エクセリ List of Products and Services

● The IJKP BTH-102 (IJKPBTH102) is a Bluetooth PTT headset manufactured by Icom. ● It is a headset-type earphone microphone that can be used in combination with Icom's Bluetooth-enabled satellite communication transceiver systems, IP radios, WLAN transceivers, digital simple radios, specific low-power transceivers, and more. ● Complying with Bluetooth V5.0 standards, it not only increases communication speed but also improves call quality. ● By briefly pressing the PTT button (the upper part) on the Bluetooth PTT Headset IJKP BTH-102, you can switch between transmission and reception. * Please remember to press the PTT button after finishing your conversation. If you forget to press it, you will remain in transmission mode, so please be careful. ● You can make calls wirelessly and hands-free, preventing accidents caused by cable snags or tangles, and allowing you to talk without using your hands. ● It is IP55 waterproof. ● The estimated battery life is about 10 hours with typical usage. * For more details, please feel free to contact us.

• Other network tools

The 3BD-930A(15MSMA-P) set is a cover-equipped 3-element MCA Advance SMAP type antenna manufactured by Nippon Antenna. This is a set product that includes the wideband 3-element Yagi antenna (with cover) 3BD-930A and the connection cable for MCA Advance (15m) 5D2V-NP-SMAP-15. *Please be sure to connect and use the included cable 5D2V-NP-SMAP-15. This is a 3-element Yagi antenna primarily used for transmission and reception with MCA Advance. *The Yagi antenna consists of three rods of different lengths forming a single antenna, with the shorter rod serving as a director, the middle rod as a radiator, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. It supports frequencies from 850MHz to 945MHz. The antenna body is completely covered by a resin cover, providing excellent weather resistance. The interior of the feeding part is completely sealed and waterproof. It has a lightweight design, making installation easy. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

● The DM-404 (DM404) is a switching type DC stabilized power supply manufactured by Alinco. ● The output voltage is fixed at 13.8V, with a continuous maximum output power of 4.3A, and it has one set of military terminals for DC stabilized power supply. ● It is suitable for use as a power supply for base stations of simple radios and small radios. It is used when operating a DC12V radio with a household power supply of AC100V. ● The size is 35mm in height, 85mm in width, and 140mm in depth, with a weight of 0.5kg, making it quite compact and lightweight for a stabilized power supply. ● It complies with PSE standards for consumer use. * PSE (Product Safety Electrical Appliance and Materials) refers to the Electrical Appliance and Material Safety Law, which is a Japanese law that establishes safety standards for the manufacturing and sale of electrical products. If a product meets the standards, it can display the PSE mark. ■ Standard accessories: AC cable (approximately 1.8m long), instruction manual, warranty, one each. * As of February 26, 2024, there are no plans for the manufacturer to sell the AC cable separately.

• Other network tools

The 5D2V-NP-SMAP-26 (5D2VNPSMAP26) is a 26m connection cable for MCA Advance manufactured by Nippon Antenna. It is an extension cable for MCA Advance and digital MCA radios. The coaxial cable is 5D2V in size, with a length of 26m, and has an N-P type connector on one end and an SMA-P type connector on the other end. It connects a radio to a wideband 5-element Yagi antenna (without cover) 5BD-930. Please note that when using outdoors, the connector parts should be waterproofed with tape or similar methods. *For more details, please feel free to contact us.

• Other network tools

The 5D2V-NP-SMAP-24 (5D2VNPSMAP24) is a 24m connection cable for MCA Advance manufactured by Nippon Antenna. It is an extension cable for MCA Advance and digital MCA radios. The coaxial cable is 5D2V in type, with a length of 24m, and has an N-P connector on one side and an SMA-P connector on the other side. It connects a radio to a wideband 5-element Yagi antenna (with cover) 5BD-930A. Please note that when using outdoors, the connector parts should be waterproofed with tape or similar methods. *For more details, please feel free to contact us.

• Other network tools

The 5D2V-NP-SMAP-18 (5D2VNPSMAP18) is a 18m connection cable for MCA Advance manufactured by Nippon Antenna. It is an extension cable for MCA Advance and digital MCA radios. The coaxial cable is 5D2V in type, with a length of 18m, featuring an N-P connector on one end and an SMA-P connector on the other end. It extends the connection between the radio and the wideband 3-element Yagi antenna (without cover) 3BD-930. Please note that when used outdoors, the connector parts should be waterproofed with tape or similar methods. *For more details, please feel free to contact our company.

