エクセリ List of Products and Services

● The CPATU is a dedicated element for outdoor automatic tuners (ATU) manufactured by Daiichi Denpa Kogyo (DIAMOND) for the 3.5 to 50 MHz band. ● It is a dedicated element compatible with outdoor tuners from various manufacturers such as AH-4, AH-705, AH-730, FC-40, FC-800, CG-3000, MFJ, etc. ● It also supports the 10/18/24 MHz bands, including WARC, in the 3.5 to 50 MHz range. *Note that the frequency may vary depending on the specifications of the connected tuner. ● The element has a structure that makes it easy to set up since it does not spread out radially. *For more details, please feel free to contact us.

• Other network tools

The SL-935P (set) is a magnet-mounted collinear antenna (3D-2V) for vehicles, manufactured by Nippon Antenna, designed for 800/900MHz. * A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the VHF to UHF frequency range. This is a vehicle-mounted antenna for MCA radio, compatible with MCA advanced frequencies (850-945MHz). It is an omnidirectional antenna. It is a whip antenna of a 1/2λ two-stage collinear type. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. The antenna length is approximately 79cm. It is mounted on the car's rooftop using a magnet. This is a set product consisting of the following three items: - Vehicle-mounted 800/900MHz collinear element (MP type) SL-935P - Vehicle-mounted magnet base (element mount MJ) (3D-2V) MG-BA3-MJ-2 - Connector N・P-TA * For more details, please feel free to contact us.

• Other network tools

The 4SL-060 (4SL060) is a 60MHz band 4-element sleeve antenna manufactured by Nippon Antenna. * A sleeve antenna is a broadband 1/4 wavelength linear antenna that is used in an upright position. * It is an antenna for fixed station radios. * It is a unidirectional antenna that transmits and receives radio waves from one direction. * It operates at a specified frequency within the 54–75MHz range. Please specify the center frequency (fo/MHz) when placing your order. * To enhance the gain and directivity of the sleeve antenna, it is equipped with a reflector and a waveguide, making it a vertically polarized directional antenna used for fixed stations. * The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable characteristics. * A waterproof sleeve is included, providing complete waterproofing for the feeding part (connector part). * The connector is NJ. * The compatible antenna mounting bracket is B-8-1(B), and for a mounting diameter of 48.6φ, it is B-8-1(A). * For more details, please feel free to contact us.

• Other network tools

The SL-060 (SL060) is a sleeve-type antenna manufactured by Nippon Antenna, designed for the 60MHz band. * A sleeve antenna is a broadband linear antenna that is 1/4 wavelength long and is used in an upright position. * It is an antenna for fixed station radios. * It operates at a specified frequency within the range of 54 to 75MHz. Please specify the center frequency (fo/MHz) when placing your order. * It is an omnidirectional antenna. * It consists of a 1/4 wavelength radiating element and a 1/4 wavelength sleeve (blocking tube), forming a coaxial vertical dipole. * Its shape occupies a small space and allows for easy installation. * The connector is NJ. * The compatible antenna mounting bracket is B-8-2(A), and the mounting diameter of 48.6φ is F-23(E). * For more details, please feel free to contact us.

• Other network tools

The SL-930P (SL930P) is a vehicle-mounted sleeve-type element (MP type) manufactured by Nippon Antenna for 800/900MHz. * A sleeve antenna refers to a broadband 1/4 wavelength linear antenna that is used in an upward position. * It is an omnidirectional antenna. * It is a 1/2λ sleeve-type antenna. * The antenna length is approximately 46.5 cm. * It is a vehicle-mounted antenna for MCA radio, compatible with MCA advance frequencies (850–945MHz). * Please connect it with the separately sold M-J type base and connector. * For more details, please feel free to contact us.

• Other network tools

The 3SL-060 (3SL060) is a 60MHz band 3-element sleeve antenna manufactured by Nippon Antenna. * A sleeve antenna is a broadband 1/4 wavelength linear antenna used in an upright position, characterized by its non-directionality, allowing it to receive and transmit signals from any angle without directional focus. * It is an antenna designed for fixed station radios. * It operates at a specified frequency within the 54-75MHz range. Please specify the center frequency (fo/MHz) when placing your order. * This sleeve antenna is equipped with reflectors and waveguides to enhance gain and directivity, making it a vertically polarized directional antenna used for fixed stations. * The sleeve completely prevents radio wave leakage to masts and other structures, ensuring stable characteristics. * A waterproof tube is included, providing complete waterproofing for the feeding part (connector area). * The connector is NJ. * For more details, please feel free to contact us.

