エクセリ List of Products and Services

● The SHA-10 is an armband made by Yaesu Musen. ● It allows for communication by speaking into the arm's intercom while wearing the specific low-power transceivers SRFD51, SRFD51-L, SRFD55, and SRFD55-L on your arm. ● The band width is approximately 3 cm, and the band length is about 45 cm. ● Use the included screws to attach the mounting hardware to the band buckle. ● Please note that it cannot be used when carrying cases SHC-49, SHC-43, or quick-release holsters SHB-33, SHB-28 are attached. *For more details, please feel free to contact us.*

• Other network tools

● The SHB-29 is a belt clip made by Yaesu Musen. ● It is the standard accessory belt clip for the specific low-power transceivers SRFD51, SRFD51-L, SRFD55, and SRFD55-L. ● It is used to attach the transceiver body to a belt. ● It accommodates belt widths of up to 4.6 cm. ● It is secured with 2 screws U03306027 for the SHB-29 belt clip. *For more details, please feel free to contact us.*

• Other network tools

●SRNX100 / SRNX100x are vehicle-mounted IP radios (IP transceivers) manufactured by Yaesu Musen Standard Horizon (STR). ●You can make simultaneous calls anywhere in Japan as long as you are within the coverage area of NTT Docomo 4G LTE or au 4G LTE. ●The only differences between SRNX100 and SRNX100x are as follows: ・SRNX100: Bluetooth compatible ・SRNX100x: Not Bluetooth compatible ●It supports simultaneous calls, group calls, and individual calls. ●Equipped with a high-quality, loudspeaker with 3W on the front of the unit and 1W on the included handheld microphone, it allows for clear communication even in noisy construction sites. Additionally, you can connect an optional external speaker MLS-200 (3M) with a maximum output of 12W to use it as a loudspeaker (PA function). ●Both the radio unit and the microphone are dustproof (IP54) and resistant to everyday water exposure, making them safe to use in light rain or dusty environments. ●The warranty period is 3 years. *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools

● The SRFD55 / SRFD55-L is a specific low-power transceiver manufactured by Yaesu Musen. ● It is a model equipped with a one-touch display switching function and multifunction keys. ● It features dual-channel reception unique to the STR On-Demand series. By utilizing simultaneous reception using two channels, the leader can receive communications from different groups at the same time and provide appropriate instructions and communications. ● It has a teleport function that allows the same group currently in use to switch channels with the press of a button during interference. If you are out of the communication range and cannot teleport, a short press of the teleport key will automatically find and switch to the communication channel of the members. ● You can use the area research function to analyze the radio wave conditions on-site and find channels that are less likely to experience interference, allowing you to select the optimal channel. ● By pressing the access key once to start talking, hands-free communication is possible, and it will automatically return to receive mode when you stop talking. ● It is equipped with a speaker that has a maximum volume of 700mW, allowing for clear audio even on construction sites. ● You can also communicate without using a repeater when using a repeater. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety equipment
• Other network tools

● The WX-ST700 is a boundary-type wireless microphone manufactured by Panasonic. ● It is a boundary-type wireless microphone for a 1.9GHz digital wireless microphone system. With the collaboration between the microphone and remote camera, it enables immersive hybrid meetings and classes. ● It is used in conjunction with wireless receivers WX-SR202DAN / WX-SR204DAN, additional wireless receiver WX-SE200DAN, WX-SR202A / WX-SR204A, and WX-SE200A. ● It is a unidirectional microphone. ● It captures the voices of 1 to 2 speakers clearly when placed on a table and transmits audio to remote locations during online or hybrid meetings and classes. ● The talk button can be used for two functions: talk lock setting and push-to-talk (PTT) setting. ● The battery life is as follows: - When using two AA nickel-metal hydride batteries or two AA alkaline batteries: approximately 13 hours. ● It has a 4-level audio input level meter, allowing you to check the connection status and audio input. * For more details, please feel free to contact us.