• Other network tools

The 5D2V-NP-SMAP-36 (5D2VNPSMAP36) is a 36m connection cable for the MCA Advance manufactured by Nippon Antenna. It is an extension cable for the MCA Advance and digital MCA radios. The coaxial cable is 5D2V in type, with a length of 36m, and has an N-P connector on one side and an SMA-P connector on the other side. It connects the radio to a wideband 12-element Yagi antenna (without cover) 12BD-930. It is also an accessory for the MCA Advance SMAP type 12-element 12BD-930 (36MSMA-P) set. Please note that when using outdoors, the connector part should be waterproofed with tape or similar methods. For more details, please feel free to contact us.

• Other network tools

The 5BD-930A is a cover-equipped wideband 5-element Yagi antenna manufactured by Japan Antenna. *The Yagi antenna is a type of antenna consisting of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the radiating element, and the reflector, making it a highly directional antenna. It was invented in 1926. *The supported frequency range is 850MHz to 940MHz. This antenna is compatible with the new frequency band of MCA after the MCA frequency transition. *The antenna part is fully covered, making it resistant to rain and wind, and it has excellent weather resistance. *As this is a directional antenna that only receives radio waves from a specific direction, please install it according to the direction of the incoming radio waves. *It has a high gain of 10.15dBi. *Please use it in combination with the separately sold MCA Advance connection cable (24m) 5D2V-NP-SMAP-24. *Note: When using outdoors, please waterproof the connector part with tape or similar methods. *The terminal shape is N-J type. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

The 8BD-2502 (8BD2502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. * The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. * This is a wideband 8-element Yagi antenna for fixed stations in municipal digital mobile communication systems. * The supported frequency range is 260 to 275 MHz. * When ordering, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). * The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. * The feeding part is highly waterproof, ensuring stable performance. * The recommended antenna mounting hardware is F-1 (round)-KD (set), suitable for arm diameters of φ25 to φ38, adjustable band diameter range of φ300 to φ410, and upper mast diameter range of φ300 to φ389. * It comes with an NJ connector, which can be connected if the radio side connector is NP. For affordable sales of earphone microphones, batteries, and more, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

The 5BD-2502 (5BD2502) is a wideband 5-element Yagi antenna manufactured by Nippon Antenna, designed for the 260 MHz band. *The Yagi antenna consists of three rods of different lengths that form a single antenna, with the shorter rod serving as a director, the middle rod as a driven element, and the longest rod as a reflector, resulting in a highly directional antenna. It was invented in 1926. *This is a wideband 5-element Yagi antenna for fixed stations in municipal digital mobile communication systems. *The operating frequency range is 260 to 275 MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *The arms, elements, and brackets are made of stainless steel, providing excellent weather resistance and strength. *The feed point is highly waterproof, ensuring stable performance. *The recommended antenna mounting bracket is C-30. *It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

The 3BD-2502 F=260-275 is a wideband 3-element Yagi antenna manufactured by Nippon Antenna for the 260 MHz band. *The Yagi antenna is a type of antenna made up of three rods of different lengths, functioning as a director, radiator, and reflector, which provides high directivity. It was invented in 1926. *This is a wideband 3-element Yagi antenna for fixed stations in municipal digital mobile communication systems. *The supported frequency range is 260 to 275 MHz. *It is used for sharing multiple frequencies with a single antenna. *The feeding part is highly waterproof and provides stable performance. *The recommended antenna mounting bracket is C-14. *It comes with an NJ connector, which can be connected if the connector on the radio side is NP. For extremely low-priced sales of earphone microphones, batteries, and more, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools

The 8BD-1502 (8BD1502) is a wideband 8-element Yagi antenna manufactured by Nippon Antenna for the 150MHz band. *The Yagi antenna is a type of antenna consisting of three rods of different lengths, functioning as a director, driven element, and reflector, providing high directivity. It was invented in 1926. *This antenna is for fixed station radio equipment in the VHF band. *The compatible frequency range is from 140MHz to 170MHz. *When placing an order, please specify ft (transmission frequency, MHz) and fr (reception frequency, MHz). *It is used for sharing multiple frequencies with a single antenna. *The external matching type designed for weight reduction is a unique design by our company. *It offers stable workability and electrical performance. *When selecting antenna mounting brackets, please refer to the recommended bracket list below. *When selecting antenna mounting brackets, please choose the antenna mounting bracket F-1 (round)-K2C (set). *The connector is NJ. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact our company.

