三協インタナショナル List of Products and Services

Response frequency DC to 3000 Hz Operating temperature range -40 to 120 ℃ Weight under 1 g, maximum overrange 10000 G

Range: ±5 to ±2500 G (Half Bridge) Output: mVDC Shock resistance: Up to 10000 G Temperature compensation range: -20 to 80 ℃ Operating temperature range: -40 to 120 ℃

Linearity: ±0.1%, horizontal axis sensitivity error: 2% or less Applied voltage: 4-30 VDC, shock resistance: 6000 G Operating temperature compensation range: -55℃ to 125℃

Linearity: ±0.1%, Horizontal axis sensitivity error: 3% or less Applied voltage: 4-30 VDC, Shock resistance: 6000 G Operating temperature compensation range: -55 to 125 ℃

Range: ±50 to 5000 G, DC measurement and dynamic measurement A2: ±15 VDC, B2: 24 to 32 VDC power supply selection Temperature compensation range: 20 to 80 ℃, linearity: ±1%

High overrange, maximum 5000 G, sturdy, low-noise cable adopted.

Range: ±2 to ±100 G Response frequency: up to 1000 Hz Shock resistance: up to 5000 G Environmental resistance: IP65 Temperature compensation range: -40 to 100℃

Overrange: Maximum 10,000 G applied voltage 2-10 VDC, linearity 1% FS IP65, low-noise cable

Highest accuracy, temperature stability, repeatability Compact design with built-in self-test function

Highest accuracy, temperature stability, repeatability Compact design with built-in self-test function

It has a size of 7 x 7 x 5.66 mm and a lightweight of 1.2 g, allowing for dynamic measurements without affecting the measurement target, with a maximum of 49,033 m/s² and a frequency range of 1 to 9,000 Hz (±5%). It can also be used in environments with temperatures up to 200 °C.

Three acceleration pickups are mounted in three axial directions on an aluminum block. The aluminum block has two titanium pipes for water cooling, to which tubes are attached to circulate the cooling water. The size is 28.0 x 28.0 x 22.4 mm (excluding the water cooling ports) and the weight is 3 g.

High sensitivity (100 pC/G) Wide response frequency (0.5 to 5,000 Hz) Explosion-proof certification

High sensitivity (100 pC/G) Wide response frequency (0.5 to 10,000 Hz) Explosion-proof certification

High sensitivity (50 pC/G) High temperature resistance (-55 to 500℃) Explosion-proof certification

Supports extreme low temperatures to high temperatures (-253 to 500 ℃) Explosion-proof certification

High temperature resistance (-54 to 650 ℃) Radiation resistance: Gamma rays (10^11 erg/g), Neutrons (10^18 n/cm²) Explosion-proof certification

Wide operating temperature range (-55 to 260℃) High response frequency (up to 7,000 Hz) Current output (10μA/G), capable of long-distance transmission (up to 1000 m) Explosion-proof certification

High response frequency (up to 8,000 Hz) High sensitivity (50μA/G) Current output (50μA/G), capable of long-distance transmission (up to 1000 m) Explosion-proof certification

Response frequency (0.2 to 350 Hz) Current output (2 mA/G) Long-distance transmission possible (up to 1000 m)

Response frequency (0.2 to 350 Hz) Current output (2 mA/G) Long-distance transmission possible (up to 1000 m)

Built-in amplifier type (IEPE type) Voltage output (100 mV/G or 500 mV/G) Protection rating IP67

4-20 mA current loop output (acceleration range selectable: 1, 2, 5, 10, 20 G) Protection rating IP67

The ET series has 38 standard products and can measure a maximum rotational speed of 130,000 rpm and a maximum torque of 77,000 Nm.

Selectable according to application: slip ring type, reaction type, non-contact type, etc. High sensitivity: Range ±0.05 Nm / ±10 VDC output. From static measurement to dynamic measurement (max 37000 rpm).

Customization design compatible with customer robot specifications Low sensitivity to cross loads Digital I2C interface

- High precision and high stability due to servo type - Built-in damping system - Wide range of operating temperatures

The "Compact Digital Pressure Transducer CPT6020" is a high-precision pressure gauge. It is characterized to achieve an accuracy of 0.02% FS across the full pressure and temperature range, which includes linearity, hysteresis, repeatability, and temperature error. Measurement values can be output to a computer using "RS-232" or "RS-485". It incorporates a low hysteresis silicon sensor with electronically compensated linearity over a wide temperature range. 【Features】 ■ Low cost / High precision ■ RS-232 or RS-485 communication (analog output type is also available) ■ IP67 dust and water resistant ■ High response (50Hz/20ms) ■ 316L stainless steel housing *For more details, please refer to the PDF document or feel free to contact us.

