エクセリ List of Products and Services

The SBR-150S-7-09EL (SBR150S709EL) is a 150MHz band element manufactured by Nippon Antenna. It is a capacitive grounded λ/4 whip antenna for 150MHz band radios and features a shortened element. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. This is a designated frequency for the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. The feed point connector is an M6 female thread. Please use it in combination with the separately sold bases SBR-BA3-09 and SBR-BA5-09. * A hex wrench is required for base installation. * For more details, please feel free to contact us.

• antenna

The WX-SR152 (WXSR152) is an antenna station manufactured by Panasonic. It is an antenna-integrated receiver designed for small spaces. It is an antenna-integrated receiver for wireless microphones or portable wireless transmitters in the 1.9GHz digital wireless microphone system. Compatible devices include: boundary-type wireless microphone WX-ST700, handheld wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600 with gooseneck microphone WM-KG645, splash-proof wireless microphone WX-ST210, dynamic wireless microphone WX-ST250, lapel-type wireless microphone WX-ST400, and wireless transmitter WX-ST510, among others. The 1.9GHz band enables high sound quality and stable communication resistant to radio interference and crosstalk. With the adoption of a compressed audio codec, it offers a wide audio frequency range of 100Hz to 15kHz and a newly developed noise suppression function for clear sound quality. The power is supplied from the base station WX-SP104R1.

• others

The GB-060L-2-09EL (GB-060L209EL) is a 60MHz band vehicle-mounted element (MP type) manufactured by Nippon Antenna. It is a capacity-grounded λ/4 shortened whip antenna for disaster prevention administrative radio equipment operating in the 60MHz band. A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It is a designated frequency in the 60MHz band. Please specify the fo (center frequency) in MHz when placing your order. It is designed for gutter mounting and should be used in combination with the separately sold roof side bases RSB-BA3-MJ or RSB-BA5-MJ. It is the same product as the antenna element GB-060L-2A-09. The antenna length is approximately 90 cm. The feeding connector is MP. It complies with the European environmental regulation RoHS directive. For more details, please feel free to contact us.

• antenna

The WM-3000A (WM3000A) is a speech wireless microphone manufactured by UNI-PEX Co., Ltd. It operates in the 300MHz band and supports 13 channels. It features a unidirectional electret condenser design, making it less likely to pick up surrounding noise. With a clear and defined sound quality, it is ideal for speech applications. It has obtained technical standards compliance certification. Using a crystal-controlled PLL synthesizer method, it allows the selection of any one of 13 frequencies for use. It also includes noise reduction and tone squelch features. The antenna is of the built-in type. It operates for approximately 32 hours on a single AA alkaline battery. *For more details, please feel free to contact us.*

• others

● TRS3G (TRS-3G) is a camera tripod mounting base manufactured by Daiwa Denpa Kogyo (Diamond Antenna) (limited edition gold model). ● It is used with camera tripods during mobile operation of radio equipment. ● It is a bracket for attaching mobile antennas that require grounding to camera tripods. * The grounding effect increases the longer the ground wire is in contact with the ground. If the ground wire is elevated from the ground or deployed on a balcony, the radial effect decreases, and the SWR may not improve. In this case, increasing the number of ground wires or lengthening the ground wire can help. When installing on a balcony, connecting the ground wire to the railing may improve the situation. ● TRS3G is the gold version of TRS3. The antenna base has a gold texture. ● It is compatible with 1/4 inch camera screws. ● It uses a gold plating that is resistant to peeling. ● Comes with MJ-MJ connectors and a 20 cm 3D-2V coaxial cable. ● Complies with the European environmental regulation RoHS directive. ● It is a limited production product. * For more details, please feel free to contact us.