• Other network tools

●EZ0041 (EZ-0041) is a twist cable earphone made by Alinco. ●It is the earphone included with the IPX4 splash-proof, over-ear type business specification earphone microphone EME-914MA. It can also be used with other earphone microphones such as EME-29A and EME-48A. ●With an over-ear design and large ear caps, it is structured to minimize ear pain even during long hours of use. ●The cable length is 50 cm. ●The plug size is φ2.5 mm. ●It features a durable twist cable. Twist cables are commonly used by professional users in broadcasting and public safety sectors. ●It can be purchased as a replacement part. *For more details, please feel free to contact us.

• Other network tools

● The SSM-BT20 is a Bluetooth earphone microphone made by Yaesu Musen. ● It complies with the latest Bluetooth 5.0 standard, significantly expanding data transmission speed, communication range, and capacity compared to the previous model, SSM-BT10, which used Bluetooth 4.1. ● It can be used in combination with Yaesu Musen's digital simple radio and specific low-power transceivers equipped with Bluetooth functionality. ● Each short press of the PTT button (on the upper part) of the SSM-BT20 Bluetooth earphone microphone switches between transmission and reception. * Please remember to press the PTT button after finishing your conversation. If you forget to press it, you will remain in transmission mode. ● When using the convenient VOX function on the radio unit, it automatically enters transmission mode when you start speaking and automatically switches to reception mode when you finish speaking. ● You can make calls without cables and hands-free, preventing accidents caused by cable snags or tangles, and allowing you to talk without using your hands. ● It can be easily charged with the included Type-C USB cable. * For more details, please feel free to contact us.

• Other network tools

The EME-914MA (EME914MA) is a splash-proof, ear-hook type professional headset microphone made by Alinco (ALINCO) with an IPX4 rating. It can be used with various Alinco 4-pole screw-type plug radios. This is a professional-grade headset microphone. The microphone part is water-resistant for everyday use with an IPX4 rating, which helps prevent water ingress from the switch area. The headset features an ear-hook design with large ear caps, making it less likely to cause ear pain even during prolonged use, and the cable is a durable twisted cord. The headset connection connector is φ2.5mm. The microphone comes with a windscreen to reduce wind noise. There is a rotating clip on the back of the microphone part that allows it to be attached to the chest. The PTT has a locking function. There is no microphone gain switch. Individual parts can also be purchased: - Twisted cable headset: EZ0041 - Ear pads (black): 5-piece set AD012 / 20-piece set AD013 - Microphone windscreen (with windscreen and plastic parts for fixing): FG0898 For more details, please feel free to contact our company.

• Other network tools

● The FC-R3 is a relay device for specific low-power transceivers manufactured by FRC Corporation. ● It has relay functionality for specific low-power transceivers, theoretically doubling the communication area. ● It is a recommended relay device when using the B-EAR BRIDGECOM R2 Field Receiver with the transmitter set to the specific low-power transceiver FC-ZXPRO. ● It uses a half-duplex method with two frequencies: a receiving frequency of 421 MHz and a transmitting frequency of 440 MHz. ● It supports 18 business channels (1ch to 18ch) and 9 leisure channels (19ch to 27ch), for a total of 27 channels. ● It has a 38-group mode. ● SQL (squelch) sensitivity can be set to five levels. ● The settings and control of the relay device can be done using the included infrared remote control. ● It has a strong waterproof rating of IPX7. ● It features a robust body case made of aluminum die-cast. ● It operates on household power AC100V using the included AC adapter FC-R3AC. ● It has an all-reset function that allows all settings to be returned to the initial factory state with simple operation. *For more details, please refer to the PDF document or feel free to contact us.*

