パンドウイットコーポレーション日本支社 List of Products and Services

Panduit's Category 6A/6/5E UTP wiring solutions are highly reliable products that have gained overwhelming support in the domestic market, including data centers. They have a wealth of proven performance in data centers, offices, as well as for industrial and device applications.

• LAN/Optical cable
• LAN construction and wiring work
• Wiring materials

VHB tape is a strong adhesive tape with an acrylic adhesive that excels in weather resistance, heat resistance, and solvent resistance, applied to both sides of a flexible foam substrate. It can be used for extended periods in harsh environments, high temperatures, and outdoors. Additionally, it can adhere to a wide range of materials, including metal, glass, and plastic. The cable clip does not require zip ties or screws, making installation easy, while also contributing to cost reduction, increased productivity, and reduced burden on workers.

• Other Auto Parts
• Control Panel
• Solar power generator

VHB tape is a strong adhesive tape that has an acrylic adhesive with excellent weather resistance, heat resistance, and solvent resistance applied to both sides of a flexible foam substrate. It maintains strong adhesion under harsh environmental conditions, at high temperatures, and outdoors, allowing for long-term use. The adhesive surface is compatible with a wide range of materials, including metal, plastic, and glass.

• Control Panel
• Solar power generator
• Other Auto Parts

By creating a part that can rotate 360°, we have made it possible to separate the wiring from the fixtures. Traditionally, there was no room for securing the wiring in the opening and closing door section, which put stress on the cables, or there was too much slack, causing them to get pinched in the opening and closing parts. However, by using this movable fixture, you can maintain some slack while securely holding the cables. Additionally, the force is distributed against movement, which reduces the load on the fixture and prevents it from falling off. We have prepared two types of adhesive tape: standard and strong adhesive.

• Control Panel
• Beverage Production Equipment

This is a bundling strap that can securely split and fix two hoses, such as hydraulic, pneumatic, and gasoline hoses, preventing twisting and wear of each hose. The material is weather-resistant nylon 66, making it suitable for both indoor and outdoor use.

• Other consumables

Cable identification and bundling can be done simultaneously, which shortens the working time. The display section is available in two types: flag-type display and wrap-around display. In addition to indoor nylon 66, we also offer weather-resistant nylon 66 and flame-retardant nylon 66 (limited to certain sizes). Displays can be done using marker pens or engraving machines, and it is also possible to attach printed labels. We certainly have labels in the perfect size available.

• Other electronic parts
• Other markings
• Other consumables

This is a push-type cable tie that combines the elements of a cable tie and a fastener into one. Installation is simple, requiring just a push into the mounting hole. There are two types available: one with wings for more stable and secure fastening, and one without wings, ideal for installation in tight spaces. Additionally, there are three types of materials available: nylon 66 for indoor use, weather-resistant nylon 66 for outdoor use, and heat-resistant nylon 66 for continuous use in high-temperature environments.

• Other consumables
• Control Panel
• Wiring materials

Panduit's solar cable ties can be used in environments such as acid rain, coastal areas, and cold regions that use de-icing agents! In many cases, solar panels are installed on galvanized frames, but this galvanization can combine with various substances to produce zinc chloride. Commonly used nylon ties are very weak against zinc chloride and cannot maintain their performance, but Panduit's solar cable ties are made from materials resistant to zinc chloride, so you can use them with confidence. It's just a cable tie... but it's also a cable tie... If you choose the right one for your environment, you can use it safely for a long time. To avoid having to redo it in a few years, definitely choose Panduit's solar cable ties! We are currently accepting requests for free samples!

• Solar power generator
• Other consumables
• Wiring materials

The "Cable Tie Technology Handbook" is packed with information not only on cost reduction and improved workability but also on techniques to enhance reliability and quality through the proper use of cable ties. It includes guidance on selecting cable ties and fasteners that suit environmental conditions and applications, such as operating temperatures. This is an essential book for engineers and designers who use cable ties for tasks like harnessing and cable bundling. 【Overview】 ■ Cost reduction through improved workability of cable ties ■ Various types of cable ties ■ Characteristics based on the material of cable ties ■ Applications where cable ties are used ■ Key points for selecting and using cable ties and fasteners, etc. ◇◆For those who wish to receive the handbook◆◇ Please contact us via the [Inquiry Form] below. You can view a sample version in the "Catalog Download."

• others

Special material Tefzel tie wraps! They can be used in clean rooms. They excel in chemical resistance and UV resistance, and they also have excellent heat resistance. Maximum operating temperature is 170°C! They are UL94V-0 certified. There are also fasteners made of the same material available, allowing for both bundling and securing.

