テクノフレックス List of Products and Services

The "RD Reinforced Ring Type Double (for High Pressure)" is a bellows-type expansion joint used for high-temperature water, high-pressure steam, oil transfer pipes, and more. It is suitable for absorbing large displacements that cannot be accommodated by the single RS type. Additionally, since the double type may require the installation of intermediate supports, standard support dimensions have been established. 【Specifications】 ■ Manufacturing range: 40A to φ5000 ■ Expansion direction: Axial ■ Operating pressure: Vacuum to 20Mpa *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "LS Guide Bolt Type Single Expansion Joint" is a bellows-type expansion joint designed for use under vacuum to 1.0 MPa pressure. There is a risk of damage to fixed points and other components due to unexpected loads caused by abnormal pressure from malfunctions. To address this, the expansion joint itself is equipped with guide bolts to absorb unexpected loads, thereby preventing damage to fixed points and other components. 【Features】 ■ The expansion joint itself is equipped with guide bolts to absorb unexpected loads. ■ A structure that prevents damage to fixed points and other components. ■ The pipe expands and contracts due to changes in fluid temperature and ambient temperature. ■ Thin plates are layered multiple times to increase pressure resistance without affecting the expansion and contraction operation. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "LD Guide Bolt Type Double Acting" is a bellows-type expansion joint that allows for expansion in both the axial and perpendicular directions. As the operating pressure increases, the shape of the bellows changes. While increasing the thickness of the material can prevent this, it restricts the expansion movement. Therefore, multiple layers of thin material are stacked to increase pressure resistance without affecting the expansion movement. 【Features】 - Multiple layers of thin material are stacked to increase pressure resistance. - Suitable for absorbing large displacements that cannot be accommodated by a single acting type. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "HS Hinge Single Type (Low Pressure)" is a bellows-type expansion joint that can absorb larger displacements than a universal type by combining two or three hinge types. By using hinge arms mounted on the sides of the bellows and a central pin to restrain the internal pressure thrust, it absorbs angular displacement by bending the bellows around the pin. Additionally, we also offer the "HD Hinge Type Double (Low Pressure)." 【Features】 ■ By combining two or three hinge types, it can absorb larger displacements than a universal type. ■ By extending the intermediate pipe, larger lateral displacement Y can be achieved. ■ It can also be combined with a gimbal type. *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "Hinged Type Single HS/Dual HD" is a bellows-type expansion joint that can absorb large displacements caused by earthquakes and other events through its combinations. The hinged type restrains internal pressure thrust with a hinge arm attached to the side of the bellows and a central pin, allowing the bellows to bend around the pin to absorb angular displacement. By combining two or three hinged types, it can absorb larger displacements than a universal type. 【Features】 ■ Capable of absorbing large displacements caused by earthquakes and other events through combinations ■ Absorbs angular displacement by bending the bellows around the pin ■ By extending the intermediate pipe, larger lateral displacement Y can be achieved ■ Can also be combined with gimbal types ■ Pressure: 0.2MPa to 0.8MPa *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings

The "Gimbal Type Single GS/Dual GD" is a bellows-type expansion joint capable of absorbing large displacements that occur in various directions due to its combination. The gimbal type, like the hinge type, restrains internal pressure thrust. Unlike the hinge type, it can angle displace in various directions. It is suitable for applications such as steam pipes, hot and cold water piping, high-pressure steam pipes, hot water piping, and high-pressure gas pipes. 【Features】 ■ Capable of absorbing large displacements in various directions through combinations ■ Restrains internal pressure thrust like the hinge type ■ Angles displace in various directions unlike the hinge type ■ By combining two gimbal types with one hinge type, it can absorb large displacements in various directions *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "GS Gimbal Single (High Pressure)" is a bellows-type expansion joint that restrains internal pressure thrust and allows angular displacement in various directions. By combining two gimbal-type joints and one hinge-type joint, it can absorb large displacements in various directions. It is used in steam pipes, chilled and hot water piping, high-pressure steam pipes, hot water piping, high-pressure gas pipes, and more. Additionally, we also offer the "GD Gimbal Double (High Pressure)." 【Features】 ■ Restraints internal pressure thrust ■ Allows angular displacement in various directions ■ By combining two gimbal-type joints and one hinge-type joint, it can absorb large displacements in various directions *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

