エクセリ List of Products and Services

●LCY026 (LCY-026) is a carrying case made by Hytera. ●It is a protective case for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is explosion-proof. ●It protects the HP708 from dirt and impact. ●It is made of high-quality black leather. ●It is compatible with radios that have a display. ●It can be worn while using an earpiece. *For more details, please feel free to contact us.*

• Other network tools

●B-RFXM (BRFXM) is the VoiSniper voice sniper RFXM made by Bear (B-EAR). ●It is used with Bear's simultaneous communication type specific low-power transceivers BRIDGECOM X5 (BM-X5), BRIDGECOM X10 (BM-X10), BRIDGECOM X10 Compact (BM-X10CP), and BRIDGECOM X10 Athlete (BM-X10AT). ●It is a dual-head plug voice sniper that can be used on both the left and right sides. ●The ear hook is designed to be easy to wear and difficult to fall off. ●It is sweat-resistant, so you can use it with confidence even if you sweat. ●The microphone located near the mouth is an omnidirectional microphone, which picks up sound from any angle. ●It comes with a windscreen sponge to reduce wind noise. ●It has a clip to secure the cord at the chest. ●By attaching the included ear silicone mold BM-ESM or ear silicone mold light BM-ESL to canal-type earphones, it can be fixed in the ear groove. This makes it less likely to cause ear pain during long-term use and prevents it from falling out during use. ●It is ideal for situations where you want to use a radio hands-free, such as in construction or work sites.

• Other network tools

●AN0435H25 (AN-0435H-25) is an antenna manufactured by Hytera. ●It is an antenna for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ●It is a standard component of the HP708 main unit and can be purchased as a spare or replacement. ●The antenna length is 9 cm. ●The antenna connector is SMA-J. ●It is compatible with GPS/Glonass. ●It supports frequencies of 400–470 MHz and 1575 MHz. ●It complies with the European environmental regulation RoHS. *For more details, please feel free to contact us.*

• Other network tools

The WL-AC1000 (WLAC1000) is a photocatalytic sterilization and deodorization device called fresair, manufactured by JVC Kenwood. It features the patented ALMION filter technology, which rapidly decomposes odors. *This is a patented technology of APS Japan Co., Ltd. *The ALMION filter has a self-cleaning effect, making maintenance easy and cost-effective. *The ALMION filter uses photocatalytic action to convert invisible viruses, bacteria, and odors in the air into water and carbon dioxide. It can cover an area of up to 25 tatami mats, circulating the air in approximately 60 minutes for 25 tatami mats and about 19 minutes for 8 tatami mats. This is a high-performance model specifically designed for sterilization and deodorization. Its compact size of 8 cm in depth allows for installation anywhere. The included remote control makes it easy to operate from a distance. It operates on a household power supply of AC100V. *For more details, please feel free to contact us.

• Other network tools

The SX27P (SX-27P) is a compact SWR and power meter manufactured by Daiwa (Diamond Antenna) for the 144/430MHz band. It is a measuring device for radios. It can read power and SWR. The frequency range is 140 to 150MHz / 430 to 450MHz. The connector is MJ. It is small and lightweight, making it convenient to carry. *For more details, please feel free to contact our company.*

• Other network tools

● The AP-76M (AP76M) is a wireless access point manufactured by Icom. ● It is a lightweight wireless access point that complies with Wi-Fi 6 and achieves high-speed communication of 1.2Gbps. ● It has obtained technical compliance certification. ● Compliant with Wi-Fi 6 (IEEE802.11ax), it enables ultra-fast and stable data communication with a theoretical communication speed of 1.2Gbps. ● It supports the robust security standard WPA3 Personal. *Note: This is the conventional WPA2 standard. ● Beamforming/OFDMA features Equipped with beamforming technology that directs radio waves towards the direction of the device, ensuring stable communication. It also has OFDMA functionality, allowing simultaneous transmission to multiple devices rather than just one. This enables comfortable communication even with many devices connected at the same time. *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs

The SX240C (SX-240C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It has built-in sensors for 1.8–54MHz and 140–470MHz. It is a measuring instrument for radios. This cross-type power meter is designed with two sets of meters to read forward power, reflected power, and SWR at the intersection of both. It employs two sensors, allowing for a wide measurement range from HF to UHF bands. It features illumination for better visibility. The connector is MJ. *For more details, please feel free to contact us.*