• Other network tools

● The FC-ZXPRO (FCZXPRO) is a specific low-power transceiver manufactured by F.R.C Corporation. ● It is suitable as a transmitter for the B-EAR sports-specific receiver, the BRIDGECOM R2 Field Receiver, because it does not produce a buzzing sound during transmission. ● It is compatible with the FC-R3 wireless repeater, allowing for an expanded communication area. ● It comes as an all-in-one package with a rechargeable battery and charger, ready to use from the day of purchase. ● It features a hands-free VOX function. ● It has a second talk function that allows for standby on two channels: main and sub. ● It can be set to 38 different groups. ● It includes a selectable scrambler function with six types of secret codes. ● It has an auto power-off function that turns off the device after a certain period. ● It features a talk beep function. ● It includes a squelch function. ● It has a key lock function. ● It has a key tone ON/OFF feature. ● There is a one-year manufacturer warranty for natural defects at no charge. ● It has an IP65 rating for dust and water resistance. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety equipment

The VP-2100 (VP2100) is a desktop IP phone manufactured by ICOM. It is an IP multifunction phone that allows one-touch group calls to IP/WLAN transceivers using the PTT button. Essentially, it can be used as a business phone, equipped with sufficient features for making and receiving external and internal calls, as well as transferring and holding calls. A major feature is the PTT button on the VP-2100, which enables one-touch group calls (simultaneous calls) and reception to telelink series IP radios (LTE network) and WLAN transceivers, allowing for seamless conversation. It can be used like an internal phone. *It requires connection to the separately sold VoIP router SR-8000V and PoE HUB VE-SW8, with prior setup needed. *In usage scenarios, when a call comes in, you can put the call on hold, press the "PTT button" located at the bottom right to call out to those who can respond via simultaneous group call, and then seamlessly take over the conversation. It is equipped with four soft keys that can display functions on the screen and 24 programmable keys with indicator lights for status display, making it easy to see if a call is in progress or on hold at a glance.

• PBX/IP phone

●IP200APP is an IP phone application made by Icom. ●IP200APP is a smartphone application for businesses that is compatible with iOS and Android devices. It cannot be contracted for personal use. ●The usage area is nationwide in Japan, as long as you are within the mobile phone network area or in a WiFi environment. You can use the internal phone even when you are not in the office. ●It has features equivalent to a business phone and IP transceiver. ●You can make internal calls, external calls, and group notifications from the smartphone app. ●As an optional service, it can be linked with the positioning monitor software PM-IP500. Using the location information of the smartphone, the location of the person holding the device can be displayed on the administrator's PC or tablet. ●There are two ways to obtain IP200APP: 1. For iPhone users, it can be downloaded from the App Store, and for Android users, it can be downloaded from Google Play. Please search for the app using "IP200APP." 2. You can also scan the QR code in the image to install it. *For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools

●EME-68B (EME68B) is an ear-hook type twist cable earphone made by Alinco. ●It is an ear-hook type earphone that can be used with Alinco's specific low-power transceivers such as DJ-PX5, DJ-PX7, DJ-PX10, and DJ-RX31. ●With an ear hook and large ear caps, it has a structure that makes it less likely to cause ear pain even during long periods of use. ●The cable length is 50 cm. *While it can be used with radios like the DJ-RX31 that are attached to the waist with a belt clip, the manufacturer does not recommend it due to the short length. ●The plug size is φ3.5mm. ●It features a durable twist cable. Twist cables are commonly used by professional users in broadcasting and public safety-related fields. *For more details, please feel free to contact us.

• Other network tools

● The SRM420U / SRM420U/R is a new wave compatible 3B/3C/3D digital simple radio license station manufactured by Yaesu Musen. ● The differences between the SRM420U and SRM420U/R are as follows: - The SRM420U does not support relay (3D) 20 channels (10 pairs) and is a 75-channel digital simple radio license station (3B/3C). - The SRM420U/R supports relay (3D) 20 channels (10 pairs) and is a 95-channel digital simple radio license station (3B/3C/3D). * There are no changes in functions or performance other than the number of channels. ● With excellent basic performance and ease of use, it is ideal for hard work environments such as construction sites and manufacturing factories. ● It is a digital portable radio equipped with digital frequencies of the ARIB type code "3B/3C/3D" in the 465-467 MHz band, compatible with license stations that have the same type code, allowing for communication. ● It is equipped with Bluetooth functionality. ● Both the built-in speaker and the included microphone speaker have a high output of 2W, allowing for clear communication even in noisy environments. * For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