• Other network tools

● The WM-KG645 is a gooseneck microphone made by Panasonic. ● It is used as a gooseneck wireless microphone when combined with the separately sold tabletop wireless transmitter WX-ST600 from the PANASONIC 1.9GHz digital wireless microphone system. * Connect the WM-KG645 to the microphone input terminal of the WX-ST600. ● After combining the WX-ST600 and WM-KG645, it is used in conjunction with the wireless receivers WX-SR202DAN / WX-SR204DAN and the additional wireless receiver WX-SE200DAN. ● The length of the gooseneck microphone is 465mm. ● It can be flexibly bent. ● Accessories: - Wind screen ×1 - Instruction manual (this document) ×1 ● Other Panasonic wireless microphones include WX-ST700, WX-ST200, WX-ST210, WX-ST250, and WX-ST400. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

The EMS-938W (EMS938W) is a speaker microphone made by Alinco. It can be connected to Alinco's app-compatible vehicle-mounted digital simple radio DR-DPM62W and amateur radios, allowing for calls via Bluetooth to the app radio Air-Incom. 【Compatible Models】 - ACP-100L / ACP-101L (Air-Incom.Lite) - DR-BU60D - DR-DPM60 / DR-DPM60E - DR-DPM61 / DR-DPM61E - DR-DPM62W - DR-PM300SE For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• Other network tools

● ACP-100L/ACP-101L is the Alinco app radio "Air-InCom.Lite." ● The model number differs depending on the OS. ・ iOS: ACP-100L ・ Android OS: ACP-101L ● This is an app radio service provided by Alinco, and individual customers can also contract. Please contract directly with Alinco; we cannot act as an intermediary. ● You can make calls by selecting any channel from the pre-prepared open channel list of 500 channels. In other words, you can call anyone nationwide who has a matching channel if they are contracted with Air-InCom.Lite. ● The secret channel costs 250 yen per month (excluding tax), and the fee is incurred only by the host. ● There is only one host per channel. The host can freely change the members belonging to the secret channel. ● When you purchase the DR-DPM62W, you can use a coupon code to try Air-InCom.Lite for free for up to 3 months with one account. * Please feel free to contact us.

• Other network tools

The DR-DPM62W is a digital simple radio registered station 3R/3T (DCR) manufactured by Alinco. It is a UHF 351MHz band digital simple radio registered station (5W or 2W output) that supports 82 channels and can communicate as an IP radio using the app radio Air-InCom.Lite. By pairing it with your smartphone, you can operate both the app radio and the digital simple radio registered station. There are three ways to transmit: 1. Transmit as a digital simple radio registered station (communication distance is about several kilometers). 2. Transmit as the app radio call Air-InCom.Lite (anywhere in Japan). 3. Simultaneous transmission of the digital simple radio registered station and the radio call Air-InCom.Lite. It is equipped with a relay function for communication between the app radio and the digital simple radio registered station. In addition to the secret codes compatible with other companies, it adds Alinco's unique secret key to achieve high-security encryption. With 524,272 types of secret codes available, calls made through the app radio are impossible to intercept, similar to mobile phones. The antenna connector on the radio side is MJ. The manufacturer offers a one-year free warranty. For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools

● The IPB01G is a portable power supply with a built-in reusable battery manufactured by JVC Kenwood. ● Its main feature is that it utilizes high-quality recycled batteries from electric vehicles (Nissan Leaf), contributing to the SDGs. ● It is resistant to temperature changes and operates in environments ranging from -20°C to +60°C. ● With low self-discharge, it can maintain 92% of its power after six months and 84% after one year when stored fully charged, making it useful for disaster preparedness and BCP measures. Once charged, it can be left unused for about a year. ● It allows for approximately 2000 charge and discharge cycles (repeated charging), which is about three times that of standard rechargeable batteries. ● It has an output of 600W (with a peak of 1200W) and a HIGH-POWER mode of 900W, which can be switched with a single touch. ● The IPB01G can be charged using the following methods: - Using an AC adapter (AC100V): approximately 9.5 hours - Using a car adapter: approximately 14 hours ● The manufacturer’s warranty period is 36 months. For extremely low-priced sales of earphones, microphones, and batteries, please leave it to Excelli.

• Other network tools

● The CS-R15 is a programming software made by Icom. ● It is a cloning software specifically for the wideband handheld receiver IC-R15. ● It allows you to manage memory channels, program scan edges, category settings, group settings, program scan links, group links, radio memory editing, common settings, and more for the IC-R15. It can be used in various set modes. ● Files can be saved to a computer or microSD card. *For more details, please feel free to contact us.*

• Other network tools

● The LC-203 is a carrying case made by Icom. ● It is a dedicated carrying case for the wideband handheld receiver IC-R15. ● It protects the IC-R15 from scratches, impacts, and dirt. ● When attaching a strap to the IC-R15, please ensure it is fitted in a way that it does not catch on the Velcro of the carrying case. *For more details, please feel free to contact our company.*

