日本ヒーター List of Products and Services

The GT5 type heater features a heating element made of stainless steel (SUS316L) with a diameter of 48.6mm. Its simple shape makes it resistant to scale buildup and easy to clean. It is used for heating cleaning solutions that are difficult to clean or heavily soiled. 【Features】 ○ Heater for heating in water, oil, and cleaning solutions ○ Sister product of the GA5 type heater For more details, please contact us or download the catalog.

• Other heaters

The PLT5 type heater has a heating element made of a stainless steel (SUS316L) tube with an outer diameter of 48.6 mm. Compared to the GA5 type screw-in heater and PL5 type plate flange heater that use standard outer diameter 12 mm sheath heater elements, the heater element is cylindrical and has a simple shape. This makes it less prone to scale (deposits and dirt that precipitate and adhere from the heated liquid) and easy to clean. It can be used for heating cleaning liquids that are difficult to clean or heavily soiled. 【Features】 ○ Easy installation with a standard flange ○ Flange size is JIS 5K 50A ○ Resistant to scale For more details, please contact us or download the catalog.

• Other heaters

The "SOP type" oil preheater is a heater that warms low-quality oil to make it more combustible. It has a built-in thermostat with a scale of 30 to 110°C. 【Features】 ○ Compact, lightweight, and high performance ○ Easy temperature adjustment with the built-in thermostat Variable dial with a scale of 30 to 110°C ○ Direct connection without an electromagnetic switch ○ ON-OFF control of the heater with the built-in thermostat For more details, please contact us or download the catalog.

• Other heaters

Stainless Steel Submersible Heater "YDS Type" comes with a waterproof tube covering the power cord, allowing it to be submerged in liquid without any modifications to the tank, making it ready for immediate use. The structure is also filled with ceramic powder in a stainless steel pipe, making it sturdy and highly durable. 【Specifications】 ○ The power cord is standard at 3.5m (the waterproof tube is 2m), with a plug included. ○ A 70×70 plate is attached to prevent the heating element from coming into contact with the tank (with two supports). ○ Please use at a continuous temperature of 50 degrees Celsius or lower. For more details, please contact us or download the catalog.

• Other heaters

The titanium submersible heater "YDT type" has a waterproof tube covering the power cord, allowing it to be submerged in liquid without any modifications to the tank, making it ready for immediate use. Its structure features titanium pipes filled with ceramic powder, providing high corrosion resistance even in corrosive liquids such as seawater. 【Specifications】 ○ The power cord is standard at 3.5m (including a 2m waterproof tube), with a plug included. ○ It comes with a 70×70 plate to prevent the heating element from coming into contact with the tank (at two locations). ○ Please use it at a continuous operating temperature of 50°C or lower. For more details, please contact us or download the catalog.

• Other heaters

The "YSL type" is a heater designed to maintain the temperature of the liquid inside large tanks (primarily to prevent freezing). The control box consists of a leakage circuit breaker, electromagnetic contactor, electronic temperature controller, etc. Once the power is connected and the temperature is set, temperature control can be achieved immediately. The installation method involves inserting the heater from the top of the large tank and securing it with a mounting flange. It can be used outdoors. 【Specifications】 ○ Power supply: 3-phase 200V ○ Dimensions → H: allowable range of +10mm, -10mm → L: allowable range of +0mm, -10mm ○ Material → Flange: SUS304 JIS5K150A → Heater: SUS316L OD12 surface polished → Terminal box: SS blue painted ○ Watt density: 3W/cm² For more details, please contact us or download the catalog.

• Other heaters

The far infrared paint drying machine "ADT-51αL" demonstrates excellent effects on putty, two-component primer (undercoat), water-based primer, and topcoat paint (10:1 to 2K). The wavelength of infrared is very close to the thermal absorption rate of the paint film, resulting in minimal reflection on the surface and efficiently and rapidly drying the entire paint film. It exhibits outstanding thermal absorption properties from two-component urethane paint to thermosetting paint, powder paint, and water-based paint. 【Features】 ○ Outstanding thermal efficiency ○ Simple operation and work procedures ○ High work efficiency ○ Excellent safety For more details, please contact us or download the catalog.