● The SR820U / SR820U/R is a new wave-compatible digital simple radio station licensed by Yaesu Musen, supporting 3B/3C/3D. ● The differences between the SR820U and SR820U/R are as follows: - The SR820U does not support relay (3D) 20 channels (10 pairs) and is a 75-channel digital simple radio station (3B/3C). - The SR820U/R supports relay (3D) 20 channels (10 pairs) and is a 95-channel digital simple radio station (3B/3C/3D). * There are no changes in functions or performance other than the number of channels. ● With excellent basic performance and ease of use, it is ideal for hard operations in construction sites and manufacturing factories. ● It is a portable radio equipped with digital frequencies compliant with the ARIB type codes "3B/3C/3D" in the 465-467 MHz band, and it is compatible with radios that have the same type code, allowing for communication. ● It is equipped with Bluetooth functionality. ● The built-in speaker has a large volume of 800mW and high sound quality, and with the synergy of the noise-canceling function, it allows for clear audio even in noisy environments. * For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

The SR810UA / SR810UA/R is a new wave-compatible 3B/3C/3D digital simple radio license station manufactured by Yaesu Musen. The differences between the SR810UA and SR810UA/R are as follows: - The SR810UA does not have GPS functionality, increases the existing digital simple radio license station (3B) from 65 channels to 75 channels by adding 10 channels for the new wave-compatible digital simple radio registered station (3C). Note: It does not include relay (3D) 20 channels (10 pairs). - The SR810UA/R does not have GPS functionality, increases the existing digital simple radio license station (3B) from 65 channels to 95 channels by adding 10 channels for the new wave-compatible digital simple radio registered station (3) and 20 channels (10 pairs) for relay (3D). Note: There are no changes to functions or performance other than for the new wave. ● With excellent basic performance and ease of use, it is ideal for hard tasks in construction sites and manufacturing plants. ● The built-in speaker provides a loud volume of 800mW and high sound quality, allowing clear audio to be heard even in noisy environments due to the synergy with the noise cancellation feature. ● It allows for calling by selecting all, group, or individual. *For more details, please refer to the PDF document or feel free to contact us.*

• Other network tools

●UX1735 (UX-1735) is a USB cable made by Alinco. ●It is the same product as the standard configuration item for the specific low-power compact multi-repeater DJ-P116R. It can be purchased as a replacement part. ●The cable length is 30 cm. ●The connectors are USB Type-A male and female. ●Please use it in combination with the USB adapter EDC-339. *For more details, please feel free to contact us.

• Other network tools

●EDC-339 (EDC339) is a USB adapter made by Alinco. ●It is the AC adapter for the standard configuration of the specific low-power compact multi-repeater DJ-P116R. ●Connect the DJ-P116R to the EDC-339 to operate it with an AC 100V power supply. *You can connect the DJ-P116R directly to the EDC-339 (USB Type-A), or you can use the USB cable UX1735 in between. *For more details, please feel free to contact us.

• Other network tools

● The DJ-P116R is a compact multi-repeater for specific low-power use manufactured by Alinco. ● It supports 27 relay channels and up to 4 wireless connected relays in alternating (half-duplex) relay mode. Since wired connections are not required, flexible installation is possible. *Compatible relay devices (as of January 29, 2024): DJ-P240 compatible lot, DJ-PX7, DJ-PHM20, DJ-P322, DJ-P113R, DR-PM300SE mode) ● It has become smaller than conventional repeaters, increasing installation flexibility. Additionally, its compact size allows it to be placed discreetly without disrupting the atmosphere of the store. ● Equipped with a high-performance noise cancellation feature that reduces environmental sounds (background noise) picked up by the radio, enabling clearer conversations than before. ● Settings can be configured using dedicated software or the remote control mode of compatible subunits. Configuration is possible even in environments without a PC. ● It adopts a foldable and rotating high-performance 1/4λ antenna. ● Designed for indoor installation. ● Installation can be done using a household power supply of AC100V. Even during connected relay operation, the current consumption is low, approximately 220mA for about two low-power transceivers. *For more details, please feel free to contact us.