• others

The EMS-62 is a compact speaker microphone made by Alinco. It can be used with all specific low-power transceivers and commercial radios that adopt Alinco's screw-type waterproof plug. It is easy to grip, features a large PTT button (transmit button) and anti-slip design, making it easy to operate even while wearing gloves. The microphone plug part is completely waterproof with an IPX7 rating, and the microphone itself is splash-proof for everyday use. With a coiled cable that is resistant to tangling and breakage, it can be safely used in harsh environments such as construction sites and manufacturing plants. 【Compatible Models】 Digital Simple Radio Licensed Station - DJ-BU70D Digital Simple Radio Registered Station - DJ-DPX1 - DJ-DPS70 Specific Low-Power Transceivers - DJ-CH3 - DJ-P221 - DJ-P222 - DJ-P240 - DJ-P300 - DJ-R200D - DJ-P400 For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• Other network tools

The "MPT-200" is an IP radio manufactured by Mobile Create. No license application or personal qualifications are required; you can use it with just a simple registration. By utilizing the Docomo FOMA network, you can make calls anywhere in Japan. A communication network that is easy to use even in mountainous areas or between buildings has been adopted. Despite its robust body, it features a lightweight and compact design, allowing for safe long-term operation even in demanding environments. With an IP67 dust and water resistance rating, it can be used confidently in heavy rain, sand, and dust. By adding a GPS function as an option, you can track the current location of the product owner from a PC or smartphone. It can be combined with the MPT-100 in-vehicle unit to build a large-scale communication system. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ No license application or registration required ■ Available for calls throughout Japan ■ IP67 dust and water resistance ■ Lightweight and compact body *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

● The IP210H1 rental device is a wireless mobile IP phone that allows nationwide calls in Japan using the au 4G/LTE network. ● It can be used without a license. Rentals are available for periods starting from one day across Japan. ● In the standard rental plan, it can be used in IP wireless mode (LTE). *Note: Using it as a WLAN transceiver or IP phone (landline/internal phone) requires prior configuration, so it is suitable for long-term rentals (subscription plans). ● There are no communication fees for rentals. ● Supports simultaneous calls. Primarily, it allows one-on-one communication similar to mobile phones, but it also supports multi-party calls where a third party can join the conversation at any time without waiting for the end of the conversation. In effect, there is no limit on the number of simultaneous calls. *Note: Simultaneous calls can be made even without using an earphone microphone. ● You can also choose a speaker microphone instead of an earphone microphone. ● It maintains IP57 waterproof and dustproof performance, functioning without issues even when used outdoors. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MPT-H1" is an IP radio manufactured by Mobile Create. No license application or personal qualifications are required; you can use it with just a simple registration. By utilizing the Docomo FOMA network, you can make calls anywhere in Japan. A communication network that is easy to use even in mountainous areas and between buildings has been adopted. Despite its robust body, it has a lightweight and compact design, allowing for safe long-term operation even in demanding environments. With an IP67 dust and water resistance rating, it can be used confidently in heavy rain, sand, and dust. By introducing a GPS function as an option, you can track the current location of the product owner from a PC or smartphone. It can be combined with the vehicle-mounted MPT-100 to build a large-scale communication system. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ No license application or registration required ■ Can make calls nationwide in Japan ■ IP67 dust and water resistance ■ Lightweight and compact body *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools
• Charger

The "MPT-100" is an IP radio manufactured by Mobile Create. It utilizes Docomo's LTE network, allowing for calls anywhere in Japan. It can communicate even in areas with poor signal reception, such as inside tunnels. All received audio can be recorded and played back. It operates with clear sound quality and has almost no dead zones. The auto power-off feature prevents battery drain by automatically turning off the device when there is no operation for a certain period. When combined with a GPS location management system, it can identify the current location of the communication partner. It can be powered from a household AC 100V outlet when used with a stabilized power supply or AC power cable, functioning as a command center for office use. We also offer a wide range of dedicated accessories. You can request a free demo unit to try out in advance, so please feel free to ask. 【Features】 ■ No license application or registration required ■ Usable for calls nationwide in Japan ■ Can be used as a base station ■ GPS functionality available *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The 5DV-450 (5DV450) is a 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 400 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as the director, the middle rod as the driven element, and the longest rod as the reflector, resulting in a highly directional antenna. It was invented in 1926. *It is primarily a fixed station radio antenna with a single directional pattern, composed mainly of the antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480 MHz. The model number changes based on the operating frequency. - 340 to 390 MHz: 5DV-450 F=340-390 - 390 to 480 MHz: 5DV-450 F=390-480 *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding design, it can be mounted with rear support. *The recommended mounting brackets for the antenna are C-30 or C-19(C). *For more details, please feel free to contact us.

