パンドウイットコーポレーション日本支社 List of Products and Services

The wiring fixture secures bundled wires without using cable ties. There are three types of fixing methods: the "adhesive fixing type," which can be secured with pre-attached adhesive tape; the "screw fixing type," which uses screws; and the "push-in fixing type," which can be secured without using screws or adhesive tape. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The cable tie holder allows for easy and efficient securing of bundled wires when used with cable ties. There are several fixing methods: the "adhesive fixing type," which can be secured with pre-attached adhesive tape used with cable ties; the "screw fixing type," which uses screws; the "push-in fixing type," which can be secured without screws or adhesive tape; and "special types," such as rotating tie mounts or clip-type holders. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

In the selection guide, you can choose fasteners suitable for your application, such as adhesive tape fasteners and adhesive fasteners. The materials include ABS, PVC, nylon 66, heat and weather-resistant nylon 66, noril, polypropylene, and zinc-coated steel. Additionally, the substrates for foam tape include polyethylene foam and VHB, while the adhesives consist of rubber-based adhesive tape, acrylic-based adhesive tape, and VHB. Rubber-based adhesives are suitable for general applications. Acrylic-based adhesives are suitable for outdoor use and high temperatures. Furthermore, VHB tape excels in weather resistance, heat resistance, and solvent resistance. VHB is a registered trademark of 3M. For more details, please contact us or refer to the catalog.

• Wiring materials
• LAN construction and wiring work

The MS type stainless steel band features a completely new buckle mechanism that is different from traditional methods. The binding time is reduced to half that of conventional products. The buckle lock secures the cut end of the band by folding it inward, making it safe to handle and resulting in a thinner binding section. It is suitable for harsh usage conditions such as radiation resistance, weather resistance, corrosion resistance, and heat resistance. The long type can be cut to the required length and used with the buckle (MSBW). It is suitable for binding thick cables and wires under severe conditions. Additionally, the nylon 11 coated tie provides insulation between different metals and, being coated with nylon 11, offers excellent chemical resistance and saltwater resistance. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Piping Materials

Stainless steel accessories can easily and efficiently secure bundles when used with stainless steel bands. The stainless steel mount has a thin structure, so it does not interfere when attached to cables or bundles. It can be secured with just one screw. The two-direction insertion type stainless steel fastener allows the stainless steel band to be inserted from two directions. Additionally, the flat panel hole mount is used to secure cables, wires, and hoses to partitions or flat panels. It is useful when work can only be done from one side of the panel. The marker plate is used to imprint letters or symbols with an engraving machine. It is excellent in corrosion resistance, wear resistance, and radiation resistance, allowing for semi-permanent labeling. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• Piping Materials

The "MRT/MRS" is a tension-holding stainless steel band. "MRT" can maintain its strength during tightening without loosening even after being cut, regardless of the hardness of the object. "MRS" allows for a 360-degree seal. With our stainless band, it can now be used on "hard objects" that were previously impossible. 【Features】 ■ Strong holding strength ■ Automatic locking design ■ Chamfered surface edges ■ Three widths: S, LH, H *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Wiring materials
• Piping Materials

The MLT type stainless steel band is excellent in wear resistance, radiation resistance, weather resistance, and corrosion resistance. It is ideal for use in extremely harsh environments, such as indoor and outdoor applications, as well as underground burial. It can be quickly and completely secured with a dedicated tool, significantly contributing to total cost reduction. The surface is smooth and neatly chamfered, making it easy and safe to handle. The automatic locking type is cut flush at a consistent tightening strength when using the dedicated tool. Additionally, the long type can be cut to the required length, contributing to reduced inventory and management tasks. The nylon 11 coating protects the surface and does not damage the bundled wires. It also provides insulation between dissimilar metals. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Pneumatic strapping tools tighten and cut at a preset strength when the trigger is pulled. They use air pressure of 5.3 to 5.8 kg/cm². No special maintenance is required. The PTS/PTH features an ergonomic design and usability, improving work efficiency and reducing operator fatigue. The PPTEH is lightweight (weighing 1.47 kg), robust, and easy to operate, which helps reduce operator fatigue. The PPH10 is the hose that connects the tool to the regulator (3 m). For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The manual strapping tool with adjustable tension setting tightens and cuts at a pre-set strength when the trigger is pulled. We offer four types: GTS, GTSL, GTH, and GS4EH. Additionally, the manual strapping tool without adjustable tension requires the user to manually tighten and determine the strength before cutting. It is an economical and robust tool suitable for maintenance and on-site use, with three types available: STS2, STH2, and ST3EH. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