• Other network tools

The F-1 (round) - KC (set) is a mounting bracket for F-type antennas manufactured by Nippon Antenna. It is primarily used for mounting 3-element Yagi antennas in the 60 MHz band. It is installed in an arm shape. The compatible arm diameter for the antenna is φ25 to φ38. The adjustable band diameter range is φ230 to φ320, and the upper mast diameter range is φ230 to φ300. *For more details, please feel free to contact our company.

• Other network tools

● F-1 (Round) - K2A (Set) is an F-type antenna mounting bracket made by Nippon Antenna. ● This bracket is mainly used for mounting a 5-element Yagi antenna in the 60 MHz band. ● It is mounted in an arm shape. ● The compatible arm diameter for the antenna is φ25 to φ38. ● The adjustable band compatible diameter range is φ120 to φ190, and the upper mast diameter range is φ120 to φ170. *For more details, please feel free to contact our company.*

• Other network tools

●PSK-32F (PSK32F) is a mounting bracket for antennas made by Nippon Antenna. ●It is used for mounting BS and CS antennas on walls or flat surfaces. ●It is compatible with BS and CS antennas with a diameter of 50 cm or less. ●The compatible mast diameter is 32 mm. ●The mast is made of stainless steel. ●The main body is color-coated in ivory. *For more details, please feel free to contact our company.*

• Other network tools

The F-1 (round) - K2E (set) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is primarily used for mounting a 5-element Yagi antenna in the 60 MHz band. It is installed in an arm type. The compatible arm diameter for the antenna is φ25 to φ38. The compatible diameter range is φ76 to φ100. *For more details, please feel free to contact our company.

• Other network tools

● HG-4001B (HG4001B) is a vertical multi-stage antenna (wideband) manufactured by Nippon Antenna for the 400MHz band. ● It is a vertical polarization omnidirectional antenna with a multi-stage pole stacking design. ● This antenna is intended for fixed station radios. ● Since it is a specified frequency within 330-470MHz, please specify fo (center frequency/MHz) when placing your order. ● A 5D-2V feed cable approximately 60cm long is included. ● The terminal shape is N-J type. ● The antenna mounting bracket compatible with it is F-20(B). *For more details, please feel free to contact our company.

• Other network tools

The HG-40010 (HG40100) is a 400MHz band collinear antenna manufactured by Nippon Antenna. *Collinear antennas are high-gain antennas used for radio communication, primarily utilized in the VHF to UHF frequency ranges. *It operates at a specified frequency within the 360-470MHz range. The model number changes depending on the operating frequency. Please specify the fo (center frequency/MHz) when placing your order. - Specified frequency within 373-400MHz: HG-40010 373-400 City - Specified frequency within 400-470MHz: HG-40010 400-470 City *This antenna has a high gain of 10.15dB with multiple stages of radiating elements. *The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. *It is DC shorted to prevent damage to the radio equipment from induced lightning. *Its lightweight design makes installation at high locations easy. *The connector is NJ, and the feeding cable is RG-8/U approximately 60cm long. *The antenna mounting bracket is compatible with B-3-2. *For more details, please feel free to contact us.

• Other network tools

● The GX5580UCB is a standard model 3B/3C/3D vehicle-mounted digital simple radio license station. ● It is compatible with other manufacturers' digital simple radio license stations if the UC matches (some functions such as individual communication and secret communication may not be available). ● It supports the new wave 75 channels, allowing for stable communication with minimal interference. ● It supports relay 10 channels (10 transmission waves + 10 reception waves), making it easy to expand coverage in dead zones. The relay channels require simultaneous licensing procedures with the relay device. ● It is equipped with a secret communication function. ● It has an emergency mode that allows for emergency notifications (emergency alarms) in case of emergencies. ● It supports individual communication, group communication, and broadcast communication. ● The following functions are available during individual communication: - Missed call memory function - Answer-back function - Standard message sending function ● The display features a highly visible OLED (organic EL) full-width 6-character kanji display. ● It supports DC12V and DC24V, allowing it to be used directly in most vehicles without the need for a DC/DC converter. ● The radio unit has a high heat dissipation aluminum die-cast chassis, enabling stable communication even in high-temperature environments inside vehicles.

