ケイエステック Product Lineup

- Automates the dilution and water supply operations of water-soluble oil agents. - The mixing ratio can be adjusted accurately and with high performance from 0 to 35%. - Reduces the burden on dilution operators and maintains a uniform dilution concentration. - A float switch is installed on the customer's dilution liquid tank to detect the liquid level and automatically supply water and stop as needed. - In the event of a float switch failure, a timer will force a stop to prevent leakage of the dilution liquid.

• Liquid level control/level switch

- Automates the dilution and water supply work of water-soluble oil agents. - The mixing ratio can be adjusted with high performance and accuracy from 0 to 35%. - Reduces the burden on dilution operators and maintains a uniform dilution concentration. - A float switch is installed on the customer's dilution liquid tank to detect the liquid level and automatically supply water and stop as needed. - In the event of a float switch failure, it will forcibly stop using a timer to prevent leakage of the dilution liquid.

• Water treatment equipment

Isn't it a hassle to check the remaining amount in the drum? The KS-DFS1 float-type low-level lamp for drums simply plugs into the small mouth of the drum. When the remaining amount gets low (at the lowest point of 3 cm), the lamp lights up. (The height can be adjusted.) Since it uses the small mouth, it won't get in the way when using pumps or other equipment. There are air holes in the connection part, so it won't be sealed. The pipe part is made of stainless steel, ensuring durability. It can be used with an AC 100V outlet. Since it has a float switch, it can be used for purposes other than just lighting the lamp. (Negotiable)

• Other measurement, recording and measuring instruments

The automatic dilution valve from K.E. Tech is a very convenient device that allows you to dilute concentrated water-soluble oil agents with water to any desired concentration simply by opening the valve. It can be used without electricity or air as long as the water pressure is above 0.1 MPa. Typically, it is used attached to a pail or drum, but the KS-ADV2P is a unique product from K.E. Tech that comes with a concentrated solution tank. Since it is difficult to know the remaining amount in a pail or drum, there are inconveniences such as using it unknowingly when it is empty or not knowing when to replace it when it is running low. Additionally, it is necessary to switch from an empty pail or drum each time, which can lead to spills on the floor with the concentrated solution. With the tank for concentrated solution, the remaining amount is easily visible, and you only need to top it off, eliminating the need for frequent replacements. Moreover, it has a capacity of 30 liters, allowing you to refill a pail or a one-gallon can in one go. You can also add options like a float switch or solenoid valve to create an automatic water supply system.

• Municipal services and business location
• others

Semi-dry processing is effective for carbon neutrality. Reducing the consumption of cutting oil decreases CO2 emissions during oil refining. Switching to semi-dry processing significantly reduces the power consumption of coolant pumps. Regular replacement of cutting oil is eliminated, resulting in zero CO2 emissions during waste liquid disposal. It offers higher cooling effectiveness compared to MQL (Minimum Quantity Lubrication) and can accommodate a wide range of materials. Water-soluble cutting oil allows for mist processing, making it suitable for semi-dry processing of aluminum. It supports internal lubrication such as spindle through and turret through.

• Other machine tools

The "KSM-1101 Series" is a two-liquid mist coolant device that combines plant oil and water-soluble cutting fluid. It is a new semi-dry processing method that incorporates the lubrication effect of plant oil and the cooling effect of water-soluble cutting fluid (soluble solution). There are various benefits, such as extending tool life and reducing processing time in cutting operations. 【Features】 ■ Reduction of cutting time is possible ■ Extension of tool life can be achieved ■ Can be installed on various cutting machines ■ Installation is possible without worrying about piping length ■ There are no restrictions on piping (such as joints or bends) *For more details, please refer to the catalog or feel free to contact us.

• Other machine tools

The automatic dilution valve "KS-ADV2/ADV2S/ADV2P" is a very convenient device that draws concentrated liquid using the flow rate of water and mixes it to adjust and manage the optimal dilution concentration. It can be easily attached to a pail or drum and connected to a water supply, allowing diluted liquid to flow out. The concentration can also be easily adjusted with a dial. It can be used anywhere as long as water with a pressure of 0.1 MPa or higher is supplied. 【Features】 ○ Can be used anywhere as long as water with a pressure of 0.1 MPa or higher is supplied ○ High-performance and precise adjustment of mixing ratio from 0 to 35% (However, it may vary depending on the components of the oil) ○ Reduces the burden on the dilution operator and maintains a uniform dilution concentration ○ Can be easily attached to drums, pails, or columns For more details, please contact us or download the catalog.

• valve