• Drying Equipment

The "QA type" air high-temperature heater is a cylindrical heater that supports a heater element wrapped with nichrome wire around a ceramic insulator, using quartz glass. The protective casing is a stainless steel pipe with heat dissipation holes. 【Features】 - The heater part has an extremely compact structure. - The hot air outlet is made of quartz glass, providing excellent heat resistance. - Depending on the shape of the object to be heated, three types of outlets can be selected: straight round, flat, and spot types. - It has a fast startup time, allowing for high temperatures to be blown out in a short time after switching on. For more details, please contact us or download the catalog.

• Heating device

The "GAA5 type" screw-in heater for air heating features a low watt density (2.5W/cm2) and is designed for air heating with a screw-in installation. 【Features】 ○ The gas contact part is made of stainless steel, ensuring cleanliness. ○ It is plug-type, making installation and replacement easy. ○ It can achieve any desired power in a small space. For more details, please contact us or download the catalog.

• Other heaters

The QIR-type heater is a "lamp heater" developed to utilize near-infrared radiation. It has a fast heat-up time and can obtain very clean energy due to its structure. The peak of its radiation energy spectrum is between 0.9 and 1.6 micrometers, making it effective for non-contact heating, especially in vacuum heating applications. 【Specifications】 ○ Shape: Standard is straight → Custom products will be made for shapes other than straight ○ Heater element outer diameter: OD10mm ○ Lead wire: Glass braided silicone-coated wire (LG wire) length 200mm For more details, please contact us or download the catalog.

• Other heaters

Aluminum cast heaters are made by casting a sheath heater, which provides good thermal conductivity and uniform heating. They are used when you want to effectively utilize the inside of a tank or vessel, especially when direct heater insertion is not possible due to flammability or corrosion issues. They are mounted on the bottom or sides of the vessel and provide indirect heating from the outside. This eliminates the need to drain the liquid for maintenance. The heater mounting surface is machined. 【Product Lineup】 ○ Aluminum Cast Heater ALC Type ○ Aluminum Embedded Heater ALF Type ○ Aluminum Plate Heater ALP Type For more details, please contact us or download the catalog.

• Other heaters

The "CCD type" case-style drum can heater is a robust, movable heater for drum cans, equipped with insulation and temperature control. It is designed for heating and maintaining the temperature of contents in 200-liter drum cans, making it easier to extract high-viscosity liquids and solidified materials. 【Features】 ○ The main heater is equipped with casters, allowing it to be set up without moving the drum can. ○ It has a sturdy metal case designed for use on-site. ○ It comes with a digital temperature control unit that allows for precise control of any desired temperature. ○ Standard insulation minimizes heat loss. ○ It includes a leakage circuit breaker for enhanced safety. For more details, please contact us or download the catalog.

• Other heaters

The micro heater "MC type" is a sheath tube type heater designed to be wrapped around metal surfaces for indirect heating. It is thin, flexible, and can withstand temperatures up to 500°C. 【Features】 - Flexible and compact! Easy installation - Easy to bend and can be installed in complex locations - Rapid temperature rise of the heater, with high thermal efficiency For more details, please contact us or download the catalog.

• Other heaters

The mantle heater "RG type" securely wraps heating wires covered with glass fiber along with insulation material using glass cloth, and is sewn with glass fiber threads. It flexibly fits laboratory glassware such as flasks, beakers, and funnels. If you specify the shape as a custom order, it can be sewn to fit vacuum pumps, vacuum chambers, valves, special tanks, piping, and other shapes. It is a heater that flexibly fits and can easily heat and maintain the temperature of objects of any shape. 【Specifications】 ○ Power supply: Single-phase 100V ○ Lead wire: Length 400mm ○ Insulation: Thickness 20mm ○ Heat resistance temperature: Continuous use 350℃ (momentary 450℃) For more details, please contact us or download the catalog.

• Other heaters

The Ribbon Heater "RR type" is a strip-shaped heater used along areas that require heating or insulation. The heating element, covered with fiberglass, is securely sewn onto glass cloth and wrapped with an outer layer of glass cloth. There are two sewing methods: single stitch (S) and double stitch (W). A mounting "string" (made of fiberglass) is sewn on. It can be fixed simply by wrapping it around the piping and tightening it with the string. The standard heat resistance temperature is 350°C. Custom products for high temperatures (heat resistance temperature of 700°C) can also be manufactured. 【Specifications】 ○ Thickness: t=2mm ○ Length of string: 500mm ○ Lead wire: standard 500mm (nickel wire) ○ Heat resistance temperature: 350°C ○ Power terminals: For 100V: plug (parallel 15A) For 200V: M4 round terminal For more details, please contact us or download the catalog.