We handle the bellows-type expansion joint "BS Straight Pipe Balance Type (S Shape)." The pressure ranges from 0.2 MPa to 10 MPa. It absorbs axial expansion and contraction of the piping without generating thrust due to internal pressure. It is suitable for applications such as oil delivery pipes, air ducts, and steam pipes, with diameters available from 100A to 600A. 【Features】 ■ Manufacturing range: 50A to Φ4000 ■ Expansion direction: Axial ■ Operating pressure: 0.2 MPa to 10 MPa *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

We handle the bellows-type expansion joint 'BT Straight Pipe Balance Type (T-shape)'. It is suitable for places with dimensional restrictions. The operating side bellows and the balance side bellows are connected by an L-shaped crank arm, which cancels out the internal pressure thrust. The pressure ranges from 0.2 MPa to 10 MPa, making it suitable for applications such as oil delivery piping, air supply piping, and steam piping. 【Features】 ■ Manufacturing range: 100A to Φ1500 ■ Expansion direction: Axial ■ Operating pressure: 0.2 MPa to 10 MPa *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings

We handle the bellows-type expansion joint "BL Curved Pipe Balance Type (L Shape)." The pressure range is from 0.2 MPa to 10 MPa. It is used at the bends of piping and absorbs axial expansion and displacement in the axial perpendicular direction. It is suitable for applications such as air ducts, crossover pipes, oil supply piping, and connections to spherical tanks. 【Features】 ■ Manufacturing range: 50A to Φ4000 ■ Expansion direction: Axial / Perpendicular to axis ■ Operating pressure: 0.2 MPa to 10 MPa *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Technoflex, we handle the bellows-type expansion joint "RE Rectangular Bellows." It is used for displacement absorption in rectangular piping such as flues, ducts, and blower outlets. For absorption of variations in the axial perpendicular direction, we can also manufacture a multi-type. The pressure range is -0.05MPa to 0.2MPa. 【Features】 ■ Manufacturing range: 300 to 10000 ■ Expansion direction: Axial / Perpendicular to axis ■ Operating pressure: Vacuum to 0.3MPa *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings

The T610 is a fluororesin hose with a flange-type straight tube specification. It features a stainless steel braid attached to the outer layer of a flat PTFE tube, with flange fittings connected. The flange seating surface is integrated with the main tube in a flare shape, ensuring that all contact parts are made of PTFE. Additionally, it is non-stick, making cleaning easy. 【Features】 ■ Excellent chemical resistance ■ Excellent heat and cold resistance ■ Excellent weather resistance ■ Excellent electrical insulation ■ No liquid pooling, allowing for smooth liquid flow *For more details, please refer to the PDF materials or feel free to contact us.

• hose

The T620 is a fluororesin hose with a screw-type straight tube design. It features a stainless steel braid attached to the outer layer of a flat inner PTFE tube, allowing for the connection of various screw fittings. By selecting a connection fitting that consists of a bag nut and an adapter as a pair, piping connections can be made without rotating the hose itself. The flat inner surface prevents liquid pooling, allowing for smooth liquid flow. 【Features】 - Installation of a full reinforcement spring is possible to prevent excessive bending and kinking. - A braid is attached to the outside of the straight hose. - Compatible with various screw standards. - Connection fittings consisting of a bag nut and an adapter can be selected. - No liquid pooling, allowing for smooth liquid flow. *For more details, please refer to the PDF document or feel free to contact us.

• hose

The outer layer of the pliable tube, which has a spiral wave pattern, is fitted with a stainless steel braid, and a flange fitting is connected. <T630 Features> ◆ The flange seat surface is integrated with a flare shape, so all contact parts are PTFE! ◆ Increased flexibility with a pliable hose! ◆ Equipped with a blade to accommodate repeated bending and displacement absorption! ◆ Smaller radius compared to straight hoses! ◆ Strong against repeated bending! <Properties of Fluororesin Hoses> ◆ Excellent chemical resistance! ◆ Ideal for food lines, pharmaceutical lines, purification, and pure water systems! ◆ Excellent heat and cold resistance! (Approximately -50 to +200°C) ◆ Easy to clean! ◆ Excellent weather resistance! ◆ Excellent flexibility! ◆ Excellent electrical insulation! ◆ Excellent flame retardancy! ◆ Excellent low friction properties! ◆ Excellent safety! For more details, please contact us.