• Other network tools

The SX40C (SX-40C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radios. The cross-type power meter is designed with two sets of meters to read forward power, reflected power, and SWR at the intersection of both. The frequency range is 144 to 470 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• Other network tools

The SX20C (SX-20C) is a cross-needle SWR power meter (cross-type power meter) manufactured by Daiwa (Diamond Antenna). It is a measuring instrument for radios. The cross-type power meter is designed with two sets of meters to measure forward power, reflected power, and to read SWR at the intersection of both. The frequency range is 3.5 to 30 MHz, 50 to 54 MHz, and 130 to 150 MHz. The connector is MJ. *For more details, please feel free to contact our company.*

• Other network tools

● The NX-20R (NX20R) is a specific low-power transceiver manufactured by F.R.C. Co., Ltd. It is part of the NEXTEC brand. ● It comes as an all-in-one package that includes a charger and battery, allowing you to use it immediately after purchase. ● By using the separately sold wireless repeater FC-R3, you can double the communication range (theoretical value). ● It has 38 channels, allowing for use in 38 group modes. ● The VOX (hands-free) function is available. ● It features a dual watch function that allows you to be on standby on two channels. If there is communication on either channel, you can talk on that channel. After the conversation ends, it will return to dual watch mode. ● It is a genuine product that complies with the technical standards set by the Ministry of Internal Affairs and Communications. ● It supports a full range of channels, including 20 channels for regular communication and 27 channels for relay communication. ● It can communicate with other manufacturers' specific low-power transceivers, including models with 9ch, 11ch, and 20ch. ● It can receive FM radio (76.0 to 90.0 MHz).

• Other safety equipment

● The NX-20BT (NX20BT) is a lithium-ion rechargeable battery manufactured by F.R.C Co., Ltd. ● It is a rechargeable battery for the specific low-power transceivers NX-20X / NX-20R / FC-S22 and the disaster radio NX-W109RD made by F.R.C. ● The battery capacity is 1000mAh. ● The battery is charged using the charger NX-20BC while installed in the transceiver, or with the connecting AC adapter FC-ZXPROLC and the connecting AC adapter FC-AC01. ● The battery life is approximately 24 hours when used with the NX-20X. * This is an estimated time based on using the fully charged battery with a low-frequency output rating of 400mW, transmitting for 10 seconds, receiving for 10 seconds, and waiting for 80 seconds in a repeating cycle. ● The charging time is approximately 3.5 hours. * For more details, please feel free to contact us.

• Other network tools

● The NX-20BC (NX20BC) is a charger manufactured by F.R.C Co., Ltd. ● It can charge the specific low-power transceivers NX-20X and NX-20R made by F.R.C. ● It comes with two terminals for connecting to the transceiver body. ● It can charge two units simultaneously. ● It can be charged from a household power supply of AC100V. ● The charging time is approximately 3.5 hours. *For more details, please feel free to contact our company.*

• Other network tools

The FC-ZXPROLC (FCZXPROLC) is a connection charging cable manufactured by F.R.C. Co., Ltd. By combining it with the separately sold connection AC adapter FC-AC01, you can simultaneously charge up to four specific low-power transceivers made by F.R.C., including the NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203. It is a 4-way micro USB charging cable with a length of approximately 1.2 meters.

• Other network tools

●EDC-197A (EDC197A) is a standard charger set manufactured by Alinco. ●It charges Alinco receivers DJ-X82 and DJ-X81. ●It is a standard accessory for the DJ-X81 main unit. ●The AC adapter EDC-139 is included. ●It charges from a household power supply of AC100V. ●The charging time is approximately 10 hours to fully charge the dedicated nickel-metal hydride battery EBP-179. *For more details, please feel free to contact us.*

• Other network tools

● K515 (K-515) is a roof rail dedicated base (mid-size base) manufactured by Daiwa (Diamond) with a variable mounting width. ● It is an antenna base used for mounting the antenna of a vehicle-mounted radio on the car's roof rail. It can be installed on various car roof rails. ● Please use it in combination with separately sold antenna elements. ● Compatible pipe diameter is Φ8 to Φ32mm. ● It is compatible with rails that are 50mm or less in height and 48mm or less in width. ● It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

