ハイダック Product Lineup

The product is a hydraulic accumulator equipped with a flexible bladder rubber. It consists of a welded and forged pressure vessel, accumulator bladder, and valve (gas side), with fluid connections. The bladder serves to separate the "liquid part" and the "gas part." In addition to standard products, we also offer special specifications for accumulators. We can accommodate applications with particularly high flow rates (over 100L/second) and high pressures (over 1000 bar). 【Features】 ■ Equipped with flexible bladder rubber ■ Can be installed vertically, horizontally, or at an angle ■ Can be directly connected to piping using appropriate adapters (up to size 1L) *For more details, please refer to the PDF document or feel free to contact us.

• others

The HYDACLab HLB 1300 series is a multifunctional sensor that allows real-time observation of the operating fluid's condition in hydraulic systems. If there is any change in the fluid's state, it sends the latest data to the user, enabling immediate response in case of deteriorating operating conditions. By monitoring temperature, relative humidity, and dielectric constant, it can detect oil degradation and contamination by different oils at an early stage, alerting the user through analog signals or warning alarms. Its compact design makes installation easy. It is compatible with HLP mineral oil (HLP-D available upon request) and esters (HEES, HETG).

• Hydraulic Equipment

Modularization of components and systems in cooling systems. HYDAC is introducing testing equipment and manufacturing facilities based on technical design to adapt to vehicle machinery. 【Products】 ● Oil/Air Coolers (up to 1000 kW) ● Oil/Water Coolers (up to 500 kW) ● Fluid/Air Cooling Systems ● Coolers with Pumps and Filters ● Bell Housings with Oil/Air Coolers

• Cooling system

The Haiduck FluidControl Unit FCU 1000 series is a product that combines the measurement technology of the contamination sensor CS 1000 with the portable characteristics of the FCU 2000 series. The FCU 1000 is a convenient portable unit that can be used for on-site measurement of cleanliness in hydraulic systems. FCU 1000 set contents: built-in pump, hose, and AC adapter.

• Hydraulic Equipment

Components, modules, subsystems, drive units, and electronic control devices are supported by: ● Manufacturing with the latest production equipment ● Development using cutting-edge technology ● Inspection and trial operation under harsh conditions ● Field testing ■ Various valve products using cartridge technology, pressure and flow control, shut-off valves, one-way valves, leak-free directional control seat valves, and proportional valves: standard sizes 1 to 20 ■ Solenoid valves with specially developed and applied solenoid systems are highly efficient and have high pressure resistance. ■ Compact power units and drive units for medium to high pressure.

• Other pumps
• valve
• Pipe Fittings

The automatic backwash filter RF4 is a fully automatic filter equipped with a self-cleaning function that separates fine particles from low-viscosity fluids. This filter allows for continuous operation without hindering filtration performance even during the automatic backwashing process. ● Fully automatic operation ● Maintenance-free ● Optimal backwashing with conical elements ● Compact design

• Hydraulic Equipment

Portable and installed units: They separate contamination from hydraulic oil, lubricating oil, emulsions, liquids, gases, and solids. They extend the maintenance period and lifespan of equipment. They inspect, analyze, and diagnose the hydraulic conditions during the initial stages of equipment status and during modifications to machines and systems, and store that data. <Product> ◆ Gas Charging Unit ◆ Offline Unit OLF ◆ Automatic Filtration Unit ◆ Moisture Removal Device FAM ◆ Particle Measurement Unit FCU ◆ Contamination Sensor CS ◆ Oil Degradation Sensor ◆ Contamination Test Unit CTU ◆ Water Sensor AS ◆ Digital Analysis Unit ◆ Portable Data Recorder ◆ Sampling Unit ◆ Measurement and Analysis Kit

• Hydraulic Equipment
• Oil-water separator
• Filtration Equipment

Components with EMC characteristics, sensor electronic measurement technology systems, analysis, diagnosis, control, adjustment, solenoid technology. Provision of not only standard products but also customized products, and system development for control and adjustment. Hardware and software developed from years of practical experience, development and production facilities. 【Product Range】 ● Measurement Technology Pressure sensors, electronic pressure switches, temperature switches, temperature transmitters, flow sensors, electronic level switches, oil condition sensors, moisture sensors, displacement sensors, position detection sensors, portable data recorders (for hydraulic system diagnosis), proportional control amplifiers. ● Solenoids On-Off/Proportional solenoids, explosion-proof solenoids. ● Automotive Technology Valves, systems.

• Electrical Instruments/Electrometers
• Pressure Control
• Sensors

This is a filtration device designed for various industries that operate continuously and requires no maintenance (no filter replacement). When contaminants accumulate on the element, it automatically initiates backwashing. The filtration efficiency of the filter is not affected during backwashing. It significantly enhances system reliability and contributes to reducing operating and maintenance management costs.

• Other machine tools
• Hydraulic Equipment
• Other Auto Parts

We provide optimal advice for all applications by offering a complete range of systems and components for all types of hydraulic accumulators (bladder, piston, diaphragm, hydraulic dampers). HYDAC accumulators are manufactured and shipped with approvals in accordance with the regulations and pressure vessel guidelines of each country. = Product Lineup = Bladder accumulators / Piston accumulators / Diaphragm accumulators / Metal bellows accumulators / Pulsation dampers / Suction flow stabilizers / Shock absorbers / Silencers / Safety shut-off / Blocks / Charging and testing units / Operating condition monitoring / Nitrogen filling units / Accumulator supports / Accumulator stations / Accumulator sets

• Hydraulic Equipment
• Other FA equipment

Compact design allows for easy movement even in tight spaces. ● Can be easily moved and used anywhere (within factories, on-site, etc.) ● Compatible with various hydraulic oils ● Optional contamination sensors can be installed, allowing for use while managing the condition of the oil ◆ Main Specifications ◆ Flow rate: 20 liters/min Weight: 100 kg

• Other machine tools
• Oil-water separator
• Filtration Equipment

High and low viscosity fluids, corrosive fluids, gases, components and elements for separating them, and their systems. HYDAC's products are manufactured based on unique manufacturing methods, CAD systems validated through lab tests and research, as well as test equipment developed for process technology. 《Products》 ■ Stainless steel inline filters ■ Stainless steel filter elements ■ Lubrication/cooling water, automatic backwash water for filtration ■ Cooling stations/cutting fluids

• Other process controls
• filter
• Piping Materials

Filtering and defoaming of liquids, gases, and solids. Filters and filtering systems for mineral oils, fire-resistant oils, biodegradable oils, and other substances used in lubricants and hydraulic fluids. HYDAC filter products meet the following market needs: - High particle separation across a wide pressure range - Low pressure drop during cold starts - High pressure resistance - High contamination retention and long replacement cycles - Compact filter design - Equipment-specific housing - Lightweight design

• Filtration Equipment
• Other physicochemical equipment