サーモフィッシャーサイエンティフィック株式会社／Thermo Fisher Scientific K.K. Product Lineup

The "3M(TM) Liqui-Cel(TM) Membrane Module" is a device that efficiently removes oxygen from liquids and dissolves gases such as carbon dioxide and nitrogen into the liquid. When used for degassing, it can remove over 99.9% of oxygen, and when used for gas dissolution, it can dissolve gases such as nitrogen, hydrogen, carbon dioxide, and oxygen. It is effective not only in the production of functional water and pure water in chemical plants and semiconductor manufacturing facilities but also in the degassing and defoaming of wash water and cooling water. Additionally, its compact and simple structure makes it easy to integrate into existing equipment. Replacing vacuum degassing towers or carbonators can significantly save space and energy. 【Adoption Results in Manufacturing and Analysis Processes】 ■ Carbon dioxide degassing before EDI ■ Carbon dioxide and oxygen degassing of cooling water and analysis water ■ Oxygen and carbon dioxide degassing of boiler and piping water ■ Carbon dioxide degassing of wash water, etc. *For more details, please refer to the catalog available for download in PDF format. Feel free to contact us for inquiries or consultation regarding testing.

Introducing the external pressure type separation membrane module "Liqui-Cel(TM) / SuperPhobic(TM)." It can be installed in a compact space and is easy to expand, featuring degassing and dissolution membranes with a wide range of options available by size and application. In a comparison of processing classes with a water flow rate of 23m3/h, the vacuum degassing tower has dimensions of 9m in height and 9m2 in area, while the "Liqui-Cel(TM) external pressure type separation membrane module" has dimensions of 1.8m in height and 2.5m2 in area, allowing for installation in 1/3 to 1/5 of the space required by existing technologies. [Features] ■ Can be installed in a compact space ■ A wide lineup available by size and application ■ Can be installed in 1/3 to 1/5 of the space required by existing technologies *For more details, please refer to the PDF document or feel free to contact us.

We would like to introduce the benefits of removing chips, grinding powder, and abrasive particles from cutting oil using 3M(TM) filter products. This enables high-quality product processing and prevents clogging in the internal piping of equipment. It also contributes to cost reduction by extending the life of cutting oil. We offer a lineup of "bag type" filters suitable for high flow rates and "cartridge type" filters suitable for low flow rates. 【Product Lineup】 <Bag Type (High Flow Rate)> ■ 3M(TM) PP Non-woven Filter Bag "100 Series, 500 Series" ■ 3M(TM) Heat-sealed Multi-layer Felt "DF Series" ■ 3M(TM) Heat-sealed Felt Filter Bag "NB Series" <Cartridge Type (Low Flow Rate)> ■ Zeta Plus(TM) Adsorption Depth Filter Cartridge ■ Betapure(TM) Polypropylene Non-woven Depth Filter Cartridge "NT-T Series Distributed Flow Type" ■ Micro-Klean(TM) Polypropylene Rigid Depth Filter Cartridge "RT Series" *For more details, please refer to the PDF document or feel free to contact us.

We have introduced an online measurement filter performance evaluation kit using a filtration testing device specialized for the fine particle domain. By analyzing the appropriate filter and replacement time, we contribute to quality improvement and cost reduction. It is capable of analyzing particle sizes of 0.1μm and 0.2μm. It offers excellent flow regulation and accommodates various filter shapes and housings, allowing for the reproduction of various desired conditions. You can visually observe changes in removal rates through real-time monitoring. 【Features】 ■ Online measurement of particle sizes of 0.1μm and 0.2μm ■ Compatible with circulating filtration ■ Visual observation of changes in removal rates through real-time monitoring ■ All necessary functions are included, making it easy to move *For more details, please refer to the PDF document or feel free to contact us.

Our "PPK Series" is a small capsule filter that incorporates a depth-type filter with a rich track record, the PolyPro-Klean(TM) polypropylene nonwoven depth filter. The PolyPro-Klean(TM) polypropylene nonwoven depth filter is thermally welded inside the capsule, allowing it to be directly integrated into manufacturing and cleaning equipment. Additionally, it has a wide filtration range from 0.5μm to 10μm, making it suitable for use as a line filter for small-scale production. 【Features】 ■ Small capsule filter with integrated filter media ■ Compact design ■ Uses small cartridges ■ Utilizes the proven PolyPro-Klean(TM) filter media ■ All wetted parts are made of low-extractable polypropylene *For more details, please refer to the PDF document or feel free to contact us.

Our "EPF Series" is a hydrophilic membrane filter made from polyethersulfone membrane. It can be used with various chemical solutions due to its wide chemical resistance and heat resistance. Additionally, we conduct integrity testing before shipment and perform flushing with 18MΩ ultra-pure water, making it suitable for use with pure and ultra-pure water. 【Features】 ■ Hydrophilic polyethersulfone membrane ■ Wide filtration precision ■ Integrity testing conducted on all units before shipment ■ Pre-shipment flushing with 18MΩ ultra-pure water *For more details, please refer to the PDF document or feel free to contact us.