• Other network tools

● The DMCA (10KST) is a microphone switcher made by EKO TECHNO (Eco Techno) that allows switching between a keypad speaker microphone and an ST-01 stand microphone. ● It is used when you want to connect two microphones to an MCA Advance/Digital MCA wireless radio. ● The DMCA (10KST) is a set product that includes an adapter (with cable) and one ST-01 stand microphone. The wireless radio, keypad speaker microphone, and stabilized power supply are sold separately. ● It is used in a configuration that switches between the keypad speaker microphone and the ST-01 stand microphone. ● The ST-01 stand microphone is switched using a PTT switch. At this time, the microphone on the keypad speaker microphone side is muted. ● Since the line does not disconnect, it is possible to interrupt the conversation. ● There are also microphone switchers available, such as the DMCA (10K2) for switching between two keypad speaker microphones and the DMCA (ST2) for switching between two ST-01 stand microphones. *For more details, please feel free to contact us.*

• Other network tools

● The DMCA(ST2) is a microphone switcher made by Ecotech, allowing for the switching between two ST-01 stand microphones. ● It is used when you want to connect two microphones to the MCA Advance/Digital MCA wireless radio. ● This is a set product that includes the DMCA(ST2) adapter (with cable) and two ST-01 stand microphones. The radio and stabilized power supply are sold separately. ● You can use the microphone that has the PTT switch pressed. ● Previously, the included stand microphone was the UEM-300, but as of January 24, 2024, it is now the ST-01. *For more details, please feel free to contact us.*

• Other network tools

The BRIDGECOM R2 Field Receiver is a specific low-power dual-channel radio receiver manufactured by B-EAR. The manufacturer model number is BM-R2FR. It is a radio receiver capable of receiving calls from specific low-power transceivers operating in the 421MHz, 422MHz, and 440MHz bands, allowing you to hear the sender's voice. This dual-band type can simultaneously receive two channels and supports up to 47 channels. The mounting method can be selected according to the situation, such as on the wrist, upper arm, or back. It features a compact and lightweight design with a shock-resistant structure that is strong against drops and impacts. It is also IP54 rated for everyday water and dust resistance, ensuring reliability even on rainy days. With a speaker output of 1.5W, it allows for smooth communication with the sender. The dial-type channel selection makes operation easy. This product is for receiving only and cannot transmit. There are no communication fees or other charges. *For more details, please refer to the PDF document or feel free to contact us.*

• Other network tools

● The WX-PS200 is a portable wireless amplifier made by Panasonic. ● It is a portable wireless amplifier for a 1.9GHz digital wireless microphone system. ● It provides high sound quality with stable communication that is resistant to radio interference and crosstalk. ● Equipped with a standard 3-channel tuner unit, it can use up to three wireless microphones. ● It can play audio sources from an SD card. Frequently used items like radio calisthenics and school songs can be easily played back if recorded on an SD card. ● It supports Bluetooth, allowing connection to smartphones, tablets, etc. via Bluetooth. ● It is battery-operated, enabling continuous use for about 5 hours (using 10 AA alkaline batteries). ● With a powerful output of 60W, it produces a loud sound. It also supports dual-unit mixing functionality (60W + 60W) for use in larger spaces. ● It is compatible with a Φ35mm pole mount, allowing it to be installed on speaker stands. *For more details, please feel free to contact us.*

• Other network tools

● The AD-152 is a power supply unit made by Icom. ● The manufacturer's model number is AD-152#13. ● It can supply power to Icom's hybrid IP transceivers IP700 PLUS, IP700, IP700S, IP700SV, IP700SU, IP700SV BT, and IP700SU BT from a household AC 100V source. ● It is an AC adapter that provides constant power supply, making it ideal for use in situations where the device is in standby mode for receiving. ● Please note that it cannot be used for charging. ● Please be aware that the power supply adapter and AC adapter cannot be removed. *For more details, please feel free to contact us.*

• Other network tools

The IC-DU6505BNPLUS is a new wave-compatible digital simple radio license station manufactured by Icom. The differences from the IC-DU6505BN are as follows: It increases the existing digital simple radio license station (3B) from 65 channels to 95 channels by adding 30 channels for the new wave digital simple radio registered station (3C/3D). *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with an interface for connecting to IP lines, allowing for the expansion of the communication range and operational forms of conventional digital radios. With an IP54 rating for splash and dust resistance, it can be safely used in environments with light rain or water splashes. It comes standard with HM-206#32 and includes a GPS unit, allowing for the acquisition of GPS data. It features a loudspeaker function that outputs microphone audio directly from an external speaker connected to the IC-DU6505BNPLUS, enabling it to be used as a loudspeaker. The antenna connector on the radio side is MJ. It comes with a one-year manufacturer's warranty. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