• Other clean room equipment and facilities
• Other electronic parts
• Other consumables

The "Metal Sensor Detectable Band & Fastener" is a tie wrap that contains metal components, which responds to metal detectors and is widely known as Panduit's "Metal Detectable Band." It complies with safety standards in the food and beverage manufacturing and pharmaceutical industries, making it easy to detect in the unlikely event that a part of the product breaks and contaminates. While it can be secured with various tying tools, using the "GT Series Tying Tools" ensures that the tip of the band is securely grasped during tightening and cutting, further preventing the occurrence and contamination of foreign objects. 【Features】 ■ Complies with safety standards in the food and beverage manufacturing and pharmaceutical industries ■ Easy to detect in the unlikely event that a part of the product breaks and contaminates ■ Suitable for building HACCP systems ■ Can meet EU food safety regulations ■ Adopts a clear and easily distinguishable blue color ■ Contains metal components that respond to metal detectors ~ Free Sample Giveaway Campaign ~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Other consumables

Limited time only! Site opening limited campaign! We are giving away the industry's only "LAN Cable Wiring Technology Handbook" for free to the first 100 applicants! (Not for sale) We have launched the industry's first technical information site "LANCableWiring.com" to ensure stable operation of data centers and server rooms. It is packed with information that helps strengthen Layer 1. Please take a look. ---------------------------------------------------------- Right now, we are giving away the handbook for free Please request it from the homepage of 'LANCableWiring.COM' below ---------------------------------------------------------- ↓ ↓ ↓

• LAN construction and wiring work
• Server Rack
• Other security

The mechanical connector, copper split bolt type SBC, is made of high-tensile electrical copper, allowing for highly reliable electrical and mechanical connections. The long body terminal can consolidate one or two conductors into one. No special tools are required; simply tightening the nut will secure the connection. The built-in wire holder enhances tensile strength and ensures a reliable connection. It is UL Listed and CSA approved for a maximum range of 600V. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• bolt

The manual compression tool (6 tons) features high quality and a robust design, allowing for reliable compression over a long period. It has a compression force of 6 tons and can compress terminals and splices up to 500 kcmil. The hydraulic manual compression tool (14 tons) has a compression force of 14 tons and can compress terminals and splices up to 750 kcmil. With a high-speed hydraulic compression system, it minimizes the number of strokes, reducing work time. The hydraulic electric compression tool is an electric type tool that allows for compression with just fingertip operation. It is a convenient all-in-one unit that is easy to carry. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

The copper splice has a die number displayed on the barrel to identify the compatible wire sizes and tools. It features an internal wire stopper to prevent over-insertion. It is UL Listed and CSA approved. It has been tested by TELCORDIA and meets NEBS Level 3 standards. It is also approved by the American Bureau of Shipping (ABS). To prevent rust, it is coated with tin plating. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

The compression terminals for copper wire have die numbers displayed on the barrel to identify the compatible wire sizes and the tools used. You can check through the hole in the barrel for wire confirmation to see if the wire is fully inserted. They are UL Listed and CSA approved. They have been tested by TELCORDIA and meet NEBS Level 3 standards. They are also approved by the American Bureau of Shipping (ABS). To prevent rust, they are coated with tin. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

A variety of tools designed for crimping Panduit's Pan-Ty are available. Ergonomically designed tools can reduce operator fatigue. The CT-100A comes with a bolt cutter that can cut screws. It can also cut and strip electrical wires. It is a convenient universal crimping tool that can be used for various applications. The CT-1550 has red/blue crimp pockets (for AWG 22 to 14) located near the center of the tool, making it easy to crimp, especially when frequently using the red/blue pockets. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

The Disco-Lok(TM) disco lock type female disconnect (fully insulated nylon) features a locking mechanism. It allows for easy insertion of tabs and provides a strong, secure lock, making it ideal for use in high-vibration environments. The terminals will not come loose even when wires are pulled or vibrated, but they can be easily removed by pulling on the housing. Additionally, the Supra-Grip(TM) supra grip type female disconnect (fully insulated nylon) is completely insulated. Its funnel insertion design makes wire insertion easy. The metal grip securely holds the insulation and serves as a strain relief. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

Pan-Term(TM) crimp terminals are grip insulated sleeves. The applicable wire sizes are as follows: AWG 26 to 22 has a maximum insulation outer diameter of φ2.3mm, AWG 22 to 18 has a maximum insulation outer diameter of φ3.7mm, AWG 16 to 14 has a maximum insulation outer diameter of φ4.1mm, and AWG 12 to 10 has a maximum insulation outer diameter of φ5.7mm. The ring type (nylon insulated) comes in yellow, red, and blue colors. The ring type (polyolefin insulated) features a metal sleeve with a butt seam. Colors available are red stripe, blue stripe, and yellow stripe. Additionally, fork type (nylon insulated) is also available. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Crimp Terminal