Our "PEG Series" is an all-polypropylene filter that utilizes Advanced Pleat Technology structure. It is composed entirely of pure polypropylene, with silicone rubber (clear) O-rings available for pure water applications and coated fluorine rubber O-rings for chemical applications. The large filtration area and long service life provide economic benefits. 【Features】 ■ Large filtration area due to Advanced Pleat Technology structure ■ Entirely composed of polypropylene ■ Coated fluorine rubber O-rings also available ■ Strong hard cage ■ Manufactured in an ISO9001 certified factory *For more details, please refer to the PDF document or feel free to contact us.

Our "BDA Series" is a highly durable food-grade sterilizing filter that uses polyethersulfone membranes. By adopting our asymmetric membrane technology "Advanced Pleat Technology," it features a dual membrane structure with an upstream side of 0.65μm and a downstream side of 0.2μm, achieving both high flow rates and long life. Additionally, a 100% integrity test is conducted before shipment, confirming that it meets the established quality standards. 【Features】 ■ Asymmetric polyethersulfone (PES) membrane ■ Excellent sterilization performance ■ Large filtration area due to Advanced Pleat Technology structure ■ Dual membrane structure with upstream side of 0.65μm and downstream side of 0.2μm ■ Flow distribution structure *For more details, please refer to the PDF document or feel free to contact us.

Metal ions in the chemical solution can be reduced to levels below 50 ppt (*). Solvents used in the lithography process, such as PGMEA, and high-purity polymer solutions like BARC can also be effectively removed in a single pass. 【Features】 ■ Long contact time with the chemical solution results in a large ion exchange capacity ■ Minimal metal leaching, leading to reduced pretreatment time and simplified operations ■ Two types of filter media are available to accommodate a wide range of chemical solutions ■ Various sizes are available for screening, scale-up evaluation, and mass production ■ An alternative to metal ion removal using ion exchange resins ■ Combining with other filters from our company may enhance metal removal effectiveness through multi-stage filtration * Results based on our internal testing. * We also provide online product explanations, housing rentals, and chemical analysis support. Please apply through "Contact Us" if interested. Please note that we may not be able to accommodate all requests depending on the content. * Solventum handles personal information in accordance with the personal information handling policy and privacy policy of the company linked below.

The "3M(TM) Filter Housing Type 1HB1" is a stainless steel housing designed for high temperature and high pressure applications. It can accommodate our standard cylindrical cartridge (10 inches, flat type) and is suitable for liquids and gases with line pressures up to 1.96 MPa and temperatures up to 200°C. By combining it with standard filter cartridges, it can reduce initial and running costs, making it suitable for a wide range of applications. 【Features】 ■ Compatible with high temperature and high pressure fluids ■ Reliable sealing with bolt structure ■ Compact design ■ Cost-effective housing *For more details, please refer to the PDF materials or feel free to contact us.

We are proposing "measures against red water and red rust using filtration filters" for sites troubled by red water originating from red rust that has developed inside the piping. By installing filters and their housings in the piping for filtration, it can be implemented with a low budget and short construction period. This is effective in emergency situations or in installation environments where replacing the piping is difficult. Depending on the scale of the equipment, installation environment, and required precision, you can select the appropriate filter and housing from a rich lineup. 【Features】 ■ Selection of filters and housings in 3 steps (flow rate, recommended combinations, model name) ■ Filtration precision can be adjusted by changing the filter ■ A wide range of products available to match connection diameters ■ Direct consultation support by dedicated staff ■ Effective in preventing efficiency decline in heat exchangers and maintaining safety equipment such as emergency showers *For more details, please refer to the PDF materials or feel free to contact us.

The "3M(TM) Filter Housing Type 5EL" is a stainless steel housing designed for general use, capable of holding five rows (1 stage, 2 stages, 3 stages) of standard 10-inch filter cartridges. By using 316 stainless steel and standardizing specifications, this type of housing achieves high chemical resistance and durability at a reasonable price. By combining it with various filter cartridges from our company tailored to customer applications, this product can sufficiently meet the demands for reducing filtration costs across various lines. (This housing is designed for liquid use) 【Features】 ■ The wetted parts are made of 316 stainless steel and PTFE material ■ Reasonable price while standardly using 316 stainless steel ■ The body and cover are secured with V bands, making them easy to remove ■ Adopts a cartridge sealing method with a lightweight cover and spring ■ Side inlet and outlet type, with flanged liquid outlet *For more details, please refer to the PDF document or feel free to contact us.

Our "PBG Series" is an all-polypropylene filter that utilizes Advanced Pleat Technology structure. Made from pure polypropylene, this clean filter can be widely used in the fields of food and beverages. With a large filtration area and long service life, it provides economic benefits. 【Features】 ■ Large filtration area due to Advanced Pleat Technology structure ■ All-polypropylene filter that does not contain adhesives or surfactants ■ Complies with food sanitation law standards ■ Stainless steel reinforced ring used in the O-ring adapter section ■ Manufactured in an ISO9001 certified factory *For more details, please refer to the PDF document or feel free to contact us.