• Other network tools

●ESC-68 (ESC68) is a soft case made by Alinco. ●It is a soft case specifically designed for the communication receiver (receiver) DJ-X82 with a keypad. ●It protects the receiver from scratches and dirt. *For more details, please feel free to contact our company.*

• Other network tools

The DJ-X82 (DJX82) is a communication receiver with a keypad manufactured by Alinco. It is an easy-to-use receiver for beginners, equipped with a keypad. The charging and external power terminal is USB TYPE-C, allowing for USB charging. It features "Quick Memory" and "Quick Search Pass" banks with 200 channels each. With simple operations using the dial, you can skip noise while searching and temporarily store found signals, making it easy to move them to the conventional bank. It includes a selectable sound & silent simple bug detection mode. A free editing software that allows memory registration and set mode configuration (available for download from the Alinco website) can be connected to a PC using the included USB cable for settings. It can receive AM/FM and FM broadcasts from 76-108 MHz on a separate circuit. You can register the conditions for program scanning by pairs, allowing you to search the same band with different steps and modes. *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

● The Aterm MR05LN is an LTE mobile router made by NEC. ● It is a mobile WiFi router that achieves a maximum download speed of 375 Mbps. ● The WAN supports LTE (LTE-Advanced), while the LAN can switch between 11ac/n/a (5GHz band) and 311n/g/b (2.4GHz band). ● The continuous communication time is approximately 14 hours (about 30 hours when using Bluetooth tethering). ● WAN specification: The maximum download speed for LTE (LTE-Advanced) is 375 Mbps as per device specifications. ● The wireless LAN specifications allow for switching between 867 Mbps on the 5GHz band and 300 Mbps on the 2.4GHz band. ● It can be used for communication with the Tanizawa remote support wearable camera U-BOX AT and the real-time information sharing system U-BOX WITH. Compatible wireless devices include ST#7704 and ST#7704 (DE200). ● When using Tanizawa products, there will be a monthly communication fee charged by Tanizawa as a SIM card usage fee: - 500GB: 5,500 yen (excluding tax) - 1TB per unit: 6,500 yen (excluding tax)

• Routers, Switches, and Hubs

The NX-20EH (NX20EH) is an ear-hook type earphone microphone manufactured by F.R.C Co., Ltd. It is an earphone microphone for the specific low-power transceivers NX-20X and NX-20R made by F.R.C. The earphone has an ear hook, so it won't fall out of your ear. *The ear hook is not detachable. You can transmit by pressing the PTT button located on the inline cord. The cord has a clip that rotates 360°, allowing it to be attached to clothing and other items. It is compatible with the VOX (voice activation) function. *For more details, please feel free to contact our company.

• Other network tools

●FC-AC01 (FCAC01) is a coupling AC adapter manufactured by F.R.C Co., Ltd. ●It is an AC adapter for USB charging. ●Please use it in combination with the separately sold coupling charging cable FC-ZXPROLC. ●It can charge up to four specific low-power transceivers from F.R.C: NX-20X, NX-20R, NT-202M, FC-ZXPRO, and FC-B203 simultaneously. ●It is powered by a household AC supply of 100V.

• Other safety equipment

●PMLN7107 (PMLN7107A) is a 6-unit multi-charger manufactured by Motorola. ●It can charge up to 6 Motorola WAVE PTX IP radios TLK100 at once. ●The lithium-ion battery pack PMNN4578 can also be charged individually. ●It comes with an AC adapter. ●It charges from a household power supply of AC100V. ●It supports rapid charging. *For more details, please feel free to contact us.*

• Other network tools

The K540 (K-540) is a carrier pipe base (foldable) manufactured by Daiwa (Diamond). It is an antenna base used for mounting antennas on vehicle side mirror pipes, carrier pipes, and railings of apartments or housing complexes. The compatible pipe diameter is Φ15 to Φ25mm. Please use it in combination with separately sold antenna elements. It is designed to match the Super Gainer series, but can also be combined with other antennas. Angle adjustment is possible. It complies with the European environmental regulation RoHS directive. *For more details, please feel free to contact us.

