エクセリ List of Products and Services

The 120CSSKH (120-CSSKH) is a 120cm snow-melting device equipped CS antenna manufactured by Nippon Antenna. It is a 120cm type antenna for receiving one satellite with a snow-melting device. This antenna is designed to prevent snow damage, equipped with heaters on the reflector and converter arm, as well as a converter roof. It can be used in combination with various CS converter units. The antenna mount and CS converter unit are sold separately. The compatible mast diameter is φ114.3mm. It is a RoHS compliant product and is compatible with J-Alert. *For more details, please feel free to contact us.*

• antenna

The HP798Ex IIC (HP798Ex 2C) is a specific low-power intrinsically safe explosion-proof portable radio manufactured by Hytera. No license or qualifications are required. No application is necessary. It has an intrinsically safe explosion-proof structure that meets JIS standards. Ex ib IIC T4 Gb (gas) / ib IIIC T120°C Db (dust). It can be safely used in hazardous areas where flammable gases and dust are present. It is a certified model according to the Japan Factory Electrical Equipment Explosion Protection Guidelines (International Harmonized Explosion Protection Guidelines 2020), and complies with international explosion protection standards "IECEx" and European explosion protection standards "ATEX." It meets MIL-STD-810H standards for shock resistance and durability. It has the strongest dustproof and waterproof performance with an IP68 rating. The operating temperature range is 25°C to 60°C. With AI noise canceling, it automatically removes noise according to the surrounding environment. It is equipped with a 2.4-inch LCD display. The battery life is as follows: - Included high-capacity battery (2,150mAh): up to 24 hours *Estimated time based on a transmission ratio of 5: reception 5: standby 90.

• others

● WX-SA002 (WXSA002) is a coaxial conversion unit manufactured by Panasonic. ● It is a unit that converts a LAN cable (CAT5/CAT5e/CAT6 straight cable) used for connecting a wireless antenna and a wireless receiver into a coaxial cable. ● By utilizing existing coaxial cables, it enables the use of a 1.9GHz band digital wireless system (for medium to large spaces). ● Coaxial cables can be used up to a maximum length of 100m. ● It is provided as a set for both the receiver side and the antenna side. ● When at least one coaxial conversion unit is connected, a maximum of 8 wireless microphones can be used. *For more details, please feel free to contact us.*

• others

The USB3-AFCM01BK (USB3AFCM01BK) is a USB conversion cable A to C made by ELECOM. It is necessary when connecting the main unit ST#7704 of the remote support wearable camera U-BOX AT to the stabilization cameras CX-WE100 and CX-WE300. It converts the connector of the stabilization cameras CX-WE100 and CX-WE300 from Type-A to Type-C. *For U-BOX AT (WT/WZ) DE200, it is not needed as there is a Type-A interface. The cable length is approximately 8 cm (excluding the connectors).

• cable
• Other cable related products

●CSE452 (CSE-452) is a CS/BS booster manufactured by Nippon Antenna, compatible with 3224MHz and has a gain of 45dB. ●It is a CS/BS booster that supports 4K and 8K broadcasting (3.2GHz) with a maximum gain of 45dB. ●It is a high-shield type that achieves unwanted radiation below 34dBμV/m with the device alone. ●It is designed for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

• others

● The WH-150-84(HE)-09EL is a 150MHz band element manufactured by Nippon Antenna. ● It is a capacitive grounded λ/4 whip antenna for 150MHz band radios. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It is designed for a specified frequency within the range of 140 to 170MHz. Please indicate the fo (center frequency) in MHz when placing your order. ● It is a hole-mounting type shortened 150MHz band element. ● The feeding part connector has an M6×1 female thread. It is used in combination with the separately sold WH-84-09 kit. * For more details, please feel free to contact us.