• Other network tools

● The IC-R15 is a wideband handheld receiver made by Icom. ● It covers a wide frequency range from 108 to 500 MHz. ● It features an easy mode for beginners, allowing users to simply select registered reception targets categorized in advance to listen. Additionally, it has a favorites function that enables quicker selection of frequently listened memory channels. ● It can receive and record two signals simultaneously, allowing for the collection of more information. ● Recorded audio can be saved as WAV files on a microSD card, enabling data playback at any time without the worry of missing anything. Furthermore, it can record while audio is being played back, and information such as frequency, mode, S-meter, and time (user-set) can also be recorded along with the audio. ● It is equipped with Bluetooth functionality, allowing the use of devices like VS-3 and S9 IJKP. ● The scan speed is approximately 150 channels per second (in VFO mode). *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety equipment

● The WX-SR202A/WX-SR204A is a wireless receiver made by Panasonic. ● It is a wireless receiver for a 1.9GHz band digital wireless microphone system. It is a single system that can use up to 16 wireless microphones. ● By connecting the separately sold wireless antenna WX-SA250A, it receives audio from a wireless microphone or portable wireless transmitter, adjusts the volume, and outputs the sound. Up to 8 wireless antennas can be connected. ● It supplies power to the wireless antenna. ● The difference between the WX-SR202A and WX-SR204A is that the WX-SR202A can use 2 wireless microphones, while the WX-SR204A can use 4 wireless microphones. * Compatible wireless microphones: Wireless microphone (boundary type) WX-ST700, wireless microphone (handheld type) WX-ST200, tabletop wireless transmitter WX-ST600 + gooseneck microphone WM-KG645, etc. * For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Wireless LAN
• LAN construction and wiring work

● The WX-SE200DAN is an expansion wireless receiver made by Panasonic. ● It is a wireless expansion receiver compatible with the Dante audio network for a 1.9GHz digital wireless microphone system. * Dante refers to the audio network standard developed by Audinate, which allows for the transmission of up to 512 channels of uncompressed audio signals with low latency over a gigabit Ethernet network. ● It comes standard with a 4-channel tuner. ● Up to three WX-SE200DAN units can be connected to the wireless receivers WX-SR202DAN and WX-SR204DAN. ● By connecting three WX-SE200DAN units to the WX-SR204DAN, a maximum of 16 wireless microphones can be used. * Compatible wireless microphones include: boundary type wireless microphone WX-ST700, handheld type wireless microphone WX-ST200, tabletop wireless transmitter WX-ST600, and gooseneck microphone WM-KG645, among others. * For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Wireless LAN
• LAN construction and wiring work

● WX-SR202DAN/WX-SR204DAN are wireless receivers made by Panasonic. ● They are wireless receivers compatible with the Dante audio network for a 1.9GHz digital wireless microphone system. In a single system, up to 16 wireless microphones can be used. * Dante refers to the audio network standard developed by Audinate. It allows for the transmission of up to 512 channels of uncompressed audio signals over a gigabit Ethernet network with low latency. ● The difference between WX-SR202DAN and WX-SR204DAN is that the WX-SR202DAN can use 2 wireless microphones, while the WX-SR204DAN can use 4 wireless microphones. ● Up to three additional wireless receivers, WX-SE200DAN, can be added. Each WX-SE200DAN can support a maximum of 14 wireless microphones, while the WX-SR204DAN can support up to 16 wireless microphones. * For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs
• Wireless LAN
• LAN construction and wiring work

●HG-1501 (HG1501) is a 150MHz band collinear antenna manufactured by Nippon Antenna. ●It is an antenna for radio equipment. ●It is designed for a specified frequency within 145-170MHz. Please specify the fo (center frequency) in MHz when placing your order. ●It has an NJ connector. ●This antenna has a high gain of 5.15dBi with multiple radiating elements (antenna elements). ●The radiating elements are covered with an FRP material, providing excellent waterproofing and strength. ●It is DC shorted to prevent damage to the radio equipment from induced lightning. ●Due to its lightweight design, it is easy to install at high locations. A separately sold mounting bracket is required. *For more details, please feel free to contact us.