Nylon rivets and rivet installation tools can be used for all ducts. This is the most economical method for duct installation. They can also be used with snap clip brackets and mounting bases. The DCT duct cutting tool allows for smooth cutting of ducts and covers. It is handheld and allows for blade replacement. The finger cut tool can easily cut duct fingers one at a time, even in narrow spaces. It can also be used for the removal of NR1 nylon rivets. The horizontal bridge cut tool is used for cutting horizontal bridges of shielded wiring ducts. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools

The divider wall for the PanelMax(TM) wiring duct fixture is installed inside the duct to divide the interior of the duct. Installation is easy using the mounting base. The wire retainer type WR holds the wires in place while the cover is removed for work. It allows for easy expansion of the wiring. The duct coupling fitting for corners (for fiber) ensures a secure connection at the corner of the duct without bending too much. It features a radius that maintains the proper bend radius for fiber optic cables. The snap clip bracket can be easily supported by simply fitting it into the duct. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools

The hinge type of PanelMax(TM) wiring duct features a hinged cover, allowing for quick adjustments and changes to wiring. Additionally, the sealed hinge type provides reliable protection for wires when there are few terminal extractions. The NNC type is an environmentally friendly wiring duct, made from modified PPHOX material that does not contain halogen elements, thus preventing the release of chlorine gas during combustion. The G type has a flush structure between the cover and side walls, offering excellent wire capacity. The MC type is a metric size duct compliant with CE Marking. The F type has narrow fingers, allowing for subtle adjustments to the extraction position. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools

PanelMax(TM) wiring ducts are part of the reliable Industrial Automation Solutions offered by Panduit. These product systems significantly reduce design and assembly time, minimize space within electrical panels, and facilitate construction and maintenance, leading to a reduction in total costs. Shielded wiring ducts/noise shields separate cables that are sources of noise from those that are susceptible to noise, providing protection from interference. Additionally, DIN rail ducts can be installed directly on top of ducts, reducing the floor space of the electrical panel by approximately 30%. Furthermore, corner ducts allow for effective use of vertical corner areas that are typically unused in electrical distribution, contributing to the overall compactness of the electrical panel itself. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools

Tagging out refers to the practice of clearly indicating, through tags or similar means, the prohibition of operating equipment that has been shut down during an energy source isolation. The tags display clear messages such as "No Operation," "No Start," and "No Open." Indoor safety tag holders allow for the easy creation of indoor safety tags using PST tags. They can be easily installed with the included PLT2S type tie. This meets the pull strength requirement of 50 lb (22.7 kg) for safety tags as specified by OSHA standard 1910.147. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

By adopting Panduit's master key system, you can manage and implement lockout more reliably. There are three main types of master key systems. The "same key system" allows multiple padlocks to be locked and unlocked with a single key. Each padlock and key are identical, so any key can be used to lock and unlock all padlocks. The "master key system" allows multiple different padlocks to be locked and unlocked with a master key. Each padlock can only be locked and unlocked with its individual key and the master key. The "same key-master key system" is a combination of the same key system and the master key system. Padlocks within each group (set) can be locked and unlocked with the same key, but padlocks from different groups can only be locked and unlocked with the master key. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

The stainless steel type padlock for lockout has a brass body and a stainless steel shackle. It features a high-security double lock with a 6-pin cylinder, and the key cannot be removed until it is fully locked. The non-conductive padlock has an aluminum body and a shackle protected by non-conductive polyethylene, making it suitable for electrical hazards. The high-security padlock has an aluminum body that is anodized, providing excellent durability and corrosion resistance. The laminated type padlock has a shock-resistant laminated steel structure. It is zinc-coated and offers excellent corrosion resistance. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

Lockout refers to a method of isolating or continuing to isolate the energy (power) source supplied to machines or equipment by locking it. By using lockout/tagout in combination, it prevents accidental operations and ensures the safety of workers performing tasks within the operational range of powered equipment and devices. The electrical work lockout kit includes padlocks, breaker lockouts, and more. The maintenance lockout kit contains lockouts for gate valves, ball valves, etc. The power control lockout kit includes frame-type lockouts. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

The group lockout box is used when a large number of workers need to enter a work area that requires lockout at the same time. The lid cannot be opened until the last padlock is removed, ensuring the safety of both the workers and the equipment. It can accommodate up to 13 padlocks. It is treated with powder coating for rust prevention. The material is steel. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

