Humidity Control

We support our customers' molding needs with a wide range of injection molding machines that accommodate various clamping forces and temperature ranges. For control temperatures: the WTD series up to 90°C and the WMB series up to 130°C. For more details, please contact us or refer to the catalog.

• Temperature and Humidity Control

The comprehensive catalog of Nakamura Scientific Industries Co., Ltd. features "excellent plastic molding products" that pave the way for the future of molding technology. It achieves a 40% reduction in energy consumption and low running costs compared to conventional methods. The company also realizes approximately 50% space-saving compared to its previous models. Additionally, the "N2 Cycle Dehumidifying Dryer Aladdin Swing," with its side-opening structure, makes cleaning during material changes easy. Our unique semi-closed "Hopper Dryer Aladdin Swing" achieves a 50% reduction in energy consumption through heat recovery. The catalog also includes many other products, such as the new concept "Vacuum Dryer Makara." For more details, please contact us or refer to the catalog.

• Drying Equipment
• Temperature and Humidity Control
• Mixer/agitator

The Mazer is a device installed on the material supply line of a loader that supplies two types of materials to one location by switching the flow path of the materials in a time-proportional manner. By changing the timer setting, you can adjust the ratio of the materials. It is ideal for situations such as "wanting to minimize the installation area," "wanting to build a recycling system at low cost," and "not requiring high precision in the mixing ratio." For more details, please contact us or refer to the catalog.

• Mixer/agitator

We provide a stable supply of coloring materials to the molding machine hopper. The materials are directly fed into the screw feeder while being measured in the molding machine hopper. For more details, please contact us or refer to the catalog.

• Other processing machines

This is a material transport machine that supplies plastic pellets to the destination hopper via a vacuum system using a suction blower. The high dust collection capability of the dust filter maintains consistent performance. Cleaning the dust filter box is easy with the "Poi Box." For more details, please contact us or refer to the catalog.

• Vacuum Equipment
• Other physicochemical equipment

The operating temperature range is for water-cooled and air-cooled cooling units between 5 and 30°C. For water-cooled units, we offer the compact CWD series, and for air-cooled units, we provide the AC-C series, which allows for greater flexibility in installation. For more details, please contact us or refer to the catalog.

• Temperature and Humidity Control

We support our customers' molding needs with a wide range of injection molding machines that accommodate various clamping forces and temperature ranges. We offer the OTA series with a control temperature of up to 180°C and the OMA series with a control temperature of up to 190°C. For more details, please contact us or refer to our catalog.

• Temperature and Humidity Control

We support our customers' molding needs with a wide range of products that accommodate various clamping forces and temperature ranges for injection molding machines. We offer the WTC series for control temperatures up to 90°C and the WMB series for up to 130°C. For more details, please contact us or refer to our catalog.

• Temperature and Humidity Control

This is a vacuum dryer designed for precision plastic molding. It enables drying at low temperatures by creating a near-vacuum state. It is effective in preventing oxidation of plastic pellets and yellowing of products. For materials that generate a lot of gas, it allows for a reduction in the frequency and duration of mold maintenance due to its gas removal effect. For more details, please contact us or refer to the catalog.

• Drying Equipment

For the essential pre-drying required for plastic injection molding, we assist in improving the quality of your molded products with: ■ Nitrogen-based dehumidifying dryers (NLD series) that achieve high-precision dehumidification with energy savings ■ Hot air circulation hopper dryers (DLD series) that demonstrate high energy-saving effects Both types are integrated with material transporters (loaders), contributing to space-saving in factories. For more details, please contact us or refer to the catalog.

• Drying Equipment

Cleaning during material changeover is easy! Hopper dryer and dehumidifying dryer with a side-opening structure ■□■ Features ■□■ ■ Improved operability with the control panel ■ Standard equipped with a material-free air feed unit that prevents moisture absorption during transport ■ Adopts a double structure 'Dual Package' to enhance insulation ■ Utilizes a hollow fiber membrane for nitrogen decomposition in the dehumidifying mechanism, achieving up to approximately 40% energy savings compared to conventional models ■ Achieves approximately 50% space saving compared to conventional models through thorough layout verification ■□■ Product Lineup ■□■ ■ Dehumidifying dryer (integrated with loader) NLD Series ■ Hopper dryer (integrated with loader) DLD Series ■ For more details, please download the catalog or contact us.

• Drying Equipment

Maintenance has become even easier with the floatless switch. Mold temperature control device ■□■Features■□■ ■Media - Thermal media oil: OMA type, OTA type - Clean water: WMB type, WTD type ■Temperature Range - WMB type: Supply water temperature +10℃ to 130℃ - WTC type: Supply water temperature +10℃ to 90℃ - OTA type: 60℃ to 180℃ - OMA type: 60℃ to 190℃ ■Improved operability and visibility with the temperature controller panel ■Maintenance-free due to the adoption of a non-seal pump (WMB, OMA, OTA are standard; WTD is optional) ■For other functions and details, please download the catalog or contact us.

• Temperature and Humidity Control