• Other network tools

●OPC-478UD (OPC478UD) is a programming cable made by ICOM. ●If you need a USB driver, please download it from the ICOM website. ●It is used to configure the radio equipment with a computer. ●It can be used with IP transceivers IP502H, IP501H, IP500H, IP510H, and wireless LAN transceivers IP100H/IP100FS/IP1000C. ●It is a successor to OPC-478UC-1.

• Other network tools

The NX-20BL (NX20BL) is a belt clip manufactured by F.R.C. It is a belt clip for the specific low-power transceivers NX-20X and NX-20R. The transceiver can be attached to a belt or similar. It is a standard accessory for the NX-20X and NX-20R. It can be purchased as a spare or replacement. It attaches to the back of the transceiver by sliding it on, and no screws or other tools are required for installation. *For more details, please feel free to contact us.*

• Other network tools

The NX-20X (NX20X) is a specific low-power transceiver manufactured by F.R.C Co., Ltd. It is part of the NEXTEC brand. It comes as a set of two specific low-power transceivers. You can choose from two colors: Black NX-20XBK and Wine Red NX-20XWR. It includes a charger, lithium-ion battery, and earphone microphone, and can be used without a license or qualification, allowing you to use it from the day you purchase it. It can communicate with specific low-power transceivers from other manufacturers (excluding group and secret conversations). It features a hands-free (VOX) function. The speaker has a low-frequency output of 0.4W, providing loud volume and clear sound even in noisy environments. It can be used in 20 channels and 38 group modes for differentiation. With a thickness of approximately 19mm and a weight of about 100g, it is compact and lightweight. It has a squelch setting. It includes a simple secret conversation function. It can receive FM radio (76.0 to 90.0 MHz). It has a key lock function. It comes with a stopwatch. It complies with the technical standards set by the Ministry of Internal Affairs and Communications.

• Other safety equipment

● BC39 (BC-39) is a belt clip made by Hytera. ● It is a belt clip for the HP708 portable radio used for onboard communication, compliant with the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. ● It is a standard accessory for the HP708 body and can be purchased as a spare or replacement. ● The radio can be secured to a belt or similar. ● It slides onto the back of the radio and does not require screws or other fasteners. *For more details, please feel free to contact us.*

• Other network tools

● U-BOX AT (UBOXAT) is a remote support wearable device manufactured by Tanizawa (TANIZAWA) that connects the worksite and the office. It features a hands-free helmet-mounted camera and voice communication, allowing real-time streaming of the worksite situation to a remote administrator terminal. ● Anyone can use it easily. The worker just needs to turn on the U-BOX AT unit and the mobile router, while the administrator only needs to enter a specified URL along with a unique username and password. ● It can be used hands-free. ● There are four models available: 1. Web Conference Model 2. Dedicated Cloud Model 3. LAN Model 4. LW Model ● It is suitable for construction site management, support for new employees, site management, assistance for high-altitude work or solo operations in the power industry, maintenance and troubleshooting in manufacturing, and railway track maintenance and vehicle upkeep. ● It consists of a hands-free helmet-mounted camera and a compact communication device that fits in a chest pocket. ● By simply pressing the power button, it automatically connects and starts image streaming, eliminating the need for any operation during work. ● The streamed images can be recorded and saved, with recording operations available from both the worker's side and the viewer's side.

• Other safety equipment
• Other network tools
• Surveillance Camera System

● The GC550 is a 2K mini body camera manufactured by Hytera. ● It can record high-definition video, audio, and images at 2K resolution. ● This camera can record objective evidence from the scene to the courtroom. ● It is IP67 dustproof and waterproof, so rain is not a concern. ● It has a drop resistance of 1.5m and is sturdy. ● With a long-lasting battery, it can be used continuously for about 9 hours at a resolution of 720p. ● Even after the battery is completely drained, it provides an additional 5 minutes of backup power, allowing for battery replacement during recording. ● There are three charging methods: - Charge from a household power supply AC100V using the included Type-C USB cable and AC adapter. - USB charging with the included Type-C USB cable. - Charge from a household power supply AC100V using the separately sold charger EDS31 (10 pockets). ● Recorded data can be transferred to a computer using the included Type-C USB cable. It does not have communication functions. ● It features intuitive slide switches, making operation easy. *For more details, please feel free to contact us.*