• Other network tools

The F-25 (F25) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for mounting antennas on poles/masts. It accommodates mast diameters ranging from φ120 to φ410 and antenna mounting section diameters from φ25 to φ32. The model number varies depending on the compatible mast diameter and antenna mounting section diameter. *For more details, please feel free to contact our company.*

• Other network tools

The F-23W (F23W) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for mounting antennas on poles/masts. It accommodates mast diameters ranging from φ120 to φ400 and antenna mounting section diameters from φ43 to φ65. The model number varies depending on the compatible mast diameter and antenna mounting section diameter. *For more details, please feel free to contact our company.*

• Other network tools

The F-23 (F23) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ120 to φ400 and antenna mounting section diameters from φ43 to φ65. The model number varies depending on the compatible mast diameter and antenna mounting section diameter. *For more details, please feel free to contact our company.*

• Other network tools

The FA-S80U (FAS80U) is an antenna made by Icom. It can be used with Icom's UHF band digital simple radio licensed stations, simple business radios, and general business portable radios. The compatible frequency is in the UHF 467 MHz band. The antenna length is approximately 5 cm. It is attached to the radio via a screw-in method. *For more details, please feel free to contact our company.

• Other network tools

The F-20 (F20) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for attaching antennas to poles/masts. It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. The model number changes according to the corresponding mast diameter and antenna mounting section diameter: - Mast diameter range φ100 to φ120, antenna mounting section diameter φ22 to φ32: F-20(A) - Mast diameter range φ120 to φ190, antenna mounting section diameter φ22 to φ32: F-20(B) - Mast diameter range φ170 to φ260, antenna mounting section diameter φ22 to φ32: F-20(C) - Mast diameter range φ230 to φ320, antenna mounting section diameter φ22 to φ32: F-20(D) - Mast diameter range φ300 to φ410, antenna mounting section diameter φ22 to φ32: F-20(E) For more details, please feel free to contact us.

• Other network tools

●F-20W (F20W) is an F-type antenna mounting bracket manufactured by Nippon Antenna. ●It is a bracket for mounting antennas on poles/masts. ●It accommodates mast diameters ranging from φ100 to φ410 and antenna mounting section diameters from φ22 to φ32. ●The model number changes according to the corresponding mast diameter and antenna mounting section diameter. ・Mast diameter range φ120 to φ190, antenna mounting section diameter φ22 to φ32: F-20W(B) ・Mast diameter range φ170 to φ260, antenna mounting section diameter φ22 to φ32: F-20W(C) ・Mast diameter range φ230 to φ320, antenna mounting section diameter φ22 to φ32: F-20W(D) ・Mast diameter range φ300 to φ410, antenna mounting section diameter φ22 to φ32: F-20W(E) *For more details, please feel free to contact our company.

• Other network tools

The HG-1500 is a collinear antenna manufactured by Japan Antenna for the 150MHz band. *Collinear antennas are high-gain antennas used for radio communication, primarily in the VHF to UHF range.* This antenna is for fixed station radios. It operates on specified frequencies within 145 to 170MHz, with the model number changing according to the frequency. - 144MHz to 149MHz: HG-1500 F=144-149 - 154MHz: HG-1500 F=154 - 149MHz to 166MHz: HG-1500 F=149-166 When placing an order, please specify the frequency (fo/center frequency) in MHz that you will be using. It is a high-gain antenna with multiple radiating elements. The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. It is DC shorted to prevent damage to the radio equipment from induced lightning. It is lightweight, making installation at high locations easy. The connector is equipped with an NJ type. The antenna mounting bracket is compatible with F-21(B). *For more details, please feel free to contact us.*

• Other network tools

The HGK-2501B1 (HGK2501B1) is a collinear antenna with a reflective element manufactured by Nippon Antenna, designed for the 260 MHz band. * A collinear antenna is a high-gain antenna used primarily for radio communication, commonly employed in the VHF to UHF frequency range. * It is a directional antenna for fixed station radios operating in the frequency range of 260 MHz to 275 MHz. * By using a reflective element with a three-stage collinear antenna, it achieves directional characteristics. * This product is adjusted to have a front-to-back ratio of 20 dB at 180°. * It comes with an NJ connector, and the feed cable is 8D-2V, approximately 80 cm long. * The compatible mounting brackets are B-3-1 and B-8-2(B). * For more details, please feel free to contact our company.