• Other network tools

● The HGW-150-1PN-09 is a 150MHz 1/2λ element (NP type) manufactured by Japan Antenna. ● It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ● The model number changes depending on the frequency. Please choose from the model numbers below. ・HGW-150-1PN-09 140-143: Frequency 140-143MHz ・HGW-150-1PN-09 143-146: Frequency 143-146MHz ・HGW-150-1PN-09 146-150: Frequency 146-150MHz ・HGW-150-1PN-09 150-155: Frequency 150-155MHz ・HGW-150-1PN-09 155-160: Frequency 155-160MHz ・HGW-150-1PN-09 160-165: Frequency 160-165MHz ・HGW-150-1PN-09 165-170: Frequency 165-170MHz ● It has an NP type connector. ● Please use it in combination with the separately sold NJ type base for installation. ● Since it is a specified frequency in the 150MHz band, please specify fo (center frequency) MHz when placing your order. *For more details, please feel free to contact us.

• Other network tools

The HGB-150-2-09EL is a 150MHz band vehicle-mounted high-gain element (MP type) manufactured by Japan Antenna. It is an antenna for vehicle-mounted radios. It is an element of a 150MHz band 5λ/8 whip antenna with a garter mount. Since the HGB-150-2-09EL is a specified frequency in the 150MHz band, please specify the fo (center frequency) in MHz when placing your order. Due to the fixed frequency of the HGB-150-2-09EL, there are also products with the following model numbers. These are not made to order. - HGB-150-2-09EL 150-153: Frequency 150-153MHz - HGB-150-2-09EL 153-156: Frequency 153-156MHz - HGB-150-2-09EL 156-160: Frequency 156-160MHz There are also sets available, such as HGB-150-2A-09, which includes the HGB-150-2-09EL and RSB-BA3-MJ, and HGB-150-2B-09, which includes the HGB-150-2-09EL and RSB-BA5-MJ. *For more details, please feel free to contact us.

• Other network tools

●HGW-150-1PN-09 (HGW1501PN09) is a 150MHz 1/2λ element (NP type) manufactured by Nippon Antenna. ●It is a λ/2 non-radial type antenna for radio equipment in the 150MHz band. ●Please use it in combination with the separately sold NJ type base for installation. ●Since it is a specified frequency in the 150MHz band, please specify the fo (center frequency) MHz when placing an order. ●The model number changes based on the frequency. - HGW-150-1PN-09 140-143: Frequency 140-143MHz - HGW-150-1PN-09 143-146: Frequency 143-146MHz - HGW-150-1PN-09 146-150: Frequency 146-150MHz - HGW-150-1PN-09 150-155: Frequency 150-155MHz - HGW-150-1PN-09 155-160: Frequency 155-160MHz - HGW-150-1PN-09 160-165: Frequency 160-165MHz - HGW-150-1PN-09 165-170: Frequency 165-170MHz *For more details, please feel free to contact us.

• Other network tools

The WH-150-3H-09 (WH1503H09) is a whip antenna (hole-mount type) for rooftop use in the 150MHz band, manufactured by Nippon Antenna. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole on the vehicle is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is the car's rooftop. * A whip antenna is one that has no directionality and can receive and transmit signals from any angle. It uses an NJ connector. It is for a specified frequency within the 150MHz band. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included: One instruction manual. There are also models available with a straight NJ connector bent at a 60-degree angle (WH-150-3HA-09) and an L-shaped NJ connector (WH-150-2H-09). * For more details, please feel free to contact us.

• Other network tools

The WH-450-3H-09 (WH4503H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 400MHz band. It is an antenna for radios operating in the 400MHz band. This is a whip antenna that is mounted by drilling a hole. The mounting hole diameter is φ23mm, and the thickness of the mounting plate is 15mm or less. The installation location is on the car's rooftop. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specific frequency within the 400MHz range. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: 1 instruction manual. * For more details, please feel free to contact us.

• Other network tools

The WH-150-3HA-09 (WH1503HA09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. The element is bent, with a 65-degree angle in the middle of the element. It is a whip antenna that is mounted by drilling a hole, suitable for a vehicle body mounting hole of φ23mm and a mounting plate thickness of 15mm or less. The installation location is on the vehicle's rooftop. *A whip antenna is one that has no directivity and can receive and transmit signals from any angle. It features an NJ connector. It is designed for a specified frequency within the 150MHz range; please specify the center frequency (fo) in MHz when placing your order. This product complies with safety standards. It is made to order; please inquire about the delivery time. Included accessories: one instruction manual. There are also straight NJ connector versions of WH-150-3H-09 with a straight element and WH-150-2H-09 with an L-shaped NJ connector. *For more details, please feel free to contact us.