• Surveillance Cameras

The 3DA-450 (3DA450) is a collinear antenna with a reflective element manufactured by Nippon Antenna, designed for the 400MHz band. * A collinear antenna is a high-gain antenna used primarily for radio communication, often utilized in the VHF to UHF frequency range. * This antenna is intended for fixed station radios. * The frequency is a specified frequency within the 330-470MHz (UHF band). Please specify fo (center frequency) MHz when placing your order. * The model number varies depending on the operating frequency. - For the 364-450MHz band: 3DA-450 F=364-450 specified - For the 450-470MHz band: 3DA-450 F=450-470 specified * It features a dipole antenna stacked on a stainless steel mast, providing high gain and durability. * It comes with a lightning rod. * This antenna has a cardioid radiation pattern. * The cardioid radiation pattern means that the shape of the directional diagram resembles a heart shape (cardioid), with the strongest signal directed forward. * The gain is 7.15dBi. * The antenna length is approximately 3.79m. * For more details, please feel free to contact our company.

• Other network tools

● The EDS-44 (EDS44) is a PTT switch cover made by Alinco. ● It is designed for specific low-power transceivers DJ-P422B-TM / DJ-P422B-TL and DJ-P421LA / DJ-P421MA made by Alinco. ● It is fixed to the separately sold belt clip EBC-70 with the included two screws. ● When attached to the radio, you can transmit by lightly pressing the cover, which acts like a lid. It is wider and larger than the PTT key, allowing for intuitive operation of the radio attached to your belt, and can also be used as a PTT for Bluetooth microphones. *For more details, please feel free to contact us.*

• Other network tools

●EBC-70 (EBC70) is a belt clip made by Alinco. ●It is a belt clip that can be attached to specific low-power transceivers such as the Alinco DJ-P422B-TM / DJ-P422B-TL and DJ-P421LA / DJ-P421MA, which are part of the DJ-P421 series. ●It is a standard accessory for the DJ-P422B-TM, DJ-P422B-TL, DJ-P421LA, and DJ-P421M. It can be purchased as a spare or for repair purposes. ●It allows the specific low-power transceiver to be attached to a belt, accommodating belt widths of up to 4 cm. ●The transceiver can be mounted using one of the included screws. ●There are two screw holes on the side of the belt clip for attaching the PTT switch cover EDS-44. The screws for the PTT switch cover are included with the EDS-44. *For more details, please feel free to contact us.*

• Other network tools

●BM-GSRM3.5LC (BMGSRM35LC) is a 3.5mm LC earhook earphone made by B-EAR. ●It can be used with B-EAR's wireless guide systems BRIDGECOM GS-X5 (BM-GSX5), BRIDGECOM GS-T (BM-GST), BM-GSR, and BRIDGECOM LT-S (BM-LTS). ●The cable length is approximately 45.5 cm. ●The plug size is φ3.5mm. ●It has an earhook, so it won't fall out of your ear. *For more details, please feel free to contact us.

• Other network tools

●CAW5580E (CAW-5580-E) is an e-bridge connection cable made by Wave CSR. ●It is a cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This connection cable is used to connect the GX5580UCB to the smart wave telecommunications e-bridge adapter CET1378FA-S for communication with IP radios and digital MCA radios.

• Other network tools

The HP708 (Manufacturer Model Number: HP708 Uv) is a portable radio for onboard communication manufactured by Hytera. It is an explosion-proof type that meets the US explosion-proof standard UL 913 and the Canadian explosion-proof standard CSA 22.2. It can be used in locations where flammable and explosive atmospheres may exist, such as tankers or car carriers transporting LPG (liquefied petroleum gas), LNG (liquefied natural gas), and crude oil. It is also ideal for operation on tugboats. Its robustness is rated IP68, providing the highest level of dust and water resistance, capable of being submerged in 2 meters of water for 4 hours. It has obtained the US military standard MIL-STD (810G), ensuring top-class durability, and can withstand a drop from 2 meters onto concrete. The battery life is up to 25 hours, based on an estimated usage of transmit 5: receive 5: standby 90. The output can be switched between High at 2W and Low at 0.1W. With improved reception sensitivity and optimized transmission circuits, the communication range has increased by approximately 10% compared to conventional models. For more details, please feel free to contact us.