• Other network tools

The HG-2501B (HG2501B) is a 260MHz band collinear antenna manufactured by Nippon Antenna. *Collinear antennas are high-gain antennas used for radio communication, primarily in the VHF to UHF frequency range.* This antenna is designed for fixed station radios operating in the frequency range of 260MHz to 275MHz. It is a vertically polarized omnidirectional antenna with a multi-stage pole stacking design. The radiating elements are completely sealed with a fiberglass cover due to special processing, making them robust and highly waterproof. It is shorted DC-wise to prevent damage to the radio equipment from induced lightning. The connector is an NJ type, and the feed cable is 8D-2V, approximately 80cm long. The antenna mounting bracket is compatible with A-1. *For more details, please feel free to contact us.*

• Other network tools

The HG-2502CD (HG2502CD) is a collinear antenna manufactured by Nippon Antenna, designed for the 260MHz band. *Collinear antennas are high-gain antennas used primarily for radio communication, commonly employed in the VHF to UHF range.* This antenna is intended for fixed station radio equipment operating in the frequency range of 260MHz to 275MHz. It is a vertically polarized omnidirectional antenna with a multi-stage pole stacking design. The radiating elements are completely sealed and robust, featuring a fiberglass cover due to special processing, which provides excellent waterproofing. It comes with an NJ connector, and the feed cable is RG-8/U, approximately 80cm long. The antenna mounting bracket compatible with this model is B-3-2. *For more details, please feel free to contact our company.*

• Other network tools

The HG-4000 (HG4000) is a 400MHz band collinear antenna manufactured by Nippon Antenna. * A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the VHF to UHF frequency range. * It is an antenna for fixed station radios operating in the frequency range of 360MHz to 470MHz. * Since it is a specified frequency within 360 to 470MHz, please specify the fo (center frequency/MHz) when placing your order. * It is a high-gain antenna with a gain of 3.65dBi, featuring multiple stages of radiating elements. * The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. * It is DC shorted to prevent damage to the radio equipment from induced lightning. * Its lightweight design makes it easy to install at high locations. * It comes with an NJ connector, and the feed cable is RG-8/U approximately 60cm long. * The antenna mounting bracket compatible with it is F-20(D). * For more details, please feel free to contact us.

• Other network tools

The F-21 (F-21) is an F-type antenna mounting bracket manufactured by Nippon Antenna. It is a bracket for mounting antennas on poles/masts. It accommodates mast diameters ranging from φ120 to φ410 and antenna mounting section diameters from φ22 to φ32. The product varies depending on the compatible mast diameter and antenna mounting section diameter. - For mast diameter range φ120 to φ190 and antenna mounting section diameter φ22 to φ32: F-21(B) - For mast diameter range φ170 to φ260 and antenna mounting section diameter φ22 to φ32: F-21(C) - For mast diameter range φ230 to φ320 and antenna mounting section diameter φ22 to φ32: F-21(D) - For mast diameter range φ300 to φ410 and antenna mounting section diameter φ22 to φ32: F-21(E) For more details, please feel free to contact us.

• Other network tools

● The DJ-P421A is a Bluetooth-compatible specific low-power transceiver manufactured by Alinco. ● There are two models available: the middle antenna DJ-P421MA and the long antenna DJ-P421LA. ● It is compatible with Alinco's separately sold Bluetooth accessories such as EME-80BMA, EMS-87B, and EMS-87BNC. ● It supports a total of 47 channels, including relay channels. ● With an IP67 equivalent rating, it has strong dust and water resistance, making it safe to use in rain and dusty environments. ● In addition to Alinco's specific low-power transceivers, it features an ACSH function that allows easy channel and group settings for transceivers from other manufacturers, enabling simple communication even in busy business settings with many users. ● It can be equipped with optional PTT accessories such as the PTT switch cover EDS-44, commercially available Bluetooth transmit buttons (stick) EDS-45, and commercially available Bluetooth transmit buttons (finger roll) EDS-46, enhancing operability depending on the usage environment. ● The manufacturer's warranty period is one year. *For more details, please refer to the PDF document or feel free to contact us.*

