コンテック List of Products and Services

The RP-WEE-SR1 is an Ethernet wireless converter that allows easy wireless connectivity for devices that support wired LAN. It adopts NEC's developed ExpEther wireless IP core, achieving low-latency communication with significantly reduced packet loss rates through three different frequency bands: IEEE802.11n at 2.4GHz, 5.2GHz, and DECT at 1.9GHz, along with its unique encoding technology. By using the RP-WEE-SR1, it is possible to wirelessly connect field networks where real-time communication is crucial, such as PROFINET, EtherNet/IP, CC-Link IE Field Basic, and CC-Link IE TSN, which were previously challenging to implement wirelessly. 【Main Features】 ● Wireless conversion of field network communication with high reliability and low latency, certified as a recommended wireless device for CC-Link IE TSN (INFO) ● The number of packets with a delay of more than 5ms is within 0.01% ● Easy setup with a physical switch that requires no IT knowledge ● Equipped with 4 input/4 output digital I/O, transferring digital signals via Virtual Wire (Layer 1) ● Can be mounted on a DIN rail

The Contec Wireless I/O series employs a robust sub-gigahertz 920MHz wireless technology that excels in transmission distance and is resistant to obstacles. It offers analog input terminals (slave devices) for wireless data communication of analog signals, digital input/output terminals (slave devices), and an Ethernet gateway (master device) that converts Ethernet to 920MHz wireless. Up to 128 I/O terminals (slave devices) can be connected to a single master device (theoretical value). The Wireless I/O series supports multi-hop communication, making it suitable for remote monitoring and control of devices spread over a wide area. 【Main Features】 ● Highly reliable multi-hop communication ● Supports sub-gigahertz 920MHz wireless with excellent transmission distance ● Compatible with P2P (Peer-to-Peer) mode

This is an embedded wireless LAN board compliant with the wireless LAN standard specifications IEEE802.11n/a/b/g, supporting wide input power supply (5 - 30VDC) and power supply from LAN connectors. By simply connecting it to the LAN port (RJ-45 connector) of LAN-compatible devices with a LAN cable, you can turn those devices into wireless LAN-compatible devices with advanced security, stable communication, and excellent maintainability, independent of the OS or CPU. With mode switching, it can operate not only as a station (client) but also as an access point (parent) or repeater. It can be used as an access point or relay device. Additionally, there is a wide range of optional antennas available. Depending on the radio environment, it is also possible to extend an antenna outside the device. You can choose from our optional antennas according to your application. Furthermore, it supports power supply via an AC adapter (sold separately), DC power supply of 5-30VDC, or LAN connectors.

The SH-8008F is a compact industrial switching hub that conforms to the IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) standards, with dimensions of [40(W) × 60(D) × 90(H) mm]. It features AutoMDI/MDI-X and auto-negotiation. Being fanless, it can be used in environments where quiet operation is required. Additionally, it employs a metal casing with excellent heat dissipation, allowing for an operating temperature range of -20 to 60°C. It also includes redundant power supply and reverse polarity protection features.

This is a wireless LAN access point that complies with IP65 standards for dust and water resistance. It adheres to the standard IEEE802.11n/a/b/g specifications, allowing for the establishment of high-speed wireless networks in harsh environments such as factories and warehouses with high levels of dust and oil. Additionally, it can be used as an access point (parent station), a station (child station), or a repeater by switching modes. 【Main Specifications】 Type: Access Point (Parent Station); Station (Child Station); Repeater Supported Frequency Bands: 5GHz; 2.4GHz Supported Wireless LAN Standards: IEEE802.11n; IEEE802.11a; IEEE802.11g; IEEE802.11b

The CPS-HBL-8005F is a compact (25.2(W)×94.7(D)×124.8(H)mm) 5-port industrial switching hub that complies with IEEE802.3u (100BASE-TX) / IEEE802.3 (10BASE-T) standards. It features AutoMDI/MDI-X and auto-negotiation. Being fanless, it can be used in environments where quiet operation is required. Additionally, it supports an operating temperature range of -20 to 60°C, has redundant power supply, and includes reverse polarity protection for the power supply.