Lockout refers to a method of isolating or continuing to isolate the energy (power) source supplied to machines or equipment by locking it. By using lockout/tagout in combination, it prevents accidental operations and ensures the safety of workers operating within the range of powered equipment and devices. The lockout for air couplers allows for easy locking of the air supply port. A robust stainless steel lockout device enables secure and safer lockout. The material is stainless steel. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

The code lockout wraps around and locks out 120-volt and 240 to 480-volt plugs. The key used must have a shackle diameter of 0.38 inches (9.7mm) or less. The material is polypropylene, and the color is red. The plug lockout is attached to the plug hole to prevent it from being inserted into the outlet. The key used must have a shackle length of 1.5 inches (38.1mm) or more. The material is polycarbonate, and the color is red. The outlet blockout prevents excessive load on the circuit by blocking unused outlets in a two-socket outlet. It can prevent electrical hazards caused by using adjacent outlets. The material is polyethylene, and the color is red. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

The valve lockout prevents the handle of the ball valve from being turned. The key used must have a shackle diameter of 0.3 inches (7.6mm) or less, and the space when locked must be greater than 1 inch (25.4mm). Please use an insert for narrow handles. For larger pipes, please use an extension. (PSL-BV2) Additionally, the gate valve lockout prevents the valve from being turned. There are five sizes available to lock out valves ranging from 1 inch (25.4mm) to 13 inches (330.2mm). For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

Lockout refers to a method of isolating or continuing to isolate the energy (power) source supplied to machinery or equipment by locking it. By using lockout/tagout in combination, it prevents accidental operations and ensures the safety of workers operating within the range of powered equipment and devices. Lockout hasps allow multiple workers to simultaneously lock out the target object to ensure safety. Multi-lockout hasps do not limit the target of the lockout by using wires. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other safety equipment

Lockout refers to a method of isolating or continuing to isolate the energy (power) source supplied to machines or equipment by locking it. By using lockout/tagout in combination, it prevents accidental operations and ensures the safety of workers performing tasks within the operational range of powered equipment and devices. There are various types of lockouts available, such as "lockout for miniature circuit breakers," which is ideal for use with miniature circuit breakers, "lockout for circuit breakers," which locks out the breaker switch to prevent accidental activation, "universal lockout for circuit breakers," "tool-less breaker lockout for frame-type breakers," and "breaker lockout for mini circuit breakers," which can be used with most wall toggle switches. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Circuit breakers and switches

Corrugated tubes are flexible and do not twist. They excel in impact resistance, abrasion resistance, and crush resistance. The CLT type has slits, making it easy to install. There are two types of materials: polyethylene and heat-resistant nylon. The operating temperature range for polyethylene is -40°C to 50°C, while for heat-resistant nylon 6, it is -40°C to 110°C. We also offer "fittings for corrugated tubes" that can be installed quickly and easily, improving work efficiency and reducing labor. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other packaging materials

PVC tubes are used for insulation and protection of lead wires, harnesses, soldered parts, and electrical/electronic components. The operating temperature range is -20°C to 105°C. The nominal sizes include 12AWG, 6AWG, 1AWG, 3/8, 1/2, 3/4, and 1 inch. The inner diameters (φmm) are 2.3, 4.5, 7.9, 10.1, 13.3, 20.0, and 26.3, while the wall thicknesses (mm) are 0.4, 0.5, 0.6, and 0.9, and the dielectric strengths (V) are 300 and 600. Additionally, the colors available are transparent and black, and the lengths (m) are 304.8, 152.4, 76.2, and 30.48. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

Net tubes prevent wear on electrical wires, cables, and tubes. They are lightweight yet highly durable. Installation is easy and they fit perfectly into any shape. The mesh structure prevents heat and moisture from accumulating inside. The operating temperature range is -70°C to 125°C. There are two types of standard materials: polyethylene terephthalate and flame-retardant polyethylene terephthalate. Additionally, the super net tube (fray-resistant type) features an innovative design that minimizes fraying when cut with scissors. This eliminates the need to cut the ends with a hot knife, reducing work time and costs. The material is polyethylene terephthalate. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

Heat shrink tubing includes the "Standard Type (HSTT)" which is ideal for insulation, protection, termination processing, and identification of internal wiring in equipment; the "Yellow/Green Heat Shrink Tubing (HSTT)" which allows for identification and labeling of conductors that require protection, conductors without potential difference, ground conductors, and insulated conductors for electrical shock prevention; the "HSTTV Type (UL VW-1 Grade)" which is certified to VW-1 grade under UL standards; the "HSTTK Type Kynar Polyvinylidene Fluoride (PVDF)" which is semi-rigid with high heat resistance and excellent chemical and abrasion resistance; the "HSTTN Type (Elastic Neoprene)" which excels in flexibility, abrasion resistance, chemical resistance, and particularly oil resistance, using high-performance flame retardants; and the "HSTTT Type (Teflon)" which has high insulation, heat resistance, and excellent abrasion resistance. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