• Other network tools

● The DJ-P422B-T is a Bluetooth-compatible specific low-power transceiver manufactured by Alinco. ● There are two types: the middle antenna DJ-P422B-TM and the long antenna DJ-P422B-TL. ● The DJ-P422B-T has the following features added to the DJ-P421A. Everything else is the same. - Up to four optional wireless linking repeaters, DJ-P113R and DJ-P116R, can be installed to extend the communication range mainly in a straight direction, enabling wide-area communication. - It is equipped with a call vibration function that alerts you to incoming calls through vibrations. - It features an air clone mode that allows easy copying of various settings between DJ-P422B-T units. ● It is compatible with optional Alinco Bluetooth accessories such as EME-80BMA, EMS-87B, and EMS-87BNC. ● It supports a total of 47 channels, including relay channels. ● With an IP67 equivalent strong dustproof and waterproof design, it can be used safely in rain and dusty conditions. ● The estimated charging time for the nickel-metal hydride battery EBP-179 is about 6 hours. ● The manufacturer's free warranty period is 1 year. * For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The 3CL-150 is a 150MHz band lightning rod-equipped three-stage collinear antenna manufactured by Nippon Antenna. * A collinear antenna is a high-gain antenna used for radio communication, commonly employed in the VHF to UHF range. * It is an antenna for VHF fixed station radios. * It operates within the specified frequency range of 140 to 170MHz. Please specify the center frequency (fo) in MHz when placing your order. * This is a vertical polarization high-gain antenna with dipole antennas arranged at 120° intervals around a steel pole or vertically above it. * A dipole antenna is an antenna that is half the wavelength (1/2λ) in length. It refers to an antenna that can transmit and receive radio waves in all horizontal directions when installed vertically. * The connector on the antenna side is an N-J type. * The antenna side connector is only N-J. It can be converted to other connectors using an extension coaxial cable. * This is an omnidirectional antenna with a lightning rod. * An omnidirectional antenna refers to an antenna that can transmit and receive radio waves from all directions. * The antenna mounting brackets compatible with this product are B-4 and B-8-1(D). * For more details, please feel free to contact our company.

• Other network tools

● The IC-DPR45 is a digital simple radio registration station manufactured by Icom. ● It supports 97 channels (including 15 channels for airborne reception) with new wave compatibility. ● With an output of 5W, it covers a wide range. ● It features a sub-channel PTT function that allows you to select your communication partner with one touch, enabling instant switching between contacts. ● The built-in speaker delivers a class-leading loud volume of 1500mW, making it easy to hear even in noisy or windy conditions (depending on the level). ● It is Bluetooth compatible, allowing for wireless connection with Bluetooth headsets, earphone microphones, and speaker microphones, eliminating cable clutter. ● The battery life is approximately 16.5 hours with power save on and about 13.5 hours with power save off. ● It can also be used with five AA alkaline batteries using the BP-312 battery case. ● It has a powerful IP67 dustproof and waterproof performance. ● It supports all-call, group call, and individual call functions. ● The antenna connector on the radio side is SMA-J. ● It comes with a 3-year manufacturer's warranty. *For more details, please refer to the PDF document or feel free to contact us.*

• Other network tools

The 6DA-450 is a directional six-stage collinear antenna with a lightning rod manufactured by Nippon Antenna for the 400 MHz band. It is an antenna for fixed station radios. The frequency is a specified frequency within the range of 330-470 MHz (UHF band). Please specify the center frequency (fo) in MHz when placing your order. It features a stacked dipole antenna on a stainless steel mast, providing high gain and durability. It is equipped with a lightning rod. This antenna has a cardioid radiation pattern, which means that the shape of the directional diagram resembles a heart (cardioid), with the strongest radiation in the front direction. The gain is 11.15 dBi. The antenna length is approximately 5.77 m. It weighs 35 kg. The antenna side connector is an N-J type. Note that the antenna side connector is only N-J; it can be converted to other connectors using an extension coaxial cable. An 80 cm coaxial 8D-2V cable extends from the antenna. The antenna mounting brackets B-4-1 and B-8-1(C) are compatible. For more details, please feel free to contact us.

• Other network tools

The S4FBAL5FW (S4FBAL5-FW) is a cable for individual receivers manufactured by Nippon Antenna. It is used to connect the indoor antenna DP-0613 to the individual receiver. It is equivalent to S-4C-FB, has a length of 5 meters, and is white in color. One side has an F4 connector pre-processed, while the other side is unprocessed. *For more details, please feel free to contact our company.*

• Other network tools

● WFDI-TCC3BA (WFDITCC3BA) is a case for the WFDI-TC3(A) made by TB-eye. ● It is a dedicated case for the Clear Talk Cam's digital transceiver (Wi-Fi intercom) subunit WFDI-TC3A. ● This is a protective case that guards the subunit against shocks and dirt. ● It features a magnetic design for easy attachment. ● It has a buckle on the back, making it easy to attach to a belt, compatible with belt widths up to 5 cm. ● The material is synthetic leather, and the color is black. *For more details, please feel free to contact our company.*

• Other network tools

The 3SBD-4502 (3SBD4502) is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 400 MHz band. *The Yagi antenna is a type of antenna that consists of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This is an antenna for radio equipment. *It is a 3-element Yagi antenna that can share two frequencies within the 330-470 MHz range with a frequency spacing of less than 48 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The connector is NJ. *The compatible mounting brackets for the antenna are C-31(B) and C-19(B). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, feel free to contact us.