• antenna

● BC-269 (BC269) is a connected charger manufactured by ICOM. The manufacturer model number is BC-269#11. ● Up to 6 BC-269 units can be connected to charge 6 IP transceivers (LTE + WLAN compatible) IP510H simultaneously. ● It is used in combination with a separately sold AC adapter. ・ When used as a connected charger with a maximum of 6 units: BC-228 ・ When used as a single charger: BC-123S#64 (straight plug) ● The charging times for the IP510H are as follows: ・ Lithium-ion battery pack BP-314: (approximately 2.5 hours) ・ Lithium-ion battery pack BP-315: (approximately 4 hours) ● The charger status is indicated by a two-color charging lamp. ・ Charging: Orange ・ Charging complete: Green ・ Abnormal occurrence: Orange blinking

• Charger

The 2DV-450 (2DV450) is a 2-element Yagi antenna manufactured by Nippon Antenna, designed for the 400MHz band. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod acting as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This antenna is primarily used for fixed station radio equipment and is composed of a single directional antenna with an antenna, reflector element, and director element. *It operates at a specified frequency within the range of 340 to 480MHz. The model number changes depending on the operating frequency. - 340-390MHz: 2DV-450 F=340-390 specified - 390-480MHz: 2DV-450 F=390-480 specified *Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type design, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-28-1A. *For more details, please feel free to contact us.

• antenna

● This is a lithium-ion battery made by ICOM, model BP-314 (BP314). The manufacturer's part number is BP-314#13. ● It is a medium-capacity battery for the IP transceiver (LTE + WLAN compatible) IP510H. ● The battery capacity is 2010mAh/7.2V. ● It has an IP67 equivalent structure for water and dust resistance. ● The operating time is as follows: - When used in LTE mode with the IP510H: approximately 18 hours - When used in WLAN mode with the IP510H: approximately 36 hours ● The charging time is as follows: - When using the AC adapter BC-258: approximately 120 minutes - When using the connected charger BC-269: approximately 150 minutes ● The waterproof performance corresponds to the connected main unit. The IP510H is IPX7 waterproof. *For more details, please feel free to contact us.*

• Lithium-ion battery

The HGW-400-PS-09 365-385 (HGW400PS09) is a high-gain element (5/8λ type) in the 400MHz band manufactured by Nippon Antenna. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. It can be used with vehicle-mounted radios operating in the 365MHz to 385MHz range. This is a 5/8λ collapsible whip antenna for the 400MHz band. The collapsible mechanism allows for 90 degrees to the left and right, and 0 to 360 degrees of rotation. It is equipped with an M.P type connector. Since it is only the antenna element, it must be used in combination with a separately sold antenna base. * For more details, please feel free to contact us.

• antenna

The BK-32ZR (BK32ZR) is a mounting bracket for CS/BS antennas made by Nippon Antenna. It is used to install satellite antennas under 50 cm on railings, grids, and walls. It complies with the RoHS directive. *For more details, please feel free to contact us.*

• antenna
• others

●BB0014G (BB-0014-G) is a neck strap made by Alinco. ●It is used by attaching it to a specific low-power transceiver, preventing the main unit from falling. ●The strap length is 45 cm. ●It can be purchased as a replacement part. *For more details, please feel free to contact us.*

• others

● The WH-260-NJ-09 F=260-275 (set) is a 260MHz band vehicle-mounted drilling type antenna without cable, manufactured by Nippon Antenna. * F=260-275 represents the frequency, and (set) indicates that it is a set of elements, a base, and a coaxial cable. ● It has a drilling type base with a mounting hole diameter of Φ16mm. ● This is a set product that includes a vehicle-mounted drilling type base (element mounting part M-6 screw) without cable N-JWH-BAN-M6-09 and a 260MHz band vehicle-mounted 1/4λ element (for WH) EL274 (antenna length EL27.4cm). ● It is a λ/4 antenna for radios operating in the frequency range of 260-275MHz. * λ (lambda) refers to wavelength. ● It is a whip antenna with a drilling type mount. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. ● It comes with an N-J type connector and is compatible with a mounting hole diameter of Φ16mm. ● This product complies with safety standards. * For more details, please feel free to contact us.

