津川製作所 Product Lineup

The "KM77-0712" is a DC motor that can be easily installed. This product comes with a base type, has a rotation speed of 2,500 rpm, and its dimensions are φ77×100. We also offer other effective and efficient motors. Please feel free to consult us. 【Features】 ■ Base type ■ Easy installation *For more details, please refer to the catalog or feel free to contact us.

• Other Machine Parts

The "KL60-0512" is a DC electric cylinder that generates thrust in a linear direction. It can be used with the same force for both pushing and pulling. By switching the polarity of the power supply, you can alternate between pushing and pulling. We also offer a variety of motors and related products, so please feel free to consult with us. 【Features】 ■ Capable of generating linear thrust ■ Usable with the same force for both pushing and pulling ■ Can switch between pushing and pulling by changing the power supply polarity *For more details, please refer to the catalog or feel free to contact us.

• Other Machine Parts

This brush-equipped motor-driven driver allows for easy control of variable motor speed and forward/reverse rotation, and since it is equipped with a microcontroller, it can also be upgraded as a custom driver.

• controller
• Generators and transmission motors

★ DC 180V can be provided by AC 220V rectification ★ Comes with a base (mounting plate) ★ Easy to install on various devices ★ Can be used as a generator ◆ Output = 300W ◆ Speed = 2500 ± 10% rpm ◆ Dimensions = φ130mm × 200mm (mounting plate: with base) ◆ Both side brackets = made of AC ◆ Pipe + base = STKM manufactured with painted finish ◆ Shaft = made of S45C, 15mm

• Other industrial robots
• Other conveying machines
• Other processing machines

◆Voltage = DC 12V ◆Output = 70W ◆Rotation speed = 2500 ± 10% rpm ◆Dimensions = φ77mm × 100mm (Mounting plate: with base) ◆Both side brackets = Made of ADC ◆Pipe + base = Finished with STKM coating ◆Shaft = Made of S45C, φ8mm ◆Easy to install on various devices ◆Ideal for battery operation ◆Comes with a base (mounting plate) ◆Can be used for various DIY devices, power generation equipment, carts, etc. ◆Operates on DC 12V

• DC Motor

【Specifications and Main Functions】 - Power supply voltage DC12V to 24V (60W class) - PWM control (carrier frequency 10KHz) - Overcurrent detection (approximately 0.9A to 10A); when overcurrent is detected, LED3 lights up, and it can be reset with SW3 - With DSW-1 ON, regenerative braking (no holding force) - In case of thermistor error, the board will stop due to heat near SMT1 exceeding approximately 70 degrees (LED2 lights up). Recovery is done with SW3 - With DSW2 ON, external VR speed adjustment is possible

• controller
• Other semiconductors
• Printed Circuit Board

◆Output: 70W ◆Voltage: DC 12V ◆Weight (after assembly): 1kg ◆Size (mm): φ77×100 ◆Rotation speed: 2500±10% ◆Parts composition: 　・Assembly manual × 1 　・Rotor × 1 　・Commutator (included with rotor) × 1 　・Bracket (ADC) × 2 　・Rocking plate × 1 　・Brush holder × 2 　・Brush spring × 2 　・Brush × 2 　・Color 2t × 1 　・M5×105 (+ screws) × 2 　・M4 screws × 2 　・Wave washer × 1 　・Lead wires × 2 　・Ball bearings × 2 　・Pipe × 1 (with permanent magnet) 　・Coil × 1 set 　・Grommet × 1 　・Lumiere paper, wedges × 12 each 　・For assembly, a soldering iron, screwdriver, ohmmeter, and ammeter are required.

• Assembly Machine
• Other industrial robots
• others

◆Voltage = DC 12V ◆Output = 70W ◆Rotational speed = 2500 ± 10% rpm ◆Dimensions = φ77mm × 100mm ◆Brackets on both sides = Made of ADC ◆Pipe = Finished with STKM coating ◆Shaft = Made of S45C, φ8mm ◆Ideal for battery operation ◆Operates on DC 12V ◆Can be used as a generator ◆Can be used for wind power generation ◆Can be used for generator carts of homemade machines

• DC Motor

This is a general-purpose motor that operates on DC 12V. It can be used for various DIY devices, generators, carts, etc. It can also be used as a generator, making it suitable for wind power generation.

• Assembly Machine
• Other industrial robots
• others

◆Voltage = DC 3V ◆Output = 3W ◆Rotation speed = approximately 100 rpm ◆External dimensions = φ60mm × 100mm ◆Both side brackets = made of ADC ◆Pipe = made of acrylic ◆Shaft = made of S45C, φ4mm

• Assembly Machine
• Other industrial robots
• Other conveying machines

◆Operates on DC12V ◆Linear motion achieved by battery power ◆Motor section uses a DC motor ◆Speed control is easy ◆Operates solely with electrical wiring ◆Voltage = DC12V ◆Thrust = 50 kgf ◆Speed = 20 mm/second ◆External dimensions (main body) = □60 mm × 130 mm ◆Bracket section = Made of ADC ◆Pipe section = STKM with painted finish ◆Rod section = STKM with chrome plating finish.

• Actuator

The SA-001U unipolar driver is equipped with a pulse generator in the circuit, allowing for speed control of the motor and enabling both forward and reverse rotation. It can also be used to replace small DC geared motors.

• Other safety equipment
• Printed Circuit Board
• Other Boxes

★Driver for DC brush motors ★CPU Ver: SC_DC_DRV_V00 ★With DSW-1 ON, regenerative braking (no holding force) ★In case of thermistor error, the system will stop due to heat near SMT1 on the board exceeding approximately 70 degrees (LED2 lights up). Recovery is via SW3 With DSW2 ON, external VR speed adjustment is possible.

• controller
• Other semiconductors
• Printed Circuit Board

★ Compatible with universal boards with a 2.54mm pitch ★ Supports DC power supply from 5V to 30V ★ RS232 communication with 2 ports (equipped with driver/receiver IC) ★ Can use RENESAS emulators E7, E8, E10 as is ★ Comes standard with serial EEPROM! AT24C256N-10PI-2.7 ★ CPU: HD64F3687H ★ 20MHz clock implemented ★ ROM: 56Kbyte ★ RAM: 4Kbyte ★ 45 general-purpose I/O pins (3 of the 8 pins in port 8 are reserved for on-board debugging) ★ 8 pins dedicated for input (also used for analog input)

• controller
• Other semiconductors
• Printed Circuit Board