The "3M(TM) Filter Housing 1ZMS_1ZMR Type" is a sanitary type filter housing for one 226 O-ring type filter cartridge. The main material is equivalent to SUS316L, and the inner surface has been buffed to #400 polish followed by electropolishing. Additionally, there is a SIP-compatible "1ZMSF" type available. 【Features】 ■ Equivalent to SUS316L ■ Sanitary specification ■ Inner surface buffed to #400 polish followed by electropolishing ■ Structure with minimal residual liquid *For more details, please refer to the PDF document or feel free to contact us.

This catalog is a comprehensive catalog of the filter products handled by our company. It includes a wide range of applications from water treatment to lubricants and organic solvents, featuring the "D Series," as well as the long-life and economical "RT Series" and "AU Series/AUZ Series," among many others. We also provide flow charts and specifications, so please take a moment to read through it. [Contents] ■ Filters ■ Depth Filters ■ Surface Filters ■ Large Filters ■ Bag Filters *For more details, please refer to the PDF document or feel free to contact us.

The "3M(TM) Filter Housing SCN Type" is a stainless steel housing for general use. It offers a wide variety of built-in configurations and connection diameters. Depending on the fluid, filtration target, and processing volume, you can choose the most suitable product for your filtration needs. 【Features】 ■ Various connection diameters ■ Wide range of product lineup ■ Liquid outlet / side entry, bottom discharge ■ Custom options available for specifying nozzle discharge direction *For more details, please refer to the PDF materials or feel free to contact us.

The "3M(TM) Filter Housing SCG Type" is a general-use stainless steel housing. By standardizing the PTFE gasket seal, it can also be used with organic chemicals. It covers a wide range of built-in numbers, equivalent to 1 to 225 ten-inch cartridges, and offers various connection diameters. 【Features】 ■ Standardized PTFE gasket seal ■ Multiple connection diameters ■ Wide product lineup (cartridge built-in numbers: 1 to 225) ■ Liquid outlet / side entry, bottom discharge ■ Special arrangements can specify the nozzle discharge direction *For more details, please refer to the PDF materials or feel free to contact us.

The "3M(TM) Filter Housing 1ZME Type" is a sanitary type filter housing for one 222 and 226 O-ring type filter cartridge. Compared to the conventional "1ZMS" and "1ZSN" type housings, it offers a more reasonable price. The main material is 304 stainless steel, and it has undergone buffing with #400 grit followed by electropolishing on both the inner and outer surfaces. 【Features】 ■ Equivalent to 304 stainless steel ■ Sanitary specifications ■ Electropolished after #400 grit buffing on the inner surface ■ Structure with minimal residual liquid *For more details, please refer to the PDF document or feel free to contact us.

Introducing the '3M(TM) Filter Housing' of the 8ZP PF1 type. This product is a housing for lab-scale filtration tests. Please choose the surface finish according to the fluid. Our Zeta Plus(TM) plug-in type cartridge can be used. 【Features】 ■ 8ZP PF1 type ■ For lab-scale filtration tests ■ Designed for liquids ■ Compatible with our Zeta Plus(TM) plug-in type cartridge *For more details, please refer to the PDF materials or feel free to contact us.

The "3M(TM) Filter Housing PTW Type" is a stainless steel housing compatible with Zeta Plus(TM) adsorption depth filter cartridges and Zeta Plus(TM) activated carbon adsorption depth filter cartridges. It is designed to maximize the characteristics of the high-performance Zeta Plus(TM) cartridges to reduce the total cost of filtration operations. If you require filtration processing in a particularly clean environment, please use the sanitary type "12ZPW Type." 【Features】 ■ Compatible with Zeta Plus(TM) adsorption depth and activated carbon depth filter cartridges ■ Maximizes the performance of Zeta Plus(TM) cartridges, achieving significant reductions in filtration costs ■ The body and cover are secured by clamps, making it easy to attach and detach the cover *For more details, please refer to the PDF materials or feel free to contact us.

The "3M(TM) Filter Housing KMS Type" is a dedicated housing that brings out the high flow characteristics of the 3M(TM) High Flow Polypropylene Pleated Filter Cartridge High Flow Series. The housing has a compact design, requiring less installation space, making it easy to expand and reducing investment costs. Additionally, easy access to the interior allows for quick filter replacement, leading to reduced operational costs. 【Features】 ■ High flow and compact ■ Easy access to the interior ■ Hinged lid *For more details, please refer to the PDF document or feel free to contact us.

The "3M(TM) Filter Housing 1BSR1-TW-25" is different from the standard single housing that is suspended from piping, as it allows for filter replacement by opening the upper cover. Even when the upper cover is removed, the filter body remains attached to the housing, making the replacement process easy. Additionally, since the filter can be replaced from the top of the housing, it prevents liquid leakage and dripping during replacement, thus preventing contamination in the workspace. 【Features】 ■ Improves work efficiency ■ Easy filter installation from the top ■ No spills during filter replacement from the top ■ Made of stainless steel for general use ■ Compatible with our double open end filter cartridges *For more details, please refer to the PDF document or feel free to contact us.