This is a dedicated fixture for tack ties. The dimensions are 28.4mm in length, 28.4mm in width, and 8.6mm in height, available in packs of 25 and 100. The materials include nylon 66 and flame-retardant nylon 66. The fixing method for "ABMT-A" is adhesive tape, while "ABMT-S6" uses M3 screws. The colors available are natural and black for "ABMT-A," and natural, black, and white for "ABMT-S6." For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Ultra-Cinch(TM) is made from soft, high-quality materials and can be safely used in wiring installation work. It is adjustable and can be repeatedly attached and detached. With a unique design that has hooks and loops on the same side, it can securely hold a wide range of bundled wires from small to large diameters. The low-profile buckle ring keeps the finished outer diameter small while securely fastening the bundles. The grommet-type design allows for strong and reliable bundling, and it can be fixed to cabinets, preventing the bundles from coming loose even when pulled. The tapered end makes it less likely to snag and allows for easy threading. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

Tak-Tape(TM) is a thin and flexible tack tape that allows for quick bundling of wires. It features hooks and loops on both sides for easy attachment. When wrapped around a bundle of wires, the tip securely stays aligned with the bundle. Available in long roll types of 6.1m and 10.6m, it can be cut to the desired length, minimizing waste. To ensure the specified loop tensile strength, please overlap by more than 50mm. Tape-Ty(TM) is also thin and flexible. With its non-slip seal, it allows for one-handed positioning even in tight spaces, enabling quick bundling of wires. It produces no cut debris and can securely bundle high-quality cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The Tak-Ty(TM) Tack Tie can bundle high-quality cables such as communication cables and optical fiber cables without over-tightening. It can be easily removed and reused, allowing for quick responses to frequent cable relocations, expansions, and changes. Unlike nylon cable ties, it is not affected by humidity. Additionally, it is resistant to vibrations and does not loosen. ~Free Sample Giveaway Campaign~ We are offering a sample bag containing three types of clips for free. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The kit box "KP-506A" is an indoor use kit (Nylon 66) that includes Pantai cable ties and mounts. The "KP-506A-0" is an outdoor use kit (weather-resistant Nylon 66) that also includes Pantai cable ties and mounts. The "KP-509" is an indoor use kit that is ideal for prototypes and new product development. It contains over 600 various products, including a wide range of shapes, sizes, colors, and various types of cable tie mounts and wiring fixtures. The "K-205" is an indoor use kit that includes Pantai cable ties, a tying tool, crimp terminals, splices, and crimping tools. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The Pan-Ty(TM) stud mount nylon tie wraps of the special type can be easily secured by simply pushing them onto a stud bolt. They are made of heat-resistant nylon, allowing for continuous use in high-temperature environments. Double loop tie wraps can secure or separate two bundles of wires, while triple loop tie wraps can secure or separate three bundles of wires. Additionally, double hose clamps can secure two hoses, such as hydraulic, pneumatic, or gasoline hoses, preventing twisting and wear of each hose. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Sta-Strap(TM) nylon tie (SST series) features a two-part molded head and tie. It is easy to insert and can be removed before fully tightening. The clamp type (SSC series) is a unique tie that can be secured even after being screwed in. It can also be fixed after tying. It can be removed before fully tightening. The marker type (SSM series) allows for both bundling wires and displaying identification simultaneously. The marker part can be used in both wrap-around and flag-type displays. The chassis/panel mount tie (SSPM series) can securely fasten bundles directly to the chassis without the use of fixtures. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