• antenna

The 120CSSKH (120-CSSKH) is a 120cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and is compatible with J-Alert. *For more details, please feel free to contact us.*

• antenna

The HP798Ex IIC (HP798Ex 2C) is a specific low-power intrinsically safe explosion-proof portable radio manufactured by Hytera. No license or qualifications are required. No application is necessary. It has an intrinsically safe explosion-proof structure that meets JIS standards. Ex ib IIC T4 Gb (gas) / ib IIIC T120°C Db (dust). It can be safely used in hazardous areas where flammable gases and dust are present. It is a certified model according to the Japan Factory Electrical Equipment Explosion Protection Guidelines (International Harmonized Explosion Protection Guidelines 2020), and complies with international explosion protection standards "IECEx" and European explosion protection standards "ATEX." It meets MIL-STD-810H standards for shock resistance and durability. It has the strongest dustproof and waterproof performance with an IP68 rating. The operating temperature range is 25°C to 60°C. With AI noise canceling, it automatically removes noise according to the surrounding environment. It is equipped with a 2.4-inch LCD display. The battery life is as follows: - Included high-capacity battery (2,150mAh): up to 24 hours *Estimated time based on a transmission ratio of 5: reception 5: standby 90.

• others

● WX-SA002 (WXSA002) is a coaxial conversion unit manufactured by Panasonic. ● It is a unit that converts a LAN cable (CAT5/CAT5e/CAT6 straight cable) used for connecting a wireless antenna and a wireless receiver into a coaxial cable. ● By utilizing existing coaxial cables, it enables the use of a 1.9GHz band digital wireless system (for medium to large spaces). ● Coaxial cables can be used up to a maximum length of 100m. ● It is provided as a set for both the receiver side and the antenna side. ● When at least one coaxial conversion unit is connected, a maximum of 8 wireless microphones can be used. *For more details, please feel free to contact us.*

• others

The "UBZ-RJ27" is a specific low-power wireless repeater manufactured by JVC Kenwood. It can be used without the need for personal qualifications or registration. By combining it with a specific low-power transceiver from JVC Kenwood, you can extend the communication range. It employs a high-gain long antenna, allowing for comfortable communication even in areas where radio waves do not reach, such as underground, high floors, or separate buildings. In open areas, it can extend the range up to approximately 1 km. When combined with a separately sold lithium-ion battery, it can serve as an emergency power source, allowing for about 11.5 hours of operation during power outages. It can also be used in temporary operations where power supply is unavailable. Output switching is possible, allowing for safe installation even in environments with many precision devices. Power supply is possible simply by connecting a plug to a household AC outlet. A free trial is available before purchase, so please feel free to contact us. 【Features】 ■ Output switching is possible ■ Can be powered from household AC ■ Compact and lightweight for easy installation ■ Usable in tunnels and underground *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools
• Translation/Interpretation

The USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by ELECOM. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT to the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding the connectors).