Spiral wrapping is used to bundle electrical wires, cables, tubes, etc., to prevent wear. There are seven types of materials suitable for indoor and outdoor use as well as harsh conditions, with outer diameters ranging from φ3.2mm to φ25.4mm. Panduit's cable ties can be used to secure the ends of the spiral wrapping. When wrapped tightly without gaps, the bundled wires are well protected, and insulation is improved. It is also possible to wrap with gaps, allowing for free spacing. Each package includes installation aids. The small quantity packaged spiral wrap is a convenient size and package for bringing to the job site. For more details, please contact us or refer to the catalog.

• Wiring materials
• Other work tools
• Other packaging materials

Pan-Wrap(TM) is designed to gently yet securely protect electrical wires and cables while maintaining their flexibility. Its unique slot shape enhances flexibility, allowing wires to be pulled out from anywhere as needed. The wide overlapping sections accommodate a wide range of bundle diameters with a single size, reducing the number of components required. The dedicated installation tool opens to 180°, enabling quick and easy insertion of the wire bundles, thus achieving a reduction in total costs. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Wiring materials
• Other work tools
• LAN construction and wiring work

The flexible bush is ideal for protecting wires that pass through panels, chassis, and more. Its snap-in design offers excellent flexibility, making installation easy. It can also be secured with adhesive. There are two shapes available: one with slits on the sides and one without. The standard type is made of nylon, while the roll type comes in two materials: polyethylene and weather-resistant polyethylene. The adhesive-backed option has adhesive on the inside, allowing for easy and secure installation without coming loose. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

The ISO warning labels of the PESW type are various warning labels based on the provisions of ISO 3864. They are made of high-quality vinyl film with adhesive backing, making them easy to apply anywhere. The material is vinyl, and the temperature range for use is -40°C to 80°C. There are card types for electric shock warning <ISO 3864-B3.6>, radiation warning, laser warning, hazardous area <ISO 3864-B3.1>, and static electricity warning, as well as roll types for electric shock warning <ISO 3864-B3.6> and high temperature warning. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

The label holder can be secured with cable ties (2.5mm/3.6mm width) or tack ties (6.4mm width). It comes with a transparent laminate to protect the text. The material is vinyl, and the operating temperature range is -18°C to 80°C. Additionally, the label core is used when applying self-laminating labels to thin fiber patch cords. It increases the display space and makes the printed content of the label easier to read. Being a sleeve type, it can be moved to a visible location. The material is PVC, and the operating temperature range is -24°C to 75°C. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

The writing marker tape allows you to easily create self-laminating labels. There are refill options available for the labels, and refilling is very simple. Warning labels come in a roll that is set in a case. The marker book is conveniently pocket-sized for portability. It can be easily cut along the perforation, allowing for display on both ends. The wire markers include PCM type, PCM type combination pack, PSM type self-laminating type, PPM type self-laminating type, and more. Additionally, we offer a tape holder that allows you to cut the tape simply by pressing a cover. For more details, please contact us or refer to the catalog.

• Wiring materials
• label

Data labels (panmark labels) include self-laminating labels and blank labels compatible with various printers. A wide range of labels in terms of material and size is available. Label applications include types that can be used as product and production management labels, polyimide labels that can be used under high temperatures such as reflow and soldering surfaces of circuit boards, and self-laminating types that protect the printed surface from dirt, solvents, and oils. Additionally, when used in a flag shape, destination displays can be shown even after processing both ends. Dedicated printers include the PanTher LS8E/LS8EQ thermal transfer handheld printer and the TDP43ME/E thermal transfer printer. The Easy-Mark label printing software supports Japanese and allows for intuitive operation. It enables quick and easy destination labeling for cables and identification/management of various devices. For more details, please contact us or refer to the catalog.

• Wiring materials
• label
• Software (middle, driver, security, etc.)

Harness board accessories can speed up the wiring and forming of wires during harness assembly work. By keeping the wires at the same height from the harness board, bundling work can be done easily. To maintain the harness at approximately 33mm at the same height on the board, please use RER, ER, BR.75-E6, BR.5-E6, CPH.75-S8, TJF, SHH1-S8, and SHH3-S8. This height is suitable for use with fully automatic bundling tool systems PAT1M, PAT1.5M, and PAT2S. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Harness