• Other network tools

●FC-ZXPROBL (FCZXPROBL) is a belt clip manufactured by F.R.C. Co., Ltd. ●It is the belt clip included in the standard configuration of the F.R.C. specific low-power transceiver FC-ZXPRO. ●It can also be used with the standard specific low-power transceiver FTH-214. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

●The DJ-DPS72W is a digital simple radio registration station 3R/3T (DCR) compatible with app radios made by Alinco. ●It supports 97 channels of new waves, including the UHF 351MHz band digital simple radio registration station (5W or 2W output), and allows communication as an IP radio using the app radio Air-InCom.Lite. ●By pairing with your smartphone, you can operate both the app radio and the digital simple radio registration station. ●There are three ways to transmit: 1. Transmit as a digital simple radio registration station (communication distance is about several kilometers) 2. Transmit as an app radio call using Air-InCom.Lite (anywhere in Japan) 3. Simultaneous transmission of both the digital simple radio registration station and the radio call Air-InCom.Lite ●In addition to the secret codes compatible with other companies, a unique secret key from Alinco is added to achieve high-security encryption. ●Communication is possible through group calls, individual calls, and all-call. ●The transmission output can be switched between 5W, 2W, and 1W. ●The radio connector is SMA-J. ●The manufacturer offers a free warranty period of one year. *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

●TH-TX-0308 (THTX0308) is a short antenna manufactured by F.R.C. ●It is an antenna that can be used with digital simple radio registered stations (new wave compatible digital 82ch + reception-only 15ch for aerial use) such as the FC-D301PLUS. ●Being a short antenna at 7.1 cm in length, it won't be bothersome even when the radio is attached to your waist. ●This is the standard antenna included with the FC-D301PLUS main unit. It can be purchased as a replacement or for repair purposes. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

The 5DV-0608 (5DV0608) is a 60MHz band 5-element Yagi antenna manufactured by Nippon Antenna. * The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, driven element, and reflector, which provides high directivity. It was invented in 1926. * This is a 5-element Yagi antenna suitable for both transmission and reception, designed for municipal disaster prevention administrative radio use. * It is a representative antenna of single directivity, mainly composed of an antenna, reflector element, and director element. * The appearance is simple, with the supply section and element blanket molded from reinforced resin. * It operates at a specified frequency within the range of 54 to 75MHz. The model number varies depending on the frequency band. - 5DV-0608 68.2-69.8MHz - 5DV-0608 55-66MHz When placing an order, please specify the center frequency (fo) in MHz. * The connector is NJ. * The compatible antenna mounting bracket is F-1 (round)-K2 (D). For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, feel free to contact our company.

• Other network tools

The 5BD-930(26MSMA-P) set is a 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 5-element Yagi antenna (without cover) 5BD-930 and the connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26. Please be sure to connect the included cable 5D2V-NP-SMAP-26 for use. This is a 5-element Yagi antenna primarily used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Accessories include: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (26m) 5D2V-NP-SMAP-26 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

• Other network tools

● The MG-BA5-09(7M) is a magnet-type base station for mobile units manufactured by Nippon Antenna. ● It is an antenna base for vehicle-mounted radios. ● It can be used by combining it with separately sold antenna elements and installing the base on the vehicle's rooftop or similar locations using the included strong magnet. ● The antenna part of the base has a screw-type connector. The antenna element can be attached by turning it clockwise. ● Please use it in combination with separately sold capacity installation type 3/4λ whip antennas HMG-450-1-09EL, HMG-450-3B-09, vehicle-mounted antenna element EL480 for the 148-157 MHz band, and vehicle-mounted element EL458 for the 150 MHz band. ● The radio connection side has an attachment connector, and you can choose from the following connectors according to the radio used: - M-P connector M・P-TA2 - N-P connector N・P-TA - BNC-P connector BNC・P-TA - TNC-P connector TNC・P-TA For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

