三協インタナショナル List of Products and Services

This is an explosion-proof pressure sensor designed for applications such as hydrogen, oil, and natural gas, suitable for use in hazardous areas. It has obtained explosion-proof certifications from ATEX, IECEx, and EAC, and domestic explosion-proof certified products (JPEx) are also available. It is compatible with oil, gas, and hydrogen applications. The measurement range is wide, from 0.4 Bar (40 KPa) to 1000 Bar (100 MPa). E-10 is the standard type, while E-11 is the flush diaphragm type.

This is an explosion-proof pressure sensor designed for applications such as hydrogen, petroleum, and natural gas, suitable for use in hazardous areas. It has obtained explosion-proof certifications from ATEX, IECEx, and EAC, and domestic explosion-proof certified products (JPEx) are also available. It is compatible with petroleum, gas, and hydrogen applications. The measurement range is broad, from 0.4 Bar (40 KPa) to 1000 Bar (100 MPa). E-10 is the standard type, and E-11 is the flush diaphragm type.

Current sensors for battery management that are important for safety, and current sensors for motor control and fault detection. Current sensors for battery management compatible with electrified vehicles, and battery safety sensors for thermal runaway detection.

Supports low pressure range up to a maximum of 100 MPa range Media temperature up to 400°C Built-in AMP (4-20mA, 1-5VDC, 0-5VDC, 0.5-4.5VDC) Low cost and short delivery time

You can select between analog and digital output. It can measure corrosive liquids and water vapor. Inexpensive and low cost. Range up to 15kpsi. ±1% span accuracy. A stable, microfabricated sensor without conventional PN junctions.

Wide pressure range from 2 to 10,000 PSI. CE compliant product. Various pressure ports and connection configurations. High precision and compact.

CE marked products. Capable of hydraulic and pneumatic measurement. Various pressure ports and connection ports can be selected.

The optoNCDT1320 can be used for measuring displacement, distance, and position, and its compact shape allows for installation in tight spaces, making setup easy. It offers high measurement accuracy, with a maximum measurement rate of up to 2 kHz. The sensor can be tested using a multifunction button, and additional sensor settings can be configured via the web interface.

The optoNCDT1420 is a compact triangulation displacement sensor with an integrated controller. It can measure with a maximum range of 500 mm and a maximum response frequency of 4 kHz. It supports not only analog output but also digital output. Automatic target correction (ActiveSurface-Compensation = ASC) enables stable control of the spacing signal.

High-speed measurement of displacement, distance, and position. Ideal for measuring the displacement of heated targets and organic materials due to the use of blue diodes. A wide range of measurement options is available, from 20 mm to 1000 mm. Accurate measurements of various materials are possible thanks to high-performance lenses, laser control, and evaluation algorithms.

Because it uses a blue diode, it can measure heated targets and organic materials. It can measure with a maximum response of 20 kHz and a maximum resolution of 0.0015. A maximum measurement rate of 49.14 kHz can be set. High-performance lenses, laser control, and evaluation algorithms enable accurate measurements of various substances.

It has a modular structure designed for multiple channels and can be expanded up to 8 channels. It can be connected to signal processing electronics via a preamp module. It has a web interface through Ethernet, allowing for configurable controller settings.

It features high precision, intuitive operability, a long-lasting battery, and preset measurement mode functions. It has a maximum battery life of 5 hours and can save measurement data to an SD card. It is compatible with all types of capacitive sensors from Micro-Epsilon, allowing for various measurement tasks such as gap monitoring of rotors in wind power plants and roller alignment in machinery and plants.

High-precision automatic assembly. The resolution is 0.001mm (output is nonlinear). Two types of sensors can be selected, and electronics are built-in.

We measure shaft vibration/shaft position/eccentricity of turbines, compressors, pumps, etc. non-contact using the eddy current method. It can also be used in high-temperature and explosive hazardous areas, enabling long-term machine protection and monitoring with high reliability.

We measure shaft vibration/shaft position/eccentricity of turbines, compressors, pumps, etc. non-contact using an eddy current method. It can also be used in high-temperature and explosive hazardous areas, enabling long-term machine protection and monitoring with high reliability.

The gauge with Leadless technology, which is patented by Kulite, has a structure that does not use gold wire, making it resistant to vibrations. It is used in applications such as transmission and steering systems.

The structure of the gauge, which is part of the Leadless technology patented by Kulite, does not use gold wire for its wiring and is characterized by its resistance to vibration. In addition to the standard model, there are models that can measure temperature simultaneously, models with acceleration compensation, and connector versions. They are used for measuring coolant and oil pressure.

Can be used for pressure measurement of oils and other liquids used in automobiles. Available in cable version and connector version. Used in brake systems, etc.

Kulite has a structure that does not use gold wire for the wiring of its leadless technology gauge, which is characterized by its resistance to vibration. There are high-precision models with built-in amplifiers (5V output) and digital correction. They are used in brake systems and hydraulic systems.