• Other network tools

The HMG-450-3-09EL 450-470MHz is a high-gain element magnet antenna for licensed stations manufactured by Japan Antenna. It can be used as an antenna (capacitive grounded 3λ/4 whip antenna) for digital simple radio licensed stations. *A whip antenna is one that has no directionality and can receive and transmit signals from any angle. *λ (lambda) refers to wavelength. Please use it in combination with the separately sold mounting bases MG-BA3-09 (with coaxial cable 3D2V) and MG-BA5-09 (with coaxial cable 5D2V). The antenna element length is 48 cm, and the weight is 0.6 kg. The supported frequency range is 450MHz to 470MHz. It is the same product as the element of the high-gain whip antenna (magnet type) HMG-450-3B-09 for loop tops. Additionally, there is the HMG-450-3-09EL for a specified frequency within 350-470MHz and the HMG-450-3-09EL 350-370MHz for digital simple radio registered stations. *For more details, please feel free to contact us.

• Other network tools

● YK11 (YK-11) is a battery pack (lithium polymer battery) manufactured by J-Mobile. ● It is a rechargeable battery for the IP-PTT radio mobile terminal Z07R. ● The battery capacity is 3.8V/2300mAh. ● Charging is done while the battery is attached to the Z07R, and the charging time is approximately 2.2 hours. 【Compatible Models】 Z07R For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, feel free to contact us.

• Other network tools

The HMG-260-09EL (HMG26009EL) is a high-gain element (MP type) for vehicles manufactured by Nippon Antenna, designed for the 260MHz band. It is an antenna for mobile stations in digital public radio systems, used for municipal digital mobile communications and fire and emergency digital mobile communications. It is a capacitive grounded 3λ/4 whip antenna for the 260MHz band. * A whip antenna is one that has no directivity and can receive and transmit signals from any angle. * It is used in combination with a separately sold base. - When combined with base MG-BA3-MJ-2, it becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). - When combined with base MG-BA5-MJ-2, it also becomes a high-gain magnetic antenna for vehicles in the 260MHz band (5D-2V) HMG-260B-09 F=260-275 (set). * The compatible frequency range is 260 to 275MHz. * The connector is MP. * Included accessories: Instruction manual. * For more details, please feel free to contact our company.

• Other network tools

The HM-206#32 (HM206#32) is a speaker microphone (command mic) made by Icom. It is a speaker microphone that can be used with Icom's digital simple radio licensed station IC-DV6505 and others. It has both speaker and microphone functions. It features a large dot matrix LCD (128 dots x 64 dots) that supports 7 full-width kanji characters (14 half-width alphanumeric characters). It includes a noise canceling function with a built-in noise detection microphone. An emergency key (emergency call button) is mounted on the top surface. It has an IP54 dustproof and everyday waterproof performance. 【Compatible Models】 IC-DV6505 For extremely low-priced earphone microphones and batteries, please leave it to Excelli. For more details, feel free to contact us.

• Other network tools

The 『BbTALKIN CS2』 is a Bluetooth intercom manufactured by ON'S COMPANY. ● It is a Bluetooth intercom that can be easily attached and detached from a helmet with one touch, allowing hands-free simultaneous communication for up to 6 people. ● The communication range varies depending on the location, but it can reach up to 1.6 km (when used with 2 units in an open field). ● It is particularly recommended for situations that require precise timing and rapid communication, such as heavy machinery, bridge construction, civil engineering, surveying, demolition work, construction sites, sewer and plumbing work, electrical and air conditioning work, high-pressure washing, and drones. ● It operates on the 2.4GHz Bluetooth band, so it can be used without affecting medical devices. ● For rentals, we provide a waterproof headset B199110a, waterproof case B199041, clip mount B199055, USB charging cable, and numbering stickers as basic rental components for free. ● When placed in the waterproof case, all components including the speaker, microphone, and main unit are completely waterproof (IPX8) and have excellent dustproof performance (IP6X) (IP68).

• Other safety equipment

The "IP502H" is an IP radio manufactured by ICOM that allows nationwide calls in Japan over au 4G LTE and Docomo 3G/LTE networks. ● It can be used without a license and is available for rental nationwide for a minimum period of one day. There are no communication fees for rentals. ● Supports simultaneous calls. While it primarily functions like a one-on-one communication similar to a mobile phone, it also supports multi-party calls where a third party can interrupt the conversation at any time without waiting for the end of the dialogue. Essentially, there is no limit on the number of simultaneous calls. *Simultaneous calls can be made even without using an earphone microphone. ● Since it uses an LTE network, the sound quality is very clear, with minimal delay or interruptions in communication. ● If requested in advance, it can accommodate individual and group calls. *Pre-configuration is required before rental. ● It has an IP67 rating for waterproof and dustproof performance, making it suitable for outdoor use without issues. ● Battery life: 17 hours *This is an estimated time based on a usage ratio of 5 for transmission, 5 for reception, and 90 for standby.