Inline cable ties have serrations on the outside, and the tie is inserted sideways into the head. This allows for large bundles of wires to be secured in a nearly round shape. Additionally, Hyper-V(TM) HyperV features a very strong loop tensile strength, allowing for a tight grip on the cable bundles. It has a unique two-wedge lock design with two locking claws on the top and bottom. The serrations are present on both sides of the strap, providing flexibility and accommodating irregularly shaped bundles. Since the strap is inserted sideways into the head, the head does not protrude, resulting in a smaller finished bundle. The entire design is rounded to prevent damage to wire insulation or the hands of workers. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The Belt-Ty(TM) standard type has a head height that is approximately 35% lower than conventional bands, preventing snagging of the head and resulting in a smaller overall bundle. The cut ends of the tie wraps do not protrude, so they do not harm surrounding cables or workers. Additionally, the elastomeric tie wraps are made from a flexible material that does not tightly squeeze communication cables. They are elastic, adhere closely to the cables, and prevent lateral movement. Made from halogen-free material, they have a UL94V-0 flame retardancy rating. They are removable and accommodate frequent relocation or expansion of cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Contour-Ty(TM) is a unique design that prevents damage to wires and cables. The head does not protrude significantly after bundling, resulting in a smaller overall bundle. The serration is on the outside, and the entire surface is beveled and smooth, preventing damage to the wire insulation. It is suitable for use in areas with continuous vibrations. Additionally, the heat-resistant nylon 66 can be used continuously in high-temperature environments. The color is light green (it may change to ochre due to temperature and humidity). The flame-retardant nylon 66 is made of UL flame-retardant grade 94V-0 nylon and is white in color. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The standard type of Dura-Ty(TM) Super Reel Band is ideal for vertical trunk lines and rack binding that require strength. It is also highly weather-resistant, making it suitable for use in areas where stainless steel was traditionally used. It is perfect for outdoor construction, starting with power lines that require weather resistance and durability. Additionally, the slim type uses the same material as the conventional Super Reel Band, is narrower at 8.4mm, and is flexible, allowing for easy routing during installation while securely binding the cables. ~Free Sample Giveaway Campaign~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• Other work tools
• Wiring materials
• LAN construction and wiring work

The standard type of Dome-Top barb tie nylon cable tie uses 316 stainless steel for the locking part, which has minimal aging changes. The clamp type (BC series) is used to secure wires in locations such as chassis, panels, walls, and ceilings. The push-in type (BW series) is suitable for attaching bundled wires to flat surfaces like panels. The push-in type (BP series) can be easily installed by pushing into mounting holes. It features a design without wings, allowing installation in tight spaces. The marker type can simultaneously identify and bundle wires and cables. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

The temporary type nylon cable tie allows for easy removal and reuse even after bundling by lowering the tab attached to the head. It can be used for temporary fastening when adding or repairing wiring. The temporary type nylon lashing tie is a heavy-duty version of the temporary type nylon cable tie. By using the mounting clip (MCEH-S25), it can be used as a clamp-type cable tie. Additionally, we offer clamp types, center push mount ties (for corrugated tubes), push-in types (PLWP/PRWP series), ladder-style cable ties (removable push-in type), umbrella wing push mounts, push-in types (PLP series), and marker type nylon cable ties. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Pan-Ty is a highly versatile standard type of nylon cable tie that can be widely used in places where bundling of wires, cables, and hoses is necessary. It can bundle items up to a maximum diameter of 330mm. The loop tensile strength ranges from 3.7kg to 79.4kg. There are 16 colors available for identification purposes, such as for bundling wire. It is an automatic locking integrated molded product. A wide range of sizes is available, from lengths of 71mm to 1100mm and widths of 1.8mm to 12.7mm. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials
• LAN construction and wiring work

Panduit offers a wide range of cable ties in various styles, materials, and colors. In terms of materials, there are standard nylon 66, weather-resistant, heat-resistant, and flame-retardant nylon 66, metal-filled nylon 66, super heat-resistant polyether ether ketone, fluoropolymer Tefzel with chemical and UV resistance, metal sensor detection type metal-filled polypropylene, weather-resistant polypropylene, chemical-resistant polypropylene, and Delrin polyacetal, which excels in stretch resistance, water resistance, and flexibility. Additionally, in terms of shapes, there are standard, screw-lock, push-in, marker, flag, temporary, inline, and long-length options available. For more details, please contact us or refer to the catalog.