• Other heaters

The "RSD/RSDP type" drum, pail, and one-gallon can heating heater is designed to facilitate the easy extraction of high-viscosity liquids and solidified materials contained in drums. By heating substances such as grease, asphalt, paint, wax, oil, varnish, chocolate, paraffin, and butter inside the can, the viscosity can be reduced, allowing for the liquid to be drawn out. This also minimizes the capacity required for the suction pump. [Types] ○ For heating drum cans: RSD-11PSE ○ For heating pail and one-gallon cans (common use): RSDP-10PSE For more details, please contact us or download the catalog.

• Other heaters

The digital temperature control device "monoOne-120T" is a temperature control unit that allows for easy temperature regulation. It is compact and easy to carry, making it convenient for experiments in laboratories or maintenance in factories. The power switch (ON-OFF), indicator light, temperature control, and temperature display are all integrated, so only the connections for the power supply, heater, and sensor are needed. 【Features】 ○ High precision temperature control is possible with PID control ○ Auto-tuning function is included as standard ○ Temperature monitoring function allows for simultaneous display of two temperatures → Equipped with over-temperature prevention function ○ Timer function enables automatic ON or OFF ○ Alarm output is included For more details, please contact us or download the catalog.

• Temperature and Humidity Control

Self-regulating code heater "TLT type / HTLT type" is a heater cable composed of semiconductor heating elements arranged in a continuous parallel circuit, which has a self-temperature control function. The heating element automatically adjusts its heat output in response to changes in its own temperature. The power per meter (W/m) remains the same regardless of where it is cut. 【Features】 ○ Safe and economical due to automatic adjustment of output ○ Easy to install; can be cut to the required length on-site, and the heater power per unit length (W/m) is the same regardless of where it is cut → However, a separately sold "terminal processing kit" is required for cutting and use ○ The insulation material coating is excellent in water resistance and chemical resistance ○ Can be overlapped For more details, please contact us or download the catalog.

• Other heaters

The silicone rubber heater "RSP type" is a heater that can be easily attached for insulation or heating of containers with complex shapes. Silicone rubber heaters are flexible and lightweight, and they have excellent heat resistance and cold resistance compared to other organic rubbers. 【Features】 ○ A flexible, thin surface heating element that replaces metal heaters ○ It can fit onto curved surfaces and cylinders, allowing for good heat conduction and high efficiency For more details, please contact us or download the catalog.

• Other heaters

The "V-type" band heater is a heater designed to heat cylindrical objects. It can provide wide surface heating tailored to the shape of the object being heated and can be manufactured in various custom shapes. It is widely used for heating resins in injection molding machines, extrusion machines, and hot presses. 【Features】 ○ Can provide wide surface heating according to the shape of cylindrical or tubular objects ○ Custom-made, can be manufactured in various shapes including hole processing and box shapes For more details, please contact us or download the catalog.

• Other heaters

The bolt heater (special cartridge heater) "CTB type" can significantly reduce gaps and leaks between metal parts when they are attached with bolts. It is used for large bolts to prevent loosening in high-pressure turbines and similar applications. 【Features】 - Attaches metal parts with bolts, greatly reducing gaps and leaks between metals. - When the power to the heater is cut and it cools down, the bolt contracts, further reducing gaps and leaks between metals. - Used for large bolts in high-pressure turbines and other applications. For more details, please contact us or download the catalog.

• Other heaters

The silicone cord heater "RSC type" is a heater that integrates heating wires with silicone rubber. It boasts excellent electrical insulation, heat resistance (up to 180°C), and cold resistance (down to -30°C), ensuring high safety. Additionally, it is highly flexible, allowing for close attachment to any shape. 【Features】 ○ A heater for insulating and heating pipelines and tanks ○ The range of electrical resistance R [Ω] for heater production is from 10Ω/m to 5000Ω/m ○ Custom manufacturing is available for items other than the standard model For more details, please contact us or download the catalog.