The ZCA5200 is a wireless LAN access point that supports Wi-Fi 6 simultaneous connections (5GHz band: IEEE802.11ax/ac/n/a and 2.4GHz band: IEEE802.11ax/n/g/b). It is compatible with the high-speed communication standard IEEE802.11ax and the secure encryption technology WPA3 standard, allowing for the establishment of a faster and more secure wireless network environment. Installation methods include mounting on walls or ceilings using the included mounting bracket. By using the optional IEEE802.3at compliant 10Gbit Ethernet PoE power supply unit "POW-CB70AT" for power supply via LAN cable, it can be installed in locations where power supply is difficult. 【Main Specifications】 ■ Type: Access Point (Parent Station) ■ Supported Frequency Bands: 2.4GHz / 5GHz simultaneous ■ Supported Wireless LAN Standards: IEEE802.11ax; IEEE802.11ac; IEEE802.11n; IEEE802.11a; IEEE802.11g; IEEE802.11b ■ PoE Support: Compliant with IEEE802.3at

The FXE5000 is a business card-sized module that enables Wi-Fi connectivity for devices with Ethernet communication capabilities. It is an intelligent type that implements the necessary wireless LAN driver, TCP/IP protocol stack, and encryption/authentication security functions on a board computer with an integrated CPU. By simply connecting it via cable, it is possible to easily convert Ethernet communication devices to Wi-Fi. It complies with the new wireless LAN standard Wi-Fi 6E (IEEE 802.11ax). New technologies such as OFDMA (Orthogonal Frequency Division Multiple Access), MU-MIMO (Multi-User MIMO), and Spatial Reuse have been implemented, resulting in a communication speed that is 2.8 times faster than conventional products compliant with Wi-Fi 5 (IEEE 802.11ac). Additionally, significant improvements have been made in throughput reduction and latency that occurred when using many child stations simultaneously. With the addition of the newly available 6GHz band, in addition to the traditional 2.4GHz and 5GHz bands, radio interference is reduced, allowing for the establishment of a faster and more stable communication environment.

This product is a compact IEEE802.11ah compatible wireless LAN converter. It complies with the standard IEEE802.11ah, allowing for the construction of a high-speed and long-range network. It supports external antennas, enabling the creation of a flexible wireless LAN system, and its lightweight and compact design allows for various installations such as on walls or DIN rails using the included mounting bracket. Additionally, it can be used as an access point (parent station) that can connect to up to four stations (child stations) by switching modes. 【Main Features】 ● Compliant with IEEE802.11ah standard ● Supports 920MHz band wireless with excellent transmission distance ● High-speed communication capable of video transmission ● Switchable between station (child station) and access point (parent station) ● Compatible with various power supply options and a wide temperature range

This product features one LAN port compliant with IEEE802.3ab (1000BASE-T) and is a LAN board compatible with Low Profile size slots. It supports long-term stable supply and a wide operating temperature range (-40 to 75°C), making it suitable for use in production equipment, plant factories, and social infrastructure applications. The new PCI Express compatible gigabit LAN board can be installed in both Low Profile and standard size slots by swapping the included bracket, allowing for the expansion of LAN ports in various types of industrial computers.

The SH-9008AT-POE2 is an 8-port industrial switching hub that supports PoE power supply compliant with IEEE802.3af and IEEE802.3at, and adheres to the standards of IEEE802.3ab (1000BASE-T), IEEE802.3u (100BASE-TX), and IEEE802.3 (10BASE-T). It is designed to operate within a wide temperature range of -40 to 70°C, making it suitable for environments where general-purpose switching hubs cannot be used. In locations such as production lines in automotive and electronic component factories, food and pharmaceutical factories, logistics and warehouses, building management and security, as well as stations and commercial stores, the installation of network cameras is progressing. Power can be supplied to the cameras via the PoE hub, but a challenge arises regarding the power supply to the PoE hub itself. In these locations, control panels often use a unified DC power supply, and there has been a need for wide-range DC power supply compatibility. This product features a wide-range DC power input of 12-54VDC and allows for cascading connections between devices, addressing these challenges with excellent environmental resistance as an industrial PoE-compatible switching hub.