• cable
• Other cable related products

The "FTR-308" is a specific low-power radio relay manufactured by Motorola. It can be used without the need for personal qualifications or registration. It can be combined with specific low-power transceivers from Motorola, Standard, and Yaesu to extend communication range. This relay allows for comfortable communication even in areas where radio waves do not reach, such as underground, high floors, or separate buildings. It features a circuit design that is resistant to interference in environments with many radio waves. It has a backlit display that makes it easy to check the current settings, even at night or in dark places. It is equipped with a built-in lithium-ion battery for emergency power, allowing operation for about 10 hours during power outages. The flexible antenna allows for easy installation without the need for construction on walls or ceilings. Power supply is possible simply by connecting a plug to a household AC outlet. A free trial is available before purchase, so please feel free to contact us. 【Features】 ■ Can be connected with up to 2 units ■ Can be powered from household AC ■ Equipped with a lithium-ion battery for use in emergencies ■ Usable in tunnels and underground *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

●CSE452 (CSE-452) is a CS/BS booster manufactured by Nippon Antenna, compatible with 3224MHz and has a gain of 45dB. ●It is a CS/BS booster that supports 4K and 8K broadcasting (3.2GHz) with a maximum gain of 45dB. ●It is a high-shield type that achieves unwanted radiation below 34dBμV/m with the device alone. ●It is designed for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

• others

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please indicate the fo (center frequency) in MHz when placing your order. ● It is a hole-mounting type shortened 150MHz band element. ● The feeding part connector has an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

• antenna

● BC-269 (BC269) is a connected charger manufactured by ICOM. The manufacturer model number is BC-269#11. ● Up to 6 BC-269 units can be connected to charge 6 IP transceivers (LTE + WLAN compatible) IP510H simultaneously. ● It is used in combination with a separately sold AC adapter. ・ When used as a connected charger with a maximum of 6 units: BC-228 ・ When used as a single charger: BC-123S#64 (straight plug) ● The charging times for the IP510H are as follows: ・ Lithium-ion battery pack BP-314: (approximately 2.5 hours) ・ Lithium-ion battery pack BP-315: (approximately 4 hours) ● The charger status is indicated by a two-color charging lamp. ・ Charging: Orange ・ Charging complete: Green ・ Abnormal occurrence: Orange blinking

• Charger

The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is primarily used for fixed station radio equipment and is composed of a single directional antenna with an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type design, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.

• antenna

● This is a lithium-ion battery made by ICOM, model BP-314 (BP314). The manufacturer's part number is BP-314#13. ● It is a medium-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ● The battery capacity is 2010mAh/7.2V. ● It has an IP67 equivalent structure for water and dust resistance. ● The operating time is as follows: - When used in LTE mode with the IP510H: approximately 18 hours - When used in WLAN mode with the IP510H: approximately 36 hours ● The charging time is as follows: - When using the AC adapter BC-258: approximately 120 minutes - When using the connected charger BC-269: approximately 150 minutes ● The waterproof performance corresponds to the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.*

• Lithium-ion battery

The "CL40" is a specific low-power transceiver manufactured by Motorola. It can be used without any personal qualifications or registration. With a simple key layout, it is easy for beginners to use. It features a built-in compander function that reduces background noise and makes voices easier to hear. With an IP57 dust and water resistance rating, you can use it safely even in rain or dusty conditions. The rotating foldable antenna allows for compact operation by folding the antenna. The sub-channel select function enables smooth communication even on crowded lines. It can operate for about 85 hours on three AA alkaline batteries. There is also the CL40L, which has a longer antenna for better signal transmission. You can choose from six colors to suit your usage environment. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. 【Features】 ■ Foldable antenna ■ IP57 dust and water resistance ■ Compander function that reduces noise ■ Operable with three AA alkaline batteries *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The HGW-400-PS-09 365-385 (HGW400PS09) is a high-gain element (5/8λ type) in the 400MHz band manufactured by Nippon Antenna. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. It can be used with vehicle-mounted radios operating in the 365MHz to 385MHz range. This is a 5/8λ collapsible whip antenna for the 400MHz band. The collapsible mechanism allows for 90 degrees to the left and right, and 0 to 360 degrees of rotation. It is equipped with an M.P type connector. Since it is only the antenna element, it must be used in combination with a separately sold antenna base. * For more details, please feel free to contact us.