• Other safety equipment

● The Z07R is an IP-PTT radio mobile terminal manufactured by J-Mobile. ● It is an IP radio that can make calls anywhere in Japan as long as it is within the coverage area of NTT docomo's 3G/LTE signals. ● The P.Talk voice communication has the following features: - Up to 4 groups can be simultaneously monitored. - A maximum of 255 groups can be registered. Up to 20 numbers, including your own, can be freely created into groups using UDG. ● It is a strong IP radio for indoor and underground calls as it can connect via WiFi in addition to mobile lines. ● The P.codeR/P.cloudS dedicated QR reader app automatically downloads information edited, created, and saved in P.cloudS to the device by launching the P.codeR application on the terminal, and the settings can be automatically updated by restarting the terminal and launching P.Talk. ● With the P.APP/IP-PTT radio communication service, you can use the P.Talk service simply by installing the AndroidOS dedicated application on your smartphone or tablet and performing a simple setup of your account using P.codeR. *For more details, please feel free to contact us.

• Other network tools

●EBC-58 (EBC58) is a belt clip made by Alinco. ●It is designed for specific low-power transceivers made by Alinco. ●It is used to secure the transceiver or radio to your belt. ●It comes with one fastening screw. ●It is compatible with belt widths up to 3.5 cm. *For more details, please feel free to contact us.*

• Other network tools

● EDC-341 (EDC341) is a cigar cable manufactured by Alinco (ALINCO). ● It is designed for digital simple radios and specific low-power radio transceivers, specifically for low-power devices up to 5W. ● The power for the mobile radio can be obtained from the vehicle's cigarette lighter, making installation easy. ● The cable length is 2m. 【Compatible Models】 ・DR-BU60D ・DR-BU61D ・DR-DPM60 / DR-DPM60E ・DR-DPM61 / DR-DPM61E ・DR-PM300SE *For more details, please feel free to contact us.

• Other network tools

●EME-48AMY (EME48AMY) is a commercial-grade microphone made by Alinco (ALINCO). ●It can be used with Alinco's 800MHz band radio microphone B-type digital guide system transmitter DJ-TX80, among others. ●It is a tie-clip microphone type. ●It comes with a rotating clip on the back of the microphone. ●It has a 2.5mm headphone jack. ●To monitor your own voice through headphones while transmitting with the DJ-TX80, please use it in combination with separately sold headphones EME-27 (earhook type) or AD001 (canal type). *For more details, please feel free to contact us.

• Other network tools

● The DJ-TX80 (DJTX80) is a digital guide system transmitter manufactured by Alinco (ALINCO). ● Please use it in combination with the receiver DJ-RX80. ● The transmitter allows you to monitor your own voice through headphones while transmitting. ● It is made of sturdy polycarbonate. ● The rechargeable battery is compatible with DJ-RX80, the previous model DJ-TX31, DJ-RX31, and others. ● The 800MHz radio microphone has a wide frequency range, allowing for high-quality transmission. ● With a wide occupied bandwidth digital GFSK modulation, it transmits human voices, chimes, music, and more in a natural sound. ● Microphone sensitivity and the on/off setting for self-monitoring can be customized. ● There are three transmission modes: - A hold function that transmits with a single touch of the button and turns off with another press. - PTT mode, which transmits only while the button is pressed. - Auto mode, which starts transmission three seconds after the power is turned on. ● The microphone is sold separately. It cannot be used without a microphone. ● This model has obtained technical standard conformity certification in accordance with ARIB RCR STD-15. * For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

● The DJ-RX80 (DJRX80) is a digital guide system receiver manufactured by Alinco. ● Please use it in combination with the transmitter DJ-TX80. ● By adopting the 800MHz band radio microphone type B, it achieves high sound quality. ● It has 28 channels, making it easier to operate in multiple groups. The number of channels is more than double that of the 300MHz band type C microphone. The channel matching for numerous subunits can also be easily set using the scan function. ● The rechargeable battery is common with the DJ-TX80, the previous model DJ-TX31, and DJ-RX31. ● It comes with an LCD display, making it easy to check settings. ● It is made of durable polycarbonate. ● You can customize settings such as the type of battery used, operation sounds, and the necessity of display lighting. It can automatically search for the transmitter's signal and will stop automatically when found, allowing for channel settings. *Note: It cannot be used in environments with interference. ● The disconnection detection function displays any abnormalities with the earphones on the screen. ● It is a model that has obtained technical standard conformity certification in accordance with ARIB RCR STD-15. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment

● The IC-DV6505 is a VHF band digital simple radio station (3A) manufactured by Icom. ● It is a vehicle-mounted VHF band simple radio that supports both digital and analog modes. It is compatible with analog simple business radios. ● It is suitable for use in construction sites, mountainous areas, and rural regions. ● The transmission output can be switched between 5W and 1W. ● Compared to the previous model IC-DV5505C, it is equipped with an external device connection terminal (Mini-DIN-9) that allows for data communication, enabling the transmission and reception of text data and supporting data communication channels. ● The included command microphone HM-206#02 is high-performance. - It supports 7 full-width characters (14 half-width alphanumeric characters). - It can record and playback transmitted and received audio for up to a total of 5 minutes, starting from the most recent. - By connecting an external speaker to the radio unit, audio from the command microphone HM-206#02 can be amplified through the external speaker. - It features noise cancellation. - It has a short message function. ● The manufacturer offers a 1-year warranty. * For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Other network tools

The WH-150-2H-09 (WH1502H09) is a rooftop whip antenna (hole-mount type) manufactured by Nippon Antenna for the 150MHz band. It is an antenna for radios operating in the 150MHz band. This is a whip antenna that is mounted by drilling a hole. It is a product with an L-type connector for a mounting hole diameter of Φ43-45mm. * A whip antenna is defined as an antenna that has no directionality and can receive and transmit signals from any angle. The installation location is the car's rooftop. It features an L-type NJ connector. It is for a specified frequency within the 150MHz range. Please specify the fo (center frequency) in MHz when placing your order. This product complies with safety standards. It is made to order. Please inquire about the delivery time. Included accessories: 1 tightening ring, 1 tightening tool, and 1 instruction manual. There is also the WH-150-3HA-09 with a straight NJ connector that has a straight element and the WH-150-3HA-09 with a straight NJ connector that has an element bent at a 60-degree angle. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact us.

• Other network tools

The SP-39AD (SP39AD) is an external speaker with a built-in power supply made by Icom. It is designed for the Icom communication receiver IC-R8600. It is a built-in power type, and since the IC-R8600 does not come with an AC adapter or stabilized power supply, it can be powered from a household AC100V source by connecting it to the SP-39AD. It comes with a stand at the bottom. It is sized to match the IC-R8600, so when placed side by side, they have the same height. For extremely low prices on earphone microphones and batteries, please leave it to Excelli. For more details, please feel free to contact us.

• Other network tools

● The LC-196 (LC196) is a hard case made by Icom (ICOM). ● It can store Icom's simultaneous communication type specific low-power transceivers IC-5020 and IC-5880. ● It prevents damage to the screen and body of the radio when dropped. ● It has a D-ring, so by using the separately sold long shoulder strap (carrying strap) MB-57L, you can carry the radio over your shoulder. ● You can operate the front and side parts of the radio while the LC-196 is attached. ● You can charge the radio while it is stored in the hard case by removing the snap button on the bottom of the LC-196 body. *For more details, please feel free to contact us.

• Other network tools

● The AM-6 is a microphone with a magnetic base made by Icom. ● It is a microphone with a magnetic base for the IC-MS5880, a simultaneous communication type transceiver for work communication. ● The magnetic base makes it easy to secure the microphone. ● It can be fixed to dashboards and other surfaces using the included screws, making it convenient for places where magnets cannot be used. ● It features a microphone mute function. ● The LED allows you to check the status of the switch. ● The flexible arm can be bent easily. *For more details, please feel free to contact us.*

• Other network tools

● SKZ-EP-000020/SKZ-EP-000021 are new completely wireless earphones OpenFit made by Shokz (formerly AfterShokz). ● The model number changes depending on the color. ・SKZ-EP-000020: Black ・SKZ-EP-000021: Beige ● These are wireless earphones & microphone that can be used with both radios and smartphones. They connect via Bluetooth 5.2. ● You can listen with clear sound while delivering a distinct voice. ● High-quality sound with bright highs and deep bass thanks to DirectPitch technology. ● Adopts a unique low-frequency enhancement algorithm that transmits low-frequency vibrations directly to the ear without masking them. ● The open-ear design with ear hooks ensures they won't fall out while running. ● One OpenFit can connect to two devices simultaneously with multipoint connectivity. ● Up to approximately 7 hours of continuous playback on a full charge. With the charging case, it can be used for up to approximately 28 hours. ● A 5-minute charge provides about 1 hour of battery life. * For more details, please feel free to contact us.