A pressure sensor that can be used up to +200 °C while having a built-in amplifier (5 V output). It is mounted with M6 x 1 or M8 x 1 screws. There are also models that measure pressure and temperature simultaneously. It is used in various automotive applications such as brake systems, coolant, hydraulic systems, and gear systems.

A model that enables process measurement. Featuring a ceramic diaphragm for stable low-range measurement. It can play an important role in automation. The capacitive ceramic measurement cell (diaphragm) allows for stable low-pressure measurement. ATEX and IECEx certified. Measurement range 0 to 2.5 KPa, maximum 10 MPa.

It is used in wind tunnel tests and flight tests.

This is a high-performance and low-cost product that can be used in OEMs and testing equipment, featuring a high-precision pressure transducer. The 6100 series achieves an accuracy of 0.01% FS and a repeatability of 0.003% FS within its operating temperature range. It is temperature compensated between 15 and 45°C to accommodate temperature variations. The accuracy includes linearity, hysteresis, repeatability, and temperature errors within the compensated temperature range. Zero and span can be adjusted via a serial interface.

There is a pressure sensor with acceleration compensation, high sensitivity (750 pC/bar), high temperature (up to 777°C), and high response (up to 15 kHz).

It can be used in high-pressure environments and is waterproof. The displacement amount is up to 12mm. We have a variety of models available, so please feel free to contact us.

Covers low frequency range (0.5 to 400 Hz) with a linearizer Operating temperature range (-25 to 80°C) Current (50 μA/mm s) or voltage output (50 mV/mm/s)

The one-axis optical fiber gyro VG221 (MS) is the latest model manufactured by Fizoptika Malta since 2022. It features an ultra-compact and ultra-lightweight design, achieving a volume of 10 ml and a weight of 15g. Additionally, its power consumption is very low at 0.3W or less, making it ideal for drone applications. A low-noise version, the VG221LN, is also available. Each model can be selected with a magnetic shield option, which can reduce magnetic response to 0.1°/h/Gauss.

The single-axis fiber optic gyro VG910 is a proven model manufactured by Fizoptika Malta since 1991. In 2010, the VG910F1 was installed as a fiber optic gyro for flight control in commercial aircraft (Airbus A350). It is also specified for applications such as antenna stabilization and tracking telemetry.

The three-axis optical fiber gyro G121(M) is the latest model manufactured by Fizoptika Malta, which began production in 2023. It features a compact and lightweight design, achieving an industry-leading volume of 12 cl and a weight of 125 g. With a low power consumption of 2W, it is ideal for drone applications and is also used for image stabilization and gimbal stabilization. By choosing a version with magnetic shielding, it is possible to reduce magnetic response to 0.3°/h/Gauss.

The six-axis optical fiber gyro U121D is the latest model that Fizoptika Malta started manufacturing in 2024. With a volume of 12cl and a weight of 180g, it is very compact and lightweight, yet capable of high-precision six-axis measurements. A three-axis optical fiber gyro is used for measuring angular velocity, while a three-axis MEMS accelerometer is used for measuring acceleration. It is ideal for applications such as inertial navigation systems for drones, unmanned vehicles, and remote-controlled vehicles.

Depending on the product, it supports analog output, Modbus output, and more. By connecting via a dedicated USB cable to a PC, detailed configuration changes can be made on the software. There are several types available to suit different applications, so please feel free to contact us!

It is a high-precision temperature and humidity sensor from Novasina. The humidity accuracy is at the highest level of ±0.4% (accuracy of HT-EIS at 15°C to 30°C). It is used in combination with a dedicated transmitter.

There are two types available: the Pro with a USB-A port for PC connection and the Smart with a USB-C port for connecting to Android smartphones. You can use the dedicated software (free of charge) to obtain measurement values, perform calibration, and make other setting changes. We also offer the nLink mobile set, which includes accessories such as a calibration humidity generator.

This is a compact-sized signal conditioner designed for DIN rail mounting. It allows you to select the applied voltage and oscillation frequency, and you can choose the voltage and current output over a wide output range.

I have compiled a list of the specifications for Jewell's inclinometers. You can use it for product selection.

Introducing the operating principle of a servo-type tilt sensor on one A4 page!

The single-axis optical fiber gyro "VG103S series" is an angular velocity sensor that adopts an all-plastic design without using any metal parts. Among them, the 'VG103SD' supports RS-422 digital output and is an extremely lightweight model weighing only 40 grams. In addition to the low-noise specification VG103S-2LND, it is also possible to choose a version with magnetic shielding, which can reduce magnetic response to 0.03°/h/Gauss. 【Features】 ■ Single-axis measurement, RS-422 output ■ Compact and lightweight all-plastic design (approximately 40 grams) ■ Low power consumption (0.5W) ■ Magnetic resistance (1° or 0.03°/h/Gauss) *For more details, please download the PDF or feel free to contact us. *We also offer demo units for loan, so please feel free to consult with us.

Servo-type single-axis inclinometer, high precision, high stability. We provide three types of outputs for three types of input voltages.