• antenna

The 12DV-450 (12DV450) is a 12-element Yagi antenna manufactured by Nippon Antenna for the 400MHz band. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. *It is a single-directional fixed station radio antenna mainly composed of an antenna, reflector elements, and guiding elements. *It operates at a specified frequency within the range of 340 to 480MHz. Please specify the center frequency (fo/MHz) when placing your order. *The supply section and element blanket are molded with reinforced resin. *Due to its protruding type, it can be mounted with rear support. *The recommended mounting bracket for the antenna is C-37(C). *For more details, please feel free to contact us.

• antenna

● The DJ-PX11 (DJPX11) is a specific low-power transceiver from Alinco (ALINCO) in the Lapel Talk 3 series. ● It is available in four color variations: DJ-PX11B (Black x Blue), DJ-PX11B (Black), DJ-PX11R (Black x Red), and DJ-PX11S (Black x Silver). ● With dimensions of approximately 3.3 cm in width, 8 cm in height, and 2.3 cm in depth, it has a lightweight design of about 51.3 g. The microphone and PTT are attached to the main unit. Audio is heard through separately sold earphones. ● It has been improved to be usable in "hard environments" compared to the conventional Lapel Talk series. With a strong IP67 dustproof and waterproof rating, it is safe to use in environments with water and dust. ● It supports simultaneous reception of two channels, allowing for interruptions during calls. ● It also enables simultaneous conversations between two parties, allowing for hands-free communication like a phone.

• others

The SBH-59 (SBH59) is a one-pocket charger sleeve manufactured by YAESU (Yaesu Musen/Standard Horizon). It is a single charger for the Standard Horizon specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. It is used in combination with the separately sold AC adapters for the linked charger, SAD-52A, SAD-35A, or the DC adapter with a cigarette plug, SDD-20. It allows for simultaneous charging when linked together. - Up to 10 units can be linked when used with SAD-52A. - Up to 6 units can be linked when used with SDD-20. It is equipped with an LED lamp that indicates the charging status: - Red light: Charging - Green light: Charging complete - Red blinking: Charging error The charging times are as follows: - For the lithium-ion battery SBR-42LI: Approximately 3 hours - For the compact high-capacity lithium-ion battery SBR-51LI: Approximately 3 hours *For more details, please feel free to contact us.

• Charger

● EDC-346 (EDC346) is a 10-port charging stand manufactured by Alinco. ● It is a connected charger that can charge up to 10 units of the specific low-power transceiver Raper Talk 3DJ-PX11 simultaneously. ● It is used in combination with the separately sold AC adapter for connection, EDC-162. It can be charged from a household power supply of AC100V. ● The charging time is a maximum of about 4 hours and supports fast charging. ● With built-in Bluetooth, it can connect to a smartphone, allowing you to configure the functions of the DJ-PX11 placed on the stand using a free app. * Please search for DJ-PX11 in the App Store or Google Play for the app. You can choose between setting it up on a PC connected via USB or on a smartphone connected via Bluetooth to the charging stand EDC-345A or EDC-346. * For more details, please feel free to contact us.

• Charger

The DJ-DP50HB is a UHF band digital simple radio registered station manufactured by Alinco. No license application or personal qualifications are required; it can be used with just a simple registration. It is a digital simple radio registered station operating in the UHF 351MHz band. With a high output of 5W, it enables stable communication with minimal interference. The large display with a backlight makes it easy to check the current settings, even in the dark or at night. It is equipped with a variety of features that are ideal for improving work efficiency. It has an IP67 dustproof and waterproof rating, making it safe to use in sudden rain, water splashes, or dusty environments. It can also be used in sub-zero temperatures, allowing operation in places like cold storage warehouses. By combining it with the separately sold vehicle-mounted digital simple radio DR-DPM50 as a base station, you can build a system for more efficient group communication. We also offer a wide range of dedicated accessories. You can try it for free before purchasing, so please feel free to contact us. 【Features】 ■ No license or qualifications required ■ 5W high output ■ IP67 dustproof and waterproof performance ■ Advanced encryption features ■ 300mW loudspeaker *For more details, please feel free to contact us.