• hose

The T640 is a fluororesin hose with a screw-type pliable specification. It has a small bending radius and is capable of repeated bending and displacement absorption. A stainless steel braid is attached to the outer layer of the spiral wave-processed pliable tube, allowing for the connection of various screw fittings. The connecting fittings use tapered threads for ISO pipes and NPT threads, among others. If you select a connecting fitting with a bag nut and adapter as a pair, you can connect the piping without rotating the hose body. 【Features】 ■ Reinforced blade on the outside of the pliable hose ■ The tube is spiral wave-processed (pliable), providing flexibility ■ Smaller bending radius compared to straight hoses ■ Strong against repeated bending ■ Option to select connecting fittings with a bag nut and adapter as a pair *For more details, please refer to the PDF document or feel free to contact us.

• hose

The T650 is a fluororesin hose with a sanitary flange type. It is equipped with a stainless steel braid on the outer layer and connects to sanitary flange/ferrule fittings. We offer "straight tubes" for applicable tube SB and "pliable tubes" for applicable tubes WCO, WCV, and BCV. Please use "straight tubes" and "pliable tubes" according to your application. It is also possible to install a full reinforcement spring to prevent excessive bending and kinking. 【Straight Tube Specifications】 ■ Diameter: 15A to 32A ■ Applicable Tube: SB ■ Connection Fittings: Sanitary Ferrule, etc. ■ Connection Fitting Material: Stainless Steel, etc. *For more details, please refer to the PDF document or feel free to contact us.

• hose

The T670 is a fluoropolymer hose with a flange-type PTFE insert. A straight PTFE tube is inserted inside a flange-type stainless steel flexible metal hose. Since the flange seat surface has a flare shape integrated with the main tube, all parts in contact with the fluid are made of PTFE, making it suitable for highly corrosive chemicals and hazardous material piping. 【Features】 ■ Fluid contact parts are made of fluoropolymer ■ PTFE straight hose is inserted into stainless steel flexible hose ■ Flange seat surface has a flare shape integrated with the main tube ■ Suitable for highly corrosive chemicals and hazardous material piping *For more details, please refer to the PDF document or feel free to contact us.

• hose

The "VNW" is a flexible metal hose with a clamp flange type. The thermal stress at the tube and flange welds is removed by vacuum annealing. It can be easily attached and detached without using bolts or nuts. It comes as a set with a flange, clamp, and centering ring (with O-ring). 【Features】 ■ Easy attachment and detachment without using bolts or nuts ■ Set includes flange, clamp, and centering ring (with O-ring) ■ Thermal stress at the tube and flange welds is removed by vacuum annealing *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "VGF" is a flexible metal hose with a vacuum flange type (JIS). It complies with JIS standards and can accommodate low to high vacuum. The standard model has a fixed VG and a rotating VF. If you wish to fix the VF side, please indicate that. 【Features】 ■ Standard model has a fixed VG and a rotating VF ■ Vacuum flanges are VG and VF ■ Flange standard: JIS B 2290 Vacuum Flange ■ Complies with JIS standards ■ Can accommodate low to high vacuum *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "VCF" is a flexible metal hose with a conflat flange type. It features a metal gasket specification, with one side fixed and the other side rotating. It can also be used for ultra-high vacuum applications. We offer both soft and hard types in our lineup. 【Features】 ■ Can be used for ultra-high vacuum applications ■ Metal gasket specification ■ One side fixed, one side rotating *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

"VIS" is a flexible metal hose with a vacuum flange type (ISO). The ISO flange is a standard flange of ISO-KF. It connects with a cloak clamp and an outer ring (or a center ring). It is mainly suitable for connecting large-diameter vacuum lines and is used for equipment connections. 【Features】 ■ Connects with a cloak clamp and an outer ring (or a center ring) ■ ISO flange is a standard flange of ISO-KF ■ Mainly suitable for connecting large-diameter vacuum lines and used for equipment connections *For more details, please refer to the PDF document or feel free to contact us.