• Other work tools
• Wiring materials

At Panduit Corporation's Japan branch, we handle "Rotating Labels." The laminate protects the printed surface from dirt and wear. After application, the labels can rotate and slide. We offer a lineup for "Laser Printers" and "TDP43ME/E Thermal Transfer Printers." In addition, we also handle "Self-Laminating Labels" that protect the printed surface from dirt and wear, as well as "Marker Plates" and "Nameplate Labels for Distribution Boards." 【Features】 ■ Labels can rotate and slide after application ■ Easy installation ■ Laminate protects the printed surface from dirt and wear ■ Can be added after terminal processing ~ Free Sample Giveaway Campaign ~ We are offering a free sample bag containing a set of three types of clips. If you are interested, please feel free to contact us.

• label
• Special labels, etc.
• LAN construction and wiring work

Use cable ties to secure the labels for vertical risers and other displays within the building. It can be labeled for cables of various diameters. The backing is A4 size. It can be clearly labeled with tags or plates for thick cables. For more details, please contact us or download the catalog.

• label

The adhesive is not included. It is used by inserting it into commercially available transparent pockets. It can be clearly displayed with tags or plates on thick cables. For more details, please contact us or download the catalog.

• label

Peeling off the attached label will tear it, preventing opening or rewriting. It is recommended for security purposes. For more details, please contact us or download the catalog.

• label

This is a self-laminating label specifically designed for label cores. It is ideal for displaying a lot of information on thin cables. 【What is a label core...?】 When displaying information on thin optical fibers, using a label core increases the display area, allowing for a label with more information to be attached to the cable. The sleeve is made of flexible PVC. It should be installed on the straight section of the cable at least 50.8mm away from the fiber boot. For more details, please contact us or download the catalog.

• label

This label is ideal for network equipment. It is suitable for displaying network devices such as patch panels, faceplates, and punch-down blocks. For more details, please contact us or download the catalog.

• label
• Other network tools

You can speed up the labeling work for fiber optic cables. You can secure a wide display space for fiber optics. The backing is A4 size. For more details, please contact us or download the catalog.

• label

This is a non-laminated label for cable identification. It can be used for flag-type displays of wires. For more details, please contact us or download the catalog.

• label

This is a label that can be used for various purposes. It is suitable for display on flat surfaces such as various devices, printed circuit boards, and distribution boards. For more details, please contact us or download the catalog.

• label

By printing the destination of the electric wire and starting to wind from the printed part, the printed text is laminated to prevent it from disappearing by covering it with a transparent part, which also protects it from dirt, solvents, and oils. Please refer to the recommended cable sizes listed in the catalog for the appropriate cable size for the labels you will use. Displaying is also possible after terminal termination. For more details, please contact us or download the catalog.

• label

Labels for laser printers are made from the most suitable materials for each label format. We offer various label formats including self-laminating labels, component labels, non-laminated labels, and labels for optical fibers, utilizing the characteristics of materials such as polyester, polyvinyl fluoride, polyolefin, polyester (without adhesive), and paper to provide products that meet our customers' needs. The print quality may be affected by the printer model, settings, and compatibility with the toner used. Please check the suitability in actual usage beforehand. We provide product samples upon request. Please make your request through our website. The base size for laser printer labels is letter size (excluding some labels). For more details, please contact us or download the catalog.

• label

The innovative label design allows the label to be rotated after being attached to the cable, enabling the display content to be viewed from any angle. Position adjustments are also possible, allowing for a visually appealing alignment of the display. Labels can be easily attached without removing cables that are already installed on the equipment. It is ideal for use in areas with dense cables. An external roll stand (TDP43ME-RS) is required for 3-inch labels. ~ Free Sample Giveaway Campaign ~ We are offering a sample bag containing a set of three types of clips for free. If you are interested, please feel free to contact us.

• label

The destination of the electric wire is printed, and by starting to wind from the printed part and covering it with the transparent part, it is laminated to prevent the printed characters from fading, and it can be protected from dirt, solvents, and oils. Please refer to the recommended cable sizes listed in the catalog for the appropriate cable size for the labels you will use. Displaying is possible even after terminal termination. An external roll stand (TDP43ME-RS) is required for 3-inch label roll cores. For more details, please contact us or download the catalog.

• label

You can easily create labels using the included Easy-Mark(TM) label printing software and your own computer. It can be used for rotating labels, self-laminating labels, blank labels, marker plates, etc. It is lightweight and compact in size. 【Compatible Labels】 Self-laminating labels, blank labels, heat shrink tube markers, marker plates, rotating labels, nameplate labels, etc. For more details, please contact us or download the catalog.