• Other network tools

The EME-66ZC (EME66ZC) is a canal-type twist cord earphone made by Alinco. It is designed for use with the specific low-power transceiver Lapel Talk 3DJ-PX11. Being a canal-type that fits inside the ear, it is easy to hear sounds even in noisy environments. The plug is a straight type. The cable length is approximately 50 cm. *For more details, please feel free to contact us.*

• others

The TCP-D751CT is a digital simple radio that integrates a licensed station 3B/3C/3D (467MHz band) and a registered station 3R/3T (351MHz band) manufactured by JVC Kenwood. It is a higher model of the JVC Kenwood digital simple radio licensed station TCP-D251C. By utilizing JVC Kenwood's proprietary direct conversion technology, it achieves a dual-band simple radio that covers the frequency range of 350MHz to 470MHz. It offers a total of 167 channels, including 82 channels for registered stations and 85 channels for licensed stations. In environments where both a licensed and a registered station are required, this product can serve as a single solution, significantly reducing hassle and burden. In addition to the main channel, it supports a second PTT function that allows standby and transmission on a different channel. With high sound quality characteristic of an audio manufacturer, it features an easy-to-listen-to and fatigue-free sound quality, providing top-class digital audio that is very close to natural voice with low noise and minimal delay. *For more details, please feel free to contact us.

• Other network tools

●D-2601 (D2601) is a 260MHz band 2-way splitter manufactured by Nippon Antenna, operating in the 260-275MHz range. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is 260-275MHz or a specified frequency within that range. Please specify the operating frequency when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1950mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

• others

●PMLN8536 (PMLN-8536) is an earpiece made by Motorola. ●It is a headset microphone for the Motorola Wave PTX device TLK25. ●This is the standard configuration item for PMLN8536. It can be purchased as a replacement or spare. ●There is a microphone with a PTT button on the cord. ●The cord has a clip that can be attached to clothing or other items. *For more details, please feel free to contact us.*

• others

The WX-SM405 (WXSM405) is a headset microphone made by Panasonic (PANASONIC) for the WX-ST400. It is a headset specifically designed for the separately sold 1.9GHz digital wireless microphone system, the WX-ST400 (tie-clip type). It is a hands-free type that allows both hands to be free. It is an ear-hook type, providing a stable fit and a lightweight design that reduces fatigue even during extended use. *For more details, please contact us.*

• others

●D-0601 (D0601) is a 60MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals to various terminals such as radios. ●The supported frequency range is a specified frequency of 50 to 75MHz. Please specify the fo (center frequency) in MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. *For more details, please feel free to contact us.*

• others

The EME-684M (EME684M) is a twist-code earphone (ear-hook type, single-axis screw-in) manufactured by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is designed to hook over the ear, it is less likely to fall off and is comfortable for long periods of use. The plug is a single-axis screw-in type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.

• others

●D-9301 (D9301) is a 900MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the isolation is not achieved in the transmitter/receiver splitter, please use it only for antenna coupling. ●The supported frequency range is 850 to 940MHz. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact our company.

• others

The SRNX1D (SR-NX1D) is a portable business IP communication device (IP radio) manufactured by YAESU (Standard Horizon/Yaesu Musen). It is equipped with dual SIM slots compatible with both au and Docomo carriers, allowing customers to select their preferred communication SIM from the settings menu. This feature makes it easy to switch carriers during communication disruptions in mobile networks, making it ideal for BCP (Business Continuity Planning) situations. Additionally, calls can be made via Wi-Fi. It offers powerful noise-canceling capabilities and clear calls with high sound quality and volume at 1000mW, making conversations easy to understand. The large color display provides high visibility and operability. Users can easily manage simultaneous/group/individual calls and switch groups effortlessly. Hands-free simultaneous calls are also possible, supporting multiple participants through the built-in microphone/speaker with echo cancellation. The device boasts strong dust and water resistance with an IP67 rating.