• antenna

The BK-32ZR (BK32ZR) is a mounting bracket for CS/BS antennas made by Nippon Antenna. It is used to install satellite antennas under 50 cm on railings, grids, and walls. It complies with the RoHS directive. *For more details, please feel free to contact us.*

• antenna
• others

The ST#717BX is a base unit of a multi-user simultaneous communication wireless system manufactured by Tanizawa Seisakusho. No license application or registration is required for use. When combined with the separately sold handset ST#727M, this product allows for simultaneous communication without time limits for up to 11 people while coordinating work during the operation of cranes and other heavy machinery in manufacturing factories, thereby improving operational efficiency. Depending on the scale of the site, up to three ST#717BX base units can be linked together to adjust the number of users, allowing for efficient operation without waste by connecting only the necessary number of units. With simple operation and settings, even beginners can easily use it. It features an MCA (Multi-Channel Access) mode that automatically detects unused channels, enabling smoother communication. A wide range of dedicated accessories is also available. You can request a free demonstration unit to try out in advance, so please feel free to ask. 【Features】 ■ Up to 11 people can communicate simultaneously ■ Communication range of approximately 100m radius ■ Increased number of users possible with expansion ■ No license or registration required *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

●BB0014G (BB-0014-G) is a neck strap made by Alinco. ●It is used by attaching it to a specific low-power transceiver, preventing the main unit from falling. ●The strap length is 45 cm. ●It can be purchased as a replacement part. *For more details, please feel free to contact us.*

• others

The "EF-6195BX" is a digital MCA radio manufactured by Panasonic. A license application is required, but no personal qualifications are necessary for use. It is a vehicle-mounted digital MCA radio that allows wireless communication across the country through relay stations. It has a robust design that is resistant to vibrations and shocks when installed in a vehicle. It can be mounted in both 12V and 24V vehicles. If a speaker microphone is connected, it is possible to make calls while driving in accordance with road traffic laws. It also supports GPS location management systems, allowing users to track the current location of themselves and their communication partners. By combining it with a separately sold stabilized power supply, the EF-6195BX can be powered from a household AC 100V outlet for use as a command center in an office. We also offer a wide range of dedicated accessories. You can try out a demo unit for free in advance, so please feel free to ask. [Features] - No personal qualifications required - Calls possible while driving - Can be operated as a base station - Robust design resistant to shaking and shocks *For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools

● The WH-260-NJ-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling type antenna without cable, manufactured by Nippon Antenna. * F=260-275 represents the frequency, and (set) indicates that it is a set of elements, a base, and a coaxial cable. ● It has a drilling type base with a mounting hole diameter of Φ16mm. ● This is a set product that includes a vehicle-mounted drilling type base (element mounting part M-6 screw) without cable N-JWH-BAN-M6-09 and a 260MHz band vehicle-mounted 1/4λ element (for WH) EL274 (antenna length EL27.4cm). ● It is a λ/4 antenna for radios operating in the frequency range of 260-275MHz. * λ (lambda) refers to wavelength. ● It is a whip antenna with a drilling type mount. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It comes with an N-J type connector and is compatible with a mounting hole diameter of Φ16mm. ● This product complies with safety standards. * For more details, please feel free to contact us.

• antenna

The 12DV-450 (12DV450) is a 12-element Yagi antenna manufactured by Nippon Antenna for the 400MHz band. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *It is a single-directional fixed station radio antenna mainly composed of an antenna, reflector elements, and guiding elements. *It operates at a specified frequency within the range of 340 to 480MHz. Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-37(C). *For more details, please feel free to contact us.