Are there any challenges in displacement measurement underwater or underground in the civil engineering and construction industry? The displacement sensor "DS Series" is a rubber-structured capacitive displacement sensor. It is robust and can measure without breaking even if the displacement axis shifts in a vibrating environment! It can measure the displacement, deformation, and cracks of objects. Made of silicone rubber with a waterproof structure (equivalent to IP68), it can be used in harsh environments such as vibrating locations, outdoors, and underwater. 【Features】 ◆ Easy installation (two M6 holes) ◆ Usable in harsh environments such as outdoors and high humidity. ◆ All-weather use (UV-resistant coating) ◆ Vibration-resistant, robust structure. *For detailed specifications, please download the PDF. Feel free to contact us.

The main advantage of ECS is its high-speed external serial interface. While the compass is installed, a serial cable or a usable USB cable can be temporarily connected through an RJ12-style modular receptacle without removing the system wiring. This allows for easy access during installation for calibration and tuning. It also provides a valuable diagnostic port that can be used for auxiliary readings as needed. The RJ12 connection is primarily used when it is undesirable to secure and implement the sensor.

1-3 axes Highest precision, temperature stability, repeatability IP65, RoHS compliant

MEMS AM sensors can measure from DC (1Hz). There are integrated cable and connector types available, which can be selected according to the application.

MEMS AM sensors can measure from DC (0Hz). Cables are available in integrated sensor types and connector types, allowing for selection based on application.

MEMS AM sensors can measure from DC (0Hz). There are integrated and connector types of cables available, which can be selected according to the application. Options for 2-axis and 3-axis are also available.

1-3 axes Highest precision, temperature stability, repeatability IP65, RoHS compliant

Highest accuracy, resolution, temperature stability Output type: RS485 IP67 compliant

Achieving high precision through compensation functions Ultra-low pressure range: ±160Pa to ±1MPa / ±1.6mbar to ±10bar / ±0.5inH2O to 150psi SPI interface TEB: ±0.25% FSS Compliant with RoHS and REACH

This is a document that can be used for comparing the features and specifications of accelerometers and acceleration sensors. You can view a list of the specifications for the accelerometers and acceleration sensors handled by Sankyo International Co., Ltd. Please make use of it as a tool for selecting sensors. If you have any questions or need further details, please feel free to contact us.

The D model is suitable for measuring uniaxial displacement or vibration when the reflectivity of the target is constant. An output signal proportional to the change in reflectivity will be generated in proportion to the gap with the target. (Reflectivity-dependent type)

This is a document that can be used for comparing the features and specifications of accelerometers and acceleration sensors. You can view a list of the specifications for the accelerometers and acceleration sensors handled by Sankyo International Co., Ltd. Please make use of it as a tool for selecting sensors. If you have any questions or need further details, please feel free to contact us.

The RC model is suitable for measuring the rotation or parallel movement of targets with variable reflectivity. The output signal is proportional only to the gap of the target and does not vary proportionally with changes in reflectivity. (Reflectivity correction type)

As an example of two pressure sensor products, I would like to introduce a translation example of an English data sheet (product specifications). I hope this will help you find the necessary data from English catalogs when you want to purchase overseas products. [SanKyo International Co., Ltd. has been an importer of electronic components and sensors for 50 years, constantly pursuing and supplying products that meet customer needs. To ensure that our customers can use our products with confidence, we are enhancing our aftercare services and will continue to strive to earn even more trust from our customers.]

This is a high-temperature compact pressure sensor with a very high natural frequency and the smallest class of thread size, made possible by Kulite's patented leadless technology. It is suitable for both static and dynamic pressure measurements and can be used in harsh environments. It has a wide operating temperature range and can be used in many industrial fields, including aerospace!

Kulite, a company with a wealth of experience in the aerospace industry, automotive industry, gas turbines, steam turbines, and defense industry. This is a digest catalog of pressure sensors particularly suited for the aerospace field. Kulite, based in the United States, has a history of over half a century as a manufacturer of pressure transducers and has many achievements in the aerospace industry, automotive industry, gas turbines, steam turbines, and defense industry. As a pioneering company in semiconductor silicon gauges, Kulite has developed numerous technologies and currently holds 150 patents. They have developed a leadless structure sensor as their latest technology. The sensor chip on an insulated silicon base is connected directly to pins without using bonding wires, making it suitable for use in high-vibration and high-temperature environments. There are hundreds of standard models available, and thousands of types as sensor elements. In addition to standard products, we also accommodate special specifications tailored to applications, so please feel free to consult us.

Kulite, a company with a strong track record in the aerospace industry, automotive industry, gas turbines, steam turbines, and defense industry. This is a digest catalog of pressure sensors particularly suited for the automotive field. Kulite, based in the United States, has a history of over half a century as a manufacturer of pressure transducers, with significant achievements in the aerospace industry, automotive industry, gas turbines, steam turbines, and defense industry. As a pioneering company in semiconductor silicon gauges, Kulite has developed numerous technologies and currently holds 150 patents. They have developed a leadless structure sensor as their latest technology. The sensor chip, based on an insulated silicon base, is connected directly to pins without using bonding wires, allowing it to be used in high-vibration and high-temperature environments. There are hundreds of standard models available, and thousands of types of sensor elements. In addition to standard products, we also accommodate special specifications tailored to applications, so please feel free to consult us.