The IC-DU6505BPLUS is a new wave-compatible digital simple radio licensed station manufactured by Icom. The differences from the IC-DU6505B are as follows: It increases the existing digital simple radio licensed station (3B) from 65 channels to 95 channels by adding 30 channels for the new wave-compatible digital simple radio registered station (3C/3D). *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than the new wave. It is equipped with IP54 splash and dust resistance, allowing for safe use in environments with light rain or water splashes. It supports 511 types of user codes, enabling efficient communication with counterparts using the same code setting. It features a short message function, allowing for the transmission of both voice and text data. With 32,767 types of encryption keys, it reduces the risk of eavesdropping. It has a voice recording and playback function that can record received audio content, allowing for the storage of up to 30 recordings totaling 5 minutes. The antenna connector on the radio side is MJ. It comes with a 1-year manufacturer's warranty. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

The IC-DU75 PLUS is a new wave-compatible digital simple radio licensed station manufactured by Icom. The differences from the IC-DU75 are as follows: It increases the existing digital simple radio licensed station (3B) 65 channels by adding 30 channels for the new wave-compatible digital simple radio registered station (3C/3D), bringing the total to 95 channels. *The relay (3D) 20 channels are planned to be supported. *There are no changes to functions or performance other than for the new wave. It is equipped with a Bluetooth unit. It has GPS functionality that can be transmitted to the other station. It features a sub-channel PTT function that allows for sending and receiving across up to 3 channels without the need to switch channels. It has ruggedness that meets the U.S. Department of Defense procurement standards (MIL-STD-810G) tests. It has dust and water resistance ratings of IP67/66/55/54, making it safe to use in rain and sandy conditions. It is equipped with a loudspeaker of 800mW that is easy to hear even in noisy environments. The antenna connector on the radio side is SMA-J. The manufacturer offers a free warranty period of 3 years. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

●SBT-18 is a battery case made by Yaesu Musen. ●It can operate the Yaesu Musen specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L with three AA alkaline batteries. ●The operating time is approximately 14 hours. *For more details, please feel free to contact us.

• Other network tools

● The SBR-51L is a compact, high-capacity lithium-ion battery manufactured by Yaesu Musen. ● Below are the charging times: - For the set with the AC adapter SAD-52A or SAD-50A and the single pocket charger sleeve SBH-59 (can connect 10 units and charge 10 units simultaneously): approximately 3 hours - For the set with the AC adapter SAD-35A and the single pocket charger sleeve SBH-59 (cannot be connected): approximately 3 hours - For the set with the DC adapter SDD-20 with a cigarette plug and the single pocket charger sleeve SBH-59 (can connect 6 units and charge 6 units simultaneously): approximately 3 hours - For the set with the AC adapter SAD-52A or SAD-50A and the dual pocket charger SBH-46 (can connect 5 units and charge 10 units simultaneously): approximately 3 hours - For the set with the DC adapter SDD-20 with a cigarette plug and the dual pocket charger SBH-46 (can connect 3 units and charge 6 units simultaneously): approximately 3 hours - For the set with the charger sleeve USB Type-C terminal MCU-50, USB Type-C cable SCU-65, and a commercially available USB Type-C charger (1A or more) (cannot be connected): approximately 3 hours *For more details, please feel free to contact us.

• Other network tools

● The SCU-65 is a USB Type-C cable made by Yaesu Musen. ● It is used in combination with a commercially available USB Type-C charger (1A or more) and the separately sold charging sleeve USB Type-C terminal MCU-50. ● It can charge specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L in about 3 hours. ● The length of the cable is approximately 100 cm. ● The connectors are USB Type-C on both ends. *For more details, please feel free to contact us.*

• Other network tools

● The IP700 PLUS is a hybrid IP transceiver manufactured by Icom. ● The IP700 PLUS is compatible with the new wave. It increases the existing digital simple radio registered station (3R) from 30 channels to 82 channels by adding 52 channels for the new wave. The existing air channels increase from 5 channels to 15 channels by adding 10 channels for the new wave. *Note: Air channels are receive-only. The existing digital simple radio licensed station (3B) increases from 65 channels to 95 channels by adding 30 channels for the new wave (3C/3D). *Note: 20 channels for relay (3D) are planned to be supported. ● It has two functions: LTE communication via IP and direct communication via digital simple radio, allowing for communication even when out of mobile phone network coverage or during LTE line troubles. ● Normally, it switches between LTE mode for communication with IP radios and DCR mode for communication with digital simple radios. ● In LTE mode, simultaneous calls can be made without a limit on the number of participants. In DUAL mode, only alternating calls are possible. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