• antenna

● The DJ-PX11 (DJPX11) is a specific low-power transceiver from Alinco (ALINCO) in the Lapel Talk 3 series. ● It is available in four color variations: DJ-PX11B (Black x Blue), DJ-PX11B (Black), DJ-PX11R (Black x Red), and DJ-PX11S (Black x Silver). ● With dimensions of approximately 3.3 cm in width, 8 cm in height, and 2.3 cm in depth, it has a lightweight design of about 51.3 g. The microphone and PTT are attached to the main unit. Audio is heard through separately sold earphones. ● It has been improved to be usable in "hard environments" compared to the conventional Lapel Talk series. With a strong IP67 dustproof and waterproof rating, it is safe to use in environments with water and dust. ● It supports simultaneous reception of two channels, allowing for interruptions during calls. ● It also enables simultaneous conversations between two parties, allowing for hands-free communication like a phone.

• others

The SBH-59 (SBH59) is a one-pocket charger sleeve manufactured by YAESU (Yaesu Musen/Standard Horizon). It is a single charger for the Standard Horizon specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. It is used in combination with the separately sold AC adapters for the linked charger, SAD-52A, SAD-35A, or the DC adapter with a cigarette plug, SDD-20. It allows for simultaneous charging when linked together. - Up to 10 units can be linked when used with SAD-52A. - Up to 6 units can be linked when used with SDD-20. It is equipped with an LED lamp that indicates the charging status: - Red light: Charging - Green light: Charging complete - Red blinking: Charging error The charging times are as follows: - For the lithium-ion battery SBR-42LI: Approximately 3 hours - For the compact high-capacity lithium-ion battery SBR-51LI: Approximately 3 hours *For more details, please feel free to contact us.

• Charger

● EDC-346 (EDC346) is a 10-port charging stand manufactured by Alinco. ● It is a connected charger that can charge up to 10 units of the specific low-power transceiver Raper Talk 3DJ-PX11 simultaneously. ● It is used in combination with the separately sold AC adapter for connection, EDC-162. It can be charged from a household power supply of AC100V. ● The charging time is a maximum of about 4 hours and supports fast charging. ● With built-in Bluetooth, it can connect to a smartphone, allowing you to configure the functions of the DJ-PX11 placed on the stand using a free app. * Please search for DJ-PX11 in the App Store or Google Play for the app. You can choose between setting it up on a PC connected via USB or on a smartphone connected via Bluetooth to the charging stand EDC-345A or EDC-346. * For more details, please feel free to contact us.

• Charger

The DJ-DP50HB is a UHF band digital simple radio registered station manufactured by Alinco. No license application or personal qualifications are required; it can be used with just a simple registration. It is a digital simple radio registered station operating in the UHF 351MHz band. With a high output of 5W, it enables stable communication with minimal interference. The large display with a backlight makes it easy to check the current settings, even in the dark or at night. It is equipped with a variety of features that are ideal for improving work efficiency. It has an IP67 dustproof and waterproof rating, making it safe to use in sudden rain, water splashes, or dusty environments. It can also be used in sub-zero temperatures, allowing operation in places like cold storage warehouses. By combining it with the separately sold vehicle-mounted digital simple radio DR-DPM50 as a base station, you can build a system for more efficient group communication. We also offer a wide range of dedicated accessories. You can try it for free before purchasing, so please feel free to contact us. 【Features】 ■ No license or qualifications required ■ 5W high output ■ IP67 dustproof and waterproof performance ■ Advanced encryption features ■ 300mW loudspeaker *For more details, please feel free to contact us.

• Other network tools

The EME-66ZC (EME66ZC) is a canal-type twist cord earphone made by Alinco. It is designed for use with the specific low-power transceiver Lapel Talk 3DJ-PX11. Being a canal-type that fits inside the ear, it is easy to hear sounds even in noisy environments. The plug is a straight type. The cable length is approximately 50 cm. *For more details, please feel free to contact us.*