• others

● The EMS-100 (EMS100) is a waterproof speaker microphone made by Alinco. ● It is a speaker microphone for Alinco's vehicle-mounted digital simple radio. ● The audio output is 800mW. ● It has an IP67 dustproof and waterproof rating. ● It can be attached to the jack on the rear panel of the vehicle-mounted digital simple radio registered station 3R/3TDR-DPM80, and can be used as a twin microphone along with the standard waterproof speaker microphone EMS-97 that comes with the DR-DPM80 main unit. ● It has a 5m straight cable. ● The connector is a 1-axis 4-pole screw type. *For more details, please feel free to contact us.*

• others

The EME-68ZM (EME68ZM) is a twist cord earphone (ear hook type, straight single-axis) made by Alinco. It is an earphone for the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is designed to be worn over the ear, it is less likely to fall off and is comfortable for long periods of use. The plug is a straight single-axis type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.

• others

●PMLN8537 (PMLN-8537) is a holster made by Motorola. ●It can be attached to belts and other items for the Motorola Wave PTX device TLK25. ●It comes with a rotating clip. *For more details, please feel free to contact us.*

• others

The GB-450A(CF)-09 is a 400MHz band vehicle-mounted whip antenna (3D-2V) manufactured by Nippon Antenna. It is designed for the Toyota Comfort. This is a 3/4λ whip antenna for vehicle-mounted radios. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. The absolute gain is 2.15dB. It comes with an antenna element, a magnetic base, and a 3D-2V coaxial cable (5m). *Connectors are not included. It features an easy-to-thread attachment method, so after threading, you will need to attach a separately sold attachment connector to connect it to the radio. It is mounted on the roof side. It is for a specified frequency within 350-470MHz. *For more details, please feel free to contact our company.

• antenna

●CSEA25 (CSEA-25) is a CS/BS preamplifier manufactured by Nippon Antenna. ●It has a maximum gain of 22dB. ●This preamplifier is compatible with 4K and 8K broadcasts (3.2GHz) and is used when connecting a receiving amplifier to a receiving antenna. ●It amplifies BS-C-IP signals (1000–3224MHz) while allowing FM, VHF, and UHF signals (10–770MHz) to pass through. ●Current can pass between the output terminal and the BS/CS input terminal. ●Current can pass between the output terminal and the U/V input terminal with a switch operation. ●When installing on a mast, please use a separately sold HI Kanagu or commercially available stainless steel band. ●It is designed for joint reception. ●It is a RoHS compliant product. ●It is compatible with J-Alert. *For more details, please feel free to contact us.

• others

●D-4001 (D4001) is a 400MHz band 2-way splitter manufactured by Nippon Antenna. ●It evenly distributes high-frequency signals from devices such as radios to two antennas. However, if the splitter does not provide isolation for transmission and reception, please use it only for antenna coupling. ●The supported frequency range is specified frequencies from 330 to 470MHz or within a bandwidth of 20MHz. Please specify fo (center frequency) MHz when placing your order. ●The connector on the antenna side is NP, and on the radio side, it is NJ. ●The coaxial cable length is 1450mm. ●It is waterproof, making it suitable for outdoor use. *For more details, please feel free to contact us.*

• others

●PMLN8538 (PMLN-8538) is a badge clip made by Motorola. ●It is a holster badge clip for the Motorola Wave PTX device TLK25. ●It is used to clip the TLK25 to clothing or other items. *For more details, please feel free to contact us.*