• Other heaters

The "RSD/RSDP type" drum, pail, and one-gallon can heating heater is designed to easily extract high-viscosity liquids and solidified materials from drums. By heating substances such as grease, asphalt, paint, wax, oil, varnish, chocolate, paraffin, and butter inside the can, the viscosity can be reduced, allowing for easier liquid extraction. This also minimizes the capacity required for the suction pump. 【Specifications】 ○ Complies with the Electrical Appliance and Material Safety Law (PSE) ○ The power cord is standard at 2 meters, with a plug (for single-phase 100V) ○ Can be easily installed with a one-touch fastening mechanism and fittings For more details, please contact us or download the catalog.

• Other heaters

The "QIA type" infrared heater with a reflective hood quickly heats, dries, and cures objects directly without warming the air in between. Additionally, the reflective hood allows for irradiation only in the forward direction. Since the heater surface is not treated with coatings, there is no concern about peeling, making it safe for use in food-related applications. 【Specifications】 ○ The irradiation part is made of opaque quartz. ○ Comes standard with a stainless steel reflective hood. ○ Installation should be horizontal as a principle. For more details, please contact us or download the catalog.

• Other heaters

The "SHH-UT type" heater for installation inside control panels is designed to be mounted inside the control panel to protect it from moisture and condensation, while maintaining a high level of electrical insulation resistance. Since the heater and the mounting legs are integrated, there is no need to create separate legs for installation, making it very convenient. The mounting hole section can be doubly insulated with the included bushing insulator, ensuring safety. 【Specifications】 ○ Power Supply/Voltage: 100V/200V, Single Phase ○ Material: Bonded Steel Plate → Additionally, custom products made of SUS304 and SUS430 are also available. ○ Installation: Uses bushing insulator BSN-16 For more details, please contact us or download the catalog.

• Other heaters

The "CTA type" cartridge heater is a compact rod-shaped heater designed to heat air and gas. It is ideal for applications such as duct heaters, heating devices, thermal sources for industrial equipment, and heating air and other gases. It can also be applied to shell-type heaters integrated into casings. 【Features】 ○ Ideal for situations where there are constraints on the dimensions of containers or installation locations and a compact heater is desired. ○ Best suited for heating gases in piping with low flow rates. ○ Superior to exposed nichrome wire heaters in terms of electrical safety, pressure resistance, and applicability to various atmospheres. For more details, please contact us or download the catalog.

• Other heaters

The "IRP type" clean heater is a panel-type heater made of stainless steel that combines far-infrared radiation ceramic heaters, allowing you to choose the size and capacity. It has no dust-generating elements, is resistant to thermal shock, and excels in cold and heat cycle resistance. 【Specifications】 ○ A single panel can be used with a ceramic heater element with a power supply voltage of 200V and a power of 400W (100mm × 200mm). ○ The porcelain (ceramic) is coated with glaze (far-infrared radiation ceramics). ○ Continuous operating temperature is 500 degrees Celsius. For more details, please contact us or download the catalog.

• Other heaters

The "PLA5 type" air heating plate flange heater is a heater designed to heat flowing pressurized air, gas, etc. It is used as a heat source for drying parts in cleaning machines, air blowers, and other industrial equipment. 【Features】 - Achieves any desired power in a small space - Uses standard flanges, making it easy to obtain compatible flanges, and installation and replacement are simple - The gas contact parts are made of stainless steel, ensuring cleanliness For more details, please contact us or download the catalog.

• Other heaters

The "Titanium Plate Flange Heater PTIL5" is a product that uses titanium for all parts in contact with liquids, enhancing its corrosion resistance. It can efficiently heat and maintain the temperature of liquids that require corrosion resistance, such as alkaline chemical agents, weakly acidic liquids, seawater, and hot spring water. It uses standard flanges, so no special tools or jigs are required for installation! 【Features】 ■ Usable in areas where pressure is applied ■ Standard product, so it is inexpensive and has a short delivery time ■ Various options available, including built-in thermostat for preventing overheating, waterproofing, and with cord ■ Custom orders for large sizes and capacities are also accepted ■ 5kW heaters (PTIL5-3545, PTIL5-3570) are available in stock *For more details, please download the catalog or contact us.