• hose

The "VNWB" is a flexible metal hose for vacuum piping with a clamp flange blade specification. The helium leak rate is below 5×10^-8 Pa·m³/s. The maximum manufacturing length is 3000 mm. It can be attached and detached without the use of bolts and nuts. 【Material】 - Easy attachment and detachment without bolts and nuts - Helium leak rate: below 5×10^-8 Pa·m³/s - Maximum manufacturing length: 3000 mm *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

The "VPA" is a pipe-end type flexible metal hose. It is Type A without a braid. It can be installed using fittings such as swage locks or pipe joints. The final process involves vacuum annealing, which reduces residual gas. The material is 316L stainless steel for both the tube and pipe. 【Features】 ■ Can be installed using fittings such as swage locks or pipe joints ■ Without a braid (Type A) ■ Residual gas is reduced due to vacuum annealing in the final process *For more details, please refer to the PDF document or feel free to contact us.

• hose

"VPB" is a flexible metal hose with a pipe end type blade specification. It is of type B with a braid, and the vacuum annealing performed in the final process reduces residual gas. It can be installed with fittings such as swage locks and pipe joints. If you require polished products (Ry0.6μ or less), please include TP (Technopolish) in the model number. [Features] ■ With braid (Type B) ■ Can be installed with fittings such as swage locks and pipe joints ■ Reduced residual gas due to vacuum annealing performed in the final process *For more details, please refer to the PDF materials or feel free to contact us.

• hose

The "VPA(B)-JCR" is a flexible metal hose with a pipe end (braid specification) and a joint connection type. There are two types: Type A without braid and Type B with braid. Additionally, we offer three variations: male at both ends (MM), female at both ends (FF), and male-female (MF). Metal gasket seal joints from various manufacturers can be installed. 【Features】 ■ Type A without braid, Type B with braid ■ Three types: male at both ends (MM), female at both ends (FF), and male-female (MF) ■ Compatible with metal gasket seal joints from various manufacturers ■ Metal gasket specification *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

We handle the vacuum piping flexible product "VPA-TP Pipe End Type Inner Surface Polished Product." It is possible to polish the peaks and valleys of the tube's inner surface. The material of the tube is 316L SS, and the material of the pipe is 316L SS (vacuum double-melt material). Additionally, the inner surface roughness is Rz 0.6μ or less. Please feel free to contact us when you need assistance. 【Features】 ■ Suitable for polishing the peaks and valleys of the tube's inner surface ■ Inner surface roughness Rz 0.6μ or less ■ Helium leak rate: 5×10-9 Pa·m3/s or less ■ Standard dimensions: 200, 300, 400 (mm) ■ Material: Tube 316L SS, Pipe 316L SS (vacuum double-melt material) *For more details, please refer to the PDF document or feel free to contact us.

• Vacuum Equipment

The "VBN/VBF/VBC/VBP" is a molded bellows for vacuum piping that combines low reaction, long lifespan, and high cleanliness. The "VBF" is a vacuum flange type, with the tube made of 316L SS and the flange made of 304 SS. In addition to the clamp flange type "VBN," we also offer three other types of molded bellows: "VBC" and "VBP." 【Product Lineup】 ■ VBN Clamp Flange Type ■ VBF Vacuum Flange Type ■ VBC Conflat Flange Type ■ VBP Pipe End Type *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