● The MCU-50 is a charging sleeve with a USB Type-C connector made by Yaesu Musen. ● It is used by connecting a separately sold USB Type-C cable SCU-65 and a commercially available USB Type-C charger (1A or more). ● It can charge one unit of the specific low-power transceivers SRFD51 / SRFD51-L, SRFD55 / SRFD55-L. ● The charging time is approximately 3 hours. ● It is equipped with an LED lamp that indicates the charging status. - Red light: Charging - Green light: Charging complete - Red blinking: Charging error ● Daisy chaining for charging is not possible. * For more details, please feel free to contact us.

• Other network tools

The IP50G (IP-50-G) is an IP gateway manufactured by Icom (ICOM). 【Main Features】 ■Embedded Platform The IP50G operates by writing applications developed and designed using the SDK, allowing for the construction of highly flexible systems tailored to user needs. ■Supports Routing Using 5G/LTE Connections It is compatible with various frequency bands of both 5G and LTE. ■IEEE802.11ax Compliant IP Gateway It enables communication at a theoretical maximum of 1.2Gbps in the 5GHz band and 574Mbps in the 2.4GHz band. ■Dustproof Unit Available for Attachment to the Main Unit By attaching the dedicated option MBZ-2 to the main unit, it can achieve IP5X dustproof performance, making it safe to use in dusty environments like factories. It can also be wall-mounted, and fixed to a mast (requires separate MB-89). ■Other Features - Dual SIM support (au/docomo). - Equipped with three programmable Function keys that can be set for each user. - Comes with dedicated mounting hardware for wall or ceiling installation.

• Other network tools

● The SDD-20 is a DC adapter with a cigarette plug made by Yaesu Musen. ● It can power Standard Horizon's specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L from a vehicle. ● The following usage options are available: - Connect 6 units of the 1-pocket charger sleeve SBH-59 to charge 6 radios simultaneously in about 3 hours. - Connect 3 units of the 2-pocket charger sleeve SBH-46 to charge 6 radios simultaneously in about 3 hours. *When the USB port is not in use. ● It is powered by DC 12V. *For more details, please feel free to contact us.

• Other network tools

●SAD-35A is an AC adapter made by Yaesu Musen. ●It is used in combination with the Standard Horizon single-pocket charger sleeve SBH-59. ●It can charge the radios SRFD51 / SRFD51-L and SRFD55 / SRFD55-L in about 3 hours. ●It is powered by a household AC100V power supply. ●Connection charging is not possible. *For more details, please feel free to contact us.*

• Other network tools

● The SBH-46 is a two-pocket charger sleeve made by Yaesu Musen. ● It is a connected charger for the Standard Horizon specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● It is used in combination with an AC adapter (for AC100V) SAD-52A / SAD-50A or a DC adapter with a cigarette plug (for DC12V) SDD-20, sold separately. * When the USB port is not in use ● Up to 5 units can be connected, allowing simultaneous charging of up to 10 radios. ● It is equipped with an LED lamp to check the charging status. - Red light: Charging - Green light: Charging complete - Red blinking: Charging error ● Charging times are as follows: - For lithium-ion battery SBR-42LI: Approximately 3 hours - For small high-capacity lithium-ion battery SBR-51LI: Approximately 3 hours ● There is also a one-pocket charger sleeve SBH-59 available. * For more details, please feel free to contact us.

• Other network tools

● The SSM-23A is a speaker microphone made by Yaesu Musen. ● It is a speaker microphone for Yaesu Musen's specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● The microphone features a 360° rotating belt clip on the back. ● The connector is an L-shaped φ3.5mm plug. ● It has a high dust and water resistance rating of IP67. *For more details, please feel free to contact us.*

• Other network tools

● The SHB-33 is a quick-release holster made by Yaesu Musen. ● It is designed for the Yaesu Musen specific low-power transceivers SRFD51 / SRFD51-L and SRFD55 / SRFD55-L. ● It is for mounting the compact, high-capacity lithium-ion battery SBR-51LI. * Please use the quick-release holster SHB-28 when using the lithium-ion battery SBR-42LI. ● It comes with a belt clip compatible with a belt width of 4.6 cm. ● The radio can be attached and detached with one touch. * For more details, please feel free to contact us.

• Other network tools