• Other heaters

The "SP type" pure water heater is a high-performance pure water heater that heats pure water to 70-90°C to enhance cleaning effectiveness. It is used in the cleaning processes of semiconductor and LCD manufacturing, where pure water is used instead of solvents like Freon. It features a full panel design suitable for clean rooms and can be connected to cleaning equipment for remote operation. 【Specifications】 ○ The heater element and liquid-contact parts are treated with electrolytic polishing to suppress the leaching of impurities into the pure water. ○ Compared to heating devices using quartz heaters and quartz tanks, it is robust and achieves significant cost reduction. ○ Four casters (with adjustable bolts) make it easy to move for installation, maintenance, and regular inspections. For more details, please contact us or download the catalog.

• Heating device

The acid-resistant quartz immersion heater "YDQ type" has a waterproof tube covering the power cord, allowing it to be submerged in liquid along with the cord. It can be used immediately without modifying the tank. Since it uses a quartz tube, it is suitable for heating acidic liquids that are corrosive to metals or that dislike metal ions. 【Specifications】 ○ The power cord is standard at 3.5m (including a 2m waterproof tube), with a plug included. ○ The standard type does not have a protective tube for the quartz heater. ○ Please use at a continuous operating temperature of 50°C or lower. For more details, please contact us or download the catalog.

• Other heaters

The "CTL type" cartridge heater for liquid heating is a compact rod-shaped heater designed to heat liquids. It is ideal for situations where there are constraints on the dimensions of the container or installation space and a compact heater is desired. 【Features】 ○ Can be used for heating water, oil, and various chemical solutions ○ Can also be applied to shell-type heaters incorporated into casings For more details, please contact us or download the catalog.

• Other heaters

The GXT4 type heater features a heating element made of a stainless steel SUS316L tube with an outer diameter of 34mm. Its simple shape makes it resistant to scale buildup and easy to clean. It is used for heating cleaning solutions that are difficult to clean or heavily soiled. 【Specifications】 ○ Power supply: Voltage 200V three-phase, with connection terminals ○ Dimensions: Neck length (L) tolerance +0, -10mm, non-heating section (Ln) 50mm ○ Mounting screw: Pipe parallel thread PF 1 1/2: 40A (1 1/2 inches) ○ Material: Heater pipe: SUS316L (OD34 surface polished) Plug: Bs Cap: Phenolic resin, non-waterproof, rotatable detachable For more details, please contact us or download the catalog.

• Other heaters

The "YTF type" is a Teflon-coated sheath heater that excels in chemical resistance and is used for heating hydrofluoric acid, phosphoric acid, and alkaline solutions. 【Features】 - High chemical resistance - Electrically safe - High thermal efficiency - Easy to install - Short delivery time For more details, please contact us or download the catalog.

• Other heaters

The acid-resistant quartz L-type heater "YQIL type" has a narrower selection range for dimensions and heater power compared to custom-made products, but by standardizing the product, we achieve short delivery times and low prices by keeping semi-finished products in stock. 【Features】 ○ Short delivery times and low prices ○ Reduced risk of damage ○ Lower transportation costs For more details, please contact us or download the catalog.

• Other heaters

The "ON-OFF type TCO" and "Thyristor type TCS" are control panels for heaters that control the temperature of heated materials. If "I bought an electric heater, but the temperature control is not working well...", the performance of the heater cannot be fully utilized. Additionally, for processes that require stable, high-quality heating with good yield, a control panel (control system) that is optimal for that heating system is necessary. 【Features】 ○ Electric heater control panels equipped with ON-OFF or thyristor (SCR) control and basic safety devices. ○ By designing and manufacturing the electric heater and control panel as a set, temperature control that meets customer requirements is possible. For more details, please contact us or download the catalog.

• Control Panel

The Compact Thermo "TCT Type" is a thyristor temperature control unit that allows for easy temperature control as a power source for electric heaters. It can be used as a controller (power supply) for space heaters, band heaters, ribbon heaters, micro heaters, cartridge heaters, ink heaters, mantle heaters, silicone rubber heaters, and more. 【Features】 - Compact and easy to carry, making it convenient for experiments in laboratories and maintenance in factories. - High precision temperature control is achievable through thyristor phase control. - Automatic tuning function allows for automatic PID setting. - The power switch (ON-OFF), indicator light, temperature adjustment, and temperature indication are all integrated, eliminating the need for complex wiring. For more details, please contact us or download the catalog.