• others

● The WX-SZ200 (WXSZ200) is a charger made by Panasonic. ● It comes with a dedicated AC adapter. ● It is a charger for 1.9GHz band digital wireless microphones. ● It is specifically designed for the wireless microphones WX-ST200, WX-ST210, WX-ST250, and WX-ST400. ● It can charge two wireless microphones simultaneously. ● It uses a contactless charging method without contact terminals, which reduces the risk of contact failure due to dirt on the contacts, allowing for stable operation. ● The full charging time for the wireless microphone is approximately 6 hours when using AA size nickel-metal hydride batteries BK-3MCC. *For more details, please feel free to contact us.*

• Charger

● The WX-ST510 (WXST510) is a wireless transmitter manufactured by Panasonic. ● It is a portable wireless transmitter for a 1.9GHz digital wireless microphone system. It enables stable communication with high sound quality and strong resistance to radio interference and crosstalk. ● It can transmit up to 4 inputs (2 channels of wired microphones and 2 channels of microphone/line audio) to a wireless receiver. In addition to microphones, it can connect 2 audio media inputs such as CD players, totaling 4 inputs. ● You can connect an optional wired microphone (balanced input: large dual jack 600 Ω, input sensitivity: -54 dBV) and use it as a wireless microphone. ● It can be powered by four AA alkaline batteries (approximately 24 hours of use) or a USB power adapter. ● It features an attenuator function that detects the volume level of input 1 and automatically reduces the volume of inputs 2 to 4. ● The antenna is a whip antenna. * A whip antenna is an antenna that has no directionality and can receive and transmit signals from any angle. * For more details, please feel free to contact us.

• others

The SV-S60 (SVS60) is a dynamic management system iGPS7plus2 manufactured by Smart Wave Telecommunications (Tom Communication Industry). It allows for the management of the location and status of IP radios such as the SV-2000 (vehicle-mounted) and SK-5000 (portable) on company PCs. It is an on-premises type that excels in security and stability compared to cloud-based systems, operating on NTT Docomo's network + private network. The location and status of the IP radios can be automatically updated every 15 seconds, and the latest information can be obtained with each call. It is also possible to retain all log data for one year.

• Other operation management software

The EME-664C (EME664C) is a twist-code earphone (canal type, single-axis screw-in) manufactured by Alinco. It is designed for use with the specific low-power transceiver Lapel Talk 3DJ-PX11. Since it is a canal-type earphone that fits inside the ear, it is easy to hear sounds even in noisy environments. The plug is a single-axis screw-in type. The cable length is approximately 50 cm. *For more details, please feel free to contact our company.*

• others

The D220S (D-220-S) is a compact mobile disc cone antenna manufactured by Diamond Antenna. * A disc cone antenna is a plate-type antenna composed of a disc and a cone. It has a very wide usable frequency range and is lightweight and wind-resistant due to the disc and cone being used as elements. * It is an antenna for radios. * It can receive frequencies from 100 to 1600 MHz for wideband receivers. * It can transmit in the 144/430/1200 MHz bands (DIGITAL compatible). * It features a compact design. * It is a completely omnidirectional antenna. * An omnidirectional antenna is one that can transmit and receive radio waves from all directions. * It has an MP connector. * This product is for sale only and cannot be explained in detail. * It complies with the European environmental regulation RoHS directive. * For more details, please feel free to contact us.

• antenna

● EMS-97 (EMS97) is a waterproof speaker microphone manufactured by Alinco. ● It is a speaker microphone for Alinco's vehicle-mounted digital simple radio. ● The audio output is 800mW. ● It is convenient with buttons for PTT, up/down, sub PTT, function, and back, allowing various settings without touching the main unit of the radio. ● It has an IP67 dustproof and waterproof rating. ● It is the microphone included in the standard configuration of the vehicle-mounted digital simple radio registered station 3R/3TDR-DPM80. ● The connector shape is modular. *For more details, please feel free to contact us.*

• others

●AN0435H15 (AN-0435-H15) is an antenna manufactured by Hytera. ●It is an antenna for the Hytera intrinsically safe explosion-proof radios HP71XEx IIC and HP79XEx IIC. ●The antenna connector is SMA-J. *For more details, please feel free to contact us.*