• Other network tools

●CAW5580 (CAW-5580) is an RS-232C connection cable made by wave CSR (formerly Lecuo STANDARD). ●It is a data communication cable for the standard vehicle-mounted digital simple radio license station (3B/3C/3D) GX5580UCB. ●This cable is used to connect the radio to a computer or similar device. The connector on the PC side is compatible with RS-232C. ●To connect to the radio's circuit board, installation by the manufacturer is recommended. Additional installation costs will apply. *While customers can install it themselves, the manufacturer advises that installation by them is preferred to avoid causing damage. ●The cable length from the radio is approximately 40 cm.

• Other network tools

●EDC-323 (EDC323) is an AC adapter manufactured by Alinco. ●It is an AC adapter for the DK-SF03 series, including the Sensor FOX Mizumoni 2 DK-SF03WT2 and the Sensor FOX Location Management System DK-SF03G, as well as for the power management and monitoring system XE1151. ●It is powered by an AC 100V source. ●When using the AC adapter, it will no longer be dustproof or splashproof. If used outdoors, please protect it with a plastic waterproof case. Metal cases cannot be used as they block radio waves.

• Other safety equipment

The RYK-MB3220W (RYKMB3220W) is a communication-type drive recorder manufactured by Mmobility Co., Ltd. It is a communication-type drive recorder that can be connected to the Mobile Create in-vehicle IP radio terminal IM-870. Communication to the server for the RYK-MB3220W is done via the IM-870, which helps reduce communication costs. This communication-type drive recorder can simultaneously record high-quality images of the front of the vehicle and the interior. It can also acquire GPS location information. It sends real-time video of the vehicle's location information and any dangerous driving or abnormal occurrences to the server. It integrates with the Mmobility operation management service DSMART, allowing emergency notifications to be sent to the operation manager from DRSMART. It is equipped with two cameras and can simultaneously record images at a standard size of 1280x720. It features night vision camera functionality. By setting the interior camera to zoom in, it is possible to check the following vehicles. It can record audio from inside the vehicle simultaneously with the images. It also sends event detection (dangerous driving alerts) and dynamic management data.

• Other safety equipment

●ADBSF03G (ADBSF-03G) is a fixed bracket made by Alinco. ●It is used to mount the Sensor FOX location management system DK-SF03G to the wall. ●The main unit of DK-SF03G should be oriented upwards and attached to the wall using the included screws (black M3×12). *Note: A Phillips screwdriver is required for screw installation.

• Other safety equipment

The DK-SF03G (DK-SF03) is a location management system called Sensor FOX manufactured by Alinco. It is an ideal GPS monitoring system for managing the location and quantity of vehicles and equipment within a large area. You can confirm the positions of sensors, vehicles, and equipment on-site. The DK-SF03G is a location tracker that does not require real-time tracing. It captures location information through GNSS surveying. The geofence function can detect changes in a "designated area." It operates on two AA alkaline batteries. It can also be powered using the separately sold AC adapter EDC-323 with an AC100V power source. When using the AC adapter, it is no longer dustproof or splash-proof. If installed outdoors, please protect it with a resin waterproof case, as metal cases cannot be used because they block signals. It can be charged via the USB connector with the separately sold DC cable UA0105. It can also be charged from the car's DC12V/24V cigarette lighter power source using the cigarette DC/DC converter EDH-33. Additionally, it can be fixed to a wall using the separately sold mounting bracket ADBSF03G.

• Other safety equipment

●PMNN4807 (PMNN-4807) is an IMPRES lithium-ion battery manufactured by Motorola. ●It is a Li-Ion rechargeable battery for the digital/analog general-purpose radio MOTOTRBO R7. ●The battery capacity is 2200mAh. ●The battery life when used with the MOTOTRBO R7 is as follows: - 20 hours in the VHF band (output 4W), 15 hours (output 1W) - 19 hours in the UHF band (output 5W), 14.5 hours (output 1W) ●It is IP68 dustproof and waterproof. ●A separately sold belt clip can be attached. *For more details, please feel free to contact us.