• Temperature and Humidity Control

The "T-type" thermostat automatic temperature controller is used for temperature control or overheating prevention in dryers, heating devices, and various factory equipment. It utilizes the expansion and contraction of liquids or metals to adjust the temperature continuously. 【Specifications】 ○ The liquid expansion thermostat can directly switch on and off large capacities (15A to 30A). ○ The heat resistance temperature of the thermostat body is 80°C for Robertshaw products and 120°C for EGO products. ○ The minimum bending radius of the capillary tube is 25mm for Robertshaw products and 5mm for EGO products. ○ There are types that use a stuffing box (R1/4, R3/8) for fixing the capillary tube. For more details, please contact us or download the catalog.

• Temperature and Humidity Control

The slide-type voltage regulator "TR type" is a convenient device for easily changing the capacity of heaters used for testing and experimentation. It can output voltage in a distortion-free waveform corresponding to the input sine wave voltage. The output voltage can be continuously adjusted without steps, allowing for any desired output voltage to be obtained. 【Specifications】 ○ Indoor stationary type ○ Equipped with a scale plate ○ Usable at both 50Hz and 60Hz frequencies ○ Ambient environment: Temperature 0–40 degrees Celsius, Humidity 35–93% ○ 100V female outlet: Included only with TRSA-5 and TRSA-10 models For more details, please contact us or download the catalog.

• Other process controls

The acid-resistant quartz heater "YQI type" uses quartz tubes, making it suitable for heating chemical solutions that are sensitive to metal ions or acidic liquids that would corrode metals. It can be used immediately by simply dropping it in from above. 【Specifications】 ○ The power cord is standard at 1.8m, with a plug included. ○ The standard type does not come with a protective tube for the quartz heater. ○ The continuous operating temperature is approximately 70 degrees Celsius (varies depending on the liquid). For more details, please contact us or download the catalog.

• Other heaters

Thermal conductive cement is a paste-like, non-metallic, inorganic cement primarily composed of high-purity graphite, which has high thermal conductivity. It is used as a thermal conductive material when attaching steam jacket pipes or electric heaters to process pipes, such as wrapping the heater around the pipe for heating, or when installing on flat surfaces, where normally there would be line contact. However, applying thermal conductive cement to the heater section improves thermal conductivity. Cans are available in sizes of 1kg, 5kg, and 30kg. For more details, please contact us or download the catalog.

• Machinery and equipment installation/dismantling/relocation
• valve

By simply connecting to a JIS standard flange, it can be directly heated without changing the liquid flow path, allowing for a flow rate of up to 500 L/min. It can be easily integrated into existing piping, eliminating the need to establish a separate piping line, and can be used as an additional heat source for plant facilities. It is also suitable for outdoor use.

• Other heaters
• Heating device
• Water treatment equipment

By simply connecting to a JIS standard flange, it can be directly heated without changing the liquid flow path, allowing for a flow rate of up to 10m³/min. It can be easily integrated into existing piping, eliminating the need to establish a separate piping line, and can be used as an additional heat source for plant facilities. It is also usable outdoors.

• Other heaters
• Heating device
• Heat exchanger

Hot slots are heaters used to achieve reproducibility and uniformity of temperature distribution in hot runner nozzles and for heating silicon wafers, among other applications. They enable uniform temperature distribution with thin plate thickness.

• nozzle
• Plastic Mould
• Wafer

The "Inline Heater" series is a heater that can efficiently heat water, oil, air, gas, and other fluids within pipes. It can be connected to JIS standard flanges and can be integrated into existing equipment. This feature eliminates the need for new piping construction, allowing for a lower-cost installation compared to conventional heaters. It is suitable as an additional heat source for plant facilities. Additionally, there are various sizes of inline heating heaters available depending on the type of fluid, temperature, and flow rate. 【Features】 ■ Direct heating without changing the flow path of liquids or gases ■ Prevents pressure loss and efficiently heats fluids ■ Supports large flow rates of up to 500L/min for liquids and 10m³/min for gases ■ Usable both outdoors and indoors ■ A heater controller with over-temperature prevention function up to 10kW is also available as an optional item *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Heating device
• Other heaters
• Water treatment equipment