At Technoflex, we handle vacuum piping components, specifically the 'CFP Clamp Flange'. We offer various vacuum fittings compliant with JIS/ISO standards. Available in three types: KF/NW 20mm (S), 30mm (L), and 50mm (LL). Please feel free to contact us for inquiries. 【Features】 ■ Various vacuum fittings compliant with JIS/ISO standards ■ Three types available: KF/NW 20mm (S), 30mm (L), and 50mm (LL) ■ Elastomer seal *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Technoflex, we handle vacuum piping components, specifically the 'BFP Blank Flange.' This product serves as a flange to close off NW fittings and is compatible with nominal diameters ranging from KF/NW 10 to 250. Please feel free to contact us if you have any inquiries. 【Features】 ■ Flange for closing NW fittings in vacuum piping ■ Compatible with nominal diameters from KF/NW 10 to 250 *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Technoflex, we handle vacuum piping components called "CF Conflat Flanges." We offer four types: fixed, rotating, Kirianna, and tapped types. Since all joints are made of metal, high-temperature baking is possible. Please feel free to contact us when you need assistance. 【Features】 ■ Four types of flanges (fixed, rotating, Kirianna, tapped) ■ Copper packing seal ■ High-temperature baking is possible due to all-metal joints *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Technoflex, we handle vacuum piping components called 'VG/VF Vacuum Flange Type.' These cover a range from low vacuum to high vacuum areas. They are flanges with dimensions and quality specified by the JIS standard (JIS B 2290). Additionally, we also offer blank flange types. Please feel free to contact us when you need assistance. 【Features】 ■ Elastomer seal ■ Flange without O-ring groove (VG) ■ Flange with O-ring groove (VF) ■ Low vacuum to high vacuum range *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Technoflex, we handle vacuum piping components, specifically the 'ISO-K/ISO-F flanges.' We offer two types: clamp type and bolt type. These are vacuum fittings compliant with ISO1690. Additionally, we also have blank flange types available. Please feel free to contact us when you need assistance. 【Features】 ■ Vacuum fittings compliant with ISO1690 ■ Elastomer seal ■ ISO-K/MF: Clamp type flange ■ ISO-F/BT: Bolt type flange *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components, specifically the 'COP Center Ring.' The materials used are 316L stainless steel and fluororubber, and we offer various diameters. In addition, we provide four types of gaskets, including the "AUT Center Ring with Outer Ring," "COP-M Center Ring with Mesh," and "OR O-Ring." 【Product Lineup】 ■ COP Center Ring ■ AUT Center Ring with Outer Ring ■ COP-M Center Ring with Mesh ■ OR O-Ring *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components called "CLP Clamps." They are used for connecting KF/NW fittings. The main body material is aluminum. We also offer "CLP Chain Type Clamps" for connecting large diameter KF/NW fittings, as well as "CLP-SS Stainless Clamps" and "CLP-BH Bulkhead Clamps." 【Features of CLP Clamps】 ■ Stainless butterfly nuts are also available ■ Used for connecting KF/NW fittings ■ The main body material is aluminum *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components called 'CLW Cloak Clamps.' These are used for connecting ISO-MF fittings. We offer options in aluminum and stainless steel materials. The "CLW-AL Cloak Clamp Double-AL" is also available in a single type. Please feel free to contact us when placing an order. 【Product Lineup】 ■ CLW-AL Cloak Clamp Double-AL ・ CLW-AL-08 ・ CLW-AL-10 ■ CLW-SS Cloak Clamp Double-SS ・ CLW-SS-10 *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At TechnoFlex Co., Ltd., we handle the vacuum piping component 'RP Reducer'. It can be used for connecting different diameter fittings, is clean, and has a smooth inner surface. It is a fitting that does not require bolts or nuts and is easy to attach and detach. We also manufacture special reducers. Please feel free to contact us when you need assistance. 【Features】 ■ Used for connecting different diameter fittings ■ NW/KF conversion fitting ■ No bolts or nuts required ■ Easy to attach and detach ■ Clean and has a smooth inner surface *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components called 'GP Gauge Ports.' These fittings are designed for installation in piping for vacuum gauges and vacuum chambers, featuring a clean and smooth inner surface. They do not require bolts or nuts, making attachment and detachment easy. End caps are available as an option, and we can also manufacture various flange mounting types. Please feel free to contact us when placing an order. 【Features】 ■ No bolts or nuts required, easy to attach and detach ■ Clean and smooth inner surface ■ Two types available ■ Custom flange mounting types can be produced ■ End caps are optional *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components called 'LP Elbow'. They are clean, have a smooth inner surface, and do not require bolts or nuts, making them easy to attach and detach. In addition, we offer four types of piping and branch pipes, including "TP Tee," "XP Cross," and "NP Nipple." Please feel free to contact us when you need assistance. 【Features】 ■ No bolts or nuts required ■ Easy to attach and detach ■ Clean with a smooth inner surface ■ Four types of piping and branch pipes available *For more details, please refer to the PDF document or feel free to contact us.

• Pipe Fittings

At Techno Flex Co., Ltd., we handle vacuum piping components called "Adapters." These fittings are clean, have a smooth inner surface, do not require bolts or nuts, and are easy to attach and detach. We offer three types of NW/KF flange adapters, including "Flange Adapters," "Pipe Adapters," and "Metal Seal Joint Adapters." 【Features】 ■ No bolts or nuts required ■ Easy to attach and detach ■ Clean and smooth inner surface *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings

Special gases used in the manufacturing of semiconductors and FPDs have the property of oxidizing and nitriding as the temperature decreases. Therefore, if they are not discharged while maintaining a certain temperature in the piping that sends them to the exhaust gas treatment system after use, solid residues from oxidation and nitridation will remain in the piping, blocking it. Technoflex's heater jacket system achieves temperature control in the piping equipment for such special gases at a low cost, contributing to the reduction of maintenance costs such as the effort required for pipe cleaning due to long-term operation. 【Features】 ○ The use of connectors makes it less likely to experience heating load and allows for disconnection measures! ○ Built-in thermal and temperature fuses enhance safety! ○ Sizes and lengths can be designed and manufactured according to your requirements to match the layout of piping, valves, and flexible equipment! ○ Easy attachment with Velcro is possible! ○ Two types are available: one with a built-in thermocouple and one without! ○ We can also accommodate integrated construction up to heater installation! ● For other functions and details, please contact us.

• Other process controls

"SP-X" is a hose connector for fire extinguishing equipment. The exterior braid suppresses the elongation and deformation of the tube, ensuring that the flexible body does not stretch significantly even when subjected to external forces such as shock pressure during sprinkler activation or pressure increases due to temperature changes in the external environment. It maintains the initial piping shape, allowing for construction and management in accordance with the "Guidelines for Seismic Measures for Sprinkler Equipment." 【Features】 ■ Equipped with a non-deforming braid ■ Flexible and resistant to repeated bending ■ Anti-rotation mechanism ■ Rotating nipple mechanism ■ Passed easy heat resistance tests ■ Recommended by the Fire Safety Center *For more details, please refer to the PDF materials or feel free to contact us.

• Pipe Fittings
• Piping Materials

The "Sprinkler Flex / SP-SF" from Techno Flex Co., Ltd. significantly improves the installation of piping connections due to its rotating nipple structure. It meets the lightweight heat resistance test standards of Fire Department Notification No. 31, allowing it to be installed in various locations. Additionally, it not only prevents melting or deformation due to fire but also maintains the water stop performance of the rotating nipple even during temperature increases caused by fire. We have newly adopted the "Silent Bellows," which is less prone to resonance (bellows fatigue) during the operation and discharge of the sprinkler head. This helps in building a safer sprinkler system. 【Features】 ■ Rotating nipple structure ■ Passed lightweight heat resistance test ■ Adoption of silent bellows *For more details, please refer to the catalog or feel free to contact us.

• Pipe Fittings

Cost reduction in building equipment is essential, and fire protection piping systems are no exception. The SP-2 type has evolved from the conventional flexible piping, born with the concept of "keeping performance the same while making it simpler." ◆◇◆Features◆◇◆ ◆All stainless steel The connecting fittings are made of SUS304 steel. The flexible part of the main body is made of SUS316 steel, and the connecting fittings at both ends are made of SUS304 steel. It is ideal for dry and pre-action piping. ◆High corrosion resistance It is assembled using TIG welding, which is most suitable for stainless steel connections. Additionally, the entire product undergoes heat treatment, ensuring reliable corrosion resistance. ◆Simplicity To achieve weight reduction, the exterior braid has been removed. Furthermore, there is only one connection point for the piping, which allows for a reduction in construction inspection time. ◆JWWA certified product Compatible with fire protection systems branching from water supply piping. A certified product means that it has been inspected by a third-party inspection organization, the Japan Water Works Association, based on the specifications of the relevant business operator and is provided to customers as compliant. ◆◇◆For more details, please request documentation or download the catalog◆◇◆

• hose