• Other network tools

● XE1151 (XE-1151) is a power management and monitoring system for equipment manufactured by Alinco. ● It can be utilized for power management and monitoring of equipment. ● XE1151 can notify changes in the status of AC power outages and live power via Sigfox. It can continuously monitor power supply and outages. ● XE1151 can detect the opening and closing of doors and windows and send this information via Sigfox to notify about their status. ● XE1151 can send alerts for temperature controllers via Sigfox to inform about temperature anomalies. ● XE1151 can remotely notify about alarm bell ringing and rotating light activation via Sigfox.

• Other safety equipment

The DK-SF07 (DKSF07) is an inclination detection system manufactured by Alinco. The DK-SF07 is a system that detects inclination. The DK-SF07 consists of the following: - A terminal made up of a built-in inclination sensor and solar panel - An optional external water level sensor - Dedicated setup software It detects inclination and sends an email to the registered address. The email also includes the voltage of the main power supply and backup battery. Additionally, when the battery is running low, it warns that "The battery level is decreasing. If the power generation from the solar panel decreases, operation may become unstable." After turning on the main power, it will notify via email at specified intervals that "Regular transmission has been performed" if there are no abnormalities. It is an eco-terminal equipped with a solar panel. You can install any number of terminals. If it detects inclination or changes in water level that exceed pre-set settings, it will send email notifications to up to five email addresses.

• Other safety equipment

The DK-SF100 (DKSF100) is a heat stroke warning system manufactured by Alinco. The DK-SF100 is a device that detects the heat index. Based on the detected WBGT value of the heat index, it will notify you via email of the specified registered content. You can check the heat index from the app even when you are at a distance. You can receive notification emails regularly. *WBGT stands for Wet Bulb Globe Temperature, which is a heat index. It is an indicator that focuses on the heat exchange (thermal balance) between the human body and the outside air, incorporating three significant factors that affect the body's thermal balance: 1. Humidity, 2. Solar radiation and surrounding thermal environment, and 3. Temperature. This index was proposed in the United States in 1954 with the aim of preventing heat stroke. The unit is expressed in degrees Celsius (°C), the same as temperature, but its value differs from that of temperature. You can view temperature and humidity as graph data. Measurement data can be visualized using a web application. It can be used simply by installation without the need for wiring. Communication is done using Sigfox. It is suitable for factories, event venues, sports fields, and more.

• Other safety equipment

The BONX BOOST Light Pack is a Bluetooth headset (earphone microphone) made by BONX. The manufacturer model number is BX4-MBBK2. This product requires a subscription to the BONX WORK (paid plan). The light package includes ear hangers (3 sizes for left and right), ear caps (4 sizes), and a charging cable (Type-A). It is a headset for a business-oriented simultaneous call IP radio application. It pairs with a smartphone that has the BONX app installed, connecting via Bluetooth for hands-free simultaneous calls. The continuous talk time when using the BONX app is up to 10 hours, with a standby time of over approximately 500 hours, designed for long-term operation. Weighing 10g, it is compact and lightweight. It can be worn on either ear. With an IPX56 rating for dust and water resistance, it also features shock resistance, making it robust enough to withstand various environments.

• Other network tools

The BONX BOOST Full Pack is a Bluetooth headset (earphone microphone) manufactured by BONX. The model number is BX4-MBBK3. This product requires a subscription to the BONX WORK (paid plan). The full package includes a charging case, ear hangers (3 sizes for left and right), ear hooks (2 sizes), windscreen foam, ear caps (4 sizes), a neck strap, an expansion microphone, and a charging cable (Type-C to A). It is a headset designed for business use with simultaneous call IP radio applications. It can be paired with a smartphone that has the BONX app installed, allowing for hands-free simultaneous calls via Bluetooth. The continuous call time when using the BONX app is up to 10 hours, with a standby time aimed at over 500 hours. It is designed for long-term operation. Weighing 10g, it is compact and lightweight. It can be worn on either ear. It has an IPX56 rating for dust and water resistance, as well as shock resistance, making it robust enough to withstand various environments.

• Other network tools