• others

The TCP-D751CT is a digital simple radio that integrates a licensed station 3B/3C/3D (467MHz band) and a registered station 3R/3T (351MHz band) manufactured by JVC Kenwood. It is a higher model of the JVC Kenwood digital simple radio licensed station TCP-D251C. By utilizing JVC Kenwood's proprietary direct conversion technology, it achieves a dual-band simple radio that covers the frequency range of 350MHz to 470MHz. It offers a total of 167 channels, including 82 channels for registered stations and 85 channels for licensed stations. In environments where both a licensed and a registered station are required, this product can serve as a single solution, significantly reducing hassle and burden. In addition to the main channel, it supports a second PTT function that allows standby and transmission on a different channel. With high sound quality characteristic of an audio manufacturer, it features an easy-to-listen-to and fatigue-free sound quality, providing top-class digital audio that is very close to natural voice with low noise and minimal delay. *For more details, please feel free to contact us.

• Other network tools

●D-2601 (D2601) is a 260MHz band 2-way splitter manufactured by Nippon Antenna, operating in the 260-275MHz range. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is 260-275MHz or a specified frequency within that range. Please specify the operating frequency when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1950mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

• others

●PMLN8536 (PMLN-8536) is an earpiece made by Motorola. ●It is a headset microphone for the Motorola Wave PTX device TLK25. ●This is the standard configuration item for PMLN8536. It can be purchased as a replacement or spare. ●There is a microphone with a PTT button on the cord. ●The cord has a clip that can be attached to clothing or other items. *For more details, please feel free to contact us.*

• others

The WX-SM405 (WXSM405) is a headset microphone made by Panasonic (PANASONIC) for the WX-ST400. It is a headset specifically designed for the separately sold 1.9GHz digital wireless microphone system, the WX-ST400 (tie-clip type). It is a hands-free type that allows both hands to be free. It is an ear-hook type, providing a stable fit and a lightweight design that reduces fatigue even during extended use. *For more details, please contact us.*

• others

●D-0601 (D0601) is a 60MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals to various terminals such as radios. ●The supported frequency range is a specified frequency of 50 to 75MHz. Please specify the fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. *For more details, please feel free to contact us.*

• others

The EME-684M (EME684M) is a twist-code earphone (ear-hook type, single-axis screw-in) manufactured by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is designed to hook over the ear, it is less likely to fall off and is comfortable for long periods of use. The plug is a single-axis screw-in type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.

• others

●D-9301 (D9301) is a 900MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is 850 to 940MHz. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.

• others

The SRNX1D (SR-NX1D) is a portable business IP communication device (IP radio) manufactured by YAESU (Standard Horizon/Yaesu Musen). It is equipped with dual SIM slots compatible with both au and Docomo carriers, allowing customers to select their preferred communication SIM from the settings menu. This feature makes it easy to switch carriers during communication disruptions in mobile networks, making it ideal for BCP (Business Continuity Planning) situations. Additionally, calls can be made via Wi-Fi. It offers powerful noise-canceling capabilities and clear calls with high sound quality and volume at 1000mW, making conversations easy to understand. The large color display provides high visibility and operability. Users can easily manage simultaneous/group/individual calls and switch groups effortlessly. Hands-free simultaneous calls are also possible, supporting multiple participants through the built-in microphone/speaker with echo cancellation. The device boasts strong dust and water resistance with an IP67 rating.

• others

● The EMS-100 (EMS100) is a waterproof speaker microphone made by Alinco. ● It is a speaker microphone for Alinco's vehicle-mounted digital simple radio. ● The audio output is 800mW. ● It has an IP67 dustproof and waterproof rating. ● It can be attached to the jack on the rear panel of the vehicle-mounted digital simple radio registered station 3R/3TDR-DPM80, and can be used as a twin microphone along with the standard waterproof speaker microphone EMS-97 that comes with the DR-DPM80 main unit. ● It has a 5m straight cable. ● The connector is a 1-axis 4-pole screw type. *For more details, please feel free to contact us.*

• others

The EME-68ZM (EME68ZM) is a twist cord earphone (ear hook type, straight single-axis) made by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is designed to be worn over the ear, it is less likely to fall off and is comfortable for long periods of use. The plug is a straight single-axis type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.

• others