• Other network tools

● The AG-5880#11 is a line compensator made by Icom. ● It is designed for the Icom simultaneous communication transceiver parent unit IC-MS5880#11 for work communication. ● In environments where the radio waves of the parent unit IC-MS5880#11 are weak, it amplifies the signal and extends the area. It expands the communication area in large construction sites, factories, and plants. ● The AG-5880#11 can extend up to 50 meters with a coaxial cable 5D-2V for each unit. Up to three AG-5880#11 units can be connected, allowing for a total extension of up to 150 meters. ● In other words, the communication range of the IC-MS5880#11 expands to 150 meters plus additional range. ● Each AG-5880 can be accessed by the child unit IC-5880#11 for hands-free simultaneous communication. ● Power supply can be provided through an external AC adapter (for AC100) and via coaxial cable from the parent unit IC-MS5880#11, allowing for two power supply methods. ● It has a robust body. ● A license application is required for the use of the line compensator. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. * For more details, please feel free to contact our company.

• Other network tools

The IC-MS5880#11 is a master unit of a simultaneous communication transceiver for work communication manufactured by Icom. It is a specific low-power transceiver. It supports hands-free simultaneous communication and multi-party communication. 1. Maximum simultaneous communication among 9 parties: 2 IC-MS5880 units, 8 IC-5880 units 2. Maximum simultaneous communication among 5 parties: 1 IC-MS5880 unit, 4 IC-5880 units Area expansion is possible. 1. By connecting the line compensator AG-5880 to the IC-MS5880, you can expand the area up to 50m, and by connecting up to 3 AG-5880 units, you can achieve a total area expansion of over 150m, allowing simultaneous communication with IC-5880 units. 2. By connecting the VE-PG4 to the IC-MS5880 and connecting to an IP network, simultaneous communication among IC-5880 units can be achieved between distant buildings. 3. Using the VE-PG4 to connect to an IP phone allows for group calls and simultaneous communication with IC-5880 units from office telephones, reducing the effort for office communication and phone responses. The IC-MS5880 has the following communication modes: 1. Simultaneous communication mode 2. PTT transmission mode 3. Repeater operation mode 4. Transmission prohibition mode 5. Auto channel mode

• Other safety equipment
• Other network tools

The IC-5880#11 is a subunit of a simultaneous communication type transceiver for work communication made by Icom. It is a specific low-power transceiver. ● It allows hands-free simultaneous communication for multiple users. 1. Up to 9 parties can communicate simultaneously: 2 units of IC-MS5880 and 8 units of IC-5880. 2. Up to 5 parties can communicate simultaneously: 1 unit of IC-MS5880 and 4 units of IC-5880. ● Area expansion is possible. 1. By connecting the line compensator AG-5880 to the master unit IC-MS5880, you can extend the area up to 50m, and by connecting up to 3 AG-5880 units, you can achieve a total area expansion of over 150m, allowing simultaneous communication with the subunit IC-5880. 2. By connecting the RoIP gateway VE-PG4 to the master unit IC-MS5880 and connecting to an IP network, simultaneous communication with the subunit IC-5880 can be achieved between distant buildings. 3. By using the RoIP gateway VE-PG4 to connect to IP phones, you can perform group calls or simultaneous communication with the subunit IC-5880 from office telephones, reducing the effort for office communication and phone responses. ● With the included lithium-ion battery pack BP-304A, it can operate for approximately 15 hours. ● It is compatible with the conventional model IC-4880.

• Other safety equipment
• Other network tools

●SP-41 is an external speaker made by Icom. ●It can be used with Icom communication receivers IC-R8600, amateur radio equipment IC-7610, IC-7610, IC-7300, IC-9700, IC-9100, IC-7600, and IC-7410. ●It is equipped with a sound quality switch. ●It has A/B dual input. ●It features a mute function. For extremely low-priced sales of earphone microphones and batteries, please leave it to Excelli. *For more details, please feel free to contact us.

• Other network tools