This product is a wireless LAN access point compliant with the new Wi-Fi 6E standard (IEEE 802.11ax). It implements new technologies such as OFDMA, MU-MIMO, and Spatial Reuse, resulting in a communication speed that is 2.8 times faster than conventional products compliant with Wi-Fi 5 (IEEE 802.11ac). Additionally, the throughput reduction and delays that occurred when using many child stations simultaneously have been significantly improved. With the addition of the newly available 6GHz band, in addition to the traditional 2.4GHz and 5GHz bands, radio interference is reduced, allowing for a faster and more stable communication environment. 【Main Specifications】 ■ Type: Access Point (Parent Station); Station (Child Station); Repeater ■ Supported Frequency Bands: 6GHz; 5GHz; 2.4GHz ■ Supported Wireless LAN Standards: IEEE802.11ax; IEEE802.11ac; IEEE802.11n; IEEE802.11a; IEEE802.11g; IEEE802.11b ■ PoE Support: Compliant with IEEE802.3af

This product is a compactly designed IEEE802.11ah compliant wireless access point that can be used in various installation locations. The new Wi-Fi standard "IEEE802.11ah," which utilizes sub-gigahertz wireless communication, became available in Japan in September 2022. It operates in the 920MHz band, allowing for outdoor use without a license. Compared to traditional 920MHz wireless communication, it enables high-speed communication and the establishment of long-distance networks, making it promising for use in large factories, plants, and farms. The wireless access point of this product can be installed in various locations, including walls and DIN rails, thanks to its compact design and included mounting bracket. It also supports external antennas, allowing for the construction of a highly flexible wireless LAN system. 【Main Features】 ● Compliant with IEEE802.11ah standard ● Supports 920MHz band wireless with excellent transmission distance ● Compatible with various power environments and mode switching ● Suitable for installation not only on flat surfaces but also on walls and DIN rails ● Supports a wide range of temperature environments ● Compliant with advanced security standards WPA3/WPA2

The "SH-9005F" is a 5-port industrial gigabit switching hub compliant with IEEE802.3ab / IEEE802.3u / IEEE802.3 standards, featuring AutoMDI/MDI-X and auto-negotiation. It supports a wide range DC power input (8–35VDC) and is equipped with power redundancy and reverse polarity protection functions. Additionally, it is designed to operate in a wide temperature range of -20 to 60°C, making it suitable for environments where general-purpose switching hubs cannot be used. The "SH-8008AT-POE" is an 8-port industrial switching hub capable of PoE power supply compliant with IEEE802.3af and IEEE802.3at, and compliant with IEEE802.3u / IEEE802.3 standards. It supports a wide range DC power input (12–54VDC) and allows for power redundancy and cascading connections between devices. It also operates in a wide temperature range of -40 to 70°C, designed for environments where general-purpose switching hubs cannot be used.

This product is a converter unit that expands CAN communication capabilities via wireless LAN or USB. It complies with CAN 2.0B communication and supports a maximum communication speed of 1 Mbps. It is equipped with a USB Type-C port, allowing operation via USB. It is compatible with the SAE J2534 diagnostic protocol for automotive ECUs and can be used as a communication interface during vehicle maintenance diagnostics and ECU programming. 【Main Specifications】 ■ Bus Specifications: USB, Wi-Fi ■ Connector Used: D-SUB 9-pin (male) ■ Number of Channels: 2-ch ■ Communication Standard: CAN 2.0B (active) ■ Communication Speed: ~ 1 Mbps (CAN 2.0B) ■ Supported OS: Windows 11 (64-bit), Windows 10 (64-bit), Windows 10 (32-bit)

This product is a wireless LAN access point compliant with the new Wi-Fi 6E (IEEE802.11ax) standard. The implementation of technologies such as OFDMA (Orthogonal Frequency Division Multiple Access), MU-MIMO (Multi-User MIMO), and Spatial Reuse has increased communication speeds. Additionally, the throughput reduction and delays that occurred when using many child stations simultaneously have been significantly improved. The FXA5020-CN allows for system construction tailored to the environment by not only using the included antenna but also by attaching various optional antennas. The FXS5000-CN, with its compact design that incorporates an antenna, is suitable for space-saving in embedded applications. This product features mesh Wi-Fi and smart roaming capabilities, achieving a stable communication environment for wireless communication with numerous mobile devices, based on our concept of "pursuing uninterrupted wireless LAN."

The "SH-9210F" is an industrial managed switching hub that complies with IEEE802.3ab/IEEE802.3u/IEEE802.3 standards, featuring 8 Gigabit LAN ports with AutoMDI/MDI-X and auto-negotiation, as well as 2 SFP slots. It supports a wide range DC power input (12-58VDC) for power redundancy, allowing it to continue operating even if there is a power issue on one side. The "SH-9210AT-POE" is a PoE-enabled industrial managed switching hub that complies with IEEE802.3af and IEEE802.3at standards, featuring 8 Gigabit LAN ports with AutoMDI/MDI-X and auto-negotiation, along with 2 SFP slots. It supports DC power input (47-58VDC) for power redundancy, ensuring continued operation even if there is a power issue on one side. Both of these industrial managed switching hubs are equipped with 2 SFP slots, allowing for the installation of SFP modules to build fiber optic networks and extend transmission distances.