• antenna

The J-Mobile's "NEXNET2 A906" is an IP radio that can communicate anywhere in Japan as long as it is within the communication area of Docomo's 3G and LTE networks. ● There are two types: the A906 P.Talk2.0 and A906 P.Talk3.0, using Korean and Japanese servers respectively. ● The differences between A906 P.Talk2.0 and A906 P.Talk3.0 are as follows: - A906 P.Talk2.0: Uses the Korean server. Features include voice calls, GPS, and chat. - A906 P.Talk3.0: Uses the Japanese server. Features include voice calls, GPS, chat, video sharing, video PTT, and sending/receiving still images and videos. ● The following IP radios are compatible: - Can communicate with A906 P.Talk2.0: A901, A901M, A902, A902C, Z05R, Android app P.APP (for P.Talk2.0) FMPL002-00 - Can communicate with A906 P.Talk3.0: Z06R, Android app P.APP (for P.Talk3.0) FMPL007-00 * Communication will be in the P.Talk version. The MotoTalk version cannot be used.

• Other network tools

● The DJ-P240 (DJP240) is a specific low-power transceiver manufactured by Alinco. ● You can choose from three types based on your usage: the long antenna DJ-P240L, which emphasizes communication distance; the middle antenna DJ-P240M, which balances communication distance and compactness; and the short antenna DJ-P240S, which excels in portability. ● This transceiver is recommended for service industries such as restaurants and apparel shops. ● It features a convenient "Customer Service Mode (patented)" function that allows you to instantly lower the transceiver's reception volume by simply touching the clip microphone part of the earphone microphone, and it automatically returns to the original volume after a certain period. It does not interfere with conversations with customers. * It does not operate with earphone microphones other than Alinco's genuine products. * It does not operate with speaker microphones or the built-in microphone. ● It has two PTT buttons, allowing you to pre-set any transmission channel. ● The body is made of exceptionally robust polycarbonate. ● It has an IP67 dust and water resistance rating. * For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The NMPS606A (NMPS-606-A) is an uninterruptible power supply (AC60V type) manufactured by Nippon Antenna. It automatically switches to battery power during a power outage, supplying electricity to communal reception facilities. Under normal conditions, it steps down commercial power from AC100V to AC60V to supply power to the load while simultaneously charging the battery. The installed battery is a small sealed lead-acid battery of DC12V24Ah (20HR). It consists of a transformer, inverter, charger, and battery. It comes in a stainless steel drip-proof case. The safety circuit allows operation solely on commercial power, enabling maintenance of the control unit and battery replacement without power interruption. It is equipped with STM output terminals (contact output terminals) and measurement terminals for load current verification, making maintenance and inspection easy. There is also a 100V emergency input connector for power outages lasting more than two hours or unforeseen circumstances. Please choose a steel pipe column with a diameter of φ140 to 350mm for installation. *For more details, please feel free to contact us.*

• UPS/Uninterruptible Power Supply

The IP110H (IP-110H) is a WLAN transceiver manufactured by Icom. It is a special product for Excellirise that can be used at a low rental fee with a long-term contract. No licenses, qualifications, or monthly communication fees are required! It communicates using a Wi-Fi network. A wireless access point (with IP1000C functionality) AP-9500#11 is needed for connection. In addition to the usual push-to-talk (PTT) alternating communication, it also supports hands-free simultaneous communication, allowing for two-way conversations like a phone. There are no limits on the number of participants for either alternating or simultaneous communication. Individual call communication is also possible. Additionally, it can connect via an internet VPN, enabling communication with remote locations. It has Bluetooth functionality, allowing the use of optional Bluetooth accessories. The battery life is approximately 20 hours. *Estimated time based on usage of 1 hour receiving, 1 hour transmitting, and 8 hours on standby. It has IP67/IP54 dustproof and waterproof performance, making it safe to use in wet or dusty environments. With antibacterial and antiviral processing using Cellfeel, it is safe to use even in a COVID environment.

• others