サクラテック Product Lineup

This is an impulse generator that generates very narrow pulse width impulse waves synchronized with the repetition period of the input trigger pulse. <Features> ■ There is minimal vibration associated with the impulse. The polarity of the impulse can be specified as either positive or negative. ■ Output pulse voltage: 0.5V 0-p min. (Load impedance 50Ω) ■ Output pulse width: minimum approximately 50ps to maximum 1ns (can be specified to any pulse width) ■ The output is standard unbalanced output. Differential output (LVDS, ECL) can also be specified. ■ The input trigger repetition frequency ranges from 1MHz to 10GHz, with unbalanced input and interfaces available for LV-TTL (1MHz to 100MHz) and ECL (unbalanced: 1MHz to 10GHz). ■ Standard power supply voltage: DC +12V ■ Implemented in an aluminum case to reduce noise radiation. ■ It is possible to adjust the pulse width and output voltage according to the application before shipment. (Optional) Custom products can be accepted from a single unit. *For more details, please contact us.

This is a frequency divider that outputs signals at frequencies divided from a microwave. It contains four dividers internally, allowing for changes in the input-output division ratio through combinations of division ratios (optional). There is also a high-speed version with a rise and fall time of 100 ps (typ.). <Features> ■ Input frequency range: up to 15 GHz. ■ Standard division ratios are 512, 1042, and 2048, but others can also be specified. ■ Outputs include intermediate division ratio output (unbalanced) and final output (unbalanced or differential), with the final output being selectable as either unbalanced or differential. ■ The rise and fall time of the output signal is several ns for the standard (LV-CMOS output), but there is also a high-speed version with 100 ps (typ.). ■ Standard power supply voltage: DC +12V. ■ Mounted in an aluminum case, making it resistant to noise. ■ Shipped with division ratios according to application. Custom products can be accepted from a single unit. *For more details, please contact us.

This is a highly user-friendly AD converter unit with a high-speed USB interface IC built-in for data transfer to FPGA and PC for signal processing, resulting in low load on the PC and high speed. <Features> ■ Analog Input: 2 channels ■ Resolution: 14 bits ■ Analog Signal Bandwidth: Up to 10 MHz Maximum Analog Signal Input: ±1 V ■ Sample Rate: Standard 0.5M sps to 20M sps Number of Sampling Points: 32K points ■ External Trigger/Internal Trigger function and trigger delay time setting function included. ■ Processing Functions Averaging function using FPGA, Az/El encoder counter function, etc. ■ Data transfer to PC via USB Transfer speed: Up to 16 Mbytes/s USB Interface IC: FTDI FT2232H (Hi-speed compatible) ■ Can be powered via USB, making it easy to handle ■ Compact unit, suitable for integration into devices ■ Suitable for research prototype development *For more details, please contact us.

This is a multiplier that multiplies the reference signal by 512 or 1024 and outputs it. It has three multipliers (for 512) or four multipliers (for 1024), and each multiplier can be combined from 2x to 8x (optional). The input signal is TTL, making the interface easy. 【Features】 Input Frequency: 10MHz (specifiable) Level: TTL (LV-TTL, LV-CMOS can be specified) Output 1 Frequency: 80MHz (×8) Output Level: -9dBm to -4dBm Output 2 Frequency: 640MHz (×64) Output Level: -9dBm to -4dBm Output 3 Frequency: 5.12GHz (×512) or 10.24GHz (×1024) Output Level: -9dBm to -4dBm Signal Connector: SMA (female) Power Supply: +12V Dimensions: 100mm × 70mm × 8.5mm (excluding connectors and protrusions) *For more details, please contact us.

Specifications: Frequency Range: 3GHz - 6GHz Number of Output Ports: 4 Insertion Loss: 1.5dB or less Flatness: 1.0dB or less Minimum Isolation: 15dB Maximum VSWR: 1.5 (Return Loss 14dB) Power Handling: 1W Connector: SMA (F) Dimensions: L100mm × W70mm × H8.5mm *For more details, please contact us.

Performance: Frequency Range: 0.5 GHz - 6 GHz Number of Output Ports: 2 Insertion Loss: 1.5 dB or less Flatness: 1.0 dB or less Minimum Isolation: 0.5 GHz - 2 GHz 7 dB : 2 GHz - 6 GHz 15 dB Maximum VSWR: 0.5 GHz - 2 GHz 2.0 (Return Loss 9.4 dB or more) : 2 GHz - 6 GHz 1.4 (Return Loss 14 dB or more) Power Handling: 1 W Connector: SMA (F) *For more details, please contact us.

Specifications Frequency range: 3.4 GHz to 4.8 GHz Antenna gain: 4 dB typ. 3 dB beam width - E-plane: ±30° typ. - H-plane: ±60° typ. VSWR: 1.4 or less Connector: SMA (f) Dimensions: 50 mm x 40 mm x 0.8 mm (excluding connector) *For more details, please contact us.

We design low-pass filters, band-pass filters, and notch filters tailored to specifications starting from one unit. Functionality: This is a distributed constant filter constructed on a printed circuit board. It is compact and easy to implement. Performance: Pass frequency range: DC - 12 GHz Insertion loss: 1.5 dB or less Cut-off range: 16 GHz - 20 GHz Cut-off attenuation: 40 dB or more Reflection loss: 1.5 or less Input/output connector: SMA (female) *Please contact us for more details.

An external analog voltage can generate signals with frequencies ranging from 8 GHz to 12.5 GHz. We also offer a product that outputs this signal after doubling it twice. It has a built-in regulator to reduce frequency fluctuations caused by voltage variations. Additionally, it includes a filter to suppress second harmonics. Performance: Frequency Range: 8 GHz to 12.5 GHz (DsA034-0812) 18 GHz to 25 GHz (DsA034-1825) Tuning Voltage Range: 0.2 V to 13 V Output Level: +10 dBm or higher Second Harmonic Level: -30 dBc or lower Signal Connector: SMA (f) Tuning Voltage Connector: SMA (f) Power Supply Voltage: DC +12V *For more details, please contact us.

The "triangular pyramid corner reflector" is a reflector that can accurately reflect microwave/millimeter wave signals. It can be fixed to a camera tripod. Made of stainless steel, it does not rust. Additionally, we also offer a "spherical reflector" that can accurately reflect microwave/millimeter wave signals regardless of the angle. 【Features】 ■ Can accurately reflect microwave and millimeter wave signals ■ Can be fixed to a camera tripod ■ Made of stainless steel, so it does not rust *For more details, please refer to the PDF document or feel free to contact us.

The "Kasegurein Antenna" is a high-efficiency antenna that can cover frequencies from 26.5 GHz to 40 GHz (Ka band). It uses a high-precision reflector made from aluminum machining, resulting in low loss and high gain. It is suitable for radiometers, radar, and communication. 【Features】 ■ Covers 26.5 GHz to 40 GHz (Ka band) ■ Uses a high-precision reflector made from aluminum machining ■ Low loss and high gain *For more details, please refer to the PDF document or feel free to contact us.