This product is a LAN board equipped with two LAN ports that support IEEE802.3ab (1000BASE-T) and is compatible with Low Profile size slots. The PCI Express compatible gigabit LAN board can be installed in both Low Profile and standard size slots by replacing the included bracket, allowing for the expansion of LAN ports in various types of industrial computers. 【Main Features】 ● Low Profile size compatible with IEEE802.3ab (1000BASE-T) ● Supports Low Profile size/standard size slots (bracket included) ● Operates in ambient temperatures from -40 to 75℃ ● Drivers available for Windows/Linux

This product is a wireless LAN converter equipped with 4 digital inputs and 4 digital outputs. Using Modbus-TCP, it allows for remote control of digital input and output signals via Ethernet or wireless LAN. As a wireless LAN converter compliant with the Wi-Fi 6E (IEEE 802.11ax) standard, it implements new technologies such as OFDMA (Orthogonal Frequency Division Multiple Access), MU-MIMO (Multi-User MIMO), and Spatial Reuse, resulting in faster communication speeds compared to conventional products compliant with Wi-Fi 5 (IEEE 802.11ac). In addition to the traditional 2.4GHz and 5GHz bands, the newly available 6GHz band* reduces radio interference and enables the establishment of a faster and more stable communication environment. * The 6GHz band is only available in single-station and dual-station modes.

The industrial managed switching hub "SH-9210F" complies with the IEEE802.3ab/IEEE802.3u/IEEE802.3 standards and features AutoMDI/MDI-X and auto-negotiation with 8 Gigabit LAN ports, along with 2 SFP slots. It supports a wide range DC power input (12-58VDC) for power redundancy, ensuring continued operation even if there is a power issue on one side. 【Features】 ■ Supports a wide temperature range (-35 to 70°C) ■ Capable of PoE power supply ■ Supports power redundancy with DC power input (47-58VDC) ■ Enables network construction using fiber optics (requires SFP module) ■ Power redundancy and wide range power input support *For more details, please download the PDF or contact us directly.

■COM-1C2-USB This is a micro converter that converts a computer's USB port to RS-232C compliant serial communication. It features one channel of RS-232C compliant COM port. It is equipped with a FIFO buffer of 128 bytes for transmission and 384 bytes for reception, supporting baud rates up to 921,600 bps. ■COM-1P2-USB This is a micro converter that converts a computer's USB port to RS-232C compliant serial communication. It isolates the bus line from the computer and features one channel of RS-232C compliant COM port. It is equipped with a FIFO buffer of 128 bytes for transmission and 384 bytes for reception, supporting baud rates up to 921,600 bps. ■COM-1PD2-USB This is a micro converter that converts a computer's USB port to RS-422A/485 compliant serial communication. It features one channel of RS-422A/485 communication port, isolates the bus line from the computer, and includes a surge protection circuit in the communication port to enhance noise resistance. It is equipped with a FIFO buffer of 128 bytes for transmission and 384 bytes for reception, supporting baud rates up to 921,600 bps.

This product is an industrial managed switching hub that complies with the IEEE 802.3ab (1000BASE-T), IEEE 802.3u (100BASE-TX), and IEEE 802.3 (10BASE-T) standards, featuring 8 Gigabit LAN ports and 2 SFP slots. It supports the CC-Link IE TSN standard and is suitable for use in environments where quiet operation and long lifespan are required due to its fanless design. Additionally, it achieves an operating temperature range of -10 to 65°C thanks to its excellent heat dissipation metal housing. It can be installed on a 35mm DIN rail or on walls using various mounting brackets. In addition to a wide range DC power input (12-48VDC), it supports input from two power sources and includes various managed functions for network management, control, and reliability enhancement.

This product is a compact IEEE 802.11ah compatible wireless LAN converter that can be installed in various locations. The new Wi-Fi standard "IEEE 802.11ah," which utilizes sub-gigahertz wireless communication, became available in Japan in September 2022. It operates in the 920MHz band, allowing for outdoor use without a license. The new Ethernet wireless converter features a lightweight and compact design, along with a mounting bracket included, enabling installation in various locations such as walls and DIN rails. Additionally, it supports external antennas, allowing for the construction of a highly flexible wireless LAN system.