• label
• Printer
• Commercial printers

The "Non-Laminated Label" for dot printers is a non-laminated label for cable identification. It is made of a flexible material that can be wrapped around cables for display and can be used as a flag-type display for wires. The material is excellent in oil resistance and abrasion resistance, and it uses vinyl cloth that can be reapplied without leaving adhesive residue when removed. By creating labels yourself, you can accommodate "small quantities and diverse varieties" and "short delivery times." Panduit Corporation offers a variety of label types compatible with various printers, delivering products that provide customers with trust and satisfaction. For more details, please contact us or download the catalog.

• label

Labels for thermal transfer printers are made using the most suitable materials for each label format. We offer various label formats such as self-laminating labels, rotary labels, and component labels, and we provide products that meet customer requirements while utilizing the characteristics of materials like polyvinyl fluoride, vinyl, polyester, and paper. We recommend using our TDP43ME/E thermal transfer printer along with the corresponding genuine ribbons. If you choose to use a thermal transfer printer from another manufacturer, we suggest conducting a print test with our labels. Additionally, to optimize print quality, please select the appropriate ribbon based on the material of the labels you will be using. For more details, please contact us or download the catalog.

• label

By using the label printing software Easy-Mark(TM), you can quickly and easily create labels for cable destination displays and identification/management of various devices. It enables cable labeling and device identification in markets such as industrial equipment, distribution boards, construction/maintenance, data centers, and network applications. You can display the printing results directly on the screen and work while checking the actual printing image. It is equipped with an import function for data and symbols from Excel, allowing you to use existing data as is. The paper information for labels provided by Panduit is pre-registered, significantly reducing the time and cost involved in label creation. For more details, please download the catalog or contact us.

• Commercial printers
• label
• Software (middle, driver, security, etc.)

The "Component Label," designed for dot matrix printers, is a label that can be used for various purposes. It is suitable for displaying on flat surfaces such as various devices, printed circuit boards, and distribution boards. We offer products made from materials such as polyester, vinyl cloth, and polyvinyl fluoride. By allowing customers to create their own labels, we can accommodate "small quantities and diverse varieties" with "short delivery times." Panduit Corporation offers a range of label types compatible with various printers, delivering products that provide customers with trust and satisfaction. For more details, please contact us or download the catalog.

• label

**How to Use Self-Laminating Labels** Attach the printed part of the label horizontally to the cable, and wrap the label around the cable using the pads of your fingers. Once you cover the printed part with the transparent laminate section and stick it down, you’re done. **How to Use Rotating Labels** Hold the non-adhesive part in the center of the label and peel it off the backing. Stick the adhesive part (anchor) at the top of the label onto the cable. Make sure to attach the label straight to the cable. Wrap the label around the cable and rotate it in the direction you wrapped it. The anchor part will separate from the label. The label can be rotated and slid. By standing the non-adhesive part of the anchor upright, it can serve as a stopper for the label. Remove it if it’s not needed. For more details, please download the catalog or contact us.

• Commercial printers
• Labeller
• label

The "self-laminating label" for dot printers allows you to print destinations for electric wires and starts rolling from the printed part, covering it with a transparent section to ensure that the printed text does not fade. It also protects against dirt, solvents, and oils. Displaying information is possible even after terminal finishing. We offer products made from materials such as vinyl, polyolefin, and polyvinylidene fluoride. Please choose the optimal product from our extensive lineup. *For the appropriate cable size for the labels you will use, please refer to the recommended cable sizes listed in the catalog. For more details, please contact us or download the catalog.

• label

【Cable Display Labels】 In addition to being durable and difficult to peel off, we offer labels that protect cable displays and printed surfaces, easily rotatable and movable labels for better visibility, flag-type display labels ideal for thin cables or densely packed cables, types that can display a lot of information on thin cables, and options for clearly displaying tags or plates on thick cables. 【General Display Labels】 We have a wide variety of labels including product nameplates, connector displays, displays for ultra-adhesive rough surfaces, IC displays, reflow-compatible options, nameplates for switches (suitable for outdoor use), customizable labels with specified widths, labels for proof of removal, and those for network use. For more details, please download the catalog or contact us.

• Commercial printers
• Labeller
• label