● TBE-SIP-C4 (TBESIPC4) is a compact SIP server manufactured by TB-eye. ● It supports up to 20 transceiver subunits and 3 consoles. ● It can connect up to 23 devices, including 20 transceiver subunits from the digital wireless intercom system ClearTalk Cam 10 and ClearTalk Cam 20, and 3 SIP phones (consoles). ● It is possible to select up to 4 groups. ● It allows simultaneous calls without time restrictions for continuous communication. ● It is compatible with smartphone applications. ● Guidance will be provided in Japanese voice during group connections. ● It can also be linked with nurse call systems, so please inquire once. ● The manufacturer's warranty period is one year from the date of purchase. ● This is the successor to the TB-eye SIP server compact TBE-SIP-C3. ● Accessories: - AC adapter - Power cord - VESA bracket - Screws for VESA bracket ×6EA - Instruction manual *For more details, please feel free to contact us.

• Other network tools

The 5BD-930A (24MSMA-P) set is a cover-equipped 5-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. This is a set product that includes the wideband 5-element Yagi antenna (with cover) 5BD-930A and the connection cable for MCA Advance (24m) 5D2V-NP-SMAP-24. *Please be sure to connect the included cable 5D2V-NP-SMAP-24 when using. This is a 5-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The antenna body is completely covered by a resin cover, making it waterproof and excellent in weather resistance. It has a lightweight design, making installation easy. This antenna is a wideband Yagi antenna with a single directional pattern, featuring radiating elements, reflecting elements, and guiding elements, providing high gain and sharp directivity. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

● The FC-D301 PLUS is a new wave compatible UHF digital simple radio registered station manufactured by F.R.C Co., Ltd. ● The supported channels increase by 52 channels for the new wave, in addition to the existing 30 channels of digital simple radio. Furthermore, the upper channel count increases from 5 channels to 10 channels compatible with the new wave, totaling 15 channels. *The upper channels are for receiving only. ● As it is a radio with type codes 3R/3T, it can communicate with digital simple radio registered stations from other manufacturers (excluding Alinco models DJ-DP50H and DJ-DP10). ● It is an all-in-one package product that includes necessary accessories such as a charger, battery, and belt clip. ● With an IP67 rating for dust and water resistance, it can be safely used in rain and dusty environments. ● It features a secret communication function with 32,767 combinations. ● It allows for the setting of 511 different user codes (UC). ● It has a call channel function, enabling individual communication if individual IDs are set. ● The antenna connector on the radio side is SMA-J. ● The manufacturer's warranty period is one year. ● Environment: RoHS compliant. *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

●AMP-060-95FN (set) is a booster for individual receivers made by Nippon Antenna. ●It helps improve stable reception and reduces building shielding loss for individual receivers. ●The booster unit has a compact design that considers indoor aesthetics. ●The power unit can be mounted on the wall using the included wall-mount bracket. ●The power unit lights up like an emergency light during a power outage. ●In addition to the AC100V power supply, it can operate for 72 hours during a power outage using three AA alkaline batteries, providing peace of mind in emergencies. ●It complies with the European environmental regulation RoHS directive. ●Included accessories: AC adapter, connection cables (4C2m x 2), LP-P connector, wall-mount bracket. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

The 3BD-930 (18MSMA-P) set is a 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a set product that includes the wideband 3-element Yagi antenna (without cover) 3BD-930 and the connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18. Please be sure to connect the included cable 5D2V-NP-SMAP-18 for use. This is a 3-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal part of the feeding section is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (18m) 5D2V-NP-SMAP-18 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

• Other network tools

The 8BD-930(33MSMA-P) set is an 8-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. It is a wideband 8-element Yagi antenna (without cover) 8BD-930 and a connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33. Please be sure to connect and use the included cable 5D2V-NP-SMAP-33. This is an 8-element Yagi antenna mainly used for transmission and reception with MCA Advance. It supports frequencies from 850MHz to 945MHz. The internal feeding part is completely sealed and waterproof. This antenna is a single-directional Yagi antenna with wideband radiating elements, reflecting elements, and guiding elements, offering high gain and sharp directivity. Included accessories: - Feeding cable (30cm) ×1 - Connection cable for MCA Advance (33m) 5D2V-NP-SMAP-33 ×1. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact our company.

• Other network tools