カネコ化学 Product Lineup

The epoxy resin solvent and stripping agent 'eSolv 21HEK' swells, collapses, and separates cured (hardened) epoxy resin by immersion. Additionally, it has no flash point and is low in toxicity, making it easy to handle and contributing to reduced environmental impact. It does not contain chlorine-based solvents commonly found in other products! Past achievements include: - Dissolving and stripping epoxy resin on substrates - Opening encapsulants on substrates (for good product analysis and defective product analysis) - Removing epoxy resin for SEM observation - Opening power cards - Cleaning dispenser nozzles contaminated with two-component epoxy adhesives If you are having trouble with cleaning or dissolving epoxy, please feel free to contact us. [Features] ■ Not subject to the Organic Solvent Control Law, the Specific Chemical Substances Control Law, or the Fire Service Act ■ Low environmental impact and safe to work with ■ Non-flammable and non-water-soluble ■ Significantly reduces dissolution time ■ No chlorine-based solvents used! *For more details, please refer to the catalog. Feel free to contact us for inquiries or consultations!

The "eSolve 21AM-1" is a powerful epoxy-based resin release agent (solvent). It removes resin by dissolving or causing slight swelling, leading to flaking and separation. It is also effective on urethane-based resins. Additionally, there has been an increase in inquiries from the lens industry. Features: - Dissolution and removal of epoxy and urethane resins - Processing of workpieces that can only be separated by physical force - Reduction of working time - Performance significantly improves with heating - Particularly effective at temperatures above 80°C - Many proven results in lens separation - Numerous successful cases of ink removal from lens coatings - Proven results in retrieving samples after SEM observation *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Traditionally, for the dissolution, swelling, and peeling of cured epoxy resins, cleaning agents with a significant environmental impact and even hazardous cleaning agents subject to fire safety laws have been widely used. Kaneko Chemical has developed eSolve 21HEK to address these issues. (Patents applied for both domestically and internationally)

"eSolve 21RS" is a solvent with excellent dissolving power for silicone resins (silicone rubber, silicone grease). It dissolves silicone resins simply by immersion. Additionally, it becomes even more powerful when heated! Silicone rubber (RTV) dissolves in about 20 minutes, losing its shape. It can also be used for cleaning cosmetic manufacturing kettles, cleaning cosmetic piping, and cleaning piping in food factories. There are also proven results for dissolving POM (polyacetal) and PA66 (nylon). [Main Uses] ■ Cleaning of kettles and piping in cosmetic factories ■ Cleaning of piping in food factories ■ Cleaning of endoscopes ■ Opening sealants on power supply boards *For more details about the product, please refer to the materials. Feel free to contact us with any inquiries.

Kaneko Chemical Co., Ltd., which specializes in environmentally friendly cleaning agents and resin solvents, has launched an online store for resin solvents called "Youkaizai.com" as of April 1, 2020. https://youkaizai.com/ Currently, we are focusing on selling products aimed at dissolving epoxy resins, urethane resins, and silicone resins, which have received many inquiries. Products can be purchased starting from 100g. In the future, we will gradually propose products that meet customer needs through our online store. If you have any questions or concerns, please feel free to reach out to us. We also welcome requests for specific types of solvents you would like to see. We look forward to hearing from you, regardless of industry.

We have a proven track record of using acrylic resin, polycarbonate resin (PC), and ABS resin adhesives as alternatives to chlorine-based solvents such as methylene chloride. This new brominated solvent (adhesive) is not subject to the Fire Service Act, the Poisonous and Deleterious Substances Control Act, the Organic Solvent Poisoning Prevention Act, or the Specific Chemical Substances Hazard Prevention Act, making it less regulated and designed with safety in mind. Please give it a try. **Main Features of Kaneko Chemical's 'eSolv 21RA-1':** (1) Numerous proven results as an adhesive and solvent for acrylic resin, PC resin, and ABS resin. (2) Many proven results as an alternative to methylene chloride (dichloromethane). (3) Easy to handle due to fewer regulatory restrictions: - Not subject to the Fire Service Act - Not subject to the Poisonous and Deleterious Substances Control Act - Not subject to the Organic Solvent Poisoning Prevention Act - Not subject to the Specific Chemical Substances Hazard Prevention Act **Main Application Examples of 'eSolv 21RA-1':** (1) As an adhesive and solvent for acrylic resin, PC resin, and ABS resin. (2) Removal of acrylic coatings and similar substances. (3) Removal of epoxy resin and polyurethane resin adhered to nozzles. ★ Please also check our product catalog (with photos). Feel free to contact us for inquiries or consultations!

The solvent and release agent for urethane resin, "eSolv 21HUK," is a product specifically targeting urethane resin. Additionally, it has no flash point and low toxicity, making it easy to handle and contributing to reduced environmental impact. If you are having trouble cleaning cured urethane in injection devices, cleaning cured urethane in nozzles, or maintenance after work, please feel free to contact us. 【Features】 ■ Not subject to organic regulations, specific regulations, or fire laws ■ Low environmental impact and safe to work with ■ Non-combustible and non-water-soluble ■ Significantly reduces dissolution time ■ Proven results in cleaning urethane adhered to nozzles ■ Proven results in opening potting agents for urethane resin *For more details, please refer to the catalog. Feel free to contact us for inquiries or consultations!

【Features】 ◆ A fluorine-based cleaning agent specialized for the cleaning and dissolution of uncured to partially cured urethane/epoxy. This cleaning agent is effective for both water-soluble and oil-soluble resins with just one solution. It can clean a wide range from uncured urethane raw materials to partially cured mixtures. ◆ No flash point, non-applicable under fire safety laws!! It is a highly safe cleaning agent. ◆ Three types available, ranging from low-cost to high-performance/low-toxicity products. Due to its low toxicity, it contributes to reducing the burden on workers. It is suitable as an alternative to chlorine-based, hydrocarbon-based, and bromine-based cleaning agents. 【Applications】 ◆ Cleaning agent for uncured urethane and epoxy resins ◆ Cleaning agent for automatic dispensing machines, piping, and tanks ◆ Soaking and cleaning of partially cured mixing nozzles ◆ Cleaning/removal of uncured urethane and epoxy adhesives ◆ Flow-through/wiping cleaning of molds, manufacturing kilns, etc. 【Physical Properties】 ◆ Main component: Fluorine-based solvent ◆ Flash point: None ◆ Boiling point: 77–78℃ ◆ Specific gravity: 1.07–1.10 (20℃) ◆ ODP: 0 (reference value)