日本ビジネスロジスティクス（JBL） Product Lineup

Our company conducts corner drop tests on pallets in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS standard tests, where the same corner of the pallet is dropped three times from a height of 50 mm, after which the diagonal length of the pallet is measured to check for changes in rate. While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivided test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF document.

Our company conducts shear impact tests on pallets in accordance with the testing methods specified in ISO 8611. This test examines the resistance of the top and bottom deck boards, which are joined to the beams and blocks, when subjected to opposing impact forces (shear impact forces). While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, with each group further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF document.

Our company conducts bottom deck bending tests on the pallets listed below in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS test, where a concentrated load is applied at the center span of the bottom deck board; however, the shape of the compression material differs slightly from the JIS standards. Additionally, while the JIS Z 0602 pallet test specifies only four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivided test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.)

Our company conducts stacking tests for pallets in accordance with the testing methods specified in ISO 8611. This test is designed to assess the effects of loads applied to the span of the top and bottom deck boards of pallets that are stored in a stacked configuration. While the JIS Z 0602 pallet testing only specifies four test items, ISO 8611 is broadly categorized into the following three groups, each with further subdivisions of test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials (recommended).

Our company conducts compression tests for the legs of the pallets listed below in accordance with the testing methods specified in ISO 8611. This test is similar to the JIS test, but there are slight differences, such as the size of the material used for top compression. Additionally, while the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, with each group further subdivided into specific test items. 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials.

Our company conducts fork lifting tests on the pallets listed below in accordance with the testing methods specified in ISO 8611. This test simulates the scenario of lifting single-faced pallets or single-use pallets with full-entry openings using a fork. While the JIS Z 0602 pallet tests only specify four test items, ISO 8611 categorizes them into the following three main groups, each of which is further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF.

Our company conducts bending strength tests on pallets in accordance with the testing methods specified in ISO 8611. This test is similar to the bending test in JIS, but the pallet support methods and overload conditions differ from those in JIS. Additionally, while the JIS Z 0602 pallet test specifies only four test items, ISO 8611 is broadly categorized into the following three items, each of which is further subdivided into specific test items: 1. Nominal load tests (Top/Bottom Bending, Forklifting, Compression for Block, Stacking, etc.) 2. Maximum working load tests (Top/Bottom/Airbag Bending, Forklifting, Stacking, etc.) 3. Durability tests (Static shear, Corner drop, Shear/Block/Top deck edge impact, etc.) ▼ For more details, please download the PDF materials (recommended).

We evaluate how much packaged goods can withstand compressive loads that occur during storage in warehouses and logistics centers. In this contracted testing service, we reproduce the compressive loads caused by stacking during warehouse storage using a compression testing machine